--- /dev/null
+/*
+ * SMSC LAN9[12]1[567] Network driver
+ *
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer <at> pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DRIVER_SMC911X
+
+#include <command.h>
+#include <net.h>
+#include <miiphy.h>
+
+#define mdelay(n) udelay((n)*1000)
+
+#define __REG(x) (*((volatile u32 *)(x)))
+
+/* Below are the register offsets and bit definitions
+ * of the Lan911x memory space
+ */
+#define RX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x00)
+
+#define TX_DATA_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x20)
+#define TX_CMD_A_INT_ON_COMP (0x80000000)
+#define TX_CMD_A_INT_BUF_END_ALGN (0x03000000)
+#define TX_CMD_A_INT_4_BYTE_ALGN (0x00000000)
+#define TX_CMD_A_INT_16_BYTE_ALGN (0x01000000)
+#define TX_CMD_A_INT_32_BYTE_ALGN (0x02000000)
+#define TX_CMD_A_INT_DATA_OFFSET (0x001F0000)
+#define TX_CMD_A_INT_FIRST_SEG (0x00002000)
+#define TX_CMD_A_INT_LAST_SEG (0x00001000)
+#define TX_CMD_A_BUF_SIZE (0x000007FF)
+#define TX_CMD_B_PKT_TAG (0xFFFF0000)
+#define TX_CMD_B_ADD_CRC_DISABLE (0x00002000)
+#define TX_CMD_B_DISABLE_PADDING (0x00001000)
+#define TX_CMD_B_PKT_BYTE_LENGTH (0x000007FF)
+
+#define RX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x40)
+#define RX_STS_PKT_LEN (0x3FFF0000)
+#define RX_STS_ES (0x00008000)
+#define RX_STS_BCST (0x00002000)
+#define RX_STS_LEN_ERR (0x00001000)
+#define RX_STS_RUNT_ERR (0x00000800)
+#define RX_STS_MCAST (0x00000400)
+#define RX_STS_TOO_LONG (0x00000080)
+#define RX_STS_COLL (0x00000040)
+#define RX_STS_ETH_TYPE (0x00000020)
+#define RX_STS_WDOG_TMT (0x00000010)
+#define RX_STS_MII_ERR (0x00000008)
+#define RX_STS_DRIBBLING (0x00000004)
+#define RX_STS_CRC_ERR (0x00000002)
+#define RX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x44)
+#define TX_STATUS_FIFO __REG(CONFIG_DRIVER_SMC911X_BASE + 0x48)
+#define TX_STS_TAG (0xFFFF0000)
+#define TX_STS_ES (0x00008000)
+#define TX_STS_LOC (0x00000800)
+#define TX_STS_NO_CARR (0x00000400)
+#define TX_STS_LATE_COLL (0x00000200)
+#define TX_STS_MANY_COLL (0x00000100)
+#define TX_STS_COLL_CNT (0x00000078)
+#define TX_STS_MANY_DEFER (0x00000004)
+#define TX_STS_UNDERRUN (0x00000002)
+#define TX_STS_DEFERRED (0x00000001)
+#define TX_STATUS_FIFO_PEEK __REG(CONFIG_DRIVER_SMC911X_BASE + 0x4C)
+#define ID_REV __REG(CONFIG_DRIVER_SMC911X_BASE + 0x50)
+#define ID_REV_CHIP_ID (0xFFFF0000) /* RO */
+#define ID_REV_REV_ID (0x0000FFFF) /* RO */
+
+#define INT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x54)
+#define INT_CFG_INT_DEAS (0xFF000000) /* R/W */
+#define INT_CFG_INT_DEAS_CLR (0x00004000)
+#define INT_CFG_INT_DEAS_STS (0x00002000)
+#define INT_CFG_IRQ_INT (0x00001000) /* RO */
+#define INT_CFG_IRQ_EN (0x00000100) /* R/W */
+#define INT_CFG_IRQ_POL (0x00000010) /* R/W Not Affected by SW Reset */
+#define INT_CFG_IRQ_TYPE (0x00000001) /* R/W Not Affected by SW Reset */
+
+#define INT_STS __REG(CONFIG_DRIVER_SMC911X_BASE + 0x58)
+#define INT_STS_SW_INT (0x80000000) /* R/WC */
+#define INT_STS_TXSTOP_INT (0x02000000) /* R/WC */
+#define INT_STS_RXSTOP_INT (0x01000000) /* R/WC */
+#define INT_STS_RXDFH_INT (0x00800000) /* R/WC */
+#define INT_STS_RXDF_INT (0x00400000) /* R/WC */
+#define INT_STS_TX_IOC (0x00200000) /* R/WC */
+#define INT_STS_RXD_INT (0x00100000) /* R/WC */
+#define INT_STS_GPT_INT (0x00080000) /* R/WC */
+#define INT_STS_PHY_INT (0x00040000) /* RO */
+#define INT_STS_PME_INT (0x00020000) /* R/WC */
+#define INT_STS_TXSO (0x00010000) /* R/WC */
+#define INT_STS_RWT (0x00008000) /* R/WC */
+#define INT_STS_RXE (0x00004000) /* R/WC */
+#define INT_STS_TXE (0x00002000) /* R/WC */
+/*#define INT_STS_ERX (0x00001000)*/ /* R/WC */
+#define INT_STS_TDFU (0x00000800) /* R/WC */
+#define INT_STS_TDFO (0x00000400) /* R/WC */
+#define INT_STS_TDFA (0x00000200) /* R/WC */
+#define INT_STS_TSFF (0x00000100) /* R/WC */
+#define INT_STS_TSFL (0x00000080) /* R/WC */
+/*#define INT_STS_RXDF (0x00000040)*/ /* R/WC */
+#define INT_STS_RDFO (0x00000040) /* R/WC */
+#define INT_STS_RDFL (0x00000020) /* R/WC */
+#define INT_STS_RSFF (0x00000010) /* R/WC */
+#define INT_STS_RSFL (0x00000008) /* R/WC */
+#define INT_STS_GPIO2_INT (0x00000004) /* R/WC */
+#define INT_STS_GPIO1_INT (0x00000002) /* R/WC */
+#define INT_STS_GPIO0_INT (0x00000001) /* R/WC */
+#define INT_EN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x5C)
+#define INT_EN_SW_INT_EN (0x80000000) /* R/W */
+#define INT_EN_TXSTOP_INT_EN (0x02000000) /* R/W */
+#define INT_EN_RXSTOP_INT_EN (0x01000000) /* R/W */
+#define INT_EN_RXDFH_INT_EN (0x00800000) /* R/W */
+/*#define INT_EN_RXDF_INT_EN (0x00400000)*/ /* R/W */
+#define INT_EN_TIOC_INT_EN (0x00200000) /* R/W */
+#define INT_EN_RXD_INT_EN (0x00100000) /* R/W */
+#define INT_EN_GPT_INT_EN (0x00080000) /* R/W */
+#define INT_EN_PHY_INT_EN (0x00040000) /* R/W */
+#define INT_EN_PME_INT_EN (0x00020000) /* R/W */
+#define INT_EN_TXSO_EN (0x00010000) /* R/W */
+#define INT_EN_RWT_EN (0x00008000) /* R/W */
+#define INT_EN_RXE_EN (0x00004000) /* R/W */
+#define INT_EN_TXE_EN (0x00002000) /* R/W */
+/*#define INT_EN_ERX_EN (0x00001000)*/ /* R/W */
+#define INT_EN_TDFU_EN (0x00000800) /* R/W */
+#define INT_EN_TDFO_EN (0x00000400) /* R/W */
+#define INT_EN_TDFA_EN (0x00000200) /* R/W */
+#define INT_EN_TSFF_EN (0x00000100) /* R/W */
+#define INT_EN_TSFL_EN (0x00000080) /* R/W */
+/*#define INT_EN_RXDF_EN (0x00000040)*/ /* R/W */
+#define INT_EN_RDFO_EN (0x00000040) /* R/W */
+#define INT_EN_RDFL_EN (0x00000020) /* R/W */
+#define INT_EN_RSFF_EN (0x00000010) /* R/W */
+#define INT_EN_RSFL_EN (0x00000008) /* R/W */
+#define INT_EN_GPIO2_INT (0x00000004) /* R/W */
+#define INT_EN_GPIO1_INT (0x00000002) /* R/W */
+#define INT_EN_GPIO0_INT (0x00000001) /* R/W */
+
+#define BYTE_TEST __REG(CONFIG_DRIVER_SMC911X_BASE + 0x64)
+#define FIFO_INT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x68)
+#define FIFO_INT_TX_AVAIL_LEVEL (0xFF000000) /* R/W */
+#define FIFO_INT_TX_STS_LEVEL (0x00FF0000) /* R/W */
+#define FIFO_INT_RX_AVAIL_LEVEL (0x0000FF00) /* R/W */
+#define FIFO_INT_RX_STS_LEVEL (0x000000FF) /* R/W */
+
+#define RX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x6C)
+#define RX_CFG_RX_END_ALGN (0xC0000000) /* R/W */
+#define RX_CFG_RX_END_ALGN4 (0x00000000) /* R/W */
+#define RX_CFG_RX_END_ALGN16 (0x40000000) /* R/W */
+#define RX_CFG_RX_END_ALGN32 (0x80000000) /* R/W */
+#define RX_CFG_RX_DMA_CNT (0x0FFF0000) /* R/W */
+#define RX_CFG_RX_DUMP (0x00008000) /* R/W */
+#define RX_CFG_RXDOFF (0x00001F00) /* R/W */
+/*#define RX_CFG_RXBAD (0x00000001)*/ /* R/W */
+
+#define TX_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x70)
+/*#define TX_CFG_TX_DMA_LVL (0xE0000000)*/ /* R/W */
+/*#define TX_CFG_TX_DMA_CNT (0x0FFF0000)*/ /* R/W Self Clearing */
+#define TX_CFG_TXS_DUMP (0x00008000) /* Self Clearing */
+#define TX_CFG_TXD_DUMP (0x00004000) /* Self Clearing */
+#define TX_CFG_TXSAO (0x00000004) /* R/W */
+#define TX_CFG_TX_ON (0x00000002) /* R/W */
+#define TX_CFG_STOP_TX (0x00000001) /* Self Clearing */
+
+#define HW_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x74)
+#define HW_CFG_TTM (0x00200000) /* R/W */
+#define HW_CFG_SF (0x00100000) /* R/W */
+#define HW_CFG_TX_FIF_SZ (0x000F0000) /* R/W */
+#define HW_CFG_TR (0x00003000) /* R/W */
+#define HW_CFG_PHY_CLK_SEL (0x00000060) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_INT_PHY (0x00000000) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_EXT_PHY (0x00000020) /* R/W */
+#define HW_CFG_PHY_CLK_SEL_CLK_DIS (0x00000040) /* R/W */
+#define HW_CFG_SMI_SEL (0x00000010) /* R/W */
+#define HW_CFG_EXT_PHY_DET (0x00000008) /* RO */
+#define HW_CFG_EXT_PHY_EN (0x00000004) /* R/W */
+#define HW_CFG_32_16_BIT_MODE (0x00000004) /* RO */
+#define HW_CFG_SRST_TO (0x00000002) /* RO */
+#define HW_CFG_SRST (0x00000001) /* Self Clearing */
+
+#define RX_DP_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x78)
+#define RX_DP_CTRL_RX_FFWD (0x80000000) /* R/W */
+#define RX_DP_CTRL_FFWD_BUSY (0x80000000) /* RO */
+
+#define RX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x7C)
+#define RX_FIFO_INF_RXSUSED (0x00FF0000) /* RO */
+#define RX_FIFO_INF_RXDUSED (0x0000FFFF) /* RO */
+
+#define TX_FIFO_INF __REG(CONFIG_DRIVER_SMC911X_BASE + 0x80)
+#define TX_FIFO_INF_TSUSED (0x00FF0000) /* RO */
+#define TX_FIFO_INF_TDFREE (0x0000FFFF) /* RO */
+
+#define PMT_CTRL __REG(CONFIG_DRIVER_SMC911X_BASE + 0x84)
+#define PMT_CTRL_PM_MODE (0x00003000) /* Self Clearing */
+#define PMT_CTRL_PHY_RST (0x00000400) /* Self Clearing */
+#define PMT_CTRL_WOL_EN (0x00000200) /* R/W */
+#define PMT_CTRL_ED_EN (0x00000100) /* R/W */
+#define PMT_CTRL_PME_TYPE (0x00000040) /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_WUPS (0x00000030) /* R/WC */
+#define PMT_CTRL_WUPS_NOWAKE (0x00000000) /* R/WC */
+#define PMT_CTRL_WUPS_ED (0x00000010) /* R/WC */
+#define PMT_CTRL_WUPS_WOL (0x00000020) /* R/WC */
+#define PMT_CTRL_WUPS_MULTI (0x00000030) /* R/WC */
+#define PMT_CTRL_PME_IND (0x00000008) /* R/W */
+#define PMT_CTRL_PME_POL (0x00000004) /* R/W */
+#define PMT_CTRL_PME_EN (0x00000002) /* R/W Not Affected by SW Reset */
+#define PMT_CTRL_READY (0x00000001) /* RO */
+
+#define GPIO_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x88)
+#define GPIO_CFG_LED3_EN (0x40000000) /* R/W */
+#define GPIO_CFG_LED2_EN (0x20000000) /* R/W */
+#define GPIO_CFG_LED1_EN (0x10000000) /* R/W */
+#define GPIO_CFG_GPIO2_INT_POL (0x04000000) /* R/W */
+#define GPIO_CFG_GPIO1_INT_POL (0x02000000) /* R/W */
+#define GPIO_CFG_GPIO0_INT_POL (0x01000000) /* R/W */
+#define GPIO_CFG_EEPR_EN (0x00700000) /* R/W */
+#define GPIO_CFG_GPIOBUF2 (0x00040000) /* R/W */
+#define GPIO_CFG_GPIOBUF1 (0x00020000) /* R/W */
+#define GPIO_CFG_GPIOBUF0 (0x00010000) /* R/W */
+#define GPIO_CFG_GPIODIR2 (0x00000400) /* R/W */
+#define GPIO_CFG_GPIODIR1 (0x00000200) /* R/W */
+#define GPIO_CFG_GPIODIR0 (0x00000100) /* R/W */
+#define GPIO_CFG_GPIOD4 (0x00000010) /* R/W */
+#define GPIO_CFG_GPIOD3 (0x00000008) /* R/W */
+#define GPIO_CFG_GPIOD2 (0x00000004) /* R/W */
+#define GPIO_CFG_GPIOD1 (0x00000002) /* R/W */
+#define GPIO_CFG_GPIOD0 (0x00000001) /* R/W */
+
+#define GPT_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0x8C)
+#define GPT_CFG_TIMER_EN (0x20000000) /* R/W */
+#define GPT_CFG_GPT_LOAD (0x0000FFFF) /* R/W */
+
+#define GPT_CNT __REG(CONFIG_DRIVER_SMC911X_BASE + 0x90)
+#define GPT_CNT_GPT_CNT (0x0000FFFF) /* RO */
+
+#define ENDIAN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x98)
+#define FREE_RUN __REG(CONFIG_DRIVER_SMC911X_BASE + 0x9C)
+#define RX_DROP __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA0)
+#define MAC_CSR_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA4)
+#define MAC_CSR_CMD_CSR_BUSY (0x80000000) /* Self Clearing */
+#define MAC_CSR_CMD_R_NOT_W (0x40000000) /* R/W */
+#define MAC_CSR_CMD_CSR_ADDR (0x000000FF) /* R/W */
+
+#define MAC_CSR_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xA8)
+#define AFC_CFG __REG(CONFIG_DRIVER_SMC911X_BASE + 0xAC)
+#define AFC_CFG_AFC_HI (0x00FF0000) /* R/W */
+#define AFC_CFG_AFC_LO (0x0000FF00) /* R/W */
+#define AFC_CFG_BACK_DUR (0x000000F0) /* R/W */
+#define AFC_CFG_FCMULT (0x00000008) /* R/W */
+#define AFC_CFG_FCBRD (0x00000004) /* R/W */
+#define AFC_CFG_FCADD (0x00000002) /* R/W */
+#define AFC_CFG_FCANY (0x00000001) /* R/W */
+
+#define E2P_CMD __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB0)
+#define E2P_CMD_EPC_BUSY (0x80000000) /* Self Clearing */
+#define E2P_CMD_EPC_CMD (0x70000000) /* R/W */
+#define E2P_CMD_EPC_CMD_READ (0x00000000) /* R/W */
+#define E2P_CMD_EPC_CMD_EWDS (0x10000000) /* R/W */
+#define E2P_CMD_EPC_CMD_EWEN (0x20000000) /* R/W */
+#define E2P_CMD_EPC_CMD_WRITE (0x30000000) /* R/W */
+#define E2P_CMD_EPC_CMD_WRAL (0x40000000) /* R/W */
+#define E2P_CMD_EPC_CMD_ERASE (0x50000000) /* R/W */
+#define E2P_CMD_EPC_CMD_ERAL (0x60000000) /* R/W */
+#define E2P_CMD_EPC_CMD_RELOAD (0x70000000) /* R/W */
+#define E2P_CMD_EPC_TIMEOUT (0x00000200) /* RO */
+#define E2P_CMD_MAC_ADDR_LOADED (0x00000100) /* RO */
+#define E2P_CMD_EPC_ADDR (0x000000FF) /* R/W */
+
+#define E2P_DATA __REG(CONFIG_DRIVER_SMC911X_BASE + 0xB4)
+#define E2P_DATA_EEPROM_DATA (0x000000FF) /* R/W */
+/* end of LAN register offsets and bit definitions */
+
+/* MAC Control and Status registers */
+#define MAC_CR (0x01) /* R/W */
+
+/* MAC_CR - MAC Control Register */
+#define MAC_CR_RXALL (0x80000000)
+/* TODO: delete this bit? It is not described in the data sheet. */
+#define MAC_CR_HBDIS (0x10000000)
+#define MAC_CR_RCVOWN (0x00800000)
+#define MAC_CR_LOOPBK (0x00200000)
+#define MAC_CR_FDPX (0x00100000)
+#define MAC_CR_MCPAS (0x00080000)
+#define MAC_CR_PRMS (0x00040000)
+#define MAC_CR_INVFILT (0x00020000)
+#define MAC_CR_PASSBAD (0x00010000)
+#define MAC_CR_HFILT (0x00008000)
+#define MAC_CR_HPFILT (0x00002000)
+#define MAC_CR_LCOLL (0x00001000)
+#define MAC_CR_BCAST (0x00000800)
+#define MAC_CR_DISRTY (0x00000400)
+#define MAC_CR_PADSTR (0x00000100)
+#define MAC_CR_BOLMT_MASK (0x000000C0)
+#define MAC_CR_DFCHK (0x00000020)
+#define MAC_CR_TXEN (0x00000008)
+#define MAC_CR_RXEN (0x00000004)
+
+#define ADDRH (0x02) /* R/W mask 0x0000FFFFUL */
+#define ADDRL (0x03) /* R/W mask 0xFFFFFFFFUL */
+#define HASHH (0x04) /* R/W */
+#define HASHL (0x05) /* R/W */
+
+#define MII_ACC (0x06) /* R/W */
+#define MII_ACC_PHY_ADDR (0x0000F800)
+#define MII_ACC_MIIRINDA (0x000007C0)
+#define MII_ACC_MII_WRITE (0x00000002)
+#define MII_ACC_MII_BUSY (0x00000001)
+
+#define MII_DATA (0x07) /* R/W mask 0x0000FFFFUL */
+
+#define FLOW (0x08) /* R/W */
+#define FLOW_FCPT (0xFFFF0000)
+#define FLOW_FCPASS (0x00000004)
+#define FLOW_FCEN (0x00000002)
+#define FLOW_FCBSY (0x00000001)
+
+#define VLAN1 (0x09) /* R/W mask 0x0000FFFFUL */
+#define VLAN1_VTI1 (0x0000ffff)
+
+#define VLAN2 (0x0A) /* R/W mask 0x0000FFFFUL */
+#define VLAN2_VTI2 (0x0000ffff)
+
+#define WUFF (0x0B) /* WO */
+
+#define WUCSR (0x0C) /* R/W */
+#define WUCSR_GUE (0x00000200)
+#define WUCSR_WUFR (0x00000040)
+#define WUCSR_MPR (0x00000020)
+#define WUCSR_WAKE_EN (0x00000004)
+#define WUCSR_MPEN (0x00000002)
+
+/* Chip ID values */
+#define CHIP_9115 0x115
+#define CHIP_9116 0x116
+#define CHIP_9117 0x117
+#define CHIP_9118 0x118
+#define CHIP_9215 0x115a
+#define CHIP_9216 0x116a
+#define CHIP_9217 0x117a
+#define CHIP_9218 0x118a
+
+struct chip_id {
+ u16 id;
+ char *name;
+};
+
+static const struct chip_id chip_ids[] = {
+ { CHIP_9115, "LAN9115" },
+ { CHIP_9116, "LAN9116" },
+ { CHIP_9117, "LAN9117" },
+ { CHIP_9118, "LAN9118" },
+ { CHIP_9215, "LAN9215" },
+ { CHIP_9216, "LAN9216" },
+ { CHIP_9217, "LAN9217" },
+ { CHIP_9218, "LAN9218" },
+ { 0, NULL },
+};
+
+#define DRIVERNAME "smc911x"
+
+u32 smc911x_get_mac_csr(u8 reg)
+{
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+ MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | MAC_CSR_CMD_R_NOT_W | reg;
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+
+ return MAC_CSR_DATA;
+}
+
+void smc911x_set_mac_csr(u8 reg, u32 data)
+{
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+ MAC_CSR_DATA = data;
+ MAC_CSR_CMD = MAC_CSR_CMD_CSR_BUSY | reg;
+ while (MAC_CSR_CMD & MAC_CSR_CMD_CSR_BUSY);
+}
+
+static int smx911x_handle_mac_address(bd_t *bd)
+{
+ unsigned long addrh, addrl;
+ unsigned char *m = bd->bi_enetaddr;
+
+ /* if the environment has a valid mac address then use it */
+ if ((m[0] | m[1] | m[2] | m[3] | m[4] | m[5])) {
+ addrl = m[0] | m[1] << 8 | m[2] << 16 | m[3] << 24;
+ addrh = m[4] | m[5] << 8;
+ smc911x_set_mac_csr(ADDRH, addrh);
+ smc911x_set_mac_csr(ADDRL, addrl);
+ } else {
+ /* if not, try to get one from the eeprom */
+ addrh = smc911x_get_mac_csr(ADDRH);
+ addrl = smc911x_get_mac_csr(ADDRL);
+
+ m[0] = (addrl ) & 0xff;
+ m[1] = (addrl >> 8 ) & 0xff;
+ m[2] = (addrl >> 16 ) & 0xff;
+ m[3] = (addrl >> 24 ) & 0xff;
+ m[4] = (addrh ) & 0xff;
+ m[5] = (addrh >> 8 ) & 0xff;
+
+ /* we get 0xff when there is no eeprom connected */
+ if ((m[0] & m[1] & m[2] & m[3] & m[4] & m[5]) == 0xff) {
+ printf(DRIVERNAME ": no valid mac address in environment "
+ "and no eeprom found\n");
+ return -1;
+ }
+ }
+
+ printf(DRIVERNAME ": MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
+ m[0], m[1], m[2], m[3], m[4], m[5]);
+
+ return 0;
+}
+
+static int smc911x_miiphy_read(u8 phy, u8 reg, u16 *val)
+{
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+ smc911x_set_mac_csr( MII_ACC, phy << 11 | reg << 6 | MII_ACC_MII_BUSY);
+
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+ *val = smc911x_get_mac_csr(MII_DATA);
+
+ return 0;
+}
+
+static int smc911x_miiphy_write(u8 phy, u8 reg, u16 val)
+{
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+
+ smc911x_set_mac_csr(MII_DATA, val);
+ smc911x_set_mac_csr(MII_ACC,
+ phy << 11 | reg << 6 | MII_ACC_MII_BUSY | MII_ACC_MII_WRITE);
+
+ while (smc911x_get_mac_csr(MII_ACC) & MII_ACC_MII_BUSY);
+ return 0;
+}
+
+static int smc911x_phy_reset(void)
+{
+ u32 reg;
+
+ reg = PMT_CTRL;
+ reg &= ~0xfffff030;
+ reg |= PMT_CTRL_PHY_RST;
+ PMT_CTRL = reg;
+
+ mdelay(100);
+
+ return 0;
+}
+
+static void smc911x_phy_configure(void)
+{
+ int timeout;
+ u16 status;
+
+ smc911x_phy_reset();
+
+ smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_RESET);
+ mdelay(1);
+ smc911x_miiphy_write(1, PHY_ANAR, 0x01e1);
+ smc911x_miiphy_write(1, PHY_BMCR, PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
+
+ timeout = 5000;
+ do {
+ mdelay(1);
+ if ((timeout--) == 0)
+ goto err_out;
+
+ if (smc911x_miiphy_read(1, PHY_BMSR, &status) != 0)
+ goto err_out;
+ } while (!(status & PHY_BMSR_LS));
+
+ printf(DRIVERNAME ": phy initialized\n");
+
+ return;
+
+err_out:
+ printf(DRIVERNAME ": autonegotiation timed out\n");
+}
+
+static void smc911x_reset(void)
+{
+ int timeout;
+
+ /* Take out of PM setting first */
+ if (PMT_CTRL & PMT_CTRL_READY) {
+ /* Write to the bytetest will take out of powerdown */
+ BYTE_TEST = 0x0;
+
+ timeout = 10;
+
+ while ( timeout-- && !(PMT_CTRL & PMT_CTRL_READY))
+ udelay(10);
+ if (!timeout) {
+ printf(DRIVERNAME
+ ": timeout waiting for PM restore\n");
+ return;
+ }
+ }
+
+ /* Disable interrupts */
+ INT_EN = 0;
+
+ HW_CFG = HW_CFG_SRST;
+
+ timeout = 1000;
+ while (timeout-- && E2P_CMD & E2P_CMD_EPC_BUSY)
+ udelay(10);
+
+ if(!timeout) {
+ printf(DRIVERNAME ": reset timeout\n");
+ return;
+ }
+
+ /* Reset the FIFO level and flow control settings */
+ smc911x_set_mac_csr(FLOW, FLOW_FCPT | FLOW_FCEN);
+ AFC_CFG = 0x0050287F;
+
+ /* Set to LED outputs */
+ GPIO_CFG = 0x70070000;
+}
+
+static void smc911x_enable(void)
+{
+ /* Enable TX */
+ HW_CFG = 8 << 16 | HW_CFG_SF;
+
+ GPT_CFG = GPT_CFG_TIMER_EN | 10000;
+
+ TX_CFG = TX_CFG_TX_ON;
+
+ /* no padding to start of packets */
+ RX_CFG = 0;
+
+ smc911x_set_mac_csr(MAC_CR, MAC_CR_TXEN | MAC_CR_RXEN | MAC_CR_HBDIS);
+
+}
+
+int eth_init(bd_t *bd)
+{
+ unsigned long val, i;
+
+ printf(DRIVERNAME ": initializing\n");
+
+ val = BYTE_TEST;
+ if(val != 0x87654321) {
+ printf(DRIVERNAME ": Invalid chip endian 0x08%x\n", val);
+ goto err_out;
+ }
+
+ val = ID_REV >> 16;
+ for(i = 0; chip_ids[i].id != 0; i++) {
+ if (chip_ids[i].id == val) break;
+ }
+ if (!chip_ids[i].id) {
+ printf(DRIVERNAME ": Unknown chip ID %04x\n", val);
+ goto err_out;
+ }
+
+ printf(DRIVERNAME ": detected %s controller\n", chip_ids[i].name);
+
+ smc911x_reset();
+
+ /* Configure the PHY, initialize the link state */
+ smc911x_phy_configure();
+
+ if (smx911x_handle_mac_address(bd))
+ goto err_out;
+
+ /* Turn on Tx + Rx */
+ smc911x_enable();
+
+ return 0;
+
+err_out:
+ return -1;
+}
+
+int eth_send(volatile void *packet, int length)
+{
+ u32 *data = (u32*)packet;
+ u32 tmplen;
+ u32 status;
+
+ TX_DATA_FIFO = TX_CMD_A_INT_FIRST_SEG | TX_CMD_A_INT_LAST_SEG | length;
+ TX_DATA_FIFO = length;
+
+ tmplen = (length + 3) / 4;
+
+ while(tmplen--)
+ TX_DATA_FIFO = *data++;
+
+ /* wait for transmission */
+ while (!((TX_FIFO_INF & TX_FIFO_INF_TSUSED) >> 16));
+
+ /* get status. Ignore 'no carrier' error, it has no meaning for
+ * full duplex operation
+ */
+ status = TX_STATUS_FIFO & (TX_STS_LOC | TX_STS_LATE_COLL |
+ TX_STS_MANY_COLL | TX_STS_MANY_DEFER | TX_STS_UNDERRUN);
+
+ if(!status)
+ return 0;
+
+ printf(DRIVERNAME ": failed to send packet: %s%s%s%s%s\n",
+ status & TX_STS_LOC ? "TX_STS_LOC " : "",
+ status & TX_STS_LATE_COLL ? "TX_STS_LATE_COLL " : "",
+ status & TX_STS_MANY_COLL ? "TX_STS_MANY_COLL " : "",
+ status & TX_STS_MANY_DEFER ? "TX_STS_MANY_DEFER " : "",
+ status & TX_STS_UNDERRUN ? "TX_STS_UNDERRUN" : "");
+
+ return -1;
+}
+
+void eth_halt(void)
+{
+ smc911x_reset();
+}
+
+int eth_rx(void)
+{
+ u32 *data = (u32 *)NetRxPackets[0];
+ u32 pktlen, tmplen;
+ u32 status;
+
+ if((RX_FIFO_INF & RX_FIFO_INF_RXSUSED) >> 16) {
+ status = RX_STATUS_FIFO;
+ pktlen = (status & RX_STS_PKT_LEN) >> 16;
+
+ RX_CFG = 0;
+
+ tmplen = (pktlen + 2+ 3) / 4;
+ while(tmplen--)
+ *data++ = RX_DATA_FIFO;
+
+ if(status & RX_STS_ES)
+ printf(DRIVERNAME
+ ": dropped bad packet. Status: 0x%08x\n",
+ status);
+ else
+ NetReceive(NetRxPackets[0], pktlen);
+ }
+
+ return 0;
+}
+
+#endif /* CONFIG_DRIVER_SMC911X */
projects / project / bcm63xx / u-boot.git / commitdiff