tg3: Move TSO_CAPABLE assignment

This patch moves the code that asserts the TSO_CAPABLE flag closer to
where the TSO capabilities flags are set.  There isn't a good enough
reason for the code to be separated.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 574fe9785f3c96f65437238f8ad185a858c4ecc5..09fe0678443225a0953ebebe6d23441adc3e4e2e 100644 (file)
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -13639,6 +13639,21 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
                        tp->fw_needed = FIRMWARE_TG3TSO;
        }
 
+       /* Selectively allow TSO based on operating conditions */
+       if ((tg3_flag(tp, HW_TSO_1) ||
+            tg3_flag(tp, HW_TSO_2) ||
+            tg3_flag(tp, HW_TSO_3)) ||
+           (tp->fw_needed && !tg3_flag(tp, ENABLE_ASF)))
+               tg3_flag_set(tp, TSO_CAPABLE);
+       else {
+               tg3_flag_clear(tp, TSO_CAPABLE);
+               tg3_flag_clear(tp, TSO_BUG);
+               tp->fw_needed = NULL;
+       }
+
+       if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
+               tp->fw_needed = FIRMWARE_TG3;
+
        tp->irq_max = 1;
 
        if (tg3_flag(tp, 5750_PLUS)) {
@@ -13705,6 +13720,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
                if (lnkctl & PCI_EXP_LNKCTL_CLKREQ_EN) {
                        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
                                tg3_flag_clear(tp, HW_TSO_2);
+                               tg3_flag_clear(tp, TSO_CAPABLE);
                        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
                            GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
                            tp->pci_chip_rev_id == CHIPREV_ID_57780_A0 ||
@@ -15044,21 +15060,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 
        tg3_init_bufmgr_config(tp);
 
-       /* Selectively allow TSO based on operating conditions */
-       if ((tg3_flag(tp, HW_TSO_1) ||
-            tg3_flag(tp, HW_TSO_2) ||
-            tg3_flag(tp, HW_TSO_3)) ||
-           (tp->fw_needed && !tg3_flag(tp, ENABLE_ASF)))
-               tg3_flag_set(tp, TSO_CAPABLE);
-       else {
-               tg3_flag_clear(tp, TSO_CAPABLE);
-               tg3_flag_clear(tp, TSO_BUG);
-               tp->fw_needed = NULL;
-       }
-
-       if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0)
-               tp->fw_needed = FIRMWARE_TG3;
-
        /* TSO is on by default on chips that support hardware TSO.
         * Firmware TSO on older chips gives lower performance, so it
         * is off by default, but can be enabled using ethtool.