ramips: add support for Tama W06

Tama Electric Axing W06 is a 2.4 GHz band 11n router, based on Mediatek
MT7688AN.

Specification:

- MT7688AN (575 MHz)
- 64 MB of RAM (DDR2 SDRAM)
- 16 MB of Flash (SPI)
- 1T1R 2.4 GHz
- 1x 10/100/1000 Mbps Ethernet
- 4x LEDs (GPIO connected: 3), 1x button
- 1x USB 2.0 Type-A (host)
- UART header on PCB (GND, RX, TX, Vcc from RJ45 side)

Flash instruction using sysupgrade image:
1. Connect micro-USB cable for power supply into W06 and turn on the
router
2. Connect to wifi with SSID "tama-*" with password. Complete SSID and
password are listed on the back of the router
3. Access to 192.168.1.1 and login with user name "admin" and password
empty
4. In firmware update（ファームウェア更新） page, click "参照" button
and click "ブラウザー" button to open file browser, select the
sysupgrade image and press OK button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 16d38dd5fe4e4c78f769c54e0b51b1459660a1ab..515656f6476f0b2f27578f632235333809fc61e9 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -362,6 +362,10 @@ rt-n14u)
        set_wifi_led "$boardname:blue:air"
        set_usb_led "$boardname:blue:usb"
        ;;
+tama,w06)
+       ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+       ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
+       ;;
 tew-714tru)
        set_usb_led "$boardname:red:usb"
        set_wifi_led "$boardname:green:wifi"

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 946810b3e26030f092902a42ee21ee94685f5cee..fe19a226f89353bd930a3ef651b9a73e6693efc9 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -248,6 +248,7 @@ ramips_setup_interfaces()
        mzk-ex750np|\
        na930|\
        pbr-d1|\
+       tama,w06|\
        u25awf-h1|\
        wli-tx4-ag300n|\
        wmdr-143n|\

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 23d31e9463ba6dfde204ab729924039cd0e0aafd..a0610b257fe6e8f8c5c29f1c27939c41bc04ad79 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -141,6 +141,7 @@ platform_check_image() {
        sap-g3200u3|\
        sk-wb8|\
        sl-r7205|\
+       tama,w06|\
        tew-638apb-v2|\
        tew-691gr|\
        tew-692gr|\

diff --git a/target/linux/ramips/dts/W06.dts b/target/linux/ramips/dts/W06.dts
new file mode 100644 (file)
index 0000000..c29a01f
--- /dev/null
+++ b/target/linux/ramips/dts/W06.dts
@@ -0,0 +1,115 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "tama,w06", "mediatek,mt7628an-soc";
+       model = "Tama W06";
+
+       memory@0{
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wps {
+                       label = "w06:green:wps";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "w06:green:wan";
+                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+               };
+
+               wireless {
+                       label = "w06:green:wlan";
+                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&ohci {
+       status = "okay";
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "uart1", "p0led_an", "wdt";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xeb0000>;
+               };
+
+               partition@f00000 {
+                       label = "user-data";
+                       reg = <0xf00000 0x100000>;
+                       read-only;
+               };
+       };
+};
+
+&wmac {
+       status = "okay";
+};

diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index fe5280957094d03a70fa634dfac95949de9da1c5..415075b22d114eb55a7b3d5476e49d2e966cf32d 100644 (file)
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -19,6 +19,14 @@ endef
 DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION
 
 
+define Device/tama_w06
+  DTS := W06
+  IMAGE_SIZE := 15040k
+  DEVICE_TITLE := Tama W06
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += tama_w06
+
 define Device/duzun-dm06
   DTS := DUZUN-DM06
   DEVICE_TITLE := DuZun DM06