hlt
jmp 1b
-#include "../../kernel/verify_cpu.S"
+#include "../../kernel/verify_cpu_64.S"
/* Be careful here startup_64 needs to be at a predictable
* address so I can export it in an ELF header. Bootloaders
movb $0xbc,%al ; outb %al,$0x80
jmp no_longmode
-#include "../verify_cpu.S"
+#include "../verify_cpu_64.S"
/* This code uses an extended set of video mode numbers. These include:
* Aliases for standard modes
no_longmode:
hlt
jmp no_longmode
-#include "verify_cpu.S"
+#include "verify_cpu_64.S"
# Careful these need to be in the same 64K segment as the above;
tidt:
+++ /dev/null
-/*
- *
- * verify_cpu.S - Code for cpu long mode and SSE verification. This
- * code has been borrowed from boot/setup.S and was introduced by
- * Andi Kleen.
- *
- * Copyright (c) 2007 Andi Kleen (ak@suse.de)
- * Copyright (c) 2007 Eric Biederman (ebiederm@xmission.com)
- * Copyright (c) 2007 Vivek Goyal (vgoyal@in.ibm.com)
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2. See the file COPYING for more details.
- *
- * This is a common code for verification whether CPU supports
- * long mode and SSE or not. It is not called directly instead this
- * file is included at various places and compiled in that context.
- * Following are the current usage.
- *
- * This file is included by both 16bit and 32bit code.
- *
- * arch/x86_64/boot/setup.S : Boot cpu verification (16bit)
- * arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit)
- * arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit)
- * arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit)
- *
- * verify_cpu, returns the status of cpu check in register %eax.
- * 0: Success 1: Failure
- *
- * The caller needs to check for the error code and take the action
- * appropriately. Either display a message or halt.
- */
-
-#include <asm/cpufeature.h>
-
-verify_cpu:
- pushfl # Save caller passed flags
- pushl $0 # Kill any dangerous flags
- popfl
-
- pushfl # standard way to check for cpuid
- popl %eax
- movl %eax,%ebx
- xorl $0x200000,%eax
- pushl %eax
- popfl
- pushfl
- popl %eax
- cmpl %eax,%ebx
- jz verify_cpu_no_longmode # cpu has no cpuid
-
- movl $0x0,%eax # See if cpuid 1 is implemented
- cpuid
- cmpl $0x1,%eax
- jb verify_cpu_no_longmode # no cpuid 1
-
- xor %di,%di
- cmpl $0x68747541,%ebx # AuthenticAMD
- jnz verify_cpu_noamd
- cmpl $0x69746e65,%edx
- jnz verify_cpu_noamd
- cmpl $0x444d4163,%ecx
- jnz verify_cpu_noamd
- mov $1,%di # cpu is from AMD
-
-verify_cpu_noamd:
- movl $0x1,%eax # Does the cpu have what it takes
- cpuid
- andl $REQUIRED_MASK0,%edx
- xorl $REQUIRED_MASK0,%edx
- jnz verify_cpu_no_longmode
-
- movl $0x80000000,%eax # See if extended cpuid is implemented
- cpuid
- cmpl $0x80000001,%eax
- jb verify_cpu_no_longmode # no extended cpuid
-
- movl $0x80000001,%eax # Does the cpu have what it takes
- cpuid
- andl $REQUIRED_MASK1,%edx
- xorl $REQUIRED_MASK1,%edx
- jnz verify_cpu_no_longmode
-
-verify_cpu_sse_test:
- movl $1,%eax
- cpuid
- andl $SSE_MASK,%edx
- cmpl $SSE_MASK,%edx
- je verify_cpu_sse_ok
- test %di,%di
- jz verify_cpu_no_longmode # only try to force SSE on AMD
- movl $0xc0010015,%ecx # HWCR
- rdmsr
- btr $15,%eax # enable SSE
- wrmsr
- xor %di,%di # don't loop
- jmp verify_cpu_sse_test # try again
-
-verify_cpu_no_longmode:
- popfl # Restore caller passed flags
- movl $1,%eax
- ret
-verify_cpu_sse_ok:
- popfl # Restore caller passed flags
- xorl %eax, %eax
- ret
--- /dev/null
+/*
+ *
+ * verify_cpu.S - Code for cpu long mode and SSE verification. This
+ * code has been borrowed from boot/setup.S and was introduced by
+ * Andi Kleen.
+ *
+ * Copyright (c) 2007 Andi Kleen (ak@suse.de)
+ * Copyright (c) 2007 Eric Biederman (ebiederm@xmission.com)
+ * Copyright (c) 2007 Vivek Goyal (vgoyal@in.ibm.com)
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ *
+ * This is a common code for verification whether CPU supports
+ * long mode and SSE or not. It is not called directly instead this
+ * file is included at various places and compiled in that context.
+ * Following are the current usage.
+ *
+ * This file is included by both 16bit and 32bit code.
+ *
+ * arch/x86_64/boot/setup.S : Boot cpu verification (16bit)
+ * arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit)
+ * arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit)
+ * arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit)
+ *
+ * verify_cpu, returns the status of cpu check in register %eax.
+ * 0: Success 1: Failure
+ *
+ * The caller needs to check for the error code and take the action
+ * appropriately. Either display a message or halt.
+ */
+
+#include <asm/cpufeature.h>
+
+verify_cpu:
+ pushfl # Save caller passed flags
+ pushl $0 # Kill any dangerous flags
+ popfl
+
+ pushfl # standard way to check for cpuid
+ popl %eax
+ movl %eax,%ebx
+ xorl $0x200000,%eax
+ pushl %eax
+ popfl
+ pushfl
+ popl %eax
+ cmpl %eax,%ebx
+ jz verify_cpu_no_longmode # cpu has no cpuid
+
+ movl $0x0,%eax # See if cpuid 1 is implemented
+ cpuid
+ cmpl $0x1,%eax
+ jb verify_cpu_no_longmode # no cpuid 1
+
+ xor %di,%di
+ cmpl $0x68747541,%ebx # AuthenticAMD
+ jnz verify_cpu_noamd
+ cmpl $0x69746e65,%edx
+ jnz verify_cpu_noamd
+ cmpl $0x444d4163,%ecx
+ jnz verify_cpu_noamd
+ mov $1,%di # cpu is from AMD
+
+verify_cpu_noamd:
+ movl $0x1,%eax # Does the cpu have what it takes
+ cpuid
+ andl $REQUIRED_MASK0,%edx
+ xorl $REQUIRED_MASK0,%edx
+ jnz verify_cpu_no_longmode
+
+ movl $0x80000000,%eax # See if extended cpuid is implemented
+ cpuid
+ cmpl $0x80000001,%eax
+ jb verify_cpu_no_longmode # no extended cpuid
+
+ movl $0x80000001,%eax # Does the cpu have what it takes
+ cpuid
+ andl $REQUIRED_MASK1,%edx
+ xorl $REQUIRED_MASK1,%edx
+ jnz verify_cpu_no_longmode
+
+verify_cpu_sse_test:
+ movl $1,%eax
+ cpuid
+ andl $SSE_MASK,%edx
+ cmpl $SSE_MASK,%edx
+ je verify_cpu_sse_ok
+ test %di,%di
+ jz verify_cpu_no_longmode # only try to force SSE on AMD
+ movl $0xc0010015,%ecx # HWCR
+ rdmsr
+ btr $15,%eax # enable SSE
+ wrmsr
+ xor %di,%di # don't loop
+ jmp verify_cpu_sse_test # try again
+
+verify_cpu_no_longmode:
+ popfl # Restore caller passed flags
+ movl $1,%eax
+ ret
+verify_cpu_sse_ok:
+ popfl # Restore caller passed flags
+ xorl %eax, %eax
+ ret
projects / openwrt / staging / blogic.git / commitdiff