arm64: Add APM X-Gene SoC AHCI SATA host controller DTS entries
authorLoc Ho <lho@apm.com>
Fri, 14 Mar 2014 23:53:21 +0000 (17:53 -0600)
committerTejun Heo <tj@kernel.org>
Mon, 17 Mar 2014 19:54:42 +0000 (15:54 -0400)
This patch adds APM X-Gene SoC AHCI SATA host controller DTS entries.

Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Tuan Phan <tphan@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
arch/arm64/boot/dts/apm-storm.dtsi

index 6d4f493aac9a6ebef0153ebb27e57196cc414f8b..93f4b2dd92484863e8015da4a622a0c17745de5a 100644 (file)
                                enable-offset = <0x0>;
                                enable-mask = <0x06>;
                        };
+
+                       sata01clk: sata01clk@1f21c000 {
+                               compatible = "apm,xgene-device-clock";
+                               #clock-cells = <1>;
+                               clocks = <&socplldiv2 0>;
+                               reg = <0x0 0x1f21c000 0x0 0x1000>;
+                               reg-names = "csr-reg";
+                               clock-output-names = "sata01clk";
+                               csr-offset = <0x4>;
+                               csr-mask = <0x05>;
+                               enable-offset = <0x0>;
+                               enable-mask = <0x39>;
+                       };
+
+                       sata23clk: sata23clk@1f22c000 {
+                               compatible = "apm,xgene-device-clock";
+                               #clock-cells = <1>;
+                               clocks = <&socplldiv2 0>;
+                               reg = <0x0 0x1f22c000 0x0 0x1000>;
+                               reg-names = "csr-reg";
+                               clock-output-names = "sata23clk";
+                               csr-offset = <0x4>;
+                               csr-mask = <0x05>;
+                               enable-offset = <0x0>;
+                               enable-mask = <0x39>;
+                       };
+
+                       sata45clk: sata45clk@1f23c000 {
+                               compatible = "apm,xgene-device-clock";
+                               #clock-cells = <1>;
+                               clocks = <&socplldiv2 0>;
+                               reg = <0x0 0x1f23c000 0x0 0x1000>;
+                               reg-names = "csr-reg";
+                               clock-output-names = "sata45clk";
+                               csr-offset = <0x4>;
+                               csr-mask = <0x05>;
+                               enable-offset = <0x0>;
+                               enable-mask = <0x39>;
+                       };
                };
 
                serial0: serial@1c020000 {
                        apm,tx-boost-gain = <31 31 31 31 31 31>;
                        apm,tx-eye-tuning = <2 10 10 2 10 10>;
                };
+
+               sata1: sata@1a000000 {
+                       compatible = "apm,xgene-ahci";
+                       reg = <0x0 0x1a000000 0x0 0x1000>,
+                             <0x0 0x1f210000 0x0 0x1000>,
+                             <0x0 0x1f21d000 0x0 0x1000>,
+                             <0x0 0x1f21e000 0x0 0x1000>,
+                             <0x0 0x1f217000 0x0 0x1000>;
+                       interrupts = <0x0 0x86 0x4>;
+                       status = "disabled";
+                       clocks = <&sata01clk 0>;
+                       phys = <&phy1 0>;
+                       phy-names = "sata-phy";
+               };
+
+               sata2: sata@1a400000 {
+                       compatible = "apm,xgene-ahci";
+                       reg = <0x0 0x1a400000 0x0 0x1000>,
+                             <0x0 0x1f220000 0x0 0x1000>,
+                             <0x0 0x1f22d000 0x0 0x1000>,
+                             <0x0 0x1f22e000 0x0 0x1000>,
+                             <0x0 0x1f227000 0x0 0x1000>;
+                       interrupts = <0x0 0x87 0x4>;
+                       status = "ok";
+                       clocks = <&sata23clk 0>;
+                       phys = <&phy2 0>;
+                       phy-names = "sata-phy";
+               };
+
+               sata3: sata@1a800000 {
+                       compatible = "apm,xgene-ahci";
+                       reg = <0x0 0x1a800000 0x0 0x1000>,
+                             <0x0 0x1f230000 0x0 0x1000>,
+                             <0x0 0x1f23d000 0x0 0x1000>,
+                             <0x0 0x1f23e000 0x0 0x1000>;
+                       interrupts = <0x0 0x88 0x4>;
+                       status = "ok";
+                       clocks = <&sata45clk 0>;
+                       phys = <&phy3 0>;
+                       phy-names = "sata-phy";
+               };
        };
 };