--- /dev/null
+Subject: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs
+Date: Tue, 14 Aug 2018 17:42:33 +0530
+Message-Id: <1534248753-2440-15-git-send-email-sricharan@codeaurora.org>
+X-Mailer: git-send-email 1.9.1
+In-Reply-To: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org>
+References: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org>
+Sender: linux-kernel-owner@vger.kernel.org
+Precedence: bulk
+List-ID: <linux-kernel.vger.kernel.org>
+X-Mailing-List: linux-kernel@vger.kernel.org
+
+In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
+that has KRAIT processors the voltage/current value of each OPP
+varies based on the silicon variant in use.
+
+The required OPP related data is determined based on
+the efuse value. This is similar to the existing code for
+kryo cores. So adding support for krait cores here.
+
+Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+---
+ .../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
+ drivers/cpufreq/Kconfig.arm | 2 +-
+ drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
+ drivers/cpufreq/qcom-cpufreq-nvmem.c | 151 +++++++++++++++++++--
+ 4 files changed, 149 insertions(+), 12 deletions(-)
+
+# diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+# index 6dcdfcd..7bc0f1a 100644
+# --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+# +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
+# @@ -19,7 +19,8 @@ In 'cpus' nodes:
+
+# In 'operating-points-v2' table:
+# - compatible: Should be
+# - - 'operating-points-v2-qcom-cpu' for apq8096 and msm8996.
+# + - 'operating-points-v2-qcom-cpu' for apq8096, msm8996, msm8974,
+# + apq8064, msm8960 and ipq8074.
+# - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
+# efuse registers that has information about the
+# speedbin that is used to select the right frequency/voltage
+diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
+index 13fbd97..497ae89 100644
+--- a/drivers/cpufreq/Kconfig.arm
++++ b/drivers/cpufreq/Kconfig.arm
+@@ -126,7 +126,7 @@ config ARM_OMAP2PLUS_CPUFREQ
+
+ config ARM_QCOM_CPUFREQ_NVMEM
+ tristate "Qualcomm nvmem based CPUFreq"
+- depends on ARM64
++ depends on ARCH_QCOM
+ depends on QCOM_QFPROM
+ depends on QCOM_SMEM
+ select PM_OPP
+diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
+index fe14c57..917cdc2 100644
+--- a/drivers/cpufreq/cpufreq-dt-platdev.c
++++ b/drivers/cpufreq/cpufreq-dt-platdev.c
+@@ -128,6 +128,11 @@
+ { .compatible = "ti,am43", },
+ { .compatible = "ti,dra7", },
+
++ { .compatible = "qcom,ipq8064", },
++ { .compatible = "qcom,apq8064", },
++ { .compatible = "qcom,msm8974", },
++ { .compatible = "qcom,msm8960", },
++
+ { }
+ };
+
+diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
+index 0ad8e5b..5f2add0 100644
+--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
++++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
+@@ -48,17 +48,92 @@
+ struct qcom_cpufreq_match_data {
+ int (*get_version)(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
++ char **pvs_name,
+ struct qcom_cpufreq_drv *drv);
+ };
+
+ struct qcom_cpufreq_drv {
+- struct opp_table **opp_tables;
++ struct opp_table **opp_tables1;
++ struct opp_table **opp_tables2;
+ u32 versions;
+ const struct qcom_cpufreq_match_data *data;
+ };
+
+ static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+
++static void get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver,
++ struct nvmem_cell *pvs_nvmem, u8 *buf)
++{
++ u32 pte_efuse;
++
++ pte_efuse = *((u32 *)buf);
++
++ *speed = pte_efuse & 0xf;
++ if (*speed == 0xf)
++ *speed = (pte_efuse >> 4) & 0xf;
++
++ if (*speed == 0xf) {
++ *speed = 0;
++ pr_warn("Speed bin: Defaulting to %d\n", *speed);
++ } else {
++ pr_info("Speed bin: %d\n", *speed);
++ }
++
++ *pvs = (pte_efuse >> 10) & 0x7;
++ if (*pvs == 0x7)
++ *pvs = (pte_efuse >> 13) & 0x7;
++
++ if (*pvs == 0x7) {
++ *pvs = 0;
++ pr_warn("PVS bin: Defaulting to %d\n", *pvs);
++ } else {
++ pr_info("PVS bin: %d\n", *pvs);
++ }
++}
++
++static void get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver,
++ struct nvmem_cell *pvs_nvmem, u8 *buf)
++{
++ u32 pte_efuse, redundant_sel;
++
++ pte_efuse = *((u32 *)buf);
++ redundant_sel = (pte_efuse >> 24) & 0x7;
++ *speed = pte_efuse & 0x7;
++
++ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
++ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
++ *pvs_ver = (pte_efuse >> 4) & 0x3;
++
++ switch (redundant_sel) {
++ case 1:
++ *speed = (pte_efuse >> 27) & 0xf;
++ break;
++ case 2:
++ *pvs = (pte_efuse >> 27) & 0xf;
++ break;
++ }
++
++ /* Check SPEED_BIN_BLOW_STATUS */
++ if (pte_efuse & BIT(3)) {
++ pr_info("Speed bin: %d\n", *speed);
++ } else {
++ pr_warn("Speed bin not set. Defaulting to 0!\n");
++ *speed = 0;
++ }
++
++ /* Check PVS_BLOW_STATUS */
++ pte_efuse = *(((u32 *)buf) + 4);
++ pte_efuse &= BIT(21);
++ if (pte_efuse) {
++ pr_info("PVS bin: %d\n", *pvs);
++ } else {
++ pr_warn("PVS bin not set. Defaulting to 0!\n");
++ *pvs = 0;
++ }
++
++ pr_info("PVS version: %d\n", *pvs_ver);
++}
++
+ static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
+ {
+ size_t len;
+@@ -90,11 +165,13 @@
+
+ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
++ char **pvs_name,
+ struct qcom_cpufreq_drv *drv)
+ {
+ size_t len;
+ u8 *speedbin;
+ enum _msm8996_version msm8996_version;
++ *pvs_name = NULL;
+
+ msm8996_version = qcom_cpufreq_get_msm_id();
+ if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
+@@ -122,16 +199,51 @@
+ return 0;
+ }
+
++static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
++ struct nvmem_cell *speedbin_nvmem,
++ char **pvs_name,
++ struct qcom_cpufreq_drv *drv)
++{
++ int speed = 0, pvs = 0, pvs_ver = 0;
++ u8 *speedbin;
++ size_t len;
++
++ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
++ if (len == 4) {
++ get_krait_bin_format_a(&speed, &pvs, &pvs_ver,
++ speedbin_nvmem, speedbin);
++ } else if (len == 8) {
++ get_krait_bin_format_b(&speed, &pvs, &pvs_ver,
++ speedbin_nvmem, speedbin);
++ } else {
++ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
++ return -ENODEV;
++ }
++
++ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
++ speed, pvs, pvs_ver);
++
++ drv->versions = (1 << speed);
++
++ kfree(speedbin);
++ return 0;
++}
++
+ static const struct qcom_cpufreq_match_data match_data_kryo = {
+ .get_version = qcom_cpufreq_kryo_name_version,
+ };
+
++static const struct qcom_cpufreq_match_data match_data_krait = {
++ .get_version = qcom_cpufreq_krait_name_version,
++};
++
+ static int qcom_cpufreq_probe(struct platform_device *pdev)
+ {
+ struct qcom_cpufreq_drv *drv;
+ struct nvmem_cell *speedbin_nvmem;
+ struct device_node *np;
+ struct device *cpu_dev;
++ char *pvs_name = "speedXX-pvsXX-vXX";
+ unsigned cpu;
+ const struct of_device_id *match;
+ int ret;
+@@ -144,7 +256,7 @@
+ if (!np)
+ return -ENOENT;
+
+- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
++ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
+ if (!ret) {
+ of_node_put(np);
+ return -ENOENT;
+@@ -172,7 +284,7 @@
+ goto free_drv;
+ }
+
+- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
++ ret = drv->data->get_version(cpu_dev, speedbin_nvmem, &pvs_name, drv);
+ if (ret) {
+ nvmem_cell_put(speedbin_nvmem);
+ goto free_drv;
+@@ -181,12 +293,18 @@
+ }
+ of_node_put(np);
+
+- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
++ drv->opp_tables1 = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables1),
+ GFP_KERNEL);
+- if (!drv->opp_tables) {
++ if (!drv->opp_tables1) {
+ ret = -ENOMEM;
+ goto free_drv;
+ }
++ drv->opp_tables2 = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables2),
++ GFP_KERNEL);
++ if (!drv->opp_tables2) {
++ ret = -ENOMEM;
++ goto free_opp1;
++ }
+
+ for_each_possible_cpu(cpu) {
+ cpu_dev = get_cpu_device(cpu);
+@@ -196,11 +314,22 @@
+ }
+
+ if (drv->data->get_version) {
+- drv->opp_tables[cpu] =
+- dev_pm_opp_set_supported_hw(cpu_dev,
++
++ if (pvs_name) {
++ drv->opp_tables1[cpu] = dev_pm_opp_set_prop_name(cpu_dev,
++ pvs_name);
++ if (IS_ERR(drv->opp_tables1[cpu])) {
++ ret = PTR_ERR(drv->opp_tables1[cpu]);
++ dev_err(cpu_dev, "Failed to add OPP name %s\n",
++ pvs_name);
++ goto free_opp;
++ }
++ }
++
++ drv->opp_tables2[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
+ &drv->versions, 1);
+- if (IS_ERR(drv->opp_tables[cpu])) {
+- ret = PTR_ERR(drv->opp_tables[cpu]);
++ if (IS_ERR(drv->opp_tables2[cpu])) {
++ ret = PTR_ERR(drv->opp_tables2[cpu]);
+ dev_err(cpu_dev,
+ "Failed to set supported hardware\n");
+ goto free_opp;
+@@ -220,11 +349,18 @@
+
+ free_opp:
+ for_each_possible_cpu(cpu) {
+- if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
++ if (IS_ERR_OR_NULL(drv->opp_tables1[cpu]))
+ break;
+- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
++ dev_pm_opp_put_prop_name(drv->opp_tables1[cpu]);
+ }
+- kfree(drv->opp_tables);
++ for_each_possible_cpu(cpu) {
++ if (IS_ERR_OR_NULL(drv->opp_tables2[cpu]))
++ break;
++ dev_pm_opp_put_supported_hw(drv->opp_tables2[cpu]);
++ }
++ kfree(drv->opp_tables2);
++free_opp1:
++ kfree(drv->opp_tables1);
+ free_drv:
+ kfree(drv);
+
+@@ -239,10 +375,14 @@
+ platform_device_unregister(cpufreq_dt_pdev);
+
+ for_each_possible_cpu(cpu)
+- if (drv->opp_tables[cpu])
+- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
++ if (drv->opp_tables1[cpu])
++ dev_pm_opp_put_prop_name(drv->opp_tables1[cpu]);
++ for_each_possible_cpu(cpu)
++ if (drv->opp_tables2[cpu])
++ dev_pm_opp_put_supported_hw(drv->opp_tables2[cpu]);
+
+- kfree(drv->opp_tables);
++ kfree(drv->opp_tables1);
++ kfree(drv->opp_tables2);
+ kfree(drv);
+
+ return 0;
+@@ -259,6 +399,10 @@
+ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
+ { .compatible = "qcom,apq8096", .data = &match_data_kryo },
+ { .compatible = "qcom,msm8996", .data = &match_data_kryo },
++ { .compatible = "qcom,ipq8064", .data = &match_data_krait },
++ { .compatible = "qcom,apq8064", .data = &match_data_krait },
++ { .compatible = "qcom,msm8974", .data = &match_data_krait },
++ { .compatible = "qcom,msm8960", .data = &match_data_krait },
+ {},
+ };
+
projects / openwrt / staging / nbd.git / commitdiff