LIB = $(obj)lib$(BOARD).a
COBJS-y := $(BOARD).o
-COBJS-${CONFIG_FSL_DIU_FB} += ads5121_diu.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_diu_fb.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../freescale/common/fsl_logo_bmp.o
-COBJS-$(CONFIG_PCI) += pci.o
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
int misc_init_r(void)
{
u8 tmp_val;
- extern int ads5121_diu_init(void);
+ extern int mpc5121_diu_init(void);
/* Using this for DIU init before the driver in linux takes over
* Enable the TFP410 Encoder (I2C address 0x38)
#ifdef CONFIG_FSL_DIU_FB
#if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
- ads5121_diu_init();
+ mpc5121_diu_init();
#endif
#endif
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
}
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
-
-void init_ide_reset (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- debug ("init_ide_reset\n");
-
- /*
- * Clear the reset bit to reset the interface
- * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
- */
- immr->pata.pata_ata_control = 0;
- udelay(100);
- /* Assert the reset bit to enable the interface */
- immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
- udelay(100);
-
-}
-
-void ide_set_reset (int idereset)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- debug ("ide_set_reset(%d)\n", idereset);
-
- if (idereset) {
- immr->pata.pata_ata_control = 0;
- udelay(100);
- } else {
- immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
- udelay(100);
- }
-}
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-int ide_preinit (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long t;
- const struct {
- short t0;
- short t1;
- short t2_8;
- short t2_16;
- short t2i;
- short t4;
- short t9;
- short tA;
- } pio_specs = {
- .t0 = 600,
- .t1 = 70,
- .t2_8 = 290,
- .t2_16 = 165,
- .t2i = 0,
- .t4 = 30,
- .t9 = 20,
- .tA = 50,
- };
- union {
- u32 config;
- struct {
- u8 field1;
- u8 field2;
- u8 field3;
- u8 field4;
- }bytes;
- }cfg;
-
- debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
- (u32)&immr->pata);
-
- /* Set the reset bit to 1 to enable the interface */
- immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
-
- /* Init timings : we use PIO mode 0 timings */
- t = 1000000000 / gd->ips_clk; /* period in ns */
- cfg.bytes.field1 = 3;
- cfg.bytes.field2 = 3;
- cfg.bytes.field3 = (pio_specs.t1 + t) / t;
- cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
-
- immr->pata.pata_time1 = cfg.config;
-
- cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
- cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
- cfg.bytes.field3 = 1;
- cfg.bytes.field4 = (pio_specs.t4 + t) / t;
-
- immr->pata.pata_time2 = cfg.config;
-
- cfg.config = immr->pata.pata_time3;
- cfg.bytes.field1 = (pio_specs.t9 + t) / t;
-
- immr->pata.pata_time3 = cfg.config;
- debug ("PATA preinit complete.\n");
-
- return 0;
-}
-
-#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */
+++ /dev/null
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- * York Sun <yorksun@freescale.com>
- *
- * FSL DIU Framebuffer driver
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_FSL_DIU_FB
-
-#include "../freescale/common/pixis.h"
-#include "../freescale/common/fsl_diu_fb.h"
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-#include <devices.h>
-#include <video_fb.h>
-#endif
-
-#ifdef CONFIG_FSL_DIU_LOGO_BMP
-extern unsigned int FSL_Logo_BMP[];
-#else
-#define FSL_Logo_BMP NULL
-#endif
-
-static int xres, yres;
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile clk512x_t *clk = &immap->clk;
- volatile unsigned int *clkdvdr = &clk->scfr[0];
- unsigned long speed_ccb, temp, pixval;
-
- speed_ccb = get_bus_freq(0) * 4;
- temp = 1000000000/pixclock;
- temp *= 1000;
- pixval = speed_ccb / temp;
- debug("DIU pixval = %lu\n", pixval);
-
- /* Modify PXCLK in GUTS CLKDVDR */
- debug("DIU: Current value of CLKDVDR = 0x%08x\n", *clkdvdr);
- temp = *clkdvdr & 0xFFFFFF00;
- *clkdvdr = temp | (pixval & 0xFF);
- debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *clkdvdr);
-}
-
-char *valid_bmp(char *addr)
-{
- unsigned long h_addr;
-
- h_addr = simple_strtoul(addr, NULL, 16);
- if (h_addr < CONFIG_SYS_FLASH_BASE ||
- h_addr >= (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - 1)) {
- printf("bmp addr %lx is not a valid flash address\n", h_addr);
- return 0;
- } else if ((*(char *)(h_addr) != 'B') || (*(char *)(h_addr+1) != 'M')) {
- printf("bmp addr is not a bmp\n");
- return 0;
- } else
- return (char *)h_addr;
-}
-
-int ads5121_diu_init(void)
-{
- unsigned int pixel_format;
- char *bmp = NULL;
- char *bmp_env;
-
- xres = 1024;
- yres = 768;
- pixel_format = 0x88883316;
-
- debug("ads5121_diu_init\n");
- bmp_env = getenv("diu_bmp_addr");
- if (bmp_env) {
- bmp = valid_bmp(bmp_env);
- }
- if (!bmp)
- bmp = FSL_Logo_BMP;
- return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
-}
-
-int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
- int flag, int argc, char *argv[])
-{
- unsigned int addr;
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return 1;
- }
-
- if (!strncmp(argv[1], "init", 4)) {
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
- fsl_diu_clear_screen();
- drv_video_init();
-#else
- return ads5121_diu_init();
-#endif
- } else {
- addr = simple_strtoul(argv[1], NULL, 16);
- fsl_diu_clear_screen();
- fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
- }
-
- return 0;
-}
-
-U_BOOT_CMD(
- diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
- "Init or Display BMP file",
- "init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'"
- );
-
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-
-/*
- * The Graphic Device
- */
-GraphicDevice ctfb;
-void *video_hw_init(void)
-{
- GraphicDevice *pGD = (GraphicDevice *) &ctfb;
- struct fb_info *info;
-
- if (ads5121_diu_init() < 0)
- return;
-
- /* fill in Graphic device struct */
- sprintf(pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz",
- xres, yres, 32, 64, 60);
-
- pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
- pGD->winSizeX = xres;
- pGD->winSizeY = yres - info->logo_height;
- pGD->plnSizeX = pGD->winSizeX;
- pGD->plnSizeY = pGD->winSizeY;
-
- pGD->gdfBytesPP = 4;
- pGD->gdfIndex = GDF_32BIT_X888RGB;
-
- pGD->isaBase = 0;
- pGD->pciBase = 0;
- pGD->memSize = info->screen_size - info->logo_size;
-
- /* Cursor Start Address */
- pGD->dprBase = 0;
- pGD->vprBase = 0;
- pGD->cprBase = 0;
-
- return (void *)pGD;
-}
-
-/**
- * Set the LUT
- *
- * @index: color number
- * @r: red
- * @b: blue
- * @g: green
- */
-void video_set_lut
- (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
-{
- return;
-}
-
-#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
-
-#endif /* CONFIG_FSL_DIU_FB */
+++ /dev/null
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. All rights reserved.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/mmu.h>
-#include <asm/global_data.h>
-#include <pci.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-
-static struct pci_controller pci_hose;
-
-
-/**************************************************************************
- * pci_init_board()
- *
- */
-void
-pci_init_board(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile law512x_t *pci_law;
- volatile pot512x_t *pci_pot;
- volatile pcictrl512x_t *pci_ctrl;
- volatile pciconf512x_t *pci_conf;
- u16 reg16;
- u32 reg32;
- u32 dev;
- struct pci_controller *hose;
-
- /* Set PCI divider for 33MHz */
- reg32 = immr->clk.scfr[0];
- reg32 &= ~(SCFR1_PCI_DIV_MASK);
- reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
- immr->clk.scfr[0] = reg32;
-
- pci_law = immr->sysconf.pcilaw;
- pci_pot = immr->ios.pot;
- pci_ctrl = &immr->pci_ctrl;
- pci_conf = &immr->pci_conf;
-
- hose = &pci_hose;
-
- /*
- * Release PCI RST Output signal
- */
- pci_ctrl->gcr = 0;
- udelay(2000);
- pci_ctrl->gcr = 1;
-
- /* We need to wait at least a 1sec based on PCI specs */
- {
- int i;
-
- for (i = 0; i < 1000; i++)
- udelay(1000);
- }
-
- /*
- * Configure PCI Local Access Windows
- */
- pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
- pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
-
- pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
- pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
-
- /*
- * Configure PCI Outbound Translation Windows
- */
-
- /* PCI mem space - prefetch */
- pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M;
-
- /* PCI IO space */
- pci_pot[1].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[1].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
-
- /* PCI mmio - non-prefetch mem space */
- pci_pot[2].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
- pci_pot[2].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
- pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
-
- /*
- * Configure PCI Inbound Translation Windows
- */
-
- /* we need RAM mapped to PCI space for the devices to
- * access main memory */
- pci_ctrl[0].pitar1 = 0x0;
- pci_ctrl[0].pibar1 = 0x0;
- pci_ctrl[0].piebar1 = 0x0;
- pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
- PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI_MEM_BASE,
- CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE,
- PCI_REGION_MEM|PCI_REGION_PREFETCH);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI_MMIO_BASE,
- CONFIG_SYS_PCI_MMIO_PHYS,
- CONFIG_SYS_PCI_MMIO_SIZE,
- PCI_REGION_MEM);
-
- /* PCI IO space */
- pci_set_region(hose->regions + 2,
- CONFIG_SYS_PCI_IO_BASE,
- CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* System memory space */
- pci_set_region(hose->regions + 3,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 4;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR + 0x8300),
- (CONFIG_SYS_IMMR + 0x8304));
-
- pci_register_hose(hose);
-
- /*
- * Write to Command register
- */
- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int tmp[2];
- const char *path;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
- path = fdt_getprop(blob, nodeoffset, "pci", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose.first_busno);
- tmp[1] = cpu_to_be32(pci_hose.last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
- }
-}
-#endif /* CONFIG_OF_LIBFDT */
+++ /dev/null
-/*
- * (C) Copyright 2007 DENX Software Engineering.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc512x/start.o (.text)
- *(.text)
- *(.fixup)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
-ENTRY(_start)
include $(TOPDIR)/config.mk
+$(shell mkdir -p $(OBJTREE)/board/freescale/common)
+
LIB = $(obj)lib$(CPU).a
START = start.o
COBJS-y := traps.o cpu.o cpu_init.o speed.o interrupts.o serial.o i2c.o iopin.o
+COBJS-${CONFIG_FSL_DIU_FB} += diu.o
+COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_diu_fb.o
+COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_logo_bmp.o
+COBJS-${CONFIG_CMD_IDE} += ide.o
COBJS-${CONFIG_IIM} += iim.o
+COBJS-$(CONFIG_PCI) += pci.o
COBJS := $(COBJS-y)
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
#
-# (C) Copyright 2007 DENX Software Engineering
+# (C) Copyright 2007-2009 DENX Software Engineering
#
# See file CREDITS for list of people who contributed to this
# project.
PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
-ffixed-r2 -msoft-float -mcpu=603e
+
+# Use default linker script.
+# A board port can override this setting in board/*/config.mk
+LDSCRIPT := $(SRCTREE)/cpu/mpc512x/u-boot.lds
--- /dev/null
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ * York Sun <yorksun@freescale.com>
+ *
+ * FSL DIU Framebuffer driver
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+
+#include "../../board/freescale/common/pixis.h"
+#include "../../board/freescale/common/fsl_diu_fb.h"
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+#include <devices.h>
+#include <video_fb.h>
+#endif
+
+#ifdef CONFIG_FSL_DIU_LOGO_BMP
+extern unsigned int FSL_Logo_BMP[];
+#else
+#define FSL_Logo_BMP NULL
+#endif
+
+static int xres, yres;
+
+void diu_set_pixel_clock(unsigned int pixclock)
+{
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
+ volatile clk512x_t *clk = &immap->clk;
+ volatile unsigned int *clkdvdr = &clk->scfr[0];
+ unsigned long speed_ccb, temp, pixval;
+
+ speed_ccb = get_bus_freq(0) * 4;
+ temp = 1000000000/pixclock;
+ temp *= 1000;
+ pixval = speed_ccb / temp;
+ debug("DIU pixval = %lu\n", pixval);
+
+ /* Modify PXCLK in GUTS CLKDVDR */
+ debug("DIU: Current value of CLKDVDR = 0x%08x\n", *clkdvdr);
+ temp = *clkdvdr & 0xFFFFFF00;
+ *clkdvdr = temp | (pixval & 0xFF);
+ debug("DIU: Modified value of CLKDVDR = 0x%08x\n", *clkdvdr);
+}
+
+char *valid_bmp(char *addr)
+{
+ unsigned long h_addr;
+
+ h_addr = simple_strtoul(addr, NULL, 16);
+ if (h_addr < CONFIG_SYS_FLASH_BASE ||
+ h_addr >= (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - 1)) {
+ printf("bmp addr %lx is not a valid flash address\n", h_addr);
+ return 0;
+ } else if ((*(char *)(h_addr) != 'B') || (*(char *)(h_addr+1) != 'M')) {
+ printf("bmp addr is not a bmp\n");
+ return 0;
+ } else
+ return (char *)h_addr;
+}
+
+int mpc5121_diu_init(void)
+{
+ unsigned int pixel_format;
+ char *bmp = NULL;
+ char *bmp_env;
+
+ xres = 1024;
+ yres = 768;
+ pixel_format = 0x88883316;
+
+ debug("mpc5121_diu_init\n");
+ bmp_env = getenv("diu_bmp_addr");
+ if (bmp_env) {
+ bmp = valid_bmp(bmp_env);
+ }
+ if (!bmp)
+ bmp = FSL_Logo_BMP;
+ return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
+}
+
+int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
+ int flag, int argc, char *argv[])
+{
+ unsigned int addr;
+
+ if (argc < 2) {
+ cmd_usage(cmdtp);
+ return 1;
+ }
+
+ if (!strncmp(argv[1], "init", 4)) {
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+ fsl_diu_clear_screen();
+ drv_video_init();
+#else
+ return mpc5121_diu_init();
+#endif
+ } else {
+ addr = simple_strtoul(argv[1], NULL, 16);
+ fsl_diu_clear_screen();
+ fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ diufb, CONFIG_SYS_MAXARGS, 1, mpc5121diu_init_show_bmp,
+ "Init or Display BMP file",
+ "init\n - initialize DIU\n"
+ "addr\n - display bmp at address 'addr'"
+ );
+
+
+#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
+
+/*
+ * The Graphic Device
+ */
+GraphicDevice ctfb;
+void *video_hw_init(void)
+{
+ GraphicDevice *pGD = (GraphicDevice *) &ctfb;
+ struct fb_info *info;
+
+ if (mpc5121_diu_init() < 0)
+ return;
+
+ /* fill in Graphic device struct */
+ sprintf(pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz",
+ xres, yres, 32, 64, 60);
+
+ pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
+ pGD->winSizeX = xres;
+ pGD->winSizeY = yres - info->logo_height;
+ pGD->plnSizeX = pGD->winSizeX;
+ pGD->plnSizeY = pGD->winSizeY;
+
+ pGD->gdfBytesPP = 4;
+ pGD->gdfIndex = GDF_32BIT_X888RGB;
+
+ pGD->isaBase = 0;
+ pGD->pciBase = 0;
+ pGD->memSize = info->screen_size - info->logo_size;
+
+ /* Cursor Start Address */
+ pGD->dprBase = 0;
+ pGD->vprBase = 0;
+ pGD->cprBase = 0;
+
+ return (void *)pGD;
+}
+
+/**
+ * Set the LUT
+ *
+ * @index: color number
+ * @r: red
+ * @b: blue
+ * @g: green
+ */
+void video_set_lut
+ (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
+{
+ return;
+}
+
+#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
--- /dev/null
+/*
+ * (C) Copyright 2007-2009 DENX Software Engineering
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_IDE_RESET)
+
+void init_ide_reset (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ debug ("init_ide_reset\n");
+
+ /*
+ * Clear the reset bit to reset the interface
+ * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
+ */
+ immr->pata.pata_ata_control = 0;
+ udelay(100);
+ /* Assert the reset bit to enable the interface */
+ immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+ udelay(100);
+}
+
+void ide_set_reset (int idereset)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ debug ("ide_set_reset(%d)\n", idereset);
+
+ if (idereset) {
+ immr->pata.pata_ata_control = 0;
+ udelay(100);
+ } else {
+ immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+ udelay(100);
+ }
+}
+
+#define CALC_TIMING(t) (t + period - 1) / period
+
+int ide_preinit (void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ long t;
+ const struct {
+ short t0;
+ short t1;
+ short t2_8;
+ short t2_16;
+ short t2i;
+ short t4;
+ short t9;
+ short tA;
+ } pio_specs = {
+ .t0 = 600,
+ .t1 = 70,
+ .t2_8 = 290,
+ .t2_16 = 165,
+ .t2i = 0,
+ .t4 = 30,
+ .t9 = 20,
+ .tA = 50,
+ };
+ union {
+ u32 config;
+ struct {
+ u8 field1;
+ u8 field2;
+ u8 field3;
+ u8 field4;
+ }bytes;
+ }cfg;
+
+ debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
+ (u32)&immr->pata);
+
+ /* Set the reset bit to 1 to enable the interface */
+ immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B;
+
+ /* Init timings : we use PIO mode 0 timings */
+ t = 1000000000 / gd->ips_clk; /* period in ns */
+ cfg.bytes.field1 = 3;
+ cfg.bytes.field2 = 3;
+ cfg.bytes.field3 = (pio_specs.t1 + t) / t;
+ cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
+
+ immr->pata.pata_time1 = cfg.config;
+
+ cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
+ cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
+ cfg.bytes.field3 = 1;
+ cfg.bytes.field4 = (pio_specs.t4 + t) / t;
+
+ immr->pata.pata_time2 = cfg.config;
+
+ cfg.config = immr->pata.pata_time3;
+ cfg.bytes.field1 = (pio_specs.t9 + t) / t;
+
+ immr->pata.pata_time3 = cfg.config;
+ debug ("PATA preinit complete.\n");
+
+ return 0;
+}
+
+#endif /* defined(CONFIG_IDE_RESET) */
--- /dev/null
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#include <asm/mmu.h>
+#include <asm/global_data.h>
+#include <pci.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
+
+static struct pci_controller pci_hose;
+
+
+/**************************************************************************
+ * pci_init_board()
+ *
+ */
+void
+pci_init_board(void)
+{
+ volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+ volatile law512x_t *pci_law;
+ volatile pot512x_t *pci_pot;
+ volatile pcictrl512x_t *pci_ctrl;
+ volatile pciconf512x_t *pci_conf;
+ u16 reg16;
+ u32 reg32;
+ u32 dev;
+ struct pci_controller *hose;
+
+ /* Set PCI divider for 33MHz */
+ reg32 = immr->clk.scfr[0];
+ reg32 &= ~(SCFR1_PCI_DIV_MASK);
+ reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
+ immr->clk.scfr[0] = reg32;
+
+ pci_law = immr->sysconf.pcilaw;
+ pci_pot = immr->ios.pot;
+ pci_ctrl = &immr->pci_ctrl;
+ pci_conf = &immr->pci_conf;
+
+ hose = &pci_hose;
+
+ /*
+ * Release PCI RST Output signal
+ */
+ pci_ctrl->gcr = 0;
+ udelay(2000);
+ pci_ctrl->gcr = 1;
+
+ /* We need to wait at least a 1sec based on PCI specs */
+ {
+ int i;
+
+ for (i = 0; i < 1000; i++)
+ udelay(1000);
+ }
+
+ /*
+ * Configure PCI Local Access Windows
+ */
+ pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M;
+
+ pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M;
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+
+ /* PCI mem space - prefetch */
+ pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M;
+
+ /* PCI IO space */
+ pci_pot[1].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[1].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;
+
+ /* PCI mmio - non-prefetch mem space */
+ pci_pot[2].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK;
+ pci_pot[2].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK;
+ pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
+ pci_ctrl[0].pitar1 = 0x0;
+ pci_ctrl[0].pibar1 = 0x0;
+ pci_ctrl[0].piebar1 = 0x0;
+ pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
+ PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);
+
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* PCI memory prefetch space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_SYS_PCI_MEM_BASE,
+ CONFIG_SYS_PCI_MEM_PHYS,
+ CONFIG_SYS_PCI_MEM_SIZE,
+ PCI_REGION_MEM|PCI_REGION_PREFETCH);
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_SYS_PCI_MMIO_BASE,
+ CONFIG_SYS_PCI_MMIO_PHYS,
+ CONFIG_SYS_PCI_MMIO_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 2,
+ CONFIG_SYS_PCI_IO_BASE,
+ CONFIG_SYS_PCI_IO_PHYS,
+ CONFIG_SYS_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ /* System memory space */
+ pci_set_region(hose->regions + 3,
+ CONFIG_PCI_SYS_MEM_BUS,
+ CONFIG_PCI_SYS_MEM_PHYS,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 4;
+
+ pci_setup_indirect(hose,
+ (CONFIG_SYS_IMMR + 0x8300),
+ (CONFIG_SYS_IMMR + 0x8304));
+
+ pci_register_hose(hose);
+
+ /*
+ * Write to Command register
+ */
+ reg16 = 0xff;
+ dev = PCI_BDF(hose->first_busno, 0, 0);
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+ pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+
+#ifdef CONFIG_PCI_SCAN_SHOW
+ printf("PCI: Bus Dev VenId DevId Class Int\n");
+#endif
+ /*
+ * Hose scan.
+ */
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
+{
+ int nodeoffset;
+ int tmp[2];
+ const char *path;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+ path = fdt_getprop(blob, nodeoffset, "pci", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose.first_busno);
+ tmp[1] = cpu_to_be32(pci_hose.last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+ }
+}
+#endif /* CONFIG_OF_LIBFDT */
--- /dev/null
+/*
+ * (C) Copyright 2007 DENX Software Engineering.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc512x/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+ENTRY(_start)
projects / project / bcm63xx / u-boot.git / commitdiff