bnx2x: Fix remote fault handling

Fix couple of issues of remote fault detection and handling:
Link may go down due to remote fault indications during link establishment.
Possible link down after primary function migration.
Remote fault was not detected on 578xx.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index 06727f32e5050a9c43a09a2363008f1c02045f17..dc24de40e33608b239dbfd455319efab44c82d4a 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -1204,6 +1204,8 @@ struct drv_port_mb {
 
        #define LINK_STATUS_PFC_ENABLED                         0x20000000
 
+       #define LINK_STATUS_PHYSICAL_LINK_FLAG                  0x40000000
+
        u32 port_stx;
 
        u32 stat_nig_timer;

diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 0a7091d3de2966f8ce9627a5ddd005d854295c70..8e68e1582ec25b0182dc276a172e5dae3bf864b0 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -1745,6 +1745,10 @@ static int bnx2x_emac_enable(struct link_params *params,
 
        DP(NETIF_MSG_LINK, "enabling EMAC\n");
 
+       /* Disable BMAC */
+       REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR,
+              (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << port));
+
        /* enable emac and not bmac */
        REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 1);
 
@@ -2599,12 +2603,6 @@ static int bnx2x_bmac1_enable(struct link_params *params,
        REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LLFC_MSG_FLDS,
                    wb_data, 2);
 
-       if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
-               REG_RD_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_LSS_STATUS,
-                           wb_data, 2);
-               if (wb_data[0] > 0)
-                       return -ESRCH;
-       }
        return 0;
 }
 
@@ -2670,16 +2668,6 @@ static int bnx2x_bmac2_enable(struct link_params *params,
        udelay(30);
        bnx2x_update_pfc_bmac2(params, vars, is_lb);
 
-       if (vars->phy_flags & PHY_TX_ERROR_CHECK_FLAG) {
-               REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_LSS_STAT,
-                           wb_data, 2);
-               if (wb_data[0] > 0) {
-                       DP(NETIF_MSG_LINK, "Got bad LSS status 0x%x\n",
-                                      wb_data[0]);
-                       return -ESRCH;
-               }
-       }
-
        return 0;
 }
 
@@ -4369,6 +4357,9 @@ void bnx2x_link_status_update(struct link_params *params,
 
        vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP);
        vars->phy_flags = PHY_XGXS_FLAG;
+       if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
+               vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
+
        if (vars->link_up) {
                DP(NETIF_MSG_LINK, "phy link up\n");
 
@@ -4460,6 +4451,8 @@ void bnx2x_link_status_update(struct link_params *params,
 
                /* indicate no mac active */
                vars->mac_type = MAC_TYPE_NONE;
+               if (vars->link_status & LINK_STATUS_PHYSICAL_LINK_FLAG)
+                       vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
        }
 
        /* Sync media type */
@@ -6176,6 +6169,7 @@ static int bnx2x_update_link_down(struct link_params *params,
        /* update shared memory */
        vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
                               LINK_STATUS_LINK_UP |
+                              LINK_STATUS_PHYSICAL_LINK_FLAG |
                               LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
                               LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
                               LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
@@ -6213,7 +6207,8 @@ static int bnx2x_update_link_up(struct link_params *params,
        u8 port = params->port;
        int rc = 0;
 
-       vars->link_status |= LINK_STATUS_LINK_UP;
+       vars->link_status |= (LINK_STATUS_LINK_UP |
+                             LINK_STATUS_PHYSICAL_LINK_FLAG);
        vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG;
 
        if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
@@ -8132,7 +8127,6 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
                                 offsetof(struct shmem_region, dev_info.
                                          port_feature_config[params->port].
                                          config));
-
                bnx2x_set_gpio_int(bp, gpio_num,
                                   MISC_REGISTERS_GPIO_INT_OUTPUT_SET,
                                   gpio_port);
@@ -8141,8 +8135,9 @@ void bnx2x_handle_module_detect_int(struct link_params *params)
                 * Disable transmit for this module
                 */
                phy->media_type = ETH_PHY_NOT_PRESENT;
-               if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
-                   PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER)
+               if (((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) ==
+                    PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) ||
+                   CHIP_IS_E3(bp))
                        bnx2x_sfp_set_transmitter(params, phy, 0);
        }
 }
@@ -8244,9 +8239,6 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
        u16 cnt, val, tmp1;
        struct bnx2x *bp = params->bp;
 
-       /* SPF+ PHY: Set flag to check for Tx error */
-       vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
        bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2,
                       MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port);
        /* HW reset */
@@ -8430,9 +8422,6 @@ static int bnx2x_8726_config_init(struct bnx2x_phy *phy,
        struct bnx2x *bp = params->bp;
        DP(NETIF_MSG_LINK, "Initializing BCM8726\n");
 
-       /* SPF+ PHY: Set flag to check for Tx error */
-       vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
        bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15);
        bnx2x_wait_reset_complete(bp, phy, params);
 
@@ -8601,9 +8590,6 @@ static int bnx2x_8727_config_init(struct bnx2x_phy *phy,
        struct bnx2x *bp = params->bp;
        /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */
 
-       /* SPF+ PHY: Set flag to check for Tx error */
-       vars->phy_flags = PHY_TX_ERROR_CHECK_FLAG;
-
        bnx2x_wait_reset_complete(bp, phy, params);
        rx_alarm_ctrl_val = (1<<2) | (1<<5) ;
        /* Should be 0x6 to enable XS on Tx side. */
@@ -10619,7 +10605,8 @@ static struct bnx2x_phy phy_warpcore = {
        .type           = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
        .addr           = 0xff,
        .def_md_devad   = 0,
-       .flags          = FLAGS_HW_LOCK_REQUIRED,
+       .flags          = (FLAGS_HW_LOCK_REQUIRED |
+                          FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -10745,7 +10732,8 @@ static struct bnx2x_phy phy_8706 = {
        .type           = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
        .addr           = 0xff,
        .def_md_devad   = 0,
-       .flags          = FLAGS_INIT_XGXS_FIRST,
+       .flags          = (FLAGS_INIT_XGXS_FIRST |
+                          FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -10776,7 +10764,8 @@ static struct bnx2x_phy phy_8726 = {
        .addr           = 0xff,
        .def_md_devad   = 0,
        .flags          = (FLAGS_HW_LOCK_REQUIRED |
-                          FLAGS_INIT_XGXS_FIRST),
+                          FLAGS_INIT_XGXS_FIRST |
+                          FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -10807,7 +10796,8 @@ static struct bnx2x_phy phy_8727 = {
        .type           = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
        .addr           = 0xff,
        .def_md_devad   = 0,
-       .flags          = FLAGS_FAN_FAILURE_DET_REQ,
+       .flags          = (FLAGS_FAN_FAILURE_DET_REQ |
+                          FLAGS_TX_ERROR_CHECK),
        .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff},
        .mdio_ctrl      = 0,
@@ -12194,10 +12184,6 @@ static void bnx2x_analyze_link_error(struct link_params *params,
        u8 led_mode;
        u32 half_open_conn = (vars->phy_flags & PHY_HALF_OPEN_CONN_FLAG) > 0;
 
-       /*DP(NETIF_MSG_LINK, "CHECK LINK: %x half_open:%x-> lss:%x\n",
-                      vars->link_up,
-                      half_open_conn, lss_status);*/
-
        if ((lss_status ^ half_open_conn) == 0)
                return;
 
@@ -12210,6 +12196,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
         * b. Update link_vars->link_up
         */
        if (lss_status) {
+               DP(NETIF_MSG_LINK, "Remote Fault detected !!!\n");
                vars->link_status &= ~LINK_STATUS_LINK_UP;
                vars->link_up = 0;
                vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG;
@@ -12219,6 +12206,7 @@ static void bnx2x_analyze_link_error(struct link_params *params,
                 */
                led_mode = LED_MODE_OFF;
        } else {
+               DP(NETIF_MSG_LINK, "Remote Fault cleared\n");
                vars->link_status |= LINK_STATUS_LINK_UP;
                vars->link_up = 1;
                vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
@@ -12235,6 +12223,15 @@ static void bnx2x_analyze_link_error(struct link_params *params,
        bnx2x_notify_link_changed(bp);
 }
 
+/******************************************************************************
+* Description:
+*      This function checks for half opened connection change indication.
+*      When such change occurs, it calls the bnx2x_analyze_link_error
+*      to check if Remote Fault is set or cleared. Reception of remote fault
+*      status message in the MAC indicates that the peer's MAC has detected
+*      a fault, for example, due to break in the TX side of fiber.
+*
+******************************************************************************/
 static void bnx2x_check_half_open_conn(struct link_params *params,
                                       struct link_vars *vars)
 {
@@ -12245,9 +12242,28 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
        if ((vars->phy_flags & PHY_PHYSICAL_LINK_FLAG) == 0)
                return;
 
-       if (!CHIP_IS_E3(bp) &&
+       if (CHIP_IS_E3(bp) &&
            (REG_RD(bp, MISC_REG_RESET_REG_2) &
-                  (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))) {
+             (MISC_REGISTERS_RESET_REG_2_XMAC))) {
+               /* Check E3 XMAC */
+               /*
+                * Note that link speed cannot be queried here, since it may be
+                * zero while link is down. In case UMAC is active, LSS will
+                * simply not be set
+                */
+               mac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0;
+
+               /* Clear stick bits (Requires rising edge) */
+               REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS, 0);
+               REG_WR(bp, mac_base + XMAC_REG_CLEAR_RX_LSS_STATUS,
+                      XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS |
+                      XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS);
+               if (REG_RD(bp, mac_base + XMAC_REG_RX_LSS_STATUS))
+                       lss_status = 1;
+
+               bnx2x_analyze_link_error(params, vars, lss_status);
+       } else if (REG_RD(bp, MISC_REG_RESET_REG_2) &
+                  (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) {
                /* Check E1X / E2 BMAC */
                u32 lss_status_reg;
                u32 wb_data[2];
@@ -12269,14 +12285,20 @@ static void bnx2x_check_half_open_conn(struct link_params *params,
 void bnx2x_period_func(struct link_params *params, struct link_vars *vars)
 {
        struct bnx2x *bp = params->bp;
+       u16 phy_idx;
        if (!params) {
-               DP(NETIF_MSG_LINK, "Ininitliazed params !\n");
+               DP(NETIF_MSG_LINK, "Uninitialized params !\n");
                return;
        }
-       /* DP(NETIF_MSG_LINK, "Periodic called vars->phy_flags 0x%x speed 0x%x
-        RESET_REG_2 0x%x\n", vars->phy_flags, vars->line_speed,
-         REG_RD(bp, MISC_REG_RESET_REG_2)); */
-       bnx2x_check_half_open_conn(params, vars);
+
+       for (phy_idx = INT_PHY; phy_idx < MAX_PHYS; phy_idx++) {
+               if (params->phy[phy_idx].flags & FLAGS_TX_ERROR_CHECK) {
+                       bnx2x_set_aer_mmd(params, &params->phy[phy_idx]);
+                       bnx2x_check_half_open_conn(params, vars);
+                       break;
+               }
+       }
+
        if (CHIP_IS_E3(bp))
                bnx2x_check_over_curr(params, vars);
 }

diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index 6a7708d5da37fe02b11c4c675ae885ca5d4e96fc..7ee6b51f4fb8ef3997503cff01f1b94c775061e5 100644 (file)
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -145,6 +145,7 @@ struct bnx2x_phy {
 #define FLAGS_SFP_NOT_APPROVED         (1<<7)
 #define FLAGS_MDC_MDIO_WA              (1<<8)
 #define FLAGS_DUMMY_READ               (1<<9)
+#define FLAGS_TX_ERROR_CHECK           (1<<12)
 
        /* preemphasis values for the rx side */
        u16 rx_preemphasis[4];
@@ -276,7 +277,6 @@ struct link_vars {
 #define PHY_PHYSICAL_LINK_FLAG         (1<<2)
 #define PHY_HALF_OPEN_CONN_FLAG                (1<<3)
 #define PHY_OVER_CURRENT_FLAG          (1<<4)
-#define PHY_TX_ERROR_CHECK_FLAG                (1<<5)
 
        u8 mac_type;
 #define MAC_TYPE_NONE          0