-export
-
-## NOTE
-## Make sure to have each variable declaration start
-## in the first column, no whitespace allowed.
-
ifeq ($(wildcard $(KLIB_BUILD)/.config),)
# These will be ignored by compat autoconf
- CONFIG_PCI=y
- CONFIG_USB=y
- CONFIG_PCMCIA=y
- CONFIG_SSB=m
+ export CONFIG_PCI=y
+ export CONFIG_USB=y
+ export CONFIG_PCMCIA=y
+ export CONFIG_SSB=m
else
include $(KLIB_BUILD)/.config
endif
endif # kernel Makefile check
# These both are needed by compat-wireless || compat-bluetooth so enable them
- CONFIG_COMPAT_RFKILL=y
+ export CONFIG_COMPAT_RFKILL=y
ifeq ($(CONFIG_MAC80211),y)
$(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular")
else
- CONFIG_COMPAT_WIRELESS=y
- CONFIG_COMPAT_WIRELESS_MODULES=m
- CONFIG_COMPAT_VAR_MODULES=m
+ export CONFIG_COMPAT_WIRELESS=y
+ export CONFIG_COMPAT_WIRELESS_MODULES=m
+ export CONFIG_COMPAT_VAR_MODULES=m
# We could technically separate these but not yet, we only have b44
# Note that we don't intend on backporting network drivers that
# use Multiqueue as that was a pain to backport to kernels older than
# 2.6.27. But -- we could just disable those drivers from kernels
# older than 2.6.27
- CONFIG_COMPAT_NETWORK_MODULES=m
- CONFIG_COMPAT_NET_USB_MODULES=m
+ export CONFIG_COMPAT_NETWORK_MODULES=m
+ export CONFIG_COMPAT_NET_USB_MODULES=m
endif
# The Bluetooth compatibility only builds on kernels >= 2.6.27 for now
ifeq ($(CONFIG_BT),y)
# we'll ignore compiling bluetooth
else
- CONFIG_COMPAT_BLUETOOTH=y
- CONFIG_COMPAT_BLUETOOTH_MODULES=m
+ export CONFIG_COMPAT_BLUETOOTH=y
+ export CONFIG_COMPAT_BLUETOOTH_MODULES=m
endif
endif #CONFIG_COMPAT_KERNEL_2_6_27
ifdef CONFIG_COMPAT_KERNEL_2_6_33
ifndef CONFIG_COMPAT_RHEL_6_1
ifdef CONFIG_FW_LOADER
-CONFIG_COMPAT_FIRMWARE_CLASS=m
+export CONFIG_COMPAT_FIRMWARE_CLASS=m
endif #CONFIG_FW_LOADER
endif #CONFIG_COMPAT_RHEL_6_1
endif #CONFIG_COMPAT_KERNEL_2_6_33
ifdef CONFIG_COMPAT_KERNEL_2_6_36
ifndef CONFIG_COMPAT_RHEL_6_1
- CONFIG_COMPAT_KFIFO=y
+ export CONFIG_COMPAT_KFIFO=y
endif #CONFIG_COMPAT_RHEL_6_1
endif #CONFIG_COMPAT_KERNEL_2_6_36
# whitespace, because they get passed-on through compat_autoconf.h.
#
ifndef CONFIG_COMPAT_KERNEL_2_6_33
-CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y
+export CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y
endif #CONFIG_COMPAT_KERNEL_2_6_33
ifdef CONFIG_COMPAT_RHEL_6_0
-CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y
+export CONFIG_COMPAT_BT_SOCK_CREATE_NEEDS_KERN=y
endif #CONFIG_COMPAT_RHEL_6_0
#
# whitespace, because it gets passed-on through compat_autoconf.h.
#
ifdef CONFIG_COMPAT_RHEL_6_0
-CONFIG_COMPAT_FIRMWARE_DATA_RW_NEEDS_FILP=y
+export CONFIG_COMPAT_FIRMWARE_DATA_RW_NEEDS_FILP=y
endif #CONFIG_COMPAT_RHEL_6_0
# Wireless subsystem stuff
-CONFIG_MAC80211=m
+export CONFIG_MAC80211=m
ifndef CONFIG_COMPAT_KERNEL_2_6_33
-CONFIG_COMPAT_MAC80211_DRIVER_API_TRACER=y
+export CONFIG_COMPAT_MAC80211_DRIVER_API_TRACER=y
endif #CONFIG_COMPAT_KERNEL_2_6_33
# CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_COUNTERS=y
# choose between pid and minstrel as default rate control algorithm
-CONFIG_MAC80211_RC_DEFAULT=minstrel_ht
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+export CONFIG_MAC80211_RC_DEFAULT=minstrel_ht
+export CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID=y
# This is the one used by our compat-wireless net/mac80211/rate.c
# in case you have and old kernel which is overriding this to pid.
-CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
+export CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
+export CONFIG_MAC80211_RC_PID=y
+export CONFIG_MAC80211_RC_MINSTREL=y
+export CONFIG_MAC80211_RC_MINSTREL_HT=y
ifdef CONFIG_LEDS_TRIGGERS
-CONFIG_MAC80211_LEDS=y
+export CONFIG_MAC80211_LEDS=y
endif #CONFIG_LEDS_TRIGGERS
# enable mesh networking too
-CONFIG_MAC80211_MESH=y
+export CONFIG_MAC80211_MESH=y
-CONFIG_CFG80211=m
-CONFIG_CFG80211_DEFAULT_PS=y
+export CONFIG_CFG80211=m
+export CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS=y
# CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS=y
# CONFIG_CFG80211_INTERNAL_REGDB=y
# See below for wext stuff
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
+export CONFIG_LIB80211=m
+export CONFIG_LIB80211_CRYPT_WEP=m
+export CONFIG_LIB80211_CRYPT_CCMP=m
+export CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG=y
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
+export CONFIG_BT=m
+export CONFIG_BT_RFCOMM=m
+export CONFIG_BT_RFCOMM_TTY=y
+export CONFIG_BT_BNEP=m
+export CONFIG_BT_BNEP_MC_FILTER=y
+export CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_CMTP depends on ISDN_CAPI
ifdef CONFIG_ISDN_CAPI
-CONFIG_BT_CMTP=m
+export CONFIG_BT_CMTP=m
endif #CONFIG_ISDN_CAPI
ifndef CONFIG_COMPAT_KERNEL_2_6_28
-CONFIG_COMPAT_BT_HIDP=m
+export CONFIG_COMPAT_BT_HIDP=m
endif #CONFIG_COMPAT_KERNEL_2_6_28
-CONFIG_BT_HCIUART=M
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
+export CONFIG_BT_HCIUART=M
+export CONFIG_BT_HCIUART_H4=y
+export CONFIG_BT_HCIUART_BCSP=y
+export CONFIG_BT_HCIUART_ATH3K=y
+export CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
+export CONFIG_BT_HCIVHCI=m
+export CONFIG_BT_MRVL=m
ifdef CONFIG_PCMCIA
-CONFIG_BT_HCIDTL1=m
-CONFIG_BT_HCIBT3C=m
-CONFIG_BT_HCIBLUECARD=m
-CONFIG_BT_HCIBTUART=m
+export CONFIG_BT_HCIDTL1=m
+export CONFIG_BT_HCIBT3C=m
+export CONFIG_BT_HCIBLUECARD=m
+export CONFIG_BT_HCIBTUART=m
endif #CONFIG_PCMCIA
# wireless_handlers attribute which will be activated by
# CONFIG_WIRELESS_EXT.
ifdef CONFIG_WIRELESS_EXT
-CONFIG_CFG80211_WEXT=y
+export CONFIG_CFG80211_WEXT=y
else #CONFIG_CFG80211_WEXT
$(warning "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m.")
endif #CONFIG_WIRELESS_EXT
ifdef CONFIG_STAGING
-CONFIG_COMPAT_STAGING=m
+export CONFIG_COMPAT_STAGING=m
endif #CONFIG_STAGING
# mac80211 test driver
-CONFIG_MAC80211_HWSIM=m
+export CONFIG_MAC80211_HWSIM=m
-CONFIG_ATH5K=m
+export CONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG=y
# CONFIG_ATH5K_TRACER=y
# CONFIG_ATH5K_AHB=y
-CONFIG_ATH9K=m
-CONFIG_ATH9K_HW=m
-CONFIG_ATH9K_COMMON=m
+export CONFIG_ATH9K=m
+export CONFIG_ATH9K_HW=m
+export CONFIG_ATH9K_COMMON=m
# CONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_PKTLOG=y
# as default once we get minstrel properly tested and blessed by
# our systems engineering team. CCK rates also need to be used
# for long range considerations.
-CONFIG_COMPAT_ATH9K_RATE_CONTROL=y
+export CONFIG_COMPAT_ATH9K_RATE_CONTROL=y
-CONFIG_ATH9K_BTCOEX_SUPPORT=y
+export CONFIG_ATH9K_BTCOEX_SUPPORT=y
# PCI Drivers
ifdef CONFIG_PCI
-CONFIG_ATH5K_PCI=y
-CONFIG_ATH9K_PCI=y
+export CONFIG_ATH5K_PCI=y
+export CONFIG_ATH9K_PCI=y
-CONFIG_IWLWIFI=m
-CONFIG_IWLWIFI_P2P=y
+export CONFIG_IWLWIFI=m
+export CONFIG_IWLWIFI_P2P=y
# CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUGFS=y
# CONFIG_IWLWIFI_DEVICE_TRACING=y
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE=y
-CONFIG_IWLEGACY=m
-CONFIG_COMPAT_IWL4965=m
-CONFIG_IWL3945=m
+export CONFIG_IWLEGACY=m
+export CONFIG_COMPAT_IWL4965=m
+export CONFIG_IWL3945=m
# CONFIG_IWLEGACY_DEBUG=y
# CONFIG_IWLEGACY_DEBUGFS=y
-CONFIG_B43=m
-CONFIG_B43_HWRNG=y
-CONFIG_B43_PCI_AUTOSELECT=y
+export CONFIG_B43=m
+export CONFIG_B43_HWRNG=y
+export CONFIG_B43_PCI_AUTOSELECT=y
ifdef CONFIG_PCMCIA
-CONFIG_B43_PCMCIA=y
+export CONFIG_B43_PCMCIA=y
endif #CONFIG_PCMCIA
ifdef CONFIG_MAC80211_LEDS
-CONFIG_B43_LEDS=y
+export CONFIG_B43_LEDS=y
endif #CONFIG_MAC80211_LEDS
-CONFIG_B43_PHY_LP=y
-CONFIG_B43_PHY_N=y
-CONFIG_B43_PHY_HT=y
+export CONFIG_B43_PHY_LP=y
+export CONFIG_B43_PHY_N=y
+export CONFIG_B43_PHY_HT=y
# CONFIG_B43_PHY_LCN=y
# CONFIG_B43_DEBUG=y
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+export CONFIG_B43LEGACY=m
+export CONFIG_B43LEGACY_HWRNG=y
+export CONFIG_B43LEGACY_PCI_AUTOSELECT=y
ifdef CONFIG_MAC80211_LEDS
-CONFIG_B43LEGACY_LEDS=y
+export CONFIG_B43LEGACY_LEDS=y
endif #CONFIG_MAC80211_LEDS
# CONFIG_B43LEGACY_DEBUG=y
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
+export CONFIG_B43LEGACY_DMA=y
+export CONFIG_B43LEGACY_PIO=y
ifdef CONFIG_WIRELESS_EXT
# The Intel ipws
-CONFIG_LIBIPW=m
+export CONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG=y
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
+export CONFIG_IPW2100=m
+export CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-CONFIG_IPW2200_QOS=y
+export CONFIG_IPW2200=m
+export CONFIG_IPW2200_MONITOR=y
+export CONFIG_IPW2200_RADIOTAP=y
+export CONFIG_IPW2200_PROMISCUOUS=y
+export CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
ifdef CONFIG_SSB
# Sonics Silicon Backplane
-CONFIG_SSB_SPROM=y
+export CONFIG_SSB_SPROM=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
+export CONFIG_SSB_BLOCKIO=y
+export CONFIG_SSB_PCIHOST=y
+export CONFIG_SSB_B43_PCI_BRIDGE=y
ifdef CONFIG_PCMCIA
-CONFIG_SSB_PCMCIAHOST=y
+export CONFIG_SSB_PCMCIAHOST=y
endif #CONFIG_PCMCIA
# CONFIG_SSB_DEBUG=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_B43_SSB=y
+export CONFIG_SSB_DRIVER_PCICORE=y
+export CONFIG_B43_SSB=y
endif #CONFIG_SSB
-CONFIG_BCMA=m
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_HOST_PCI=y
+export CONFIG_BCMA=m
+export CONFIG_BCMA_BLOCKIO=y
+export CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_DEBUG=y
-CONFIG_B43_BCMA=y
-CONFIG_B43_BCMA_EXTRA=y
+export CONFIG_B43_BCMA=y
+export CONFIG_B43_BCMA_EXTRA=y
-CONFIG_P54_PCI=m
+export CONFIG_P54_PCI=m
-CONFIG_B44=m
-CONFIG_B44_PCI=y
+export CONFIG_B44=m
+export CONFIG_B44_PCI=y
-CONFIG_RTL8180=m
+export CONFIG_RTL8180=m
-CONFIG_ADM8211=m
+export CONFIG_ADM8211=m
-CONFIG_RT2X00_LIB_PCI=m
-CONFIG_RT2400PCI=m
-CONFIG_RT2500PCI=m
+export CONFIG_RT2X00_LIB_PCI=m
+export CONFIG_RT2400PCI=m
+export CONFIG_RT2500PCI=m
ifdef CONFIG_CRC_CCITT
-CONFIG_RT2800PCI=m
-CONFIG_RT2800PCI_RT33XX=y
-CONFIG_RT2800PCI_RT35XX=y
-CONFIG_RT2800PCI_RT53XX=y
+export CONFIG_RT2800PCI=m
+export CONFIG_RT2800PCI_RT33XX=y
+export CONFIG_RT2800PCI_RT35XX=y
+export CONFIG_RT2800PCI_RT53XX=y
endif #CONFIG_CRC_CCITT
NEED_RT2X00=y
# CRC to check the firmware. We check here first for the PCI
# driver as we're in the PCI section.
ifdef CONFIG_CRC_ITU_T
-CONFIG_RT61PCI=m
+export CONFIG_RT61PCI=m
endif #CONFIG_CRC_ITU_T
-CONFIG_MWL8K=m
+export CONFIG_MWL8K=m
# Ethernet drivers go here
-CONFIG_ATL1=m
-CONFIG_ATL2=m
-CONFIG_ATL1E=m
+export CONFIG_ATL1=m
+export CONFIG_ATL2=m
+export CONFIG_ATL1E=m
ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_ATL1C=n
-CONFIG_ALX=m
+export CONFIG_ATL1C=n
+export CONFIG_ALX=m
else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_ATL1C=n
-CONFIG_ALX=m
+export CONFIG_ATL1C=n
+export CONFIG_ALX=m
endif #CONFIG_COMPAT_KERNEL_2_6_27
ifdef CONFIG_WIRELESS_EXT
-CONFIG_HERMES=m
-CONFIG_HERMES_CACHE_FW_ON_INIT=y
+export CONFIG_HERMES=m
+export CONFIG_HERMES_CACHE_FW_ON_INIT=y
ifdef CONFIG_PPC_PMAC
-CONFIG_APPLE_AIRPORT=m
+export CONFIG_APPLE_AIRPORT=m
endif #CONFIG_PPC_PMAC
-CONFIG_PLX_HERMES=m
-CONFIG_TMD_HERMES=m
-CONFIG_NORTEL_HERMES=m
-CONFIG_PCI_HERMES=m
+export CONFIG_PLX_HERMES=m
+export CONFIG_TMD_HERMES=m
+export CONFIG_NORTEL_HERMES=m
+export CONFIG_PCI_HERMES=m
ifdef CONFIG_PCMCIA
-CONFIG_PCMCIA_HERMES=m
-CONFIG_PCMCIA_SPECTRUM=m
+export CONFIG_PCMCIA_HERMES=m
+export CONFIG_PCMCIA_SPECTRUM=m
endif #CONFIG_PCMCIA
endif #CONFIG_WIRELESS_EXT
-CONFIG_RTL8192CE=m
-CONFIG_RTL8192SE=m
-CONFIG_RTL8192DE=m
+export CONFIG_RTL8192CE=m
+export CONFIG_RTL8192SE=m
+export CONFIG_RTL8192DE=m
-CONFIG_BRCMSMAC=m
+export CONFIG_BRCMSMAC=m
-CONFIG_MWIFIEX_PCIE=m
+export CONFIG_MWIFIEX_PCIE=m
endif #CONFIG_PCI
## end of PCI
ifdef CONFIG_PCMCIA
ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS=n
-CONFIG_LIBERTAS_CS=n
+export CONFIG_LIBERTAS=n
+export CONFIG_LIBERTAS_CS=n
else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_CS=m
+export CONFIG_LIBERTAS_CS=m
NEED_LIBERTAS=y
endif #CONFIG_COMPAT_KERNEL_2_6_27
## end of PCMCIA
# This is required for some cards
-CONFIG_EEPROM_93CX6=m
+export CONFIG_EEPROM_93CX6=m
# USB Drivers
ifdef CONFIG_USB
ifndef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_COMPAT_ZD1211RW=m
+export CONFIG_COMPAT_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG=y
endif #CONFIG_COMPAT_KERNEL_2_6_29
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
ifdef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_USB_COMPAT_USBNET=n
-CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
-CONFIG_USB_NET_COMPAT_CDCETHER=n
+export CONFIG_USB_COMPAT_USBNET=n
+export CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
+export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
+export CONFIG_USB_NET_COMPAT_CDCETHER=n
else #CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_USB_COMPAT_USBNET=m
+export CONFIG_USB_COMPAT_USBNET=m
ifdef CONFIG_USB_NET_CDCETHER
-CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
+export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
+export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
endif #CONFIG_USB_NET_CDCETHER
ifdef CONFIG_USB_NET_CDCETHER_MODULE
-CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
+export CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
+export CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
endif #CONFIG_USB_NET_CDCETHER
-CONFIG_USB_NET_COMPAT_CDCETHER=m
+export CONFIG_USB_NET_COMPAT_CDCETHER=m
endif #CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_P54_USB=m
-CONFIG_RTL8187=m
+export CONFIG_P54_USB=m
+export CONFIG_RTL8187=m
ifdef CONFIG_MAC80211_LEDS
-CONFIG_RTL8187_LEDS=y
+export CONFIG_RTL8187_LEDS=y
endif #CONFIG_MAC80211_LEDS
-CONFIG_AT76C50X_USB=m
+export CONFIG_AT76C50X_USB=m
ifndef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_CARL9170=m
+export CONFIG_CARL9170=m
ifdef CONFIG_MAC80211_LEDS
-CONFIG_CARL9170_LEDS=y
+export CONFIG_CARL9170_LEDS=y
endif #CONFIG_MAC80211_LEDS
# CONFIG_CARL9170_DEBUGFS=y
-CONFIG_CARL9170_WPC=y
+export CONFIG_CARL9170_WPC=y
endif #CONFIG_COMPAT_KERNEL_2_6_29
# This activates a threading fix for usb urb.
# this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351
# This fix will be included in some stable releases.
-CONFIG_COMPAT_USB_URB_THREAD_FIX=y
+export CONFIG_COMPAT_USB_URB_THREAD_FIX=y
-CONFIG_ATH9K_HTC=m
+export CONFIG_ATH9K_HTC=m
# CONFIG_ATH9K_HTC_DEBUGFS=y
# RT2500USB does not require firmware
-CONFIG_RT2500USB=m
+export CONFIG_RT2500USB=m
ifdef CONFIG_CRC_CCITT
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT33XX=y
-CONFIG_RT2800USB_RT35XX=y
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_UNKNOWN=y
+export CONFIG_RT2800USB=m
+export CONFIG_RT2800USB_RT33XX=y
+export CONFIG_RT2800USB_RT35XX=y
+export CONFIG_RT2800USB_RT53XX=y
+export CONFIG_RT2800USB_UNKNOWN=y
endif #CONFIG_CRC_CCITT
-CONFIG_RT2X00_LIB_USB=m
+export CONFIG_RT2X00_LIB_USB=m
NEED_RT2X00=y
# RT73USB requires firmware
ifdef CONFIG_CRC_ITU_T
-CONFIG_RT73USB=m
+export CONFIG_RT73USB=m
endif #CONFIG_CRC_ITU_T
ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_THINFIRM_USB=n
-CONFIG_LIBERTAS_USB=n
+export CONFIG_LIBERTAS_THINFIRM_USB=n
+export CONFIG_LIBERTAS_USB=n
NEED_LIBERTAS=n
else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_LIBERTAS_USB=m
+export CONFIG_LIBERTAS_THINFIRM_USB=m
+export CONFIG_LIBERTAS_USB=m
NEED_LIBERTAS=y
endif #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_ORINOCO_USB=m
+export CONFIG_ORINOCO_USB=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_ATH3K=m
+export CONFIG_BT_HCIBTUSB=m
+export CONFIG_BT_HCIBCM203X=m
+export CONFIG_BT_HCIBPA10X=m
+export CONFIG_BT_HCIBFUSB=m
+export CONFIG_BT_ATH3K=m
-CONFIG_RTL8192CU=m
+export CONFIG_RTL8192CU=m
endif #CONFIG_USB end of USB driver list
ifndef CONFIG_COMPAT_KERNEL_2_6_25
ifdef CONFIG_CRC7
-CONFIG_WL1251_SPI=m
-CONFIG_WL12XX_SPI=m
+export CONFIG_WL1251_SPI=m
+export CONFIG_WL12XX_SPI=m
endif #CONFIG_CRC7
-CONFIG_P54_SPI=m
+export CONFIG_P54_SPI=m
ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_SPI=n
+export CONFIG_LIBERTAS_SPI=n
NEED_LIBERTAS=n
else #CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS_SPI=m
+export CONFIG_LIBERTAS_SPI=m
NEED_LIBERTAS=y
endif #CONFIG_COMPAT_KERNEL_2_6_27
ifdef CONFIG_MMC
-CONFIG_SSB_SDIOHOST=y
-CONFIG_B43_SDIO=y
+export CONFIG_SSB_SDIOHOST=y
+export CONFIG_B43_SDIO=y
ifdef CONFIG_CRC7
ifdef CONFIG_WL12XX_PLATFORM_DATA
-CONFIG_COMPAT_WL1251_SDIO=m
+export CONFIG_COMPAT_WL1251_SDIO=m
endif #CONFIG_WL12XX_PLATFORM_DATA
ifndef CONFIG_COMPAT_KERNEL_2_6_32
ifdef CONFIG_WL12XX_PLATFORM_DATA
-CONFIG_COMPAT_WL12XX_SDIO=m
+export CONFIG_COMPAT_WL12XX_SDIO=m
endif #CONFIG_WL12XX_PLATFORM_DATA
endif #CONFIG_COMPAT_KERNEL_2_6_32
endif #CONFIG_CRC7
-CONFIG_MWIFIEX_SDIO=m
+export CONFIG_MWIFIEX_SDIO=m
ifndef CONFIG_COMPAT_KERNEL_2_6_32
-CONFIG_COMPAT_LIBERTAS_SDIO=m
+export CONFIG_COMPAT_LIBERTAS_SDIO=m
NEED_LIBERTAS=y
endif #CONFIG_COMPAT_KERNEL_2_6_32
-CONFIG_IWM=m
+export CONFIG_IWM=m
# CONFIG_IWM_DEBUG=y
# CONFIG_IWM_TRACING=y
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_MRVL_SDIO=m
+export CONFIG_BT_HCIBTSDIO=m
+export CONFIG_BT_MRVL_SDIO=m
ifndef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_ATH6KL=m
+export CONFIG_ATH6KL=m
# CONFIG_ATH6KL_DEBUG=y
endif #CONFIG_COMPAT_KERNEL_2_6_27
ifndef CONFIG_COMPAT_KERNEL_2_6_29
-CONFIG_BRCMFMAC=m
-CONFIG_BRCMFMAC_SDIO=y
+export CONFIG_BRCMFMAC=m
+export CONFIG_BRCMFMAC_SDIO=y
endif #CONFIG_COMPAT_KERNEL_2_6_29
endif #CONFIG_MMC
-CONFIG_RTLWIFI=m
-CONFIG_RTL8192C_COMMON=m
+export CONFIG_RTLWIFI=m
+export CONFIG_RTL8192C_COMMON=m
# Common rt2x00 requirements
ifeq ($(NEED_RT2X00),y)
-CONFIG_RT2X00=y
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2800_LIB=m
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
+export CONFIG_RT2X00=y
+export CONFIG_RT2X00_LIB=m
+export CONFIG_RT2800_LIB=m
+export CONFIG_RT2X00_LIB_FIRMWARE=y
+export CONFIG_RT2X00_LIB_CRYPTO=y
# CONFIG_RT2X00_LIB_SOC=y
ifdef CONFIG_COMPAT_KERNEL_2_6_25
-CONFIG_RT2X00_LIB_LEDS=n
+export CONFIG_RT2X00_LIB_LEDS=n
else #CONFIG_COMPAT_KERNEL_2_6_25
ifdef CONFIG_LEDS_CLASS
-CONFIG_RT2X00_LIB_LEDS=y
+export CONFIG_RT2X00_LIB_LEDS=y
endif #CONFIG_LEDS_CLASS
endif #CONFIG_COMPAT_KERNEL_2_6_25
# CONFIG_RT2X00_DEBUG=y
endif
# p54
-CONFIG_P54_COMMON=m
+export CONFIG_P54_COMMON=m
ifdef CONFIG_MAC80211_LEDS
-CONFIG_P54_LEDS=y
+export CONFIG_P54_LEDS=y
endif #CONFIG_MAC80211_LEDS
# Atheros
-CONFIG_ATH_COMMON=m
+export CONFIG_ATH_COMMON=m
# CONFIG_ATH_DEBUG=y
-CONFIG_BRCMUTIL=m
+export CONFIG_BRCMUTIL=m
# CONFIG_BRCMDBG=y
ifdef CONFIG_CRC7
-CONFIG_WL1251=m
-CONFIG_WL12XX=m
+export CONFIG_WL1251=m
+export CONFIG_WL12XX=m
endif #CONFIG_CRC7
-CONFIG_MWIFIEX=m
+export CONFIG_MWIFIEX=m
ifndef CONFIG_CORDIC
-CONFIG_COMPAT_CORDIC=y
+export CONFIG_COMPAT_CORDIC=y
endif #CONFIG_CORDIC
ifndef CONFIG_CRC8
-CONFIG_COMPAT_CRC8=y
+export CONFIG_COMPAT_CRC8=y
endif #CONFIG_CRC8
ifdef CONFIG_COMPAT_KERNEL_2_6_27
-CONFIG_LIBERTAS=n
+export CONFIG_LIBERTAS=n
else #CONFIG_COMPAT_KERNEL_2_6_27
ifeq ($(NEED_LIBERTAS),y)
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_MESH=y
+export CONFIG_LIBERTAS_THINFIRM=m
+export CONFIG_LIBERTAS=m
+export CONFIG_LIBERTAS_MESH=y
# CONFIG_LIBERTAS_DEBUG=y
endif
endif #CONFIG_COMPAT_KERNEL_2_6_27
# We need the backported rfkill module on kernel < 2.6.31.
# In more recent kernel versions use the in kernel rfkill module.
ifdef CONFIG_COMPAT_KERNEL_2_6_31
-CONFIG_RFKILL_BACKPORT=m
+export CONFIG_RFKILL_BACKPORT=m
ifdef CONFIG_LEDS_TRIGGERS
-CONFIG_RFKILL_BACKPORT_LEDS=y
+export CONFIG_RFKILL_BACKPORT_LEDS=y
endif #CONFIG_LEDS_TRIGGERS
-CONFIG_RFKILL_BACKPORT_INPUT=y
+export CONFIG_RFKILL_BACKPORT_INPUT=y
endif #CONFIG_COMPAT_KERNEL_2_6_31
projects / openwrt / staging / blogic.git / commitdiff