mtd:fsl-quadspi:use the property fields of SPI-NOR

We can get the read/write/erase opcode from the spi nor framework
directly. This patch uses the information stored in the SPI-NOR to
remove the hardcode in the fsl_qspi_init_lut().

Signed-off-by: Yunhui Cui <B56489@freescale.com>
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
Acked-by: Han xu <han.xu@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index b4d8953fb30a4cc7efe59e62e2eadff3d60a2c9e..c1ebefbbc145366cd58864affce31b9888eb574a 100644 (file)
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -373,9 +373,13 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
        void __iomem *base = q->iobase;
        int rxfifo = q->devtype_data->rxfifo;
        u32 lut_base;
-       u8 cmd, addrlen, dummy;
        int i;
 
+       struct spi_nor *nor = &q->nor[0];
+       u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
+       u8 read_op = nor->read_opcode;
+       u8 read_dm = nor->read_dummy;
+
        fsl_qspi_unlock_lut(q);
 
        /* Clear all the LUT table */
@@ -385,20 +389,10 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
        /* Quad Read */
        lut_base = SEQID_QUAD_READ * 4;
 
-       if (q->nor_size <= SZ_16M) {
-               cmd = SPINOR_OP_READ_1_1_4;
-               addrlen = ADDR24BIT;
-               dummy = 8;
-       } else {
-               /* use the 4-byte address */
-               cmd = SPINOR_OP_READ_1_1_4;
-               addrlen = ADDR32BIT;
-               dummy = 8;
-       }
-
-       qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+       qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen),
                        base + QUADSPI_LUT(lut_base));
-       qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo),
+       qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
+                   LUT1(FSL_READ, PAD4, rxfifo),
                        base + QUADSPI_LUT(lut_base + 1));
 
        /* Write enable */
@@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
        /* Page Program */
        lut_base = SEQID_PP * 4;
 
-       if (q->nor_size <= SZ_16M) {
-               cmd = SPINOR_OP_PP;
-               addrlen = ADDR24BIT;
-       } else {
-               /* use the 4-byte address */
-               cmd = SPINOR_OP_PP;
-               addrlen = ADDR32BIT;
-       }
-
-       qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+       qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) |
+                   LUT1(ADDR, PAD1, addrlen),
                        base + QUADSPI_LUT(lut_base));
        qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0),
                        base + QUADSPI_LUT(lut_base + 1));
@@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
        /* Erase a sector */
        lut_base = SEQID_SE * 4;
 
-       cmd = q->nor[0].erase_opcode;
-       addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT;
-
-       qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen),
+       qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) |
+                   LUT1(ADDR, PAD1, addrlen),
                        base + QUADSPI_LUT(lut_base));
 
        /* Erase the whole chip */