u-boot-mvebu: update to 2018.03

This release brings various improvements to clearfog support, such as distro-boot.
Obsoletes:
0002-clearfog-reset-usom-onboard-1512-phy.patch
0003-clearfog-enable-distro-boot-code.patch

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>

diff --git a/package/boot/uboot-mvebu/Makefile b/package/boot/uboot-mvebu/Makefile
index cb48b67406ef45778274547a59ea0080b79481ad..3005e45c46ace5b271d518ce7e1467a6b7ca302c 100644 (file)
--- a/package/boot/uboot-mvebu/Makefile
+++ b/package/boot/uboot-mvebu/Makefile
@@ -8,10 +8,10 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2017.03
+PKG_VERSION:=2018.03
 PKG_RELEASE:=1
 
-PKG_HASH:=f54baf3f9325bf444c7905f3a5b6f83680edb1e6e1a4d5f8a5ad80abe885113f
+PKG_HASH:=7e7477534409d5368eb1371ffde6820f0f79780a1a1f676161c48442cb303dfd
 
 include $(INCLUDE_DIR)/u-boot.mk
 include $(INCLUDE_DIR)/package.mk

diff --git a/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch b/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch
deleted file mode 100644 (file)
index 164c6f3..0000000
--- a/package/boot/uboot-mvebu/patches/0002-clearfog-reset-usom-onboard-1512-phy.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 98848106b9558244ae36a85229caabcdb57d0f7b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 23 Sep 2016 13:58:14 +0200
-Subject: [PATCH 2/4] clearfog: reset usom onboard 1512 phy
-
-Use GPIO19 which is wired to the uSOM phy reset signal in order to reset
-the uSOM's 88E81512 gigabit Ethernet phy.
-
-This GPIO is valid on ClearFog rev 2.1 and newer.
-
-Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
-[jonas.gorski: adapted to upstream u-boot code]
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- board/solidrun/clearfog/clearfog.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
-index 2773f5957e..3a8257cac3 100644
---- a/board/solidrun/clearfog/clearfog.c
-+++ b/board/solidrun/clearfog/clearfog.c
-@@ -131,8 +131,12 @@ int board_init(void)
-       /* Toggle GPIO41 to reset onboard switch and phy */
-       clrbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
-       clrbits_le32(MVEBU_GPIO1_BASE + 0x4, BIT(9));
-+      /* GPIO 19 on ClearFog rev 2.1 controls the uSOM onboard phy reset */
-+      clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
-+      clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19));
-       mdelay(1);
-       setbits_le32(MVEBU_GPIO1_BASE + 0x0, BIT(9));
-+      setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));
-       mdelay(10);
- 
-       /* Init I2C IO expanders */
--- 
-2.12.2
-

diff --git a/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch b/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch
deleted file mode 100644 (file)
index 97b2d1f..0000000
--- a/package/boot/uboot-mvebu/patches/0003-clearfog-enable-distro-boot-code.patch
+++ /dev/null
@@ -1,97 +0,0 @@
-From 9653921eadd5d5268afbee6c928708158fc4e844 Mon Sep 17 00:00:00 2001
-From: Josua Mayer <josua.mayer97@gmail.com>
-Date: Tue, 22 Nov 2016 16:33:23 +0100
-Subject: [PATCH 3/4] clearfog: enable distro boot code
-
-load addresses start at 0x02000000, leaving enough space for fdt,
-boot scripts and ramdisk at the end.
-Only boot from mmc, the other options are not in working order.
-Removed *_high variables in good faith. They can be re-added with sane
-values when, and if required.
-
-Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
----
- Kconfig                    |  1 +
- include/configs/clearfog.h | 47 +++++++++++++++++++++++++++++++++++++++++-----
- 2 files changed, 43 insertions(+), 5 deletions(-)
-
-diff --git a/Kconfig b/Kconfig
-index 81b4226463..f7aec2255b 100644
---- a/Kconfig
-+++ b/Kconfig
-@@ -59,6 +59,7 @@ config DISTRO_DEFAULTS
-       default y if ARCH_LS2080A
-       default y if ARCH_MESON
-       default y if ARCH_ROCKCHIP
-+      default y if TARGET_CLEARFOG
-       default n
-       select CMD_BOOTZ if ARM && !ARM64
-       select CMD_BOOTI if ARM64
-diff --git a/include/configs/clearfog.h b/include/configs/clearfog.h
-index 0c51d2a288..890dd84b5d 100644
---- a/include/configs/clearfog.h
-+++ b/include/configs/clearfog.h
-@@ -79,11 +79,6 @@
- 
- #define CONFIG_SYS_ALT_MEMTEST
- 
--/* Keep device tree and initrd in lower memory so the kernel can access them */
--#define CONFIG_EXTRA_ENV_SETTINGS     \
--      "fdt_high=0x10000000\0"         \
--      "initrd_high=0x10000000\0"
--
- /* SPL */
- /*
-  * Select the boot device here
-@@ -128,6 +123,48 @@
- #endif
- #endif
- 
-+#ifndef CONFIG_SPL_BUILD
-+/*
-+ * Add standard bootenv from distro boot code:
-+ * Keep device tree and initrd in lower memory so the kernel can access them
-+ * Set default load addresses:
-+ *  - 63MiB space for kernel
-+ *  - 1MiB space for fdt
-+ *  - 1MiB space for extlinux file, or boot script
-+ *  - remainder for ramdisk
-+ * Keep device tree and initrd in lower memory so the kernel can access them
-+ * Set name of fdt file (default to Clearfog Pro)
-+ * specify console device
-+ */
-+#define CONFIG_EXTRA_ENV_SETTINGS     \
-+      "kernel_addr_r=0x02000000\0" \
-+      "fdt_addr_r=0x05f00000\0" \
-+      "pxefile_addr_r=0x06000000\0" \
-+      "scriptaddr=0x06000000\0" \
-+      "ramdisk_addr_r=0x06100000\0" \
-+      "fdt_high=0x10000000\0" \
-+      "initrd_high=0x10000000\0" \
-+      "fdtfile=armada-388-clearfog-pro.dtb\0" \
-+      "console=ttyS0," __stringify(CONFIG_BAUDRATE) "\0" \
-+      BOOTENV
-+
-+/* include distro boot code defaults */
-+#include <config_distro_defaults.h>
-+
-+/*
-+ * specify boot order
-+ * sdcard or emmc -> usb -> network
-+ */
-+#define BOOT_TARGET_DEVICES(func) \
-+      func(MMC, mmc, 0) \
-+      func(USB, usb, 0) \
-+      func(PXE, pxe, na) \
-+      func(DHCP, dhcp, na)
-+
-+/* include the actual distro boot code */
-+#include <config_distro_bootcmd.h>
-+#endif
-+
- /*
-  * mv-common.h should be defined after CMD configs since it used them
-  * to enable certain macros
--- 
-2.12.2
-