--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ model = "TP-Link RE350K v1";
+ compatible = "tplink,re350k-v1", "qca,qca9558";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ mdio-gpio0 = &mdio2;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ app-config {
+ label = "app-config";
+ linux,code = <BTN_0>;
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ led {
+ label = "led";
+ linux,code = <BTN_1>;
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "tp-link:green:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g-green {
+ label = "tp-link:green:wlan2g";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan2g-red {
+ label = "tp-link:red:wlan2g";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g-green {
+ label = "tp-link:green:wlan5g";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wlan5g-red {
+ label = "tp-link:red:wlan5g";
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ mdio2: mdio {
+ compatible = "virtual,mdio-gpio";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>,
+ <&gpio 18 GPIO_ACTIVE_HIGH>;
+
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+
+ phy-mode = "rgmii-rxid";
+ at803x-disable-smarteee;
+ };
+ };
+};
+
+ð0 {
+ status = "okay";
+
+ mtd-mac-address = <&config 0x10008>;
+ pll-data = <0x9e000000 0x80000101 0x80001313>;
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ rxdv-delay = <2>;
+ rxd-delay = <2>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "tplink,firmware";
+ label = "firmware";
+ reg = <0x020000 0xd70000>;
+ };
+
+ config: partition@d90000 {
+ label = "config";
+ reg = <0xd90000 0x260000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&config 0x10008>;
+};
endef
TARGET_DEVICES += tplink_archer-c7-v5
+define Device/tplink_re350k-v1
+ $(Device/tplink)
+ ATH_SOC := qca9558
+ IMAGE_SIZE := 13760k
+ DEVICE_TITLE := TP-Link RE350K v1
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ TPLINK_BOARD_ID := RE350K-V1
+ TPLINK_HWID := 0x0
+ TPLINK_HWREV := 0
+ KERNEL := kernel-bin | append-dtb | lzma | tplink-v1-header -O
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
+ check-size $$$$(IMAGE_SIZE) | append-metadata
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+endef
+TARGET_DEVICES += tplink_re350k-v1
+
define Device/tplink_re450-v2
$(Device/tplink)
ATH_SOC := qca9563
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the RE350K v1 */
+ {
+ .id = "RE350K-V1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\n"
+ "{product_name:RE350K,product_ver:1.0.0,special_id:00000000,product_region:US}\n",
+ .support_trail = '\x00',
+ .soft_ver = NULL,
+
+ /** We're using a dynamic kernel/rootfs split here */
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"firmware", 0x20000, 0xd70000},
+ {"partition-table", 0xd90000, 0x02000},
+ {"default-mac", 0xda0000, 0x00020},
+ {"pin", 0xda0100, 0x00020},
+ {"product-info", 0xda1100, 0x01000},
+ {"soft-version", 0xdb0000, 0x01000},
+ {"support-list", 0xdb1000, 0x01000},
+ {"profile", 0xdb2000, 0x08000},
+ {"user-config", 0xdc0000, 0x10000},
+ {"default-config", 0xdd0000, 0x10000},
+ {"device-id", 0xde0000, 0x00108},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system"
+ },
+
/** Firmware layout for the RE355 */
{
.id = "RE355",