int sja1105_spi_send_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 reg_addr,
void *packed_buf, size_t size_bytes);
-int sja1105_spi_send_int(const struct sja1105_private *priv,
- sja1105_spi_rw_mode_t rw, u64 reg_addr,
- u64 *value, u64 size_bytes);
+int sja1105_xfer_u32(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value);
+int sja1105_xfer_u64(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value);
int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv,
sja1105_spi_rw_mode_t rw, u64 base_addr,
void *packed_buf, u64 buf_len);
const struct sja1105_regs *regs = priv->info->regs;
u8 prod_id[SJA1105_SIZE_DEVICE_ID] = {0};
struct device *dev = &priv->spidev->dev;
- u64 device_id;
+ u32 device_id;
u64 part_no;
int rc;
- rc = sja1105_spi_send_int(priv, SPI_READ, regs->device_id,
- &device_id, SJA1105_SIZE_DEVICE_ID);
+ rc = sja1105_xfer_u32(priv, SPI_READ, regs->device_id, &device_id);
if (rc < 0)
return rc;
if (device_id != priv->info->device_id) {
- dev_err(dev, "Expected device ID 0x%llx but read 0x%llx\n",
+ dev_err(dev, "Expected device ID 0x%llx but read 0x%x\n",
priv->info->device_id, device_id);
return -ENODEV;
}
#include <linux/packing.h>
#include "sja1105.h"
-#define SJA1105_SIZE_PORT_CTRL 4
#define SJA1105_SIZE_RESET_CMD 4
#define SJA1105_SIZE_SPI_MSG_HEADER 4
#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4)
/* If @rw is:
* - SPI_WRITE: creates and sends an SPI write message at absolute
- * address reg_addr, taking size_bytes from *packed_buf
+ * address reg_addr
* - SPI_READ: creates and sends an SPI read message from absolute
- * address reg_addr, writing size_bytes into *packed_buf
+ * address reg_addr
*
* The u64 *value is unpacked, meaning that it's stored in the native
* CPU endianness and directly usable by software running on the core.
- *
- * This is a wrapper around sja1105_spi_send_packed_buf().
*/
-int sja1105_spi_send_int(const struct sja1105_private *priv,
- sja1105_spi_rw_mode_t rw, u64 reg_addr,
- u64 *value, u64 size_bytes)
+int sja1105_xfer_u64(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u64 *value)
{
- u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN];
+ u8 packed_buf[8];
int rc;
- if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN)
- return -ERANGE;
-
if (rw == SPI_WRITE)
- sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0,
- size_bytes);
+ sja1105_pack(packed_buf, value, 63, 0, 8);
- rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf,
- size_bytes);
+ rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf, 8);
if (rw == SPI_READ)
- sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0,
- size_bytes);
+ sja1105_unpack(packed_buf, value, 63, 0, 8);
+
+ return rc;
+}
+
+/* Same as above, but transfers only a 4 byte word */
+int sja1105_xfer_u32(const struct sja1105_private *priv,
+ sja1105_spi_rw_mode_t rw, u64 reg_addr, u32 *value)
+{
+ u8 packed_buf[4];
+ u64 tmp;
+ int rc;
+
+ if (rw == SPI_WRITE) {
+ /* The packing API only supports u64 as CPU word size,
+ * so we need to convert.
+ */
+ tmp = *value;
+ sja1105_pack(packed_buf, &tmp, 31, 0, 4);
+ }
+
+ rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf, 4);
+
+ if (rw == SPI_READ) {
+ sja1105_unpack(packed_buf, &tmp, 31, 0, 4);
+ *value = tmp;
+ }
return rc;
}
unsigned long port_bitmap, bool tx_inhibited)
{
const struct sja1105_regs *regs = priv->info->regs;
- u64 inhibit_cmd;
+ u32 inhibit_cmd;
int rc;
- rc = sja1105_spi_send_int(priv, SPI_READ, regs->port_control,
- &inhibit_cmd, SJA1105_SIZE_PORT_CTRL);
+ rc = sja1105_xfer_u32(priv, SPI_READ, regs->port_control,
+ &inhibit_cmd);
if (rc < 0)
return rc;
else
inhibit_cmd &= ~port_bitmap;
- return sja1105_spi_send_int(priv, SPI_WRITE, regs->port_control,
- &inhibit_cmd, SJA1105_SIZE_PORT_CTRL);
+ return sja1105_xfer_u32(priv, SPI_WRITE, regs->port_control,
+ &inhibit_cmd);
}
struct sja1105_status {