+++ /dev/null
-From bf2ef777f8ed0830be49b62167cc67d3be6abba6 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 22 Oct 2013 21:51:26 -0700
-Subject: [PATCH 3/3] ARM: dts: add Gateworks Ventana support
-
-The Gateworks Ventana product family consists of several baseboard designs
-based on the Freescale i.MX6 family of processors. Each baseboard has a
-different set of possible features.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/Makefile | 9 +
- arch/arm/boot/dts/imx6dl-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw52xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw53xx.dts | 19 ++
- arch/arm/boot/dts/imx6dl-gw54xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw51xx.dts | 19 ++
- arch/arm/boot/dts/imx6q-gw52xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw53xx.dts | 23 ++
- arch/arm/boot/dts/imx6q-gw5400-a.dts | 443 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6q-gw54xx.dts | 23 ++
- arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 272 ++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 373 +++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 429 +++++++++++++++++++++++++++++++
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 457 ++++++++++++++++++++++++++++++++++
- 14 files changed, 2147 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6dl-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw51xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw52xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw53xx.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5400-a.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw54xx.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -136,10 +136,19 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx53-mba53.dtb \
- imx53-qsb.dtb \
- imx53-smd.dtb \
-+ imx6dl-gw51xx.dtb \
-+ imx6dl-gw52xx.dtb \
-+ imx6dl-gw53xx.dtb \
-+ imx6dl-gw54xx.dtb \
- imx6dl-sabreauto.dtb \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
-+ imx6q-gw51xx.dtb \
-+ imx6q-gw52xx.dtb \
-+ imx6q-gw53xx.dtb \
-+ imx6q-gw5400-a.dtb \
-+ imx6q-gw54xx.dtb \
- imx6q-phytec-pbab01.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw51xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW51XX";
-+ compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW52XX";
-+ compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW53XX";
-+ compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite GW54XX";
-+ compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
-@@ -0,0 +1,19 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW51XX";
-+ compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw52xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW52XX";
-+ compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw53xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW53XX";
-+ compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
-@@ -0,0 +1,443 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana GW5400-A";
-+ compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
-+
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ ethernet1 = ð1;
-+ i2c0 = &i2c1;
-+ i2c1 = &i2c2;
-+ i2c2 = &i2c3;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ sky2 = ð1;
-+ ssi0 = &ssi1;
-+ spi0 = &ecspi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 10 0>; /* 106 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 5 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&ecspi1 {
-+ fsl,spi-num-chipselects = <1>;
-+ cs-gpios = <&gpio3 19 0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi1_1>;
-+ status = "okay";
-+
-+ flash: m25p80@0 {
-+ compatible = "sst,w25q256";
-+ spi-max-frequency = <30000000>;
-+ reg = <0>;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: mma8450@1c {
-+ compatible = "fsl,mma8450";
-+ reg = <0x1c>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <®_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+ lvds-channel@0 {
-+ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <®_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <®_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
-@@ -0,0 +1,23 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw54xx.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Quad GW54XX";
-+ compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
-+};
-+
-+&sata {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
-@@ -0,0 +1,272 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: 5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ >;
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 0 0>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -0,0 +1,373 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ ethernet0 = &fec;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove this fixed regulator once ltc3676__sw2 driver available */
-+ reg_1p8v: 1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: 5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x13>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 169>;
-+ VDDA-supply = <®_1p8v>;
-+ VDDIO-supply = <®_3p3v>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */
-+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+ lvds-channel@0 {
-+ crtcs = <&ipu1 0>, <&ipu1 1>;
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <®_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -0,0 +1,429 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = ð1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = ð1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ /* remove when pmic 1p8 regulator available */
-+ reg_1p8v: 1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>;
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pciclkgen: si53156@6b {
-+ compatible = "sil,si53156";
-+ reg = <0x6b>;
-+ };
-+
-+ pciswitch: pex8606@3f {
-+ compatible = "plx,pex8606";
-+ reg = <0x3f>;
-+ };
-+
-+ pmic: ltc3676@3c {
-+ compatible = "ltc,ltc3676";
-+ reg = <0x3c>;
-+
-+ regulators {
-+ /* VDD_SOC */
-+ sw1_reg: ltc3676__sw1 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ sw2_reg: ltc3676__sw2 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_ARM */
-+ sw3_reg: ltc3676__sw3 {
-+ regulator-min-microvolt = <1175000>;
-+ regulator-max-microvolt = <1175000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_DDR */
-+ sw4_reg: ltc3676__sw4 {
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <1500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_2P5 */
-+ ldo2_reg: ltc3676__ldo2 {
-+ regulator-min-microvolt = <2500000>;
-+ regulator-max-microvolt = <2500000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_1P8 */
-+ ldo3_reg: ltc3676__ldo3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ /* VDD_HIGH */
-+ ldo4_reg: ltc3676__ldo4 {
-+ regulator-min-microvolt = <3000000>;
-+ regulator-max-microvolt = <3000000>;
-+ };
-+ };
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <®_1p8v>;
-+ VDDIO-supply = <®_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <11 2>; /* gpio1_11 active low */
-+ wakeup-gpios = <&gpio1 11 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* PCIE6EXP_DIO0 */
-+ MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* PCIE6EXP_DIO1 */
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_SHDN */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000 /* PMIC_IRQ# */
-+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x80000000 /* HUB_RST# */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIE_WDIS# */
-+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* ACCEL_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x80000000 /* USBOTG_OC# */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_DET# */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@1 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <®_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <®_3p3v>;
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -0,0 +1,457 @@
-+/*
-+ * Copyright 2013 Gateworks Corporation
-+ *
-+ * The code contained herein is licensed under the GNU General Public
-+ * License. You may obtain a copy of the GNU General Public License
-+ * Version 2 or later at the following locations:
-+ *
-+ * http://www.opensource.org/licenses/gpl-license.html
-+ * http://www.gnu.org/copyleft/gpl.html
-+ */
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ can0 = &can1;
-+ ethernet0 = &fec;
-+ ethernet1 = ð1;
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ sky2 = ð1;
-+ ssi0 = &ssi1;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ usdhc2 = &usdhc3;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttymxc1,115200";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory {
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ gpios = <&gpio1 26 0>;
-+ status = "okay";
-+ };
-+
-+ regulators {
-+ compatible = "simple-bus";
-+
-+ reg_1p0v: 1p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1P0V";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: 3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_h1_vbus: usb_h1_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_h1_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: usb_otg_vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 0>;
-+ enable-active-high;
-+ };
-+ };
-+
-+ sound {
-+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
-+ "fsl,imx-audio-sgtl5000";
-+ model = "imx6q-sabrelite-sgtl5000";
-+ ssi-controller = <&ssi1>;
-+ audio-codec = <&codec>;
-+ audio-routing =
-+ "MIC_IN", "Mic Jack",
-+ "Mic Jack", "Mic Bias",
-+ "Headphone Jack", "HP_OUT";
-+ mux-int-port = <1>;
-+ mux-ext-port = <4>;
-+ };
-+};
-+
-+&audmux {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_audmux_1>; /* AUD4<->sgtl5000 */
-+ status = "okay";
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1_1>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet_1>;
-+ phy-mode = "rgmii";
-+ phy-reset-gpios = <&gpio1 30 0>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand_2>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1_1>;
-+ status = "okay";
-+
-+ eeprom1: eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom2: eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom3: eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom4: eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ gpio: pca9555@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ hwmon: gsc@29 {
-+ compatible = "gw,gsp";
-+ reg = <0x29>;
-+ };
-+
-+ rtc: ds1672@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2_2>;
-+ status = "okay";
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3950000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
-+
-+ pciswitch: pex8609@3f {
-+ compatible = "plx,pex8609";
-+ reg = <0x3f>;
-+ };
-+
-+ pciclkgen: si52147@6b {
-+ compatible = "sil,si52147";
-+ reg = <0x6b>;
-+ };
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3_2>;
-+ status = "okay";
-+
-+ accelerometer: fxos8700@1e {
-+ compatible = "fsl,fxos8700";
-+ reg = <0x1e>;
-+ };
-+
-+ codec: sgtl5000@0a {
-+ compatible = "fsl,sgtl5000";
-+ reg = <0x0a>;
-+ clocks = <&clks 201>;
-+ VDDA-supply = <&sw4_reg>;
-+ VDDIO-supply = <®_3p3v>;
-+ };
-+
-+ hdmiin: adv7611@4c {
-+ compatible = "adi,adv7611";
-+ reg = <0x4c>;
-+ };
-+
-+ touchscreen: egalax_ts@04 {
-+ compatible = "eeti,egalax_ts";
-+ reg = <0x04>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <12 2>; /* gpio7_12 active low */
-+ wakeup-gpios = <&gpio7 12 0>;
-+ };
-+
-+ videoout: adv7393@2a {
-+ compatible = "adi,adv7393";
-+ reg = <0x2a>;
-+ };
-+
-+ videoin: adv7180@20 {
-+ compatible = "adi,adv7180";
-+ reg = <0x20>;
-+ };
-+};
-+
-+&iomuxc {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_hog>;
-+
-+ hog {
-+ pinctrl_hog: hoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
-+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
-+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
-+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
-+ >;
-+ };
-+ };
-+};
-+
-+&ldb {
-+ status = "okay";
-+
-+ lvds-channel@1 {
-+ fsl,data-mapping = "spwg";
-+ fsl,data-width = <18>;
-+ status = "okay";
-+
-+ display-timings {
-+ native-mode = <&timing0>;
-+ timing0: hsd100pxn1 {
-+ clock-frequency = <65000000>;
-+ hactive = <1024>;
-+ vactive = <768>;
-+ hback-porch = <220>;
-+ hfront-porch = <40>;
-+ vback-porch = <21>;
-+ vfront-porch = <7>;
-+ hsync-len = <60>;
-+ vsync-len = <10>;
-+ };
-+ };
-+ };
-+};
-+
-+&pcie {
-+ reset-gpio = <&gpio1 29 0>;
-+ status = "okay";
-+
-+ eth1: sky2@8 { /* MAC/PHY on bus 8 */
-+ compatible = "marvell,sky2";
-+ };
-+};
-+
-+&ssi1 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&ssi2 {
-+ fsl,mode = "i2s-slave";
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_2>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2_3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5_1>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg_1>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <®_usb_h1_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc3_2>;
-+ cd-gpios = <&gpio7 0 0>;
-+ vmmc-supply = <®_3p3v>;
-+ status = "okay";
-+};
projects / openwrt / staging / stintel.git / commitdiff