--- /dev/null
+From 54a0ed0df49609f4e3f098f8943e38e389dc2e15 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Tue, 12 May 2020 20:20:25 +0300
+Subject: net: dsa: provide an option for drivers to always receive bridge
+ VLANs
+
+DSA assumes that a bridge which has vlan filtering disabled is not
+vlan aware, and ignores all vlan configuration. However, the kernel
+software bridge code allows configuration in this state.
+
+This causes the kernel's idea of the bridge vlan state and the
+hardware state to disagree, so "bridge vlan show" indicates a correct
+configuration but the hardware lacks all configuration. Even worse,
+enabling vlan filtering on a DSA bridge immediately blocks all traffic
+which, given the output of "bridge vlan show", is very confusing.
+
+Provide an option that drivers can set to indicate they want to receive
+vlan configuration even when vlan filtering is disabled. At the very
+least, this is safe for Marvell DSA bridges, which do not look up
+ingress traffic in the VTU if the port is in 8021Q disabled state. It is
+also safe for the Ocelot switch family. Whether this change is suitable
+for all DSA bridges is not known.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ include/net/dsa.h | 7 +++++++
+ net/dsa/dsa_priv.h | 1 +
+ net/dsa/port.c | 14 ++++++++++++++
+ net/dsa/slave.c | 8 ++++----
+ 4 files changed, 26 insertions(+), 4 deletions(-)
+
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
+@@ -270,6 +270,13 @@ struct dsa_switch {
+ */
+ bool vlan_filtering_is_global;
+
++ /* Pass .port_vlan_add and .port_vlan_del to drivers even for bridges
++ * that have vlan_filtering=0. All drivers should ideally set this (and
++ * then the option would get removed), but it is unknown whether this
++ * would break things or not.
++ */
++ bool configure_vlan_while_not_filtering;
++
+ /* In case vlan_filtering_is_global is set, the VLAN awareness state
+ * should be retrieved from here and not from the per-port settings.
+ */
+--- a/net/dsa/dsa_priv.h
++++ b/net/dsa/dsa_priv.h
+@@ -136,6 +136,7 @@ int dsa_port_bridge_join(struct dsa_port
+ void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br);
+ int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
+ struct switchdev_trans *trans);
++bool dsa_port_skip_vlan_configuration(struct dsa_port *dp);
+ int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
+ struct switchdev_trans *trans);
+ int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
+--- a/net/dsa/port.c
++++ b/net/dsa/port.c
+@@ -238,6 +238,20 @@ int dsa_port_vlan_filtering(struct dsa_p
+ return 0;
+ }
+
++/* This enforces legacy behavior for switch drivers which assume they can't
++ * receive VLAN configuration when enslaved to a bridge with vlan_filtering=0
++ */
++bool dsa_port_skip_vlan_configuration(struct dsa_port *dp)
++{
++ struct dsa_switch *ds = dp->ds;
++
++ if (!dp->bridge_dev)
++ return false;
++
++ return (!ds->configure_vlan_while_not_filtering &&
++ !br_vlan_enabled(dp->bridge_dev));
++}
++
+ int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock,
+ struct switchdev_trans *trans)
+ {
+--- a/net/dsa/slave.c
++++ b/net/dsa/slave.c
+@@ -319,7 +319,7 @@ static int dsa_slave_vlan_add(struct net
+ if (obj->orig_dev != dev)
+ return -EOPNOTSUPP;
+
+- if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev))
++ if (dsa_port_skip_vlan_configuration(dp))
+ return 0;
+
+ vlan = *SWITCHDEV_OBJ_PORT_VLAN(obj);
+@@ -386,7 +386,7 @@ static int dsa_slave_vlan_del(struct net
+ if (obj->orig_dev != dev)
+ return -EOPNOTSUPP;
+
+- if (dp->bridge_dev && !br_vlan_enabled(dp->bridge_dev))
++ if (dsa_port_skip_vlan_configuration(dp))
+ return 0;
+
+ /* Do not deprogram the CPU port as it may be shared with other user
+@@ -1118,7 +1118,7 @@ static int dsa_slave_vlan_rx_add_vid(str
+ * need to emulate the switchdev prepare + commit phase.
+ */
+ if (dp->bridge_dev) {
+- if (!br_vlan_enabled(dp->bridge_dev))
++ if (dsa_port_skip_vlan_configuration(dp))
+ return 0;
+
+ /* br_vlan_get_info() returns -EINVAL or -ENOENT if the
+@@ -1152,7 +1152,7 @@ static int dsa_slave_vlan_rx_kill_vid(st
+ * need to emulate the switchdev prepare + commit phase.
+ */
+ if (dp->bridge_dev) {
+- if (!br_vlan_enabled(dp->bridge_dev))
++ if (dsa_port_skip_vlan_configuration(dp))
+ return 0;
+
+ /* br_vlan_get_info() returns -EINVAL or -ENOENT if the
--- /dev/null
+From 0141792f8b7300006b874dda1c35acd0abd90d9d Mon Sep 17 00:00:00 2001
+From: DENG Qingfang <dqfext@gmail.com>
+Date: Fri, 15 May 2020 23:25:55 +0800
+Subject: net: dsa: mt7530: fix VLAN setup
+
+Allow DSA to add VLAN entries even if VLAN filtering is disabled, so
+enabling it will not block the traffic of existent ports in the bridge
+
+Signed-off-by: DENG Qingfang <dqfext@gmail.com>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/mt7530.c | 13 +------------
+ 1 file changed, 1 insertion(+), 12 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1096,12 +1096,6 @@ mt7530_port_vlan_add(struct dsa_switch *
+ struct mt7530_priv *priv = ds->priv;
+ u16 vid;
+
+- /* The port is kept as VLAN-unaware if bridge with vlan_filtering not
+- * being set.
+- */
+- if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
+- return;
+-
+ mutex_lock(&priv->reg_mutex);
+
+ for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
+@@ -1127,12 +1121,6 @@ mt7530_port_vlan_del(struct dsa_switch *
+ struct mt7530_priv *priv = ds->priv;
+ u16 vid, pvid;
+
+- /* The port is kept as VLAN-unaware if bridge with vlan_filtering not
+- * being set.
+- */
+- if (!dsa_port_is_vlan_filtering(&ds->ports[port]))
+- return 0;
+-
+ mutex_lock(&priv->reg_mutex);
+
+ pvid = priv->ports[port].pvid;
+@@ -1245,6 +1233,7 @@ mt7530_setup(struct dsa_switch *ds)
+ * as two netdev instances.
+ */
+ dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
++ ds->configure_vlan_while_not_filtering = true;
+
+ if (priv->id == ID_MT7530) {
+ regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
--- /dev/null
+From a1b291f3f6c80a6c5ccad7283fc472d77a2a4763 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Sun, 22 Dec 2019 12:40:11 +0000
+Subject: [PATCH] net: dsa: mv88e6xxx: fix vlan setup
+
+Provide an option that drivers can set to indicate they want to receive
+vlan configuration even when vlan filtering is disabled. This is safe
+for Marvell DSA bridges, which do not look up ingress traffic in the
+VTU if the port is in 8021Q disabled state. Whether this change is
+suitable for all DSA bridges is not known.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+Signed-off-by: DENG Qingfang <dqfext@gmail.com>
+---
+ drivers/net/dsa/mv88e6xxx/chip.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/dsa/mv88e6xxx/chip.c
++++ b/drivers/net/dsa/mv88e6xxx/chip.c
+@@ -2657,6 +2657,7 @@ static int mv88e6xxx_setup(struct dsa_sw
+
+ chip->ds = ds;
+ ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip);
++ ds->configure_vlan_while_not_filtering = true;
+
+ mv88e6xxx_reg_lock(chip);
+
projects / openwrt / staging / ynezz.git / commitdiff