add initial diagnostic support

SVN-Revision: 9048

diff --git a/target/linux/adm5120/base-files/default/etc/diag.sh b/target/linux/adm5120/base-files/default/etc/diag.sh
new file mode 100755 (executable)
index 0000000..3d5d9d8
--- /dev/null
+++ b/target/linux/adm5120/base-files/default/etc/diag.sh
@@ -0,0 +1,48 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# $Id$
+#
+
+. /lib/adm5120.sh
+
+led_set_attr() {
+       [ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+status_led_set_timer() {
+       led_set_attr $status_led "trigger" "timer"
+       led_set_attr $status_led "delay_on" "$1"
+       led_set_attr $status_led "delay_off" "$2"
+}
+
+status_led_set_morse() {
+       led_set_attr $status_led "trigger" "morse"
+       led_set_attr $status_led "delay" "$1"
+       led_set_attr $status_led "message" "$2"
+}
+
+status_led_on() {
+       led_set_attr $status_led "trigger" "none"
+       led_set_attr $status_led "brightness" 255
+}
+
+status_led_off() {
+       led_set_attr $status_led "trigger" "none"
+       led_set_attr $status_led "brightness" 0
+}
+
+set_state() {
+       case "$1" in
+       preinit)
+               status_led_set_timer 200 200
+               ;;
+       failsafe)
+               status_led_set_timer 50 50
+               ;;
+       done)
+               status_led_on
+               ;;
+       esac
+}

diff --git a/target/linux/adm5120/base-files/default/lib/adm5120.sh b/target/linux/adm5120/base-files/default/lib/adm5120.sh
new file mode 100755 (executable)
index 0000000..d599a09
--- /dev/null
+++ b/target/linux/adm5120/base-files/default/lib/adm5120.sh
@@ -0,0 +1,50 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# $Id$
+#
+
+board_name=""
+status_led=""
+sys_mtd_part=""
+
+adm5120_detect() {
+       board_name=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /system type/ {print $2}' /proc/cpuinfo)
+
+       case "$board_name" in
+       "Cellvision"*)
+               status_led="status"
+               sys_mtd_part="firmware"
+               ;;
+       "Compex"*)
+               status_led="diag"
+               case "$board_name" in
+               *-WRT)
+                       sys_mtd_part="trx"
+                       ;;
+               *)
+                       sys_mtd_part="partition1"
+                       ;;
+               esac
+               ;;
+       "Edimax"*)
+               status_led="power"
+               sys_mtd_part="firmware"
+               ;;
+       "Infineon"*)
+               sys_mtd_part="firmware"
+               ;;
+       "Mikrotik"*)
+               status_led="power"
+               ;;
+       "ZyXEL"*)
+               status_led="power"
+               sys_mtd_part="trx"
+               ;;
+       *)
+               ;;
+       esac
+}
+
+adm5120_detect