--- /dev/null
+/* This file is released into the public domain */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-soc";
+ model = "Netgear EX3700";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_g {
+ label = "ex3700:green:power";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_a {
+ label = "ex3700:amber:power";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ router_g {
+ label = "ex3700:green:router";
+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ };
+
+ router_r {
+ label = "ex3700:red:router";
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ };
+
+ device_g {
+ label = "ex3700:green:device";
+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ };
+
+ device_r {
+ label = "ex3700:red:device";
+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ex3700:green:wps";
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "board_data";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0 >;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "rgmii2", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
projects / openwrt / staging / nbd.git / commitdiff