Tegra: spe: shared console for Tegra platforms

There are Tegra platforms which have limited UART ports and so
all the components have to share the console. The SPE helps out
by collecting all the logs in such cases and prints them on the
shared UART port.

This patch adds a driver to communicate with the SPE driver, which
in turn provides the console.

Change-Id: Ie750520b936b8bed0ab1d876f03fc0a3490a85a3
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

diff --git a/plat/nvidia/tegra/common/drivers/spe/shared_console.S b/plat/nvidia/tegra/common/drivers/spe/shared_console.S
new file mode 100644 (file)
index 0000000..a9f0334
--- /dev/null
+++ b/plat/nvidia/tegra/common/drivers/spe/shared_console.S
@@ -0,0 +1,118 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <asm_macros.S>
+
+#define CONSOLE_NUM_BYTES_SHIFT                24
+#define CONSOLE_FLUSH_DATA_TO_PORT     (1 << 26)
+#define CONSOLE_RING_DOORBELL          (1 << 31)
+#define CONSOLE_IS_BUSY                        (1 << 31)
+#define CONSOLE_WRITE                  (CONSOLE_RING_DOORBELL | CONSOLE_FLUSH_DATA_TO_PORT)
+
+       /*
+        * This file contains a driver implementation to make use of the
+        * real console implementation provided by the SPE firmware running
+        * SoCs after Tegra186.
+        *
+        * This console is shared by multiple components and the SPE firmware
+        * finally displays everything on the UART port.
+        */
+
+       .globl  console_core_init
+       .globl  console_core_putc
+       .globl  console_core_getc
+       .globl  console_core_flush
+
+       /* -----------------------------------------------
+        * int console_core_init(uintptr_t base_addr,
+        * unsigned int uart_clk, unsigned int baud_rate)
+        * Function to initialize the console without a
+        * C Runtime to print debug information. This
+        * function will be accessed by console_init and
+        * crash reporting.
+        * In: x0 - console base address
+        *     w1 - Uart clock in Hz
+        *     w2 - Baud rate
+        * Out: return 1 on success else 0 on error
+        * Clobber list : x1, x2
+        * -----------------------------------------------
+        */
+func console_core_init
+       /* Check the input base address */
+       cbz     x0, core_init_fail
+       mov     w0, #1
+       ret
+core_init_fail:
+       mov     w0, wzr
+       ret
+endfunc console_core_init
+
+       /* --------------------------------------------------------
+        * int console_core_putc(int c, uintptr_t base_addr)
+        * Function to output a character over the console. It
+        * returns the character printed on success or -1 on error.
+        * In : w0 - character to be printed
+        *      x1 - console base address
+        * Out : return -1 on error else return character.
+        * Clobber list : x2
+        * --------------------------------------------------------
+        */
+func console_core_putc
+       /* Check the input parameter */
+       cbz     x1, putc_error
+
+       /* wait until spe is ready */
+1:     ldr     w2, [x1]
+       and     w2, w2, #CONSOLE_IS_BUSY
+       cbnz    w2, 1b
+
+       /* spe is ready */
+       mov     w2, w0
+       and     w2, w2, #0xFF
+       mov     w3, #(CONSOLE_WRITE | (1 << CONSOLE_NUM_BYTES_SHIFT))
+       orr     w2, w2, w3
+       str     w2, [x1]
+
+       ret
+putc_error:
+       mov     w0, #-1
+       ret
+endfunc console_core_putc
+
+       /* ---------------------------------------------
+        * int console_core_getc(uintptr_t base_addr)
+        * Function to get a character from the console.
+        * It returns the character grabbed on success
+        * or -1 on error.
+        * In : x0 - console base address
+        * Clobber list : x0, x1
+        * ---------------------------------------------
+        */
+func console_core_getc
+       mov     w0, #-1
+       ret
+endfunc console_core_getc
+
+       /* ---------------------------------------------
+        * int console_core_flush(uintptr_t base_addr)
+        * Function to force a write of all buffered
+        * data that hasn't been output.
+        * In : x0 - console base address
+        * Out : return -1 on error else return 0.
+        * Clobber list : x0, x1
+        * ---------------------------------------------
+        */
+func console_core_flush
+       cbz     x0, flush_error
+
+       /* flush console */
+       mov     w1, #CONSOLE_WRITE
+       str     w1, [x0]
+       mov     w0, #0
+       ret
+flush_error:
+       mov     w0, #-1
+       ret
+endfunc console_core_flush