--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-3662-a1", "qca,qca9558";
+ model = "D-Link DAP-3662 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xef0000>;
+ compatible = "wrg";
+ };
+
+ partition@f60000 {
+ label = "dlink";
+ reg = <0xf60000 0x90000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0_PAD_CTRL */
+ 0x0c 0x00080080 /* PORT6_PAD_CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6_STATUS */
+ >;
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+ð1 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:wan" "6@eth1"
;;
+ dlink,dap-3662-a1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan:2" "2:lan:1" "6@eth1"
+ ;;
dlink,dch-g020-a1)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:2" "2:lan:1"
lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
label_mac=$lan_mac
;;
- dlink,dap-2695-a1)
+ dlink,dap-2695-a1|\
+ dlink,dap-3662-a1)
label_mac=$(mtd_get_mac_ascii bdcfg "wlanmac")
;;
dlink,dir-825-b1)
endef
TARGET_DEVICES += dlink_dap-3320-a1
+define Device/dlink_dap-3662-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9558
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-3662
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15296k
+ DAP_SIGNATURE := wapac11_dkbs_dap3662
+endef
+TARGET_DEVICES += dlink_dap-3662-a1
+
define Device/dlink_dch-g020-a1
SOC := qca9531
DEVICE_VENDOR := D-Link