obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
pci-common.o
obj-$(CONFIG_PCI_MSI) += msi.o
+obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT) += audit.o
--- /dev/null
+/*
+ * RapidIO PPC32 support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rio.h>
+
+#include <asm/rio.h>
+
+/**
+ * platform_rio_init - Do platform specific RIO init
+ *
+ * Any platform specific initialization of RapdIO
+ * hardware is done here as well as registration
+ * of any active master ports in the system.
+ */
+void __attribute__ ((weak))
+ platform_rio_init(void)
+{
+ printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
+}
+
+/**
+ * ppc_rio_init - Do PPC32 RIO init
+ *
+ * Calls platform-specific RIO init code and then calls
+ * rio_init_mports() to initialize any master ports that
+ * have been registered with the RIO subsystem.
+ */
+static int __init ppc_rio_init(void)
+{
+ printk(KERN_INFO "RIO: RapidIO init\n");
+
+ /* Platform specific initialization */
+ platform_rio_init();
+
+ /* Enumerate all registered ports */
+ rio_init_mports();
+
+ return 0;
+}
+
+subsys_initcall(ppc_rio_init);
obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o
obj-$(CONFIG_FSL_SOC) += fsl_soc.o
obj-$(CONFIG_FSL_PCI) += fsl_pci.o
+obj-$(CONFIG_RAPIDIO) += fsl_rio.o
obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o
obj-$(CONFIG_QUICC_ENGINE) += qe_lib/
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
--- /dev/null
+/*
+ * MPC85xx RapidIO support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+
+#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
+#define RIO_ATMU_REGS_OFFSET 0x10c00
+#define RIO_MSG_REGS_OFFSET 0x11000
+#define RIO_MAINT_WIN_SIZE 0x400000
+#define RIO_DBELL_WIN_SIZE 0x1000
+
+#define RIO_MSG_OMR_MUI 0x00000002
+#define RIO_MSG_OSR_TE 0x00000080
+#define RIO_MSG_OSR_QOI 0x00000020
+#define RIO_MSG_OSR_QFI 0x00000010
+#define RIO_MSG_OSR_MUB 0x00000004
+#define RIO_MSG_OSR_EOMI 0x00000002
+#define RIO_MSG_OSR_QEI 0x00000001
+
+#define RIO_MSG_IMR_MI 0x00000002
+#define RIO_MSG_ISR_TE 0x00000080
+#define RIO_MSG_ISR_QFI 0x00000010
+#define RIO_MSG_ISR_DIQI 0x00000001
+
+#define RIO_MSG_DESC_SIZE 32
+#define RIO_MSG_BUFFER_SIZE 4096
+#define RIO_MIN_TX_RING_SIZE 2
+#define RIO_MAX_TX_RING_SIZE 2048
+#define RIO_MIN_RX_RING_SIZE 2
+#define RIO_MAX_RX_RING_SIZE 2048
+
+#define DOORBELL_DMR_DI 0x00000002
+#define DOORBELL_DSR_TE 0x00000080
+#define DOORBELL_DSR_QFI 0x00000010
+#define DOORBELL_DSR_DIQI 0x00000001
+#define DOORBELL_TID_OFFSET 0x03
+#define DOORBELL_SID_OFFSET 0x05
+#define DOORBELL_INFO_OFFSET 0x06
+
+#define DOORBELL_MESSAGE_SIZE 0x08
+#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+struct rio_atmu_regs {
+ u32 rowtar;
+ u32 pad1;
+ u32 rowbar;
+ u32 pad2;
+ u32 rowar;
+ u32 pad3[3];
+};
+
+struct rio_msg_regs {
+ u32 omr;
+ u32 osr;
+ u32 pad1;
+ u32 odqdpar;
+ u32 pad2;
+ u32 osar;
+ u32 odpr;
+ u32 odatr;
+ u32 odcr;
+ u32 pad3;
+ u32 odqepar;
+ u32 pad4[13];
+ u32 imr;
+ u32 isr;
+ u32 pad5;
+ u32 ifqdpar;
+ u32 pad6;
+ u32 ifqepar;
+ u32 pad7[250];
+ u32 dmr;
+ u32 dsr;
+ u32 pad8;
+ u32 dqdpar;
+ u32 pad9;
+ u32 dqepar;
+ u32 pad10[26];
+ u32 pwmr;
+ u32 pwsr;
+ u32 pad11;
+ u32 pwqbar;
+};
+
+struct rio_tx_desc {
+ u32 res1;
+ u32 saddr;
+ u32 dport;
+ u32 dattr;
+ u32 res2;
+ u32 res3;
+ u32 dwcnt;
+ u32 res4;
+};
+
+static u32 regs_win;
+static struct rio_atmu_regs *atmu_regs;
+static struct rio_atmu_regs *maint_atmu_regs;
+static struct rio_atmu_regs *dbell_atmu_regs;
+static u32 dbell_win;
+static u32 maint_win;
+static struct rio_msg_regs *msg_regs;
+
+static struct rio_dbell_ring {
+ void *virt;
+ dma_addr_t phys;
+} dbell_ring;
+
+static struct rio_msg_tx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+ dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+ int tx_slot;
+ int size;
+ void *dev_id;
+} msg_tx_ring;
+
+static struct rio_msg_rx_ring {
+ void *virt;
+ dma_addr_t phys;
+ void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+ int rx_slot;
+ int size;
+ void *dev_id;
+} msg_rx_ring;
+
+/**
+ * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+{
+ pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+ index, destid, data);
+ out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
+ out_be16((void *)(dbell_win), data);
+
+ return 0;
+}
+
+/**
+ * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+{
+ pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+ offset);
+ *data = in_be32((void *)(regs_win + offset));
+
+ return 0;
+}
+
+/**
+ * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+{
+ pr_debug
+ ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+ index, offset, data);
+ out_be32((void *)(regs_win + offset), data);
+
+ return 0;
+}
+
+/**
+ * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+ u32 * val)
+{
+ u8 *data;
+
+ pr_debug
+ ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+ index, destid, hopcount, offset, len);
+ out_be32((void *)&maint_atmu_regs->rowtar,
+ (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+ data = (u8 *) maint_win + offset;
+ switch (len) {
+ case 1:
+ *val = in_8((u8 *) data);
+ break;
+ case 2:
+ *val = in_be16((u16 *) data);
+ break;
+ default:
+ *val = in_be32((u32 *) data);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+ int len, u32 val)
+{
+ u8 *data;
+ pr_debug
+ ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+ index, destid, hopcount, offset, len, val);
+ out_be32((void *)&maint_atmu_regs->rowtar,
+ (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+ data = (u8 *) maint_win + offset;
+ switch (len) {
+ case 1:
+ out_8((u8 *) data, val);
+ break;
+ case 2:
+ out_be16((u16 *) data, val);
+ break;
+ default:
+ out_be32((u32 *) data, val);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+ void *buffer, size_t len)
+{
+ u32 omr;
+ struct rio_tx_desc *desc =
+ (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+ int ret = 0;
+
+ pr_debug
+ ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
+ rdev->destid, mbox, (int)buffer, len);
+
+ if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Copy and clear rest of buffer */
+ memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+ if (len < (RIO_MAX_MSG_SIZE - 4))
+ memset((void *)((u32) msg_tx_ring.
+ virt_buffer[msg_tx_ring.tx_slot] + len), 0,
+ RIO_MAX_MSG_SIZE - len);
+
+ /* Set mbox field for message */
+ desc->dport = mbox & 0x3;
+
+ /* Enable EOMI interrupt, set priority, and set destid */
+ desc->dattr = 0x28000000 | (rdev->destid << 2);
+
+ /* Set transfer size aligned to next power of 2 (in double words) */
+ desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+ /* Set snooping and source buffer address */
+ desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+
+ /* Increment enqueue pointer */
+ omr = in_be32((void *)&msg_regs->omr);
+ out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+ /* Go to next descriptor */
+ if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
+ msg_tx_ring.tx_slot = 0;
+
+ out:
+ return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+mpc85xx_rio_tx_handler(int irq, void *dev_instance)
+{
+ int osr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+ osr = in_be32((void *)&msg_regs->osr);
+
+ if (osr & RIO_MSG_OSR_TE) {
+ pr_info("RIO: outbound message transmission error\n");
+ out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_QOI) {
+ pr_info("RIO: outbound message queue overflow\n");
+ out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+ goto out;
+ }
+
+ if (osr & RIO_MSG_OSR_EOMI) {
+ u32 dqp = in_be32((void *)&msg_regs->odqdpar);
+ int slot = (dqp - msg_tx_ring.phys) >> 5;
+ port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+
+ /* Ack the end-of-message interrupt */
+ out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, j, rc = 0;
+
+ if ((entries < RIO_MIN_TX_RING_SIZE) ||
+ (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize shadow copy ring */
+ msg_tx_ring.dev_id = dev_id;
+ msg_tx_ring.size = entries;
+
+ for (i = 0; i < msg_tx_ring.size; i++) {
+ if (!
+ (msg_tx_ring.virt_buffer[i] =
+ dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ &msg_tx_ring.phys_buffer[i],
+ GFP_KERNEL))) {
+ rc = -ENOMEM;
+ for (j = 0; j < msg_tx_ring.size; j++)
+ if (msg_tx_ring.virt_buffer[j])
+ dma_free_coherent(NULL,
+ RIO_MSG_BUFFER_SIZE,
+ msg_tx_ring.
+ virt_buffer[j],
+ msg_tx_ring.
+ phys_buffer[j]);
+ goto out;
+ }
+ }
+
+ /* Initialize outbound message descriptor ring */
+ if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ msg_tx_ring.size *
+ RIO_MSG_DESC_SIZE,
+ &msg_tx_ring.phys,
+ GFP_KERNEL))) {
+ rc = -ENOMEM;
+ goto out_dma;
+ }
+ memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+ msg_tx_ring.tx_slot = 0;
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
+ out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+
+ /* Configure for snooping */
+ out_be32((void *)&msg_regs->osar, 0x00000004);
+
+ /* Clear interrupt status */
+ out_be32((void *)&msg_regs->osr, 0x000000b3);
+
+ /* Hook up outbound message handler */
+ if ((rc =
+ request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+ "msg_tx", (void *)mport)) < 0)
+ goto out_irq;
+
+ /*
+ * Configure outbound message unit
+ * Snooping
+ * Interrupts (all enabled, except QEIE)
+ * Chaining mode
+ * Disable
+ */
+ out_be32((void *)&msg_regs->omr, 0x00100220);
+
+ /* Set number of entries */
+ out_be32((void *)&msg_regs->omr,
+ in_be32((void *)&msg_regs->omr) |
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+
+ out:
+ return rc;
+
+ out_irq:
+ dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ msg_tx_ring.virt, msg_tx_ring.phys);
+
+ out_dma:
+ for (i = 0; i < msg_tx_ring.size; i++)
+ dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ msg_tx_ring.virt_buffer[i],
+ msg_tx_ring.phys_buffer[i]);
+
+ return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+ /* Disable inbound message unit */
+ out_be32((void *)&msg_regs->omr, 0);
+
+ /* Free ring */
+ dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ msg_tx_ring.virt, msg_tx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+}
+
+/**
+ * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurrence.
+ */
+static irqreturn_t
+mpc85xx_rio_rx_handler(int irq, void *dev_instance)
+{
+ int isr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+ isr = in_be32((void *)&msg_regs->isr);
+
+ if (isr & RIO_MSG_ISR_TE) {
+ pr_info("RIO: inbound message reception error\n");
+ out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (isr & RIO_MSG_ISR_DIQI) {
+ /*
+ * We implement *only* mailbox 0, but can receive messages
+ * for any mailbox/letter to that mailbox destination. So,
+ * make the callback with an unknown/invalid mailbox number
+ * argument.
+ */
+ port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+
+ /* Ack the queueing interrupt */
+ out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+ int i, rc = 0;
+
+ if ((entries < RIO_MIN_RX_RING_SIZE) ||
+ (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+ rc = -EINVAL;
+ goto out;
+ }
+
+ /* Initialize client buffer ring */
+ msg_rx_ring.dev_id = dev_id;
+ msg_rx_ring.size = entries;
+ msg_rx_ring.rx_slot = 0;
+ for (i = 0; i < msg_rx_ring.size; i++)
+ msg_rx_ring.virt_buffer[i] = NULL;
+
+ /* Initialize inbound message ring */
+ if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ msg_rx_ring.size *
+ RIO_MAX_MSG_SIZE,
+ &msg_rx_ring.phys,
+ GFP_KERNEL))) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
+ out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32((void *)&msg_regs->isr, 0x00000091);
+
+ /* Hook up inbound message handler */
+ if ((rc =
+ request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+ "msg_rx", (void *)mport)) < 0) {
+ dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ msg_tx_ring.virt_buffer[i],
+ msg_tx_ring.phys_buffer[i]);
+ goto out;
+ }
+
+ /*
+ * Configure inbound message unit:
+ * Snooping
+ * 4KB max message size
+ * Unmask all interrupt sources
+ * Disable
+ */
+ out_be32((void *)&msg_regs->imr, 0x001b0060);
+
+ /* Set number of queue entries */
+ out_be32((void *)&msg_regs->imr,
+ in_be32((void *)&msg_regs->imr) |
+ ((get_bitmask_order(entries) - 2) << 12));
+
+ /* Now enable the unit */
+ out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+
+ out:
+ return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+ /* Disable inbound message unit */
+ out_be32((void *)&msg_regs->imr, 0);
+
+ /* Free ring */
+ dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ msg_rx_ring.virt, msg_rx_ring.phys);
+
+ /* Free interrupt */
+ free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+ int rc = 0;
+
+ pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+ msg_rx_ring.rx_slot);
+
+ if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+ printk(KERN_ERR
+ "RIO: error adding inbound buffer %d, buffer exists\n",
+ msg_rx_ring.rx_slot);
+ rc = -EINVAL;
+ goto out;
+ }
+
+ msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
+ if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
+ msg_rx_ring.rx_slot = 0;
+
+ out:
+ return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+ u32 imr;
+ u32 phys_buf, virt_buf;
+ void *buf = NULL;
+ int buf_idx;
+
+ phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+
+ /* If no more messages, then bail out */
+ if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+ goto out2;
+
+ virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
+ buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+ buf = msg_rx_ring.virt_buffer[buf_idx];
+
+ if (!buf) {
+ printk(KERN_ERR
+ "RIO: inbound message copy failed, no buffers\n");
+ goto out1;
+ }
+
+ /* Copy max message size, caller is expected to allocate that big */
+ memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+ /* Clear the available buffer */
+ msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+ out1:
+ imr = in_be32((void *)&msg_regs->imr);
+ out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+
+ out2:
+ return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
+{
+ int dsr;
+ struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+ dsr = in_be32((void *)&msg_regs->dsr);
+
+ if (dsr & DOORBELL_DSR_TE) {
+ pr_info("RIO: doorbell reception error\n");
+ out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+ goto out;
+ }
+
+ if (dsr & DOORBELL_DSR_QFI) {
+ pr_info("RIO: doorbell queue full\n");
+ out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+ goto out;
+ }
+
+ /* XXX Need to check/dispatch until queue empty */
+ if (dsr & DOORBELL_DSR_DIQI) {
+ u32 dmsg =
+ (u32) dbell_ring.virt +
+ (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
+ u32 dmr;
+ struct rio_dbell *dbell;
+ int found = 0;
+
+ pr_debug
+ ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+ list_for_each_entry(dbell, &port->dbells, node) {
+ if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+ (dbell->res->end >= DBELL_INF(dmsg))) {
+ found = 1;
+ break;
+ }
+ }
+ if (found) {
+ dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+ DBELL_INF(dmsg));
+ } else {
+ pr_debug
+ ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+ DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+ }
+ dmr = in_be32((void *)&msg_regs->dmr);
+ out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
+ out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+/**
+ * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+{
+ int rc = 0;
+
+ /* Map outbound doorbell window immediately after maintenance window */
+ if (!(dbell_win =
+ (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+ RIO_DBELL_WIN_SIZE))) {
+ printk(KERN_ERR
+ "RIO: unable to map outbound doorbell window\n");
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Initialize inbound doorbells */
+ if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+ 512 * DOORBELL_MESSAGE_SIZE,
+ &dbell_ring.phys,
+ GFP_KERNEL))) {
+ printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+ rc = -ENOMEM;
+ iounmap((void *)dbell_win);
+ goto out;
+ }
+
+ /* Point dequeue/enqueue pointers at first entry in ring */
+ out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
+ out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+
+ /* Clear interrupt status */
+ out_be32((void *)&msg_regs->dsr, 0x00000091);
+
+ /* Hook up doorbell handler */
+ if ((rc =
+ request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+ "dbell_rx", (void *)mport) < 0)) {
+ iounmap((void *)dbell_win);
+ dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+ dbell_ring.virt, dbell_ring.phys);
+ printk(KERN_ERR
+ "MPC85xx RIO: unable to request inbound doorbell irq");
+ goto out;
+ }
+
+ /* Configure doorbells for snooping, 512 entries, and enable */
+ out_be32((void *)&msg_regs->dmr, 0x00108161);
+
+ out:
+ return rc;
+}
+
+static char *cmdline = NULL;
+
+static int mpc85xx_rio_get_hdid(int index)
+{
+ /* XXX Need to parse multiple entries in some format */
+ if (!cmdline)
+ return -1;
+
+ return simple_strtol(cmdline, NULL, 0);
+}
+
+static int mpc85xx_rio_get_cmdline(char *s)
+{
+ if (!s)
+ return 0;
+
+ cmdline = s;
+ return 1;
+}
+
+__setup("riohdid=", mpc85xx_rio_get_cmdline);
+
+/**
+ * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * @law_start: Starting physical address of RapidIO LAW
+ * @law_size: Size of RapidIO LAW
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+void mpc85xx_rio_setup(int law_start, int law_size)
+{
+ struct rio_ops *ops;
+ struct rio_mport *port;
+
+ ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+ ops->lcread = mpc85xx_local_config_read;
+ ops->lcwrite = mpc85xx_local_config_write;
+ ops->cread = mpc85xx_rio_config_read;
+ ops->cwrite = mpc85xx_rio_config_write;
+ ops->dsend = mpc85xx_rio_doorbell_send;
+
+ port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+ port->id = 0;
+ port->index = 0;
+ INIT_LIST_HEAD(&port->dbells);
+ port->iores.start = law_start;
+ port->iores.end = law_start + law_size;
+ port->iores.flags = IORESOURCE_MEM;
+
+ rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+ rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+ rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+ strcpy(port->name, "RIO0 mport");
+
+ port->ops = ops;
+ port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+
+ rio_register_mport(port);
+
+ regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+ atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
+ maint_atmu_regs = atmu_regs + 1;
+ dbell_atmu_regs = atmu_regs + 2;
+ msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+
+ /* Configure maintenance transaction window */
+ out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
+ out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+
+ maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+ /* Configure outbound doorbell window */
+ out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
+ out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
+ mpc85xx_rio_doorbell_init(port);
+}
--- /dev/null
+/*
+ * MPC85xx RapidIO definitions
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
+#define __PPC_SYSLIB_PPC85XX_RIO_H
+
+#include <linux/init.h>
+
+extern void mpc85xx_rio_setup(int law_start, int law_size);
+
+#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */
ppc_htab.o
obj-$(CONFIG_MODULES) += ppc_ksyms.o
obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_RAPIDIO) += rio.o
obj-$(CONFIG_KGDB) += ppc-stub.o
obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+++ /dev/null
-/*
- * RapidIO PPC32 support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/rio.h>
-
-#include <asm/rio.h>
-
-/**
- * platform_rio_init - Do platform specific RIO init
- *
- * Any platform specific initialization of RapdIO
- * hardware is done here as well as registration
- * of any active master ports in the system.
- */
-void __attribute__ ((weak))
- platform_rio_init(void)
-{
- printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
-}
-
-/**
- * ppc_rio_init - Do PPC32 RIO init
- *
- * Calls platform-specific RIO init code and then calls
- * rio_init_mports() to initialize any master ports that
- * have been registered with the RIO subsystem.
- */
-static int __init ppc_rio_init(void)
-{
- printk(KERN_INFO "RIO: RapidIO init\n");
-
- /* Platform specific initialization */
- platform_rio_init();
-
- /* Enumerate all registered ports */
- rio_init_mports();
-
- return 0;
-}
-
-subsys_initcall(ppc_rio_init);
#include <mm/mmu_decl.h>
-#include <syslib/ppc85xx_rio.h>
-
#include <platforms/85xx/mpc85xx_ads_common.h>
#ifndef CONFIG_PCI
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
void platform_rio_init(void)
{
/* 512MB RIO LAW at 0xc0000000 */
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_rio.h>
unsigned char __res[sizeof(bd_t)];
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
void
platform_rio_init(void)
{
#include <syslib/ppc85xx_setup.h>
#include <syslib/cpm2_pic.h>
#include <syslib/ppc85xx_common.h>
-#include <syslib/ppc85xx_rio.h>
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
#endif /* CONFIG_PCI */
#ifdef CONFIG_RAPIDIO
+extern void mpc85xx_rio_setup(int law_start, int law_size);
void platform_rio_init(void)
{
/* 512MB RIO LAW at 0xc0000000 */
ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += pci_auto.o
endif
-obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o
obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \
mpc83xx_sys.o mpc83xx_devices.o ipic.o
ifeq ($(CONFIG_83xx),y)
+++ /dev/null
-/*
- * MPC85xx RapidIO support
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-#include <linux/rio.h>
-#include <linux/rio_drv.h>
-
-#include <asm/io.h>
-
-#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
-#define RIO_ATMU_REGS_OFFSET 0x10c00
-#define RIO_MSG_REGS_OFFSET 0x11000
-#define RIO_MAINT_WIN_SIZE 0x400000
-#define RIO_DBELL_WIN_SIZE 0x1000
-
-#define RIO_MSG_OMR_MUI 0x00000002
-#define RIO_MSG_OSR_TE 0x00000080
-#define RIO_MSG_OSR_QOI 0x00000020
-#define RIO_MSG_OSR_QFI 0x00000010
-#define RIO_MSG_OSR_MUB 0x00000004
-#define RIO_MSG_OSR_EOMI 0x00000002
-#define RIO_MSG_OSR_QEI 0x00000001
-
-#define RIO_MSG_IMR_MI 0x00000002
-#define RIO_MSG_ISR_TE 0x00000080
-#define RIO_MSG_ISR_QFI 0x00000010
-#define RIO_MSG_ISR_DIQI 0x00000001
-
-#define RIO_MSG_DESC_SIZE 32
-#define RIO_MSG_BUFFER_SIZE 4096
-#define RIO_MIN_TX_RING_SIZE 2
-#define RIO_MAX_TX_RING_SIZE 2048
-#define RIO_MIN_RX_RING_SIZE 2
-#define RIO_MAX_RX_RING_SIZE 2048
-
-#define DOORBELL_DMR_DI 0x00000002
-#define DOORBELL_DSR_TE 0x00000080
-#define DOORBELL_DSR_QFI 0x00000010
-#define DOORBELL_DSR_DIQI 0x00000001
-#define DOORBELL_TID_OFFSET 0x03
-#define DOORBELL_SID_OFFSET 0x05
-#define DOORBELL_INFO_OFFSET 0x06
-
-#define DOORBELL_MESSAGE_SIZE 0x08
-#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET))
-#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET))
-#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
-
-struct rio_atmu_regs {
- u32 rowtar;
- u32 pad1;
- u32 rowbar;
- u32 pad2;
- u32 rowar;
- u32 pad3[3];
-};
-
-struct rio_msg_regs {
- u32 omr;
- u32 osr;
- u32 pad1;
- u32 odqdpar;
- u32 pad2;
- u32 osar;
- u32 odpr;
- u32 odatr;
- u32 odcr;
- u32 pad3;
- u32 odqepar;
- u32 pad4[13];
- u32 imr;
- u32 isr;
- u32 pad5;
- u32 ifqdpar;
- u32 pad6;
- u32 ifqepar;
- u32 pad7[250];
- u32 dmr;
- u32 dsr;
- u32 pad8;
- u32 dqdpar;
- u32 pad9;
- u32 dqepar;
- u32 pad10[26];
- u32 pwmr;
- u32 pwsr;
- u32 pad11;
- u32 pwqbar;
-};
-
-struct rio_tx_desc {
- u32 res1;
- u32 saddr;
- u32 dport;
- u32 dattr;
- u32 res2;
- u32 res3;
- u32 dwcnt;
- u32 res4;
-};
-
-static u32 regs_win;
-static struct rio_atmu_regs *atmu_regs;
-static struct rio_atmu_regs *maint_atmu_regs;
-static struct rio_atmu_regs *dbell_atmu_regs;
-static u32 dbell_win;
-static u32 maint_win;
-static struct rio_msg_regs *msg_regs;
-
-static struct rio_dbell_ring {
- void *virt;
- dma_addr_t phys;
-} dbell_ring;
-
-static struct rio_msg_tx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_TX_RING_SIZE];
- dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
- int tx_slot;
- int size;
- void *dev_id;
-} msg_tx_ring;
-
-static struct rio_msg_rx_ring {
- void *virt;
- dma_addr_t phys;
- void *virt_buffer[RIO_MAX_RX_RING_SIZE];
- int rx_slot;
- int size;
- void *dev_id;
-} msg_rx_ring;
-
-/**
- * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
- * @index: ID of RapidIO interface
- * @destid: Destination ID of target device
- * @data: 16-bit info field of RapidIO doorbell message
- *
- * Sends a MPC85xx doorbell message. Returns %0 on success or
- * %-EINVAL on failure.
- */
-static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
-{
- pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
- index, destid, data);
- out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
- out_be16((void *)(dbell_win), data);
-
- return 0;
-}
-
-/**
- * mpc85xx_local_config_read - Generate a MPC85xx local config space read
- * @index: ID of RapdiIO interface
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @data: Value to be read into
- *
- * Generates a MPC85xx local configuration space read. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
-{
- pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
- offset);
- *data = in_be32((void *)(regs_win + offset));
-
- return 0;
-}
-
-/**
- * mpc85xx_local_config_write - Generate a MPC85xx local config space write
- * @index: ID of RapdiIO interface
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @data: Value to be written
- *
- * Generates a MPC85xx local configuration space write. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
-{
- pr_debug
- ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
- index, offset, data);
- out_be32((void *)(regs_win + offset), data);
-
- return 0;
-}
-
-/**
- * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
- * @index: ID of RapdiIO interface
- * @destid: Destination ID of transaction
- * @hopcount: Number of hops to target device
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @val: Location to be read into
- *
- * Generates a MPC85xx read maintenance transaction. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int
-mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
- u32 * val)
-{
- u8 *data;
-
- pr_debug
- ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
- index, destid, hopcount, offset, len);
- out_be32((void *)&maint_atmu_regs->rowtar,
- (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
-
- data = (u8 *) maint_win + offset;
- switch (len) {
- case 1:
- *val = in_8((u8 *) data);
- break;
- case 2:
- *val = in_be16((u16 *) data);
- break;
- default:
- *val = in_be32((u32 *) data);
- break;
- }
-
- return 0;
-}
-
-/**
- * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
- * @index: ID of RapdiIO interface
- * @destid: Destination ID of transaction
- * @hopcount: Number of hops to target device
- * @offset: Offset into configuration space
- * @len: Length (in bytes) of the maintenance transaction
- * @val: Value to be written
- *
- * Generates an MPC85xx write maintenance transaction. Returns %0 on
- * success or %-EINVAL on failure.
- */
-static int
-mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
- int len, u32 val)
-{
- u8 *data;
- pr_debug
- ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
- index, destid, hopcount, offset, len, val);
- out_be32((void *)&maint_atmu_regs->rowtar,
- (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
-
- data = (u8 *) maint_win + offset;
- switch (len) {
- case 1:
- out_8((u8 *) data, val);
- break;
- case 2:
- out_be16((u16 *) data, val);
- break;
- default:
- out_be32((u32 *) data, val);
- break;
- }
-
- return 0;
-}
-
-/**
- * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
- * @mport: Master port with outbound message queue
- * @rdev: Target of outbound message
- * @mbox: Outbound mailbox
- * @buffer: Message to add to outbound queue
- * @len: Length of message
- *
- * Adds the @buffer message to the MPC85xx outbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-int
-rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
- void *buffer, size_t len)
-{
- u32 omr;
- struct rio_tx_desc *desc =
- (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
- int ret = 0;
-
- pr_debug
- ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
- rdev->destid, mbox, (int)buffer, len);
-
- if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
- ret = -EINVAL;
- goto out;
- }
-
- /* Copy and clear rest of buffer */
- memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
- if (len < (RIO_MAX_MSG_SIZE - 4))
- memset((void *)((u32) msg_tx_ring.
- virt_buffer[msg_tx_ring.tx_slot] + len), 0,
- RIO_MAX_MSG_SIZE - len);
-
- /* Set mbox field for message */
- desc->dport = mbox & 0x3;
-
- /* Enable EOMI interrupt, set priority, and set destid */
- desc->dattr = 0x28000000 | (rdev->destid << 2);
-
- /* Set transfer size aligned to next power of 2 (in double words) */
- desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
-
- /* Set snooping and source buffer address */
- desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
-
- /* Increment enqueue pointer */
- omr = in_be32((void *)&msg_regs->omr);
- out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
-
- /* Go to next descriptor */
- if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
- msg_tx_ring.tx_slot = 0;
-
- out:
- return ret;
-}
-
-EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
-
-/**
- * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles outbound message interrupts. Executes a register outbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-mpc85xx_rio_tx_handler(int irq, void *dev_instance)
-{
- int osr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
-
- osr = in_be32((void *)&msg_regs->osr);
-
- if (osr & RIO_MSG_OSR_TE) {
- pr_info("RIO: outbound message transmission error\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_QOI) {
- pr_info("RIO: outbound message queue overflow\n");
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
- goto out;
- }
-
- if (osr & RIO_MSG_OSR_EOMI) {
- u32 dqp = in_be32((void *)&msg_regs->odqdpar);
- int slot = (dqp - msg_tx_ring.phys) >> 5;
- port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
-
- /* Ack the end-of-message interrupt */
- out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the outbound mailbox ring
- *
- * Initializes buffer ring, request the outbound message interrupt,
- * and enables the outbound message unit. Returns %0 on success and
- * %-EINVAL or %-ENOMEM on failure.
- */
-int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, j, rc = 0;
-
- if ((entries < RIO_MIN_TX_RING_SIZE) ||
- (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize shadow copy ring */
- msg_tx_ring.dev_id = dev_id;
- msg_tx_ring.size = entries;
-
- for (i = 0; i < msg_tx_ring.size; i++) {
- if (!
- (msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- &msg_tx_ring.phys_buffer[i],
- GFP_KERNEL))) {
- rc = -ENOMEM;
- for (j = 0; j < msg_tx_ring.size; j++)
- if (msg_tx_ring.virt_buffer[j])
- dma_free_coherent(NULL,
- RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.
- virt_buffer[j],
- msg_tx_ring.
- phys_buffer[j]);
- goto out;
- }
- }
-
- /* Initialize outbound message descriptor ring */
- if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
- msg_tx_ring.size *
- RIO_MSG_DESC_SIZE,
- &msg_tx_ring.phys,
- GFP_KERNEL))) {
- rc = -ENOMEM;
- goto out_dma;
- }
- memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
- msg_tx_ring.tx_slot = 0;
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
- out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
-
- /* Configure for snooping */
- out_be32((void *)&msg_regs->osar, 0x00000004);
-
- /* Clear interrupt status */
- out_be32((void *)&msg_regs->osr, 0x000000b3);
-
- /* Hook up outbound message handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
- "msg_tx", (void *)mport)) < 0)
- goto out_irq;
-
- /*
- * Configure outbound message unit
- * Snooping
- * Interrupts (all enabled, except QEIE)
- * Chaining mode
- * Disable
- */
- out_be32((void *)&msg_regs->omr, 0x00100220);
-
- /* Set number of entries */
- out_be32((void *)&msg_regs->omr,
- in_be32((void *)&msg_regs->omr) |
- ((get_bitmask_order(entries) - 2) << 12));
-
- /* Now enable the unit */
- out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
-
- out:
- return rc;
-
- out_irq:
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
-
- out_dma:
- for (i = 0; i < msg_tx_ring.size; i++)
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
-
- return rc;
-}
-
-/**
- * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
- * @mport: Master port implementing the outbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the outbound message unit, free all buffers, and
- * frees the outbound message interrupt.
- */
-void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
-{
- /* Disable inbound message unit */
- out_be32((void *)&msg_regs->omr, 0);
-
- /* Free ring */
- dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
- msg_tx_ring.virt, msg_tx_ring.phys);
-
- /* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
-}
-
-/**
- * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles inbound message interrupts. Executes a registered inbound
- * mailbox event handler and acks the interrupt occurrence.
- */
-static irqreturn_t
-mpc85xx_rio_rx_handler(int irq, void *dev_instance)
-{
- int isr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
-
- isr = in_be32((void *)&msg_regs->isr);
-
- if (isr & RIO_MSG_ISR_TE) {
- pr_info("RIO: inbound message reception error\n");
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
- goto out;
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (isr & RIO_MSG_ISR_DIQI) {
- /*
- * We implement *only* mailbox 0, but can receive messages
- * for any mailbox/letter to that mailbox destination. So,
- * make the callback with an unknown/invalid mailbox number
- * argument.
- */
- port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
-
- /* Ack the queueing interrupt */
- out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @dev_id: Device specific pointer to pass on event
- * @mbox: Mailbox to open
- * @entries: Number of entries in the inbound mailbox ring
- *
- * Initializes buffer ring, request the inbound message interrupt,
- * and enables the inbound message unit. Returns %0 on success
- * and %-EINVAL or %-ENOMEM on failure.
- */
-int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
-{
- int i, rc = 0;
-
- if ((entries < RIO_MIN_RX_RING_SIZE) ||
- (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
- rc = -EINVAL;
- goto out;
- }
-
- /* Initialize client buffer ring */
- msg_rx_ring.dev_id = dev_id;
- msg_rx_ring.size = entries;
- msg_rx_ring.rx_slot = 0;
- for (i = 0; i < msg_rx_ring.size; i++)
- msg_rx_ring.virt_buffer[i] = NULL;
-
- /* Initialize inbound message ring */
- if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
- msg_rx_ring.size *
- RIO_MAX_MSG_SIZE,
- &msg_rx_ring.phys,
- GFP_KERNEL))) {
- rc = -ENOMEM;
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
- out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
-
- /* Clear interrupt status */
- out_be32((void *)&msg_regs->isr, 0x00000091);
-
- /* Hook up inbound message handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
- "msg_rx", (void *)mport)) < 0) {
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
- msg_tx_ring.virt_buffer[i],
- msg_tx_ring.phys_buffer[i]);
- goto out;
- }
-
- /*
- * Configure inbound message unit:
- * Snooping
- * 4KB max message size
- * Unmask all interrupt sources
- * Disable
- */
- out_be32((void *)&msg_regs->imr, 0x001b0060);
-
- /* Set number of queue entries */
- out_be32((void *)&msg_regs->imr,
- in_be32((void *)&msg_regs->imr) |
- ((get_bitmask_order(entries) - 2) << 12));
-
- /* Now enable the unit */
- out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
-
- out:
- return rc;
-}
-
-/**
- * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
- * @mport: Master port implementing the inbound message unit
- * @mbox: Mailbox to close
- *
- * Disables the inbound message unit, free all buffers, and
- * frees the inbound message interrupt.
- */
-void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
-{
- /* Disable inbound message unit */
- out_be32((void *)&msg_regs->imr, 0);
-
- /* Free ring */
- dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
- msg_rx_ring.virt, msg_rx_ring.phys);
-
- /* Free interrupt */
- free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
-}
-
-/**
- * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- * @buf: Buffer to add to inbound queue
- *
- * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
- * %0 on success or %-EINVAL on failure.
- */
-int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
-{
- int rc = 0;
-
- pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
- msg_rx_ring.rx_slot);
-
- if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
- printk(KERN_ERR
- "RIO: error adding inbound buffer %d, buffer exists\n",
- msg_rx_ring.rx_slot);
- rc = -EINVAL;
- goto out;
- }
-
- msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
- if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
- msg_rx_ring.rx_slot = 0;
-
- out:
- return rc;
-}
-
-EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
-
-/**
- * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
- * @mport: Master port implementing the inbound message unit
- * @mbox: Inbound mailbox number
- *
- * Gets the next available inbound message from the inbound message queue.
- * A pointer to the message is returned on success or NULL on failure.
- */
-void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
-{
- u32 imr;
- u32 phys_buf, virt_buf;
- void *buf = NULL;
- int buf_idx;
-
- phys_buf = in_be32((void *)&msg_regs->ifqdpar);
-
- /* If no more messages, then bail out */
- if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
- goto out2;
-
- virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
- buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
- buf = msg_rx_ring.virt_buffer[buf_idx];
-
- if (!buf) {
- printk(KERN_ERR
- "RIO: inbound message copy failed, no buffers\n");
- goto out1;
- }
-
- /* Copy max message size, caller is expected to allocate that big */
- memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
-
- /* Clear the available buffer */
- msg_rx_ring.virt_buffer[buf_idx] = NULL;
-
- out1:
- imr = in_be32((void *)&msg_regs->imr);
- out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
-
- out2:
- return buf;
-}
-
-EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
-
-/**
- * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
- * @irq: Linux interrupt number
- * @dev_instance: Pointer to interrupt-specific data
- *
- * Handles doorbell interrupts. Parses a list of registered
- * doorbell event handlers and executes a matching event handler.
- */
-static irqreturn_t
-mpc85xx_rio_dbell_handler(int irq, void *dev_instance)
-{
- int dsr;
- struct rio_mport *port = (struct rio_mport *)dev_instance;
-
- dsr = in_be32((void *)&msg_regs->dsr);
-
- if (dsr & DOORBELL_DSR_TE) {
- pr_info("RIO: doorbell reception error\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
- goto out;
- }
-
- if (dsr & DOORBELL_DSR_QFI) {
- pr_info("RIO: doorbell queue full\n");
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
- goto out;
- }
-
- /* XXX Need to check/dispatch until queue empty */
- if (dsr & DOORBELL_DSR_DIQI) {
- u32 dmsg =
- (u32) dbell_ring.virt +
- (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
- u32 dmr;
- struct rio_dbell *dbell;
- int found = 0;
-
- pr_debug
- ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
-
- list_for_each_entry(dbell, &port->dbells, node) {
- if ((dbell->res->start <= DBELL_INF(dmsg)) &&
- (dbell->res->end >= DBELL_INF(dmsg))) {
- found = 1;
- break;
- }
- }
- if (found) {
- dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
- DBELL_INF(dmsg));
- } else {
- pr_debug
- ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
- DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
- }
- dmr = in_be32((void *)&msg_regs->dmr);
- out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
- out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
- }
-
- out:
- return IRQ_HANDLED;
-}
-
-/**
- * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
- * @mport: Master port implementing the inbound doorbell unit
- *
- * Initializes doorbell unit hardware and inbound DMA buffer
- * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
- * or %-ENOMEM on failure.
- */
-static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
-{
- int rc = 0;
-
- /* Map outbound doorbell window immediately after maintenance window */
- if (!(dbell_win =
- (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
- RIO_DBELL_WIN_SIZE))) {
- printk(KERN_ERR
- "RIO: unable to map outbound doorbell window\n");
- rc = -ENOMEM;
- goto out;
- }
-
- /* Initialize inbound doorbells */
- if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
- 512 * DOORBELL_MESSAGE_SIZE,
- &dbell_ring.phys,
- GFP_KERNEL))) {
- printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
- rc = -ENOMEM;
- iounmap((void *)dbell_win);
- goto out;
- }
-
- /* Point dequeue/enqueue pointers at first entry in ring */
- out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
- out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
-
- /* Clear interrupt status */
- out_be32((void *)&msg_regs->dsr, 0x00000091);
-
- /* Hook up doorbell handler */
- if ((rc =
- request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
- "dbell_rx", (void *)mport) < 0)) {
- iounmap((void *)dbell_win);
- dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
- dbell_ring.virt, dbell_ring.phys);
- printk(KERN_ERR
- "MPC85xx RIO: unable to request inbound doorbell irq");
- goto out;
- }
-
- /* Configure doorbells for snooping, 512 entries, and enable */
- out_be32((void *)&msg_regs->dmr, 0x00108161);
-
- out:
- return rc;
-}
-
-static char *cmdline = NULL;
-
-static int mpc85xx_rio_get_hdid(int index)
-{
- /* XXX Need to parse multiple entries in some format */
- if (!cmdline)
- return -1;
-
- return simple_strtol(cmdline, NULL, 0);
-}
-
-static int mpc85xx_rio_get_cmdline(char *s)
-{
- if (!s)
- return 0;
-
- cmdline = s;
- return 1;
-}
-
-__setup("riohdid=", mpc85xx_rio_get_cmdline);
-
-/**
- * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
- * @law_start: Starting physical address of RapidIO LAW
- * @law_size: Size of RapidIO LAW
- *
- * Initializes MPC85xx RapidIO hardware interface, configures
- * master port with system-specific info, and registers the
- * master port with the RapidIO subsystem.
- */
-void mpc85xx_rio_setup(int law_start, int law_size)
-{
- struct rio_ops *ops;
- struct rio_mport *port;
-
- ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
- ops->lcread = mpc85xx_local_config_read;
- ops->lcwrite = mpc85xx_local_config_write;
- ops->cread = mpc85xx_rio_config_read;
- ops->cwrite = mpc85xx_rio_config_write;
- ops->dsend = mpc85xx_rio_doorbell_send;
-
- port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
- port->id = 0;
- port->index = 0;
- INIT_LIST_HEAD(&port->dbells);
- port->iores.start = law_start;
- port->iores.end = law_start + law_size;
- port->iores.flags = IORESOURCE_MEM;
-
- rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
- rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
- rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
- strcpy(port->name, "RIO0 mport");
-
- port->ops = ops;
- port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
-
- rio_register_mport(port);
-
- regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
- atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
- maint_atmu_regs = atmu_regs + 1;
- dbell_atmu_regs = atmu_regs + 2;
- msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
-
- /* Configure maintenance transaction window */
- out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
- out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
-
- maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
-
- /* Configure outbound doorbell window */
- out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
- out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
- mpc85xx_rio_doorbell_init(port);
-}
+++ /dev/null
-/*
- * MPC85xx RapidIO definitions
- *
- * Copyright 2005 MontaVista Software, Inc.
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
-#define __PPC_SYSLIB_PPC85XX_RIO_H
-
-#include <linux/init.h>
-
-extern void mpc85xx_rio_setup(int law_start, int law_size);
-
-#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */
projects / openwrt / staging / blogic.git / commitdiff