#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
+#include <linux/jiffies.h>
/* Indexes for the sysfs hooks */
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/dmi.h>
+#include <linux/jiffies.h>
#include <acpi/acpi.h>
#include <acpi/acpixf.h>
#include <linux/err.h>
#include <linux/sysfs.h>
#include <linux/mutex.h>
+#include <linux/jiffies.h>
#define THERMAL_PID_REG 0xfd
#define THERMAL_SMSC_ID_REG 0xfe
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
/**
* struct hih6130 - HIH-6130 device specific data
*/
#include <linux/module.h>
-#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
#include <linux/platform_data/ina2xx.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
/*
* This driver supports various Lineage Compact Power Line DC/DC and AC/DC
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/jiffies.h>
/*
* The LM92 and MAX6635 have 2 two-state pins for address selection,
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
/* LM93 REGISTER ADDRESSES */
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
/* chip registers */
#define LTC4151_SENSE_H 0x00
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4215_cmd {
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
#include <linux/i2c/ltc4245.h>
/* Here are names of the chip's registers (a.k.a. commands) */
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
/* chip registers */
#define LTC4261_STATUS 0x00 /* readonly */
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
#include <linux/i2c/pmbus.h>
#include "pmbus.h"
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/device.h>
+#include <linux/jiffies.h>
/* I2C command bytes */
#define SHT21_TRIG_T_MEASUREMENT_HM 0xe3
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
/* Internal reference voltage (VREF, x 1000 */
#define SMM665_VREF_ADC_X1000 1250
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/jiffies.h>
MODULE_LICENSE("GPL");
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/device.h>
+#include <linux/jiffies.h>
#define DRIVER_NAME "tmp102"
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/jiffies.h>
#define NUMBER_OF_VIN 10
#define NUMBER_OF_FANIN 5
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
+#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f,
#include <linux/kref.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
+#include <linux/jiffies.h>
/* Default values */
#define WATCHDOG_TIMEOUT 2 /* 2 minute default timeout */
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
+#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
+#include <linux/jiffies.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END };