ath9k_htc: do some initial hardware configuration

Currently we configure harwdare and clock, only after
interface start. In this case, if we reload module or
reboot PC without configuring adapter, firmware will freeze.
There is no software way to reset adpter.

This patch add initial configuration and set it in
disabled state, to avoid this freeze. Behaviour of this patch
should be similar to: ifconfig wlan0 up; ifconfig wlan0 down.

Bug: https://github.com/qca/open-ath9k-htc-firmware/issues/1
Tested-by: Bo Shi <cnshibo@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 71a183ffc77faf04f590b3d9454d1fb3c798ccaf..c3676bf1d6c45ab92d8a161d18ad5f3f0c586d18 100644 (file)
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -861,6 +861,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
        if (error != 0)
                goto err_rx;
 
+       ath9k_hw_disable(priv->ah);
 #ifdef CONFIG_MAC80211_LEDS
        /* must be initialized before ieee80211_register_hw */
        priv->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(priv->hw,