#include "dhd_proto.h"
#include "dhd_dbg.h"
#include "wl_cfg80211.h"
+#include "fwil.h"
MODULE_AUTHOR("Broadcom Corporation");
MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN fullmac driver.");
static void _brcmf_set_multicast_list(struct work_struct *work)
{
+ struct brcmf_if *ifp;
struct net_device *ndev;
struct netdev_hw_addr *ha;
- u32 dcmd_value, cnt;
+ u32 cmd_value, cnt;
__le32 cnt_le;
- __le32 dcmd_le_value;
-
- struct brcmf_dcmd dcmd;
char *buf, *bufp;
- uint buflen;
- int ret;
-
+ u32 buflen;
+ s32 err;
struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
multicast_work);
- ndev = drvr->iflist[0]->ndev;
- cnt = netdev_mc_count(ndev);
+ brcmf_dbg(TRACE, "enter\n");
+
+ ifp = drvr->iflist[0];
+ ndev = ifp->ndev;
/* Determine initial value of allmulti flag */
- dcmd_value = (ndev->flags & IFF_ALLMULTI) ? true : false;
+ cmd_value = (ndev->flags & IFF_ALLMULTI) ? true : false;
/* Send down the multicast list first. */
-
- buflen = sizeof("mcast_list") + sizeof(cnt) + (cnt * ETH_ALEN);
- bufp = buf = kmalloc(buflen, GFP_ATOMIC);
- if (!bufp)
+ cnt = netdev_mc_count(ndev);
+ buflen = sizeof(cnt) + (cnt * ETH_ALEN);
+ buf = kmalloc(buflen, GFP_ATOMIC);
+ if (!buf)
return;
-
- strcpy(bufp, "mcast_list");
- bufp += strlen("mcast_list") + 1;
+ bufp = buf;
cnt_le = cpu_to_le32(cnt);
- memcpy(bufp, &cnt_le, sizeof(cnt));
+ memcpy(bufp, &cnt_le, sizeof(cnt_le));
bufp += sizeof(cnt_le);
netdev_for_each_mc_addr(ha, ndev) {
cnt--;
}
- memset(&dcmd, 0, sizeof(dcmd));
- dcmd.cmd = BRCMF_C_SET_VAR;
- dcmd.buf = buf;
- dcmd.len = buflen;
- dcmd.set = true;
-
- ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
- if (ret < 0) {
- brcmf_dbg(ERROR, "%s: set mcast_list failed, cnt %d\n",
- brcmf_ifname(drvr, 0), cnt);
- dcmd_value = cnt ? true : dcmd_value;
+ err = brcmf_fil_iovar_data_set(ifp, "mcast_list", buf, buflen);
+ if (err < 0) {
+ brcmf_dbg(ERROR, "Setting mcast_list failed, %d\n", err);
+ cmd_value = cnt ? true : cmd_value;
}
kfree(buf);
- /* Now send the allmulti setting. This is based on the setting in the
+ /*
+ * Now send the allmulti setting. This is based on the setting in the
* net_device flags, but might be modified above to be turned on if we
* were trying to set some addresses and dongle rejected it...
*/
-
- buflen = sizeof("allmulti") + sizeof(dcmd_value);
- buf = kmalloc(buflen, GFP_ATOMIC);
- if (!buf)
- return;
-
- dcmd_le_value = cpu_to_le32(dcmd_value);
-
- if (!brcmf_c_mkiovar
- ("allmulti", (void *)&dcmd_le_value,
- sizeof(dcmd_le_value), buf, buflen)) {
- brcmf_dbg(ERROR, "%s: mkiovar failed for allmulti, datalen %d buflen %u\n",
- brcmf_ifname(drvr, 0),
- (int)sizeof(dcmd_value), buflen);
- kfree(buf);
- return;
- }
-
- memset(&dcmd, 0, sizeof(dcmd));
- dcmd.cmd = BRCMF_C_SET_VAR;
- dcmd.buf = buf;
- dcmd.len = buflen;
- dcmd.set = true;
-
- ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
- if (ret < 0) {
- brcmf_dbg(ERROR, "%s: set allmulti %d failed\n",
- brcmf_ifname(drvr, 0),
- le32_to_cpu(dcmd_le_value));
- }
-
- kfree(buf);
-
- /* Finally, pick up the PROMISC flag as well, like the NIC
- driver does */
-
- dcmd_value = (ndev->flags & IFF_PROMISC) ? true : false;
- dcmd_le_value = cpu_to_le32(dcmd_value);
-
- memset(&dcmd, 0, sizeof(dcmd));
- dcmd.cmd = BRCMF_C_SET_PROMISC;
- dcmd.buf = &dcmd_le_value;
- dcmd.len = sizeof(dcmd_le_value);
- dcmd.set = true;
-
- ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
- if (ret < 0) {
- brcmf_dbg(ERROR, "%s: set promisc %d failed\n",
- brcmf_ifname(drvr, 0),
- le32_to_cpu(dcmd_le_value));
- }
+ err = brcmf_fil_iovar_int_set(ifp, "allmulti", cmd_value);
+ if (err < 0)
+ brcmf_dbg(ERROR, "Setting allmulti failed, %d\n", err);
+
+ /*Finally, pick up the PROMISC flag */
+ cmd_value = (ndev->flags & IFF_PROMISC) ? true : false;
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PROMISC, cmd_value);
+ if (err < 0)
+ brcmf_dbg(ERROR, "Setting BRCMF_C_SET_PROMISC failed, %d\n",
+ err);
}
static void
_brcmf_set_mac_address(struct work_struct *work)
{
- char buf[32];
- struct brcmf_dcmd dcmd;
- int ret;
+ struct brcmf_if *ifp;
+ struct net_device *ndev;
+ s32 err;
struct brcmf_pub *drvr = container_of(work, struct brcmf_pub,
setmacaddr_work);
brcmf_dbg(TRACE, "enter\n");
- if (!brcmf_c_mkiovar("cur_etheraddr", (char *)drvr->macvalue,
- ETH_ALEN, buf, 32)) {
- brcmf_dbg(ERROR, "%s: mkiovar failed for cur_etheraddr\n",
- brcmf_ifname(drvr, 0));
- return;
- }
- memset(&dcmd, 0, sizeof(dcmd));
- dcmd.cmd = BRCMF_C_SET_VAR;
- dcmd.buf = buf;
- dcmd.len = 32;
- dcmd.set = true;
- ret = brcmf_proto_dcmd(drvr, 0, &dcmd, dcmd.len);
- if (ret < 0)
- brcmf_dbg(ERROR, "%s: set cur_etheraddr failed\n",
- brcmf_ifname(drvr, 0));
- else
- memcpy(drvr->iflist[0]->ndev->dev_addr,
- drvr->macvalue, ETH_ALEN);
+ ifp = drvr->iflist[0];
+ ndev = ifp->ndev;
- return;
+ err = brcmf_fil_iovar_data_set(ifp, "cur_etheraddr", drvr->macvalue,
+ ETH_ALEN);
+ if (err < 0) {
+ brcmf_dbg(ERROR, "Setting cur_etheraddr failed, %d\n", err);
+ } else {
+ brcmf_dbg(TRACE, "MAC address updated to %pM\n",
+ drvr->macvalue);
+ memcpy(ndev->dev_addr, drvr->macvalue, ETH_ALEN);
+ }
}
static int brcmf_netdev_set_mac_address(struct net_device *ndev, void *addr)
return &ifp->stats;
}
-/* Retrieve current toe component enables, which are kept
- as a bitmap in toe_ol iovar */
-static int brcmf_toe_get(struct brcmf_pub *drvr, int ifidx, u32 *toe_ol)
-{
- struct brcmf_dcmd dcmd;
- __le32 toe_le;
- char buf[32];
- int ret;
-
- memset(&dcmd, 0, sizeof(dcmd));
-
- dcmd.cmd = BRCMF_C_GET_VAR;
- dcmd.buf = buf;
- dcmd.len = (uint) sizeof(buf);
- dcmd.set = false;
-
- strcpy(buf, "toe_ol");
- ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
- if (ret < 0) {
- /* Check for older dongle image that doesn't support toe_ol */
- if (ret == -EIO) {
- brcmf_dbg(ERROR, "%s: toe not supported by device\n",
- brcmf_ifname(drvr, ifidx));
- return -EOPNOTSUPP;
- }
-
- brcmf_dbg(INFO, "%s: could not get toe_ol: ret=%d\n",
- brcmf_ifname(drvr, ifidx), ret);
- return ret;
- }
-
- memcpy(&toe_le, buf, sizeof(u32));
- *toe_ol = le32_to_cpu(toe_le);
- return 0;
-}
-
-/* Set current toe component enables in toe_ol iovar,
- and set toe global enable iovar */
-static int brcmf_toe_set(struct brcmf_pub *drvr, int ifidx, u32 toe_ol)
+/*
+ * Set current toe component enables in toe_ol iovar,
+ * and set toe global enable iovar
+ */
+static int brcmf_toe_set(struct brcmf_if *ifp, u32 toe_ol)
{
- struct brcmf_dcmd dcmd;
- char buf[32];
- int ret;
- __le32 toe_le = cpu_to_le32(toe_ol);
-
- memset(&dcmd, 0, sizeof(dcmd));
-
- dcmd.cmd = BRCMF_C_SET_VAR;
- dcmd.buf = buf;
- dcmd.len = (uint) sizeof(buf);
- dcmd.set = true;
-
- /* Set toe_ol as requested */
- strcpy(buf, "toe_ol");
- memcpy(&buf[sizeof("toe_ol")], &toe_le, sizeof(u32));
+ s32 err;
- ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
- if (ret < 0) {
- brcmf_dbg(ERROR, "%s: could not set toe_ol: ret=%d\n",
- brcmf_ifname(drvr, ifidx), ret);
- return ret;
+ err = brcmf_fil_iovar_int_set(ifp, "toe_ol", toe_ol);
+ if (err < 0) {
+ brcmf_dbg(ERROR, "Setting toe_ol failed, %d\n", err);
+ return err;
}
- /* Enable toe globally only if any components are enabled. */
- toe_le = cpu_to_le32(toe_ol != 0);
+ err = brcmf_fil_iovar_int_set(ifp, "toe", (toe_ol != 0));
+ if (err < 0)
+ brcmf_dbg(ERROR, "Setting toe failed, %d\n", err);
- strcpy(buf, "toe");
- memcpy(&buf[sizeof("toe")], &toe_le, sizeof(u32));
-
- ret = brcmf_proto_dcmd(drvr, ifidx, &dcmd, dcmd.len);
- if (ret < 0) {
- brcmf_dbg(ERROR, "%s: could not set toe: ret=%d\n",
- brcmf_ifname(drvr, ifidx), ret);
- return ret;
- }
+ return err;
- return 0;
}
static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
.get_drvinfo = brcmf_ethtool_get_drvinfo,
};
-static int brcmf_ethtool(struct brcmf_pub *drvr, void __user *uaddr)
+static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr)
{
+ struct brcmf_pub *drvr = ifp->drvr;
struct ethtool_drvinfo info;
char drvname[sizeof(info.driver)];
u32 cmd;
/* Get toe offload components from dongle */
case ETHTOOL_GRXCSUM:
case ETHTOOL_GTXCSUM:
- ret = brcmf_toe_get(drvr, 0, &toe_cmpnt);
+ ret = brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_cmpnt);
if (ret < 0)
return ret;
return -EFAULT;
/* Read the current settings, update and write back */
- ret = brcmf_toe_get(drvr, 0, &toe_cmpnt);
+ ret = brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_cmpnt);
if (ret < 0)
return ret;
else
toe_cmpnt &= ~csum_dir;
- ret = brcmf_toe_set(drvr, 0, toe_cmpnt);
+ ret = brcmf_toe_set(ifp, toe_cmpnt);
if (ret < 0)
return ret;
/* If setting TX checksum mode, tell Linux the new mode */
if (cmd == ETHTOOL_STXCSUM) {
if (edata.data)
- drvr->iflist[0]->ndev->features |=
- NETIF_F_IP_CSUM;
+ ifp->ndev->features |= NETIF_F_IP_CSUM;
else
- drvr->iflist[0]->ndev->features &=
- ~NETIF_F_IP_CSUM;
+ ifp->ndev->features &= ~NETIF_F_IP_CSUM;
}
break;
return -1;
if (cmd == SIOCETHTOOL)
- return brcmf_ethtool(drvr, ifr->ifr_data);
+ return brcmf_ethtool(ifp, ifr->ifr_data);
return -EOPNOTSUPP;
}
struct brcmf_bus *bus_if = drvr->bus_if;
u32 toe_ol;
s32 ret = 0;
- uint up = 0;
brcmf_dbg(TRACE, "ifidx %d\n", ifp->idx);
memcpy(ndev->dev_addr, drvr->mac, ETH_ALEN);
/* Get current TOE mode from dongle */
- if (brcmf_toe_get(drvr, ifp->idx, &toe_ol) >= 0
+ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0
&& (toe_ol & TOE_TX_CSUM_OL) != 0)
drvr->iflist[ifp->idx]->ndev->features |=
NETIF_F_IP_CSUM;
}
/* make sure RF is ready for work */
- brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_UP, (char *)&up, sizeof(up));
+ brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0);
/* Allow transmit calls */
netif_start_queue(ndev);
projects / openwrt / staging / blogic.git / commitdiff