can: flexcan: put TX mailbox into TX_INACTIVE mode after tx-complete

After sending a RTR frame the TX mailbox becomes a RX_EMPTY mailbox. To avoid
side effects when the RX-FIFO is full, this patch puts the TX mailbox into
TX_INACTIVE mode in the transmission complete interrupt handler. This, of
course, leaves a race window between the actual completion of the transmission
and the handling of tx-complete interrupt. However this is the best we can do
without busy polling the tx complete interrupt.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 54061c4bbf32d6ee63b5ab4335eb37cecfc51b80..c17ae9eb7278f8b8948ffefdf3cab46a5054a975 100644 (file)
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -765,6 +765,9 @@ static irqreturn_t flexcan_irq(int irq, void *dev_id)
                stats->tx_bytes += can_get_echo_skb(dev, 0);
                stats->tx_packets++;
                can_led_event(dev, CAN_LED_EVENT_TX);
+               /* after sending a RTR frame mailbox is in RX mode */
+               flexcan_write(FLEXCAN_MB_CODE_TX_INACTIVE,
+                             &regs->cantxfg[FLEXCAN_TX_BUF_ID].can_ctrl);
                flexcan_write((1 << FLEXCAN_TX_BUF_ID), &regs->iflag1);
                netif_wake_queue(dev);
        }