jwap003 |\
pb42 |\
pb44 |\
-routerstation)
+routerstation|\
+wpe72)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
*WP543)
name="wp543"
;;
+ *WPE72)
+ name="wpe72"
+ ;;
*"WNDR3700/WNDR3800/WNDRMAC")
wndr3700_board_detect "$machine"
;;
CONFIG_AR71XX_MACH_WNDR3700=y
CONFIG_AR71XX_MACH_WNR2000=y
CONFIG_AR71XX_MACH_WP543=y
+CONFIG_AR71XX_MACH_WPE72=y
CONFIG_AR71XX_MACH_WRT160NL=y
CONFIG_AR71XX_MACH_WRT400N=y
CONFIG_AR71XX_MACH_WZR_HP_AG300H=y
CONFIG_ATH79_MACH_WNDR3700=y
CONFIG_ATH79_MACH_WNR2000=y
CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y
CONFIG_ATH79_MACH_WZR_HP_AG300H=y
select AR71XX_DEV_LEDS_GPIO
select AR71XX_DEV_USB
+config AR71XX_MACH_WPE72
+ bool "Compex WPE72 board support"
+ select SOC_AR724X
+ select MYLOADER
+ select AR71XX_DEV_M25P80
+ select AR71XX_DEV_GPIO_BUTTONS
+ select AR71XX_DEV_PB42_PCI if PCI
+ select AR71XX_DEV_LEDS_GPIO
+ select AR71XX_DEV_USB
+
config AR71XX_MACH_WRT160NL
bool "Linksys WRT160NL board support"
select SOC_AR913X
obj-$(CONFIG_AR71XX_MACH_WNDR3700) += mach-wndr3700.o
obj-$(CONFIG_AR71XX_MACH_WNR2000) += mach-wnr2000.o
obj-$(CONFIG_AR71XX_MACH_WP543) += mach-wp543.o
+obj-$(CONFIG_AR71XX_MACH_WPE72) += mach-wpe72.o
obj-$(CONFIG_AR71XX_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_AR71XX_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_AR71XX_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
--- /dev/null
+/*
+ * Compex WPE72 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include<asm/mach-ar71xx/ar71xx.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-pb42-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+
+#define WPE72_GPIO_RESET 12
+#define WPE72_GPIO_LED_DIAG 13
+#define WPE72_GPIO_LED_1 14
+#define WPE72_GPIO_LED_2 15
+#define WPE72_GPIO_LED_3 16
+#define WPE72_GPIO_LED_4 17
+
+#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wpe72_leds_gpio[] __initdata = {
+ {
+ .name = "wpe72:green:led1",
+ .gpio = WPE72_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led2",
+ .gpio = WPE72_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led3",
+ .gpio = WPE72_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led4",
+ .gpio = WPE72_GPIO_LED_4,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:diag",
+ .gpio = WPE72_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPE72_GPIO_RESET,
+ }
+};
+
+static const char *wpe72_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wpe72_flash_data = {
+ .part_probes = wpe72_part_probes,
+};
+
+static void __init wpe72_setup(void)
+{
+ ar71xx_add_device_m25p80(&wpe72_flash_data);
+ ar71xx_add_device_mdio(0, 0x0);
+
+ ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
+ ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+
+ ar71xx_add_device_eth(0);
+ ar71xx_add_device_eth(1);
+
+ ar71xx_add_device_usb();
+
+ pb42_pci_init();
+
+ ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
+ wpe72_leds_gpio);
+
+ ar71xx_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpe72_gpio_keys),
+ wpe72_gpio_keys);
+}
+
+MIPS_MACHINE(AR71XX_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
AR71XX_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
AR71XX_MACH_WNR2000, /* NETGEAR WNR2000 */
AR71XX_MACH_WP543, /* Compex WP543 */
+ AR71XX_MACH_WPE72, /* Compex WPE72 */
AR71XX_MACH_WRT160NL, /* Linksys WRT160NL */
AR71XX_MACH_WRT400N, /* Linksys WRT400N */
AR71XX_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
case DEVID_COMPEX_WP543:
ar71xx_prom_append_cmdline("board", "WP543");
break;
+ case DEVID_COMPEX_WPE72:
+ ar71xx_prom_append_cmdline("board", "WPE72");
+ break;
default:
printk(KERN_WARNING "prom: unknown device id: %x\n",
mylo->did);
--- /dev/null
+/*
+ * Compex WPE72 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include<asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WPE72_GPIO_RESET 12
+#define WPE72_GPIO_LED_DIAG 13
+#define WPE72_GPIO_LED_1 14
+#define WPE72_GPIO_LED_2 15
+#define WPE72_GPIO_LED_3 16
+#define WPE72_GPIO_LED_4 17
+
+#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wpe72_leds_gpio[] __initdata = {
+ {
+ .name = "wpe72:green:led1",
+ .gpio = WPE72_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led2",
+ .gpio = WPE72_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led3",
+ .gpio = WPE72_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led4",
+ .gpio = WPE72_GPIO_LED_4,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:diag",
+ .gpio = WPE72_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPE72_GPIO_RESET,
+ }
+};
+
+static const char *wpe72_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wpe72_flash_data = {
+ .part_probes = wpe72_part_probes,
+};
+
+static void __init wpe72_setup(void)
+{
+ ath79_register_m25p80(&wpe72_flash_data);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
+ wpe72_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpe72_gpio_keys),
+ wpe72_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,77 @@
+@@ -16,17 +16,78 @@
enum ath79_mach_type {
ATH79_MACH_GENERIC = 0,
+ ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
+ ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
+ ATH79_MACH_WP543, /* Compex WP543 */
++ ATH79_MACH_WPE72, /* Compex WPE72 */
+ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
+ ATH79_MACH_WRT400N, /* Linksys WRT400N */
+ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
config ATH79_MACH_PB44
bool "Atheros PB44 reference board"
select SOC_AR71XX
-@@ -54,6 +127,349 @@ config ATH79_MACH_PB44
+@@ -54,6 +127,359 @@ config ATH79_MACH_PB44
Say 'Y' here if you want your kernel to support the
Atheros PB44 reference board.
+ select ATH79_DEV_USB
+ select MYLOADER
+
++config ATH79_MACH_WPE72
++ bool "Compex WPE72/WPE72NX board support"
++ select SOC_AR724X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select MYLOADER
++
+config ATH79_MACH_DIR_600_A1
+ bool "D-Link DIR-600 rev. A1 support"
+ select SOC_AR724X
endif
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,53 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
+@@ -36,8 +36,54 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += p
#
# Machines
#
+obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
+obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
+obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
++obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
+obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
+obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
+obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
projects / openwrt / staging / xback.git / commitdiff