ramips: fix switch for Nexx devices

There are 2 ethernet ports on Nexx WT1520 and WT3020. These ethernet
ports are assigned as follows, and other ports cannot be used.

- WT1520:
  - port0 -> lan
  - port4 -> wan

- WT3020:
  - port0 -> wan
  - port4 -> lan

I dropped ports that cannot be used.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f95f24c6c232014f16e56d658eff0a4113f1845e..20ecf1ab7643ba351edd5e535853720c9a010713 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -112,8 +112,6 @@ ramips_setup_interfaces()
        witi|\
        wl-wn575a3|\
        wndr3700v5|\
-       wt1520-4M|\
-       wt1520-8M|\
        youku-yk1|\
        zbt-ape522ii|\
        zbt-we1326|\
@@ -209,8 +207,6 @@ ramips_setup_interfaces()
        wrtnode|\
        wrtnode2p | \
        wrtnode2r | \
-       wt3020-4M|\
-       wt3020-8M|\
        zbt-wa05)
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
@@ -323,7 +319,9 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
-       vonets,var11n-300)
+       vonets,var11n-300|\
+       wt1520-4M|\
+       wt1520-8M)
                ucidef_add_switch "switch0" \
                        "0:lan" "4:wan" "6@eth0"
                ;;
@@ -356,6 +354,11 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "0:wan" "6@eth0"
                ;;
+       wt3020-4M|\
+       wt3020-8M)
+               ucidef_add_switch "switch0" \
+                       "4:lan" "0:wan" "6@eth0"
+               ;;
        zbtlink,zbt-we1226|\
        y1)
                ucidef_add_switch "switch0" \