-// SPDX-License-Identifier: (GPL-2.0 OR MIT)\r
-\r
-/dts-v1/;\r
-\r
-#include <dt-bindings/leds/common.h>\r
-\r
-#include "mt7981.dtsi"\r
-\r
-/ {\r
- model = "Cudy WR3000S v1";\r
- compatible = "cudy,wr3000s-v1", "mediatek,mt7981-spim-snand-rfb";\r
-\r
- aliases {\r
- label-mac-device = &gmac0;\r
- led-boot = &led_status;\r
- led-failsafe = &led_status;\r
- led-running = &led_status;\r
- led-upgrade = &led_status;\r
- serial0 = &uart0;\r
- };\r
-\r
- chosen {\r
- stdout-path = "serial0:115200n8";\r
- };\r
-\r
- gpio-keys {\r
- compatible = "gpio-keys";\r
-\r
- reset {\r
- label = "reset";\r
- linux,code = <KEY_RESTART>;\r
- gpios = <&pio 1 GPIO_ACTIVE_LOW>;\r
- };\r
-\r
- wps {\r
- label = "wps";\r
- linux,code = <KEY_WPS_BUTTON>;\r
- gpios = <&pio 0 GPIO_ACTIVE_LOW>;\r
- };\r
- };\r
-\r
- leds {\r
- compatible = "gpio-leds";\r
-\r
- led_status: led@0 {\r
- function = LED_FUNCTION_STATUS;\r
- color = <LED_COLOR_ID_WHITE>;\r
- gpios = <&pio 10 GPIO_ACTIVE_LOW>;\r
- };\r
-\r
-\r
- led_internet {\r
- function = LED_FUNCTION_WAN_ONLINE;\r
- color = <LED_COLOR_ID_WHITE>;\r
- gpios = <&pio 11 GPIO_ACTIVE_LOW>;\r
- };\r
-\r
- led_wps {\r
- function = LED_FUNCTION_WPS;\r
- color = <LED_COLOR_ID_WHITE>;\r
- gpios = <&pio 9 GPIO_ACTIVE_LOW>;\r
- };\r
-\r
- led_wlan2g {\r
- function = LED_FUNCTION_WLAN_2GHZ;\r
- color = <LED_COLOR_ID_WHITE>;\r
- gpios = <&pio 6 GPIO_ACTIVE_LOW>;\r
- linux,default-trigger = "phy0tpt";\r
- };\r
-\r
- led_wlan5g {\r
- function = LED_FUNCTION_WLAN_5GHZ;\r
- color = <LED_COLOR_ID_WHITE>;\r
- gpios = <&pio 7 GPIO_ACTIVE_LOW>;\r
- linux,default-trigger = "phy1tpt";\r
- };\r
- };\r
-};\r
-\r
-&uart0 {\r
- status = "okay";\r
-};\r
-\r
-&watchdog {\r
- status = "okay";\r
-};\r
-\r
-ð {\r
- pinctrl-names = "default";\r
- pinctrl-0 = <&mdio_pins>;\r
-\r
- status = "okay";\r
-\r
- gmac0: mac@0 {\r
- compatible = "mediatek,eth-mac";\r
- reg = <0>;\r
- phy-mode = "2500base-x";\r
-\r
- nvmem-cell-names = "mac-address";\r
- nvmem-cells = <&macaddr_bdinfo_de00 0>;\r
-\r
- fixed-link {\r
- speed = <2500>;\r
- full-duplex;\r
- pause;\r
- };\r
- };\r
-};\r
-\r
-&mdio_bus {\r
- switch: switch@1f {\r
- compatible = "mediatek,mt7531";\r
- reg = <31>;\r
- reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;\r
- interrupt-controller;\r
- #interrupt-cells = <1>;\r
- interrupt-parent = <&pio>;\r
- interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;\r
- };\r
-};\r
-\r
-&spi0 {\r
- pinctrl-names = "default";\r
- pinctrl-0 = <&spi0_flash_pins>;\r
- status = "okay";\r
-\r
- spi_nand: flash@0 {\r
- #address-cells = <1>;\r
- #size-cells = <1>;\r
- compatible = "spi-nand";\r
- reg = <0>;\r
- spi-max-frequency = <52000000>;\r
-\r
- spi-cal-enable;\r
- spi-cal-mode = "read-data";\r
- spi-cal-datalen = <7>;\r
- spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;\r
- spi-cal-addrlen = <5>;\r
- spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;\r
-\r
- spi-tx-bus-width = <4>;\r
- spi-rx-bus-width = <4>;\r
- mediatek,nmbm;\r
- mediatek,bmt-max-ratio = <1>;\r
- mediatek,bmt-max-reserved-blocks = <64>;\r
-\r
- partitions {\r
- compatible = "fixed-partitions";\r
- #address-cells = <1>;\r
- #size-cells = <1>;\r
-\r
- partition@0 {\r
- label = "BL2";\r
- reg = <0x00000 0x0100000>;\r
- read-only;\r
- };\r
-\r
- partition@100000 {\r
- label = "u-boot-env";\r
- reg = <0x0100000 0x0080000>;\r
- read-only;\r
- };\r
-\r
- factory: partition@180000 {\r
- label = "Factory";\r
- reg = <0x180000 0x0200000>;\r
- read-only;\r
- nvmem-layout {\r
- compatible = "fixed-layout";\r
- #address-cells = <1>;\r
- #size-cells = <1>;\r
-\r
- eeprom_factory_0: eeprom@0 {\r
- reg = <0x0 0x1000>;\r
- };\r
- };\r
- };\r
-\r
- partition@380000 {\r
- label = "bdinfo";\r
- reg = <0x380000 0x0040000>;\r
- read-only;\r
- nvmem-layout {\r
- compatible = "fixed-layout";\r
- #address-cells = <1>;\r
- #size-cells = <1>;\r
-\r
- macaddr_bdinfo_de00: macaddr@de00 {\r
- compatible = "mac-base";\r
- reg = <0xde00 0x6>;\r
- #nvmem-cell-cells = <1>;\r
- };\r
- };\r
- };\r
-\r
- partition@3C0000 {\r
- label = "FIP";\r
- reg = <0x3C0000 0x0200000>;\r
- read-only;\r
- };\r
-\r
- partition@580000 {\r
- label = "ubi";\r
- reg = <0x5C0000 0x4000000>;\r
- compatible = "linux,ubi";\r
- };\r
- };\r
- };\r
-};\r
-\r
-&pio {\r
- spi0_flash_pins: spi0-pins {\r
- mux {\r
- function = "spi";\r
- groups = "spi0", "spi0_wp_hold";\r
- };\r
- conf-pu {\r
- pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";\r
- drive-strength = <MTK_DRIVE_8mA>;\r
- bias-pull-up = <MTK_PUPD_SET_R1R0_11>;\r
- };\r
-\r
- conf-pd {\r
- pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";\r
- drive-strength = <MTK_DRIVE_8mA>;\r
- bias-pull-down = <MTK_PUPD_SET_R1R0_11>;\r
- };\r
- };\r
-};\r
-\r
-&switch {\r
- ports {\r
- #address-cells = <1>;\r
- #size-cells = <0>;\r
-\r
- port@0 {\r
- reg = <0>;\r
- label = "wan";\r
-\r
- nvmem-cell-names = "mac-address";\r
- nvmem-cells = <&macaddr_bdinfo_de00 1>;\r
- };\r
-\r
- port@1 {\r
- reg = <1>;\r
- label = "lan1";\r
- };\r
-\r
- port@2 {\r
- reg = <2>;\r
- label = "lan2";\r
- };\r
-\r
- port@3 {\r
- reg = <3>;\r
- label = "lan3";\r
- };\r
-\r
- port@4 {\r
- reg = <4>;\r
- label = "lan4";\r
- };\r
-\r
- port@6 {\r
- reg = <6>;\r
- label = "cpu";\r
- ethernet = <&gmac0>;\r
- phy-mode = "2500base-x";\r
-\r
- fixed-link {\r
- speed = <2500>;\r
- full-duplex;\r
- pause;\r
- };\r
- };\r
- };\r
-};\r
-\r
-&wifi {\r
- status = "okay";\r
- nvmem-cells = <&eeprom_factory_0>;\r
- nvmem-cell-names = "eeprom";\r
-};\r
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981.dtsi"
+
+/ {
+ model = "Cudy WR3000S v1";
+ compatible = "cudy,wr3000s-v1", "mediatek,mt7981-spim-snand-rfb";
+
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status: led@0 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+ };
+
+
+ led_internet {
+ function = LED_FUNCTION_WAN_ONLINE;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wps {
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ led_wlan2g {
+ function = LED_FUNCTION_WLAN_2GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_wlan5g {
+ function = LED_FUNCTION_WLAN_5GHZ;
+ color = <LED_COLOR_ID_WHITE>;
+ gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ status = "okay";
+
+ gmac0: mac@0 {
+ compatible = "mediatek,eth-mac";
+ reg = <0>;
+ phy-mode = "2500base-x";
+
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_bdinfo_de00 0>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+};
+
+&mdio_bus {
+ switch: switch@1f {
+ compatible = "mediatek,mt7531";
+ reg = <31>;
+ reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+ };
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_flash_pins>;
+ status = "okay";
+
+ spi_nand: flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <52000000>;
+
+ spi-cal-enable;
+ spi-cal-mode = "read-data";
+ spi-cal-datalen = <7>;
+ spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4E 0x41 0x4E 0x44>;
+ spi-cal-addrlen = <5>;
+ spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
+
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ mediatek,nmbm;
+ mediatek,bmt-max-ratio = <1>;
+ mediatek,bmt-max-reserved-blocks = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "BL2";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x0100000 0x0080000>;
+ read-only;
+ };
+
+ factory: partition@180000 {
+ label = "Factory";
+ reg = <0x180000 0x0200000>;
+ read-only;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x1000>;
+ };
+ };
+ };
+
+ partition@380000 {
+ label = "bdinfo";
+ reg = <0x380000 0x0040000>;
+ read-only;
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_bdinfo_de00: macaddr@de00 {
+ compatible = "mac-base";
+ reg = <0xde00 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
+ };
+
+ partition@3C0000 {
+ label = "FIP";
+ reg = <0x3C0000 0x0200000>;
+ read-only;
+ };
+
+ partition@580000 {
+ label = "ubi";
+ reg = <0x5C0000 0x4000000>;
+ compatible = "linux,ubi";
+ };
+ };
+ };
+};
+
+&pio {
+ spi0_flash_pins: spi0-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ conf-pu {
+ pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
+ };
+
+ conf-pd {
+ pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
+ };
+ };
+};
+
+&switch {
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "wan";
+
+ nvmem-cell-names = "mac-address";
+ nvmem-cells = <&macaddr_bdinfo_de00 1>;
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan4";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "2500base-x";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+ nvmem-cells = <&eeprom_factory_0>;
+ nvmem-cell-names = "eeprom";
+};
projects / openwrt / openwrt.git / commitdiff