kernel: backport two intel igc patches from 5.15

to allow proper initialization of device

- igc: Remove _I_PHY_ID checking
- igc: Remove phy->type checking

Signed-off-by: Pascal Coudurier <coudu@wanadoo.fr>
(refreshed)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

diff --git a/target/linux/generic/backport-5.10/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch b/target/linux/generic/backport-5.10/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch
new file mode 100644 (file)
index 0000000..d7df068
--- /dev/null
+++ b/target/linux/generic/backport-5.10/774-v5.15-1-igc-remove-_I_PHY_ID-checking.patch
@@ -0,0 +1,73 @@
+From 7c496de538eebd8212dc2a3c9a468386b264d0d4 Mon Sep 17 00:00:00 2001
+From: Sasha Neftin <sasha.neftin@intel.com>
+Date: Wed, 7 Jul 2021 08:14:40 +0300
+Subject: igc: Remove _I_PHY_ID checking
+
+i225 devices have only one PHY vendor. There is no point checking
+_I_PHY_ID during the link establishment and auto-negotiation process.
+This patch comes to clean up these pointless checkings.
+
+Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
+Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
+Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
+---
+ drivers/net/ethernet/intel/igc/igc_base.c | 10 +---------
+ drivers/net/ethernet/intel/igc/igc_main.c |  3 +--
+ drivers/net/ethernet/intel/igc/igc_phy.c  |  6 ++----
+ 3 files changed, 4 insertions(+), 15 deletions(-)
+
+(limited to 'drivers/net/ethernet/intel/igc')
+
+--- a/drivers/net/ethernet/intel/igc/igc_base.c
++++ b/drivers/net/ethernet/intel/igc/igc_base.c
+@@ -187,15 +187,7 @@ static s32 igc_init_phy_params_base(stru
+ 
+       igc_check_for_copper_link(hw);
+ 
+-      /* Verify phy id and set remaining function pointers */
+-      switch (phy->id) {
+-      case I225_I_PHY_ID:
+-              phy->type       = igc_phy_i225;
+-              break;
+-      default:
+-              ret_val = -IGC_ERR_PHY;
+-              goto out;
+-      }
++      phy->type = igc_phy_i225;
+ 
+ out:
+       return ret_val;
+--- a/drivers/net/ethernet/intel/igc/igc_main.c
++++ b/drivers/net/ethernet/intel/igc/igc_main.c
+@@ -4189,8 +4189,7 @@ bool igc_has_link(struct igc_adapter *ad
+               break;
+       }
+ 
+-      if (hw->mac.type == igc_i225 &&
+-          hw->phy.id == I225_I_PHY_ID) {
++      if (hw->mac.type == igc_i225) {
+               if (!netif_carrier_ok(adapter->netdev)) {
+                       adapter->flags &= ~IGC_FLAG_NEED_LINK_UPDATE;
+               } else if (!(adapter->flags & IGC_FLAG_NEED_LINK_UPDATE)) {
+--- a/drivers/net/ethernet/intel/igc/igc_phy.c
++++ b/drivers/net/ethernet/intel/igc/igc_phy.c
+@@ -249,8 +249,7 @@ static s32 igc_phy_setup_autoneg(struct
+                       return ret_val;
+       }
+ 
+-      if ((phy->autoneg_mask & ADVERTISE_2500_FULL) &&
+-          hw->phy.id == I225_I_PHY_ID) {
++      if (phy->autoneg_mask & ADVERTISE_2500_FULL) {
+               /* Read the MULTI GBT AN Control Register - reg 7.32 */
+               ret_val = phy->ops.read_reg(hw, (STANDARD_AN_REG_MASK <<
+                                           MMD_DEVADDR_SHIFT) |
+@@ -390,8 +389,7 @@ static s32 igc_phy_setup_autoneg(struct
+               ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL,
+                                            mii_1000t_ctrl_reg);
+ 
+-      if ((phy->autoneg_mask & ADVERTISE_2500_FULL) &&
+-          hw->phy.id == I225_I_PHY_ID)
++      if (phy->autoneg_mask & ADVERTISE_2500_FULL)
+               ret_val = phy->ops.write_reg(hw,
+                                            (STANDARD_AN_REG_MASK <<
+                                            MMD_DEVADDR_SHIFT) |

diff --git a/target/linux/generic/backport-5.10/774-v5.15-2-igc-remove-phy-type-checking.patch b/target/linux/generic/backport-5.10/774-v5.15-2-igc-remove-phy-type-checking.patch
new file mode 100644 (file)
index 0000000..ad4d1bb
--- /dev/null
+++ b/target/linux/generic/backport-5.10/774-v5.15-2-igc-remove-phy-type-checking.patch
@@ -0,0 +1,43 @@
+From 47bca7de6a4fb8dcb564c7ca14d885c91ed19e03 Mon Sep 17 00:00:00 2001
+From: Sasha Neftin <sasha.neftin@intel.com>
+Date: Sat, 10 Jul 2021 20:57:50 +0300
+Subject: igc: Remove phy->type checking
+
+i225 devices have only one phy->type: copper. There is no point checking
+phy->type during the igc_has_link method from the watchdog that
+invoked every 2 seconds.
+This patch comes to clean up these pointless checkings.
+
+Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
+Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com>
+Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
+---
+ drivers/net/ethernet/intel/igc/igc_main.c | 15 ++++-----------
+ 1 file changed, 4 insertions(+), 11 deletions(-)
+
+(limited to 'drivers/net/ethernet/intel/igc')
+
+--- a/drivers/net/ethernet/intel/igc/igc_main.c
++++ b/drivers/net/ethernet/intel/igc/igc_main.c
+@@ -4177,17 +4177,10 @@ bool igc_has_link(struct igc_adapter *ad
+        * false until the igc_check_for_link establishes link
+        * for copper adapters ONLY
+        */
+-      switch (hw->phy.media_type) {
+-      case igc_media_type_copper:
+-              if (!hw->mac.get_link_status)
+-                      return true;
+-              hw->mac.ops.check_for_link(hw);
+-              link_active = !hw->mac.get_link_status;
+-              break;
+-      default:
+-      case igc_media_type_unknown:
+-              break;
+-      }
++      if (!hw->mac.get_link_status)
++              return true;
++      hw->mac.ops.check_for_link(hw);
++      link_active = !hw->mac.get_link_status;
+ 
+       if (hw->mac.type == igc_i225) {
+               if (!netif_carrier_ok(adapter->netdev)) {