struct tsl2583_chip {
struct mutex als_mutex;
struct i2c_client *client;
- struct iio_dev *iio_dev;
struct taos_als_info als_cur_info;
struct taos_settings taos_settings;
int als_time_scale;
static int
taos_i2c_read(struct i2c_client *client, u8 reg, u8 *val, unsigned int len)
{
- int ret;
- int i;
+ int i, ret;
for (i = 0; i < len; i++) {
/* select register to write */
* the array are then used along with the time scale factor array values, to
* calculate the lux.
*/
-static int taos_get_lux(struct i2c_client *client)
+static int taos_get_lux(struct iio_dev *indio_dev)
{
u16 ch0, ch1; /* separated ch0/ch1 data from device */
u32 lux; /* raw lux calculated from device data */
u32 ratio;
u8 buf[5];
struct taos_lux *p;
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
int i, ret;
u32 ch0lux = 0;
u32 ch1lux = 0;
if (mutex_trylock(&chip->als_mutex) == 0) {
- dev_info(&client->dev, "taos_get_lux device is busy\n");
+ dev_info(&chip->client->dev, "taos_get_lux device is busy\n");
return chip->als_cur_info.lux; /* busy, so return LAST VALUE */
}
if (chip->taos_chip_status != TSL258X_CHIP_WORKING) {
/* device is not enabled */
- dev_err(&client->dev, "taos_get_lux device is not enabled\n");
+ dev_err(&chip->client->dev, "taos_get_lux device is not enabled\n");
ret = -EBUSY ;
goto out_unlock;
}
- ret = taos_i2c_read(client, (TSL258X_CMD_REG), &buf[0], 1);
+ ret = taos_i2c_read(chip->client, (TSL258X_CMD_REG), &buf[0], 1);
if (ret < 0) {
- dev_err(&client->dev, "taos_get_lux failed to read CMD_REG\n");
+ dev_err(&chip->client->dev, "taos_get_lux failed to read CMD_REG\n");
goto out_unlock;
}
/* is data new & valid */
if (!(buf[0] & TSL258X_STA_ADC_INTR)) {
- dev_err(&client->dev, "taos_get_lux data not valid\n");
+ dev_err(&chip->client->dev, "taos_get_lux data not valid\n");
ret = chip->als_cur_info.lux; /* return LAST VALUE */
goto out_unlock;
}
for (i = 0; i < 4; i++) {
int reg = TSL258X_CMD_REG | (TSL258X_ALS_CHAN0LO + i);
- ret = taos_i2c_read(client, reg, &buf[i], 1);
+ ret = taos_i2c_read(chip->client, reg, &buf[i], 1);
if (ret < 0) {
- dev_err(&client->dev, "taos_get_lux failed to read"
+ dev_err(&chip->client->dev, "taos_get_lux failed to read"
" register %x\n", reg);
goto out_unlock;
}
/* clear status, really interrupt status (interrupts are off), but
* we use the bit anyway - don't forget 0x80 - this is a command*/
- ret = i2c_smbus_write_byte(client,
- (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN | TSL258X_CMD_ALS_INT_CLR));
+ ret = i2c_smbus_write_byte(chip->client,
+ (TSL258X_CMD_REG | TSL258X_CMD_SPL_FN |
+ TSL258X_CMD_ALS_INT_CLR));
if (ret < 0) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_i2c_write_command failed in taos_get_lux, err = %d\n",
ret);
goto out_unlock; /* have no data, so return failure */
/* note: lux is 31 bit max at this point */
if (ch1lux > ch0lux) {
- dev_dbg(&client->dev, "No Data - Return last value\n");
+ dev_dbg(&chip->client->dev, "No Data - Return last value\n");
ret = chip->als_cur_info.lux = 0;
goto out_unlock;
}
* to derive actual lux).
* Return updated gain_trim value.
*/
-int taos_als_calibrate(struct i2c_client *client)
+static int taos_als_calibrate(struct iio_dev *indio_dev)
{
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
u8 reg_val;
unsigned int gain_trim_val;
int ret;
int lux_val;
- ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | TSL258X_CNTRL));
+ ret = i2c_smbus_write_byte(chip->client,
+ (TSL258X_CMD_REG | TSL258X_CNTRL));
if (ret < 0) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_als_calibrate failed to reach the CNTRL register, ret=%d\n",
ret);
return ret;
}
- reg_val = i2c_smbus_read_byte(client);
+ reg_val = i2c_smbus_read_byte(chip->client);
if ((reg_val & (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON))
!= (TSL258X_CNTL_ADC_ENBL | TSL258X_CNTL_PWR_ON)) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_als_calibrate failed: device not powered on with ADC enabled\n");
return -1;
}
- ret = i2c_smbus_write_byte(client, (TSL258X_CMD_REG | TSL258X_CNTRL));
+ ret = i2c_smbus_write_byte(chip->client,
+ (TSL258X_CMD_REG | TSL258X_CNTRL));
if (ret < 0) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_als_calibrate failed to reach the STATUS register, ret=%d\n",
ret);
return ret;
}
- reg_val = i2c_smbus_read_byte(client);
+ reg_val = i2c_smbus_read_byte(chip->client);
if ((reg_val & TSL258X_STA_ADC_VALID) != TSL258X_STA_ADC_VALID) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_als_calibrate failed: STATUS - ADC not valid.\n");
return -ENODATA;
}
- lux_val = taos_get_lux(client);
+ lux_val = taos_get_lux(indio_dev);
if (lux_val < 0) {
- dev_err(&client->dev, "taos_als_calibrate failed to get lux\n");
+ dev_err(&chip->client->dev, "taos_als_calibrate failed to get lux\n");
return lux_val;
}
gain_trim_val = (unsigned int) (((chip->taos_settings.als_cal_target)
* chip->taos_settings.als_gain_trim) / lux_val);
if ((gain_trim_val < 250) || (gain_trim_val > 4000)) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_als_calibrate failed: trim_val of %d is out of range\n",
gain_trim_val);
return -ENODATA;
* Turn the device on.
* Configuration must be set before calling this function.
*/
-static int taos_chip_on(struct i2c_client *client)
+static int taos_chip_on(struct iio_dev *indio_dev)
{
int i;
- int ret = 0;
+ int ret;
u8 *uP;
u8 utmp;
int als_count;
int als_time;
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
/* and make sure we're not already on */
if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
/* if forcing a register update - turn off, then on */
- dev_info(&client->dev, "device is already enabled\n");
- return -EINVAL;
+ dev_info(&chip->client->dev, "device is already enabled\n");
+ return -EINVAL;
}
/* determine als integration regster */
/* TSL258x Specific power-on / adc enable sequence
* Power on the device 1st. */
utmp = TSL258X_CNTL_PWR_ON;
- ret = i2c_smbus_write_byte_data(client,
- TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL258X_CMD_REG | TSL258X_CNTRL, utmp);
if (ret < 0) {
- dev_err(&client->dev, "taos_chip_on failed on CNTRL reg.\n");
+ dev_err(&chip->client->dev, "taos_chip_on failed on CNTRL reg.\n");
return -1;
}
/* Use the following shadow copy for our delay before enabling ADC.
* Write all the registers. */
for (i = 0, uP = chip->taos_config; i < TSL258X_REG_MAX; i++) {
- ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG + i,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL258X_CMD_REG + i,
*uP++);
if (ret < 0) {
- dev_err(&client->dev,
+ dev_err(&chip->client->dev,
"taos_chip_on failed on reg %d.\n", i);
return -1;
}
/* NOW enable the ADC
* initialize the desired mode of operation */
utmp = TSL258X_CNTL_PWR_ON | TSL258X_CNTL_ADC_ENBL;
- ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG | TSL258X_CNTRL,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL258X_CMD_REG | TSL258X_CNTRL,
utmp);
if (ret < 0) {
- dev_err(&client->dev, "taos_chip_on failed on 2nd CTRL reg.\n");
+ dev_err(&chip->client->dev, "taos_chip_on failed on 2nd CTRL reg.\n");
return -1;
}
chip->taos_chip_status = TSL258X_CHIP_WORKING;
return ret;
}
-static int taos_chip_off(struct i2c_client *client)
+static int taos_chip_off(struct iio_dev *indio_dev)
{
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
int ret;
/* turn device off */
chip->taos_chip_status = TSL258X_CHIP_SUSPENDED;
- ret = i2c_smbus_write_byte_data(client, TSL258X_CMD_REG | TSL258X_CNTRL,
+ ret = i2c_smbus_write_byte_data(chip->client,
+ TSL258X_CMD_REG | TSL258X_CNTRL,
0x00);
return ret;
}
/* Sysfs Interface Functions */
-static ssize_t taos_device_id(struct device *dev,
-struct device_attribute *attr, char *buf)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
-
- return sprintf(buf, "%s\n", chip->client->name);
-}
static ssize_t taos_power_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
return sprintf(buf, "%d\n", chip->taos_chip_status);
}
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
unsigned long value;
if (strict_strtoul(buf, 0, &value))
return -EINVAL;
if (value == 0)
- taos_chip_off(chip->client);
+ taos_chip_off(indio_dev);
else
- taos_chip_on(chip->client);
+ taos_chip_on(indio_dev);
return len;
}
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
char gain[4] = {0};
switch (chip->taos_settings.als_gain) {
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
unsigned long value;
if (strict_strtoul(buf, 0, &value))
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
return sprintf(buf, "%d\n", chip->taos_settings.als_time);
}
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
unsigned long value;
if (strict_strtoul(buf, 0, &value))
if (value % 50)
return -EINVAL;
- chip->taos_settings.als_time = value;
+ chip->taos_settings.als_time = value;
return len;
}
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
return sprintf(buf, "%d\n", chip->taos_settings.als_gain_trim);
}
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
unsigned long value;
if (strict_strtoul(buf, 0, &value))
struct device_attribute *attr, char *buf)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
return sprintf(buf, "%d\n", chip->taos_settings.als_cal_target);
}
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
unsigned long value;
if (strict_strtoul(buf, 0, &value))
static ssize_t taos_lux_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
- int lux;
+ int ret;
- lux = taos_get_lux(chip->client);
+ ret = taos_get_lux(dev_get_drvdata(dev));
+ if (ret < 0)
+ return ret;
- return sprintf(buf, "%d\n", lux);
+ return sprintf(buf, "%d\n", ret);
}
static ssize_t taos_do_calibrate(struct device *dev,
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
unsigned long value;
if (strict_strtoul(buf, 0, &value))
return -EINVAL;
if (value == 1)
- taos_als_calibrate(chip->client);
+ taos_als_calibrate(indio_dev);
return len;
}
struct device_attribute *attr, const char *buf, size_t len)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- struct tsl2583_chip *chip = indio_dev->dev_data;
- int value[ARRAY_SIZE(taos_device_lux)];
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
+ int value[ARRAY_SIZE(taos_device_lux)*3 + 1];
int n;
get_options(buf, ARRAY_SIZE(value), value);
}
if (chip->taos_chip_status == TSL258X_CHIP_WORKING)
- taos_chip_off(chip->client);
+ taos_chip_off(indio_dev);
/* Zero out the table */
memset(taos_device_lux, 0, sizeof(taos_device_lux));
memcpy(taos_device_lux, &value[1], (value[0] * 4));
- taos_chip_on(chip->client);
+ taos_chip_on(indio_dev);
return len;
}
-static DEVICE_ATTR(name, S_IRUGO, taos_device_id, NULL);
static DEVICE_ATTR(power_state, S_IRUGO | S_IWUSR,
taos_power_state_show, taos_power_state_store);
taos_luxtable_show, taos_luxtable_store);
static struct attribute *sysfs_attrs_ctrl[] = {
- &dev_attr_name.attr,
&dev_attr_power_state.attr,
&dev_attr_illuminance0_calibscale.attr, /* Gain */
&dev_attr_illuminance0_calibscale_available.attr,
static int __devinit taos_probe(struct i2c_client *clientp,
const struct i2c_device_id *idp)
{
- int i, ret = 0;
+ int i, ret;
unsigned char buf[TSL258X_MAX_DEVICE_REGS];
- static struct tsl2583_chip *chip;
+ struct tsl2583_chip *chip;
+ struct iio_dev *indio_dev;
if (!i2c_check_functionality(clientp->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
return -EOPNOTSUPP;
}
- chip = kzalloc(sizeof(struct tsl2583_chip), GFP_KERNEL);
- if (!chip)
- return -ENOMEM;
-
+ indio_dev = iio_allocate_device(sizeof(*chip));
+ if (indio_dev == NULL) {
+ ret = -ENOMEM;
+ dev_err(&clientp->dev, "iio allocation failed\n");
+ goto fail1;
+ }
+ chip = iio_priv(indio_dev);
chip->client = clientp;
- i2c_set_clientdata(clientp, chip);
+ i2c_set_clientdata(clientp, indio_dev);
mutex_init(&chip->als_mutex);
chip->taos_chip_status = TSL258X_CHIP_UNKNOWN;
if (ret < 0) {
dev_err(&clientp->dev, "i2c_smbus_write_bytes() to cmd "
"reg failed in taos_probe(), err = %d\n", ret);
- goto fail1;
+ goto fail2;
}
ret = i2c_smbus_read_byte(clientp);
if (ret < 0) {
dev_err(&clientp->dev, "i2c_smbus_read_byte from "
"reg failed in taos_probe(), err = %d\n", ret);
- goto fail1;
+ goto fail2;
}
buf[i] = ret;
}
if (!taos_tsl258x_device(buf)) {
dev_info(&clientp->dev, "i2c device found but does not match "
"expected id in taos_probe()\n");
- goto fail1;
+ goto fail2;
}
ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
if (ret < 0) {
dev_err(&clientp->dev, "i2c_smbus_write_byte() to cmd reg "
"failed in taos_probe(), err = %d\n", ret);
- goto fail1;
+ goto fail2;
}
- chip->iio_dev = iio_allocate_device(0);
- if (!chip->iio_dev) {
- ret = -ENOMEM;
- dev_err(&clientp->dev, "iio allocation failed\n");
- goto fail1;
- }
-
- chip->iio_dev->info = &tsl2583_info;
- chip->iio_dev->dev.parent = &clientp->dev;
- chip->iio_dev->dev_data = (void *)(chip);
- chip->iio_dev->modes = INDIO_DIRECT_MODE;
- ret = iio_device_register(chip->iio_dev);
+ indio_dev->info = &tsl2583_info;
+ indio_dev->dev.parent = &clientp->dev;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->name = chip->client->name;
+ ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&clientp->dev, "iio registration failed\n");
- goto fail1;
+ goto fail2;
}
/* Load up the V2 defaults (these are hard coded defaults for now) */
taos_defaults(chip);
/* Make sure the chip is on */
- taos_chip_on(clientp);
+ taos_chip_on(indio_dev);
dev_info(&clientp->dev, "Light sensor found.\n");
-
return 0;
-
fail1:
- kfree(chip);
-
+ iio_free_device(indio_dev);
+fail2:
return ret;
}
static int taos_suspend(struct i2c_client *client, pm_message_t state)
{
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
int ret = 0;
mutex_lock(&chip->als_mutex);
if (chip->taos_chip_status == TSL258X_CHIP_WORKING) {
- ret = taos_chip_off(client);
+ ret = taos_chip_off(indio_dev);
chip->taos_chip_status = TSL258X_CHIP_SUSPENDED;
}
static int taos_resume(struct i2c_client *client)
{
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct tsl2583_chip *chip = iio_priv(indio_dev);
int ret = 0;
mutex_lock(&chip->als_mutex);
if (chip->taos_chip_status == TSL258X_CHIP_SUSPENDED)
- ret = taos_chip_on(client);
+ ret = taos_chip_on(indio_dev);
mutex_unlock(&chip->als_mutex);
return ret;
static int __devexit taos_remove(struct i2c_client *client)
{
- struct tsl2583_chip *chip = i2c_get_clientdata(client);
-
- iio_device_unregister(chip->iio_dev);
+ iio_device_unregister(i2c_get_clientdata(client));
- kfree(chip);
return 0;
}
projects / openwrt / staging / blogic.git / commitdiff