ramips: DIR-610-A1 Support

http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 37785

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 6ecb13352cdae5764c50dbb13e25723a75869991..c0fdc888778633f8954b6f5c94e521efb6e669af 100755 (executable)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -27,7 +27,7 @@ get_status_led() {
        d105)
                status_led="d105:red:power"
                ;;
-       dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1)
+       dir-300-b1 | dir-600-b1 | dir-600-b2 | dir-610-a1 | dir-615-h1 | dir-615-d | dir-620-a1| dir-620-d1)
                status_led="d-link:green:status"
                ;;
        dir-645)

diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 9e9e09be3d6f8c0060defc8d3eafa33635be0af6..a80ea4ff49f981ff47332dd95d6d81eb41d24da6 100644 (file)
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -68,6 +68,7 @@ case "$FIRMWARE" in
        br6524n | \
        carambola | \
        d105 | \
+       dir-610-a1 | \
        dir-615-h1 | \
        dir-620-a1 | \
        dir-620-d1 | \

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
index 7bec16f49103b5955ca56aefabc180e1b8a2ff81..64c7c5e469c084c798b59f12ed8d6b7e024d3423 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds
@@ -77,6 +77,7 @@ case $board in
        dir-810l)
                ucidef_set_led_default "power" "POWER" "dlink:green:power" "1"
                ;;
+       dir-610-a1 |\
        esr-9753)
                set_wifi_led "rt2800pci-phy0::radio"
                ;;

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 1d77e7c886567243f3d1871865f589a66c9257b6..e444ef246dc2ef534af193632eed4d2690b282ef 100755 (executable)
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -77,6 +77,7 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 6t"
                ;;
 
+       dir-610-a1 | \
        dir-615-h1 | \
        mzk-w300nh2)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
@@ -205,7 +206,8 @@ ramips_setup_macs()
 
        dir-300-b1 |\
        dir-300-b2 |\
-       dir-600-b1)
+       dir-600-b1 |\
+       dir-610-a1)
                lan_mac=$(mtd_get_mac_binary devdata 16388)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;

diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
index a0d9b6123bff5a4fdff9e90ede2b4963caa7cb0e..44cab3aa1942664abd615bd867b235bd82b70dba 100644 (file)
--- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
+++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac
@@ -39,7 +39,8 @@ preinit_set_mac_address() {
        asl26555 |\
        dir-300-b1 |\
        dir-300-b2 |\
-       dir-600-b1)
+       dir-600-b1 |\
+       dir-610-a1)
                 mac=$(mtd_get_mac_binary devdata 16388)
                 ifconfig eth0 hw ether $mac 2>/dev/null
                 ;;

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 3ec44d2fffc2b942191c6508131dd90bb0a8825b..066f3bdb404a0b954380bfdc842f270439ee21b5 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -73,6 +73,9 @@ ramips_board_detect() {
        *"DIR-600 B2")
                name="dir-600-b2"
                ;;
+       *"DIR-610 A1")
+               name="dir-610-a1"
+               ;;
        *"DIR-620 A1")
                name="dir-620-a1"
                ;;

diff --git a/target/linux/ramips/dts/DIR-610-A1.dts b/target/linux/ramips/dts/DIR-610-A1.dts
new file mode 100644 (file)
index 0000000..ed5606a
--- /dev/null
+++ b/target/linux/ramips/dts/DIR-610-A1.dts
@@ -0,0 +1,100 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+       compatible = "DIR-610-A1", "ralink,rt5350-soc";
+       model = "D-Link DIR-610 A1";
+       
+       palmbus@10000000 {
+               sysc@0 {
+                       ralink,pinmux = "i2c", "spi", "jtag", "uartlite", "mdio", "sdram", "rgmii";
+                       ralink,uartmux = "gpio";
+                       ralink,wdtmux = <1>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "f25l32pa", "m25p80";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "devdata";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x3b0000>;
+                               };
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               status = "okay";
+       };
+
+       esw@10110000 {
+               status = "okay";
+               ralink,portmap = <0x1f>;
+               ralink,led-polarity = <0>;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               status {
+                       label = "d-link:green:status";
+                       gpios = <&gpio0 9 1>;
+               };
+               wps {
+                       label = "d-link:green:wps";
+                       gpios = <&gpio0 13 1>;
+               };
+        };
+
+        gpio-keys-polled {
+               gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+                       reset {
+                               label = "reset";
+                               gpios = <&gpio0 10 1>;
+                               linux,code = <0x198>;
+                       };
+                       wps {
+                               label = "wps";
+                               gpios = <&gpio0 0 1>;
+                               linux,code = <0x211>;
+                       };
+               };
+       };
+
+       wmac@10180000 {
+               status = "okay";
+       };
+};

diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index ccae6bee77d35d02ecb55241a2ff9b01c6dbec93..18f0fe5e0eca71186b9cbdab089279c8439ce8f2 100644 (file)
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -280,6 +280,8 @@ endif
 # RT305X Profiles
 #
 
+Image/Build/Profile/DIR610A1=$(call BuildFirmware/Seama/$(1),$(1),dir-610-a1,DIR-610-A1,wrgn59_dlob.hans_dir610,ralink_default_fw_size_4M)
+
 edimax_3g6200n_mtd_size=3735552
 Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
 
@@ -505,6 +507,7 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/DIR-300-B1,$(1))
        $(call Image/Build/Profile/DIR-600-B1,$(1))
        $(call Image/Build/Profile/DIR-600-B2,$(1))
+       $(call Image/Build/Profile/DIR610A1,$(1))
        $(call Image/Build/Profile/DIR-615-D,$(1))
        $(call Image/Build/Profile/DIR-620-A1,$(1))
        $(call Image/Build/Profile/DIR-620-D1,$(1))

diff --git a/target/linux/ramips/rt305x/profiles/dlink.mk b/target/linux/ramips/rt305x/profiles/dlink.mk
index 29d8b7c38a1870b1e9d7757e67a3b327d0810bb2..877724d886581aa1424babd689bc9834009a0e8a 100644 (file)
--- a/target/linux/ramips/rt305x/profiles/dlink.mk
+++ b/target/linux/ramips/rt305x/profiles/dlink.mk
@@ -18,3 +18,13 @@ endef
 
 $(eval $(call Profile,DIR615H1))
 
+define Profile/DIR610A1
+       NAME:=Dlink DIR-610 A1
+       PACKAGES:=kmod-ledtrig-netdev kmod-ledtrig-timer
+endef
+
+define Profile/DIR610A1/Description
+       Package set for Dlink DIR610 A1 board
+endef
+
+$(eval $(call Profile,DIR610A1))