CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_BCM63XX_FW=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
compatible = "pirelli,a226g", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "pirelli,a226m-fwb", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xfc0000>;
};
compatible = "pirelli,a226m", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "adb,a4001n", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7e0000>;
- label = "linux";
+ label = "firmware";
};
nvram@7f0000 {
compatible = "adb,a4001n1", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0xfe0000>;
- label = "linux";
+ label = "firmware";
};
nvram@ff0000 {
compatible = "pirelli,agpf-s0", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xfc0000>;
};
compatible = "comtrend,ar-5381u", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0xfe0000>;
- label = "linux";
+ label = "firmware";
};
nvram@ff0000 {
compatible = "comtrend,ar-5387un", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0xfe0000>;
- label = "linux";
+ label = "firmware";
};
nvram@ff0000 {
compatible = "asmax,ar1004g", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "adb,av4202n", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x010000 0xfe0000>;
};
compatible = "telsey,cpva502+", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "telsey,cpva642", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "comtrend,ct-5365", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "comtrend,ct-6373", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
spi-gpio {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "comtrend,ct-536+", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "netgear,cvg834g", "brcm,bcm3368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "netgear,dg834g-v4", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "netgear,dg834gtpn", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "netgear,dgnd3700v1", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0x1e20000>;
};
compatible = "d-link,dsl-2640b-b", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "d-link,dsl-2640u", "brcm,bcm6338";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "d-link,dsl-2650u", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "d-link,dsl-274xb-c2", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "d-link,dsl-274xb-f", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7c0000>;
- label = "linux";
+ label = "firmware";
};
cal_data@7d0000 {
compatible = "d-link,dsl-275xb-d", "brcm,bcm6318";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7e0000>;
- label = "linux";
+ label = "firmware";
};
nvram@7f0000 {
compatible = "davolink,dv-201amr", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
};
read-only;
};
- linux@410000 {
- label = "linux";
+ firmware@410000 {
+ label = "firmware";
reg = <0x410000 0x3f0000>;
};
};
compatible = "d-link,dva-g3810bn/tl", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "netgear,evg2000", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x00000000 0x00020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x00020000 0x00f40000>;
};
compatible = "belkin,f5d7633", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0x3c0000>;
};
compatible = "sagem,f@st2404", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
};
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "sagem,f@st2504n", "brcm,bcm6362";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7e0000>;
- label = "linux";
+ label = "firmware";
};
nvram@7f0000 {
compatible = "sagem,f@st2604", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "sagem,f@st2704n", "brcm,bcm6318";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7e0000>;
- label = "linux";
+ label = "firmware";
};
nvram@7f0000 {
compatible = "sagem,f@st2704v2", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7e0000>;
- label = "linux";
+ label = "firmware";
};
nvram@7f0000 {
compatible = "tecom,gw6000", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "tecom,gw6200", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "huawei,hg520v", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "huawei,hg553", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xfc0000>;
};
compatible = "huawei,hg556a-a", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xec0000>;
};
compatible = "huawei,hg556a-b", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xec0000>;
};
compatible = "huawei,hg556a-c", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xec0000>;
};
compatible = "huawei,hg622", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xf80000>;
};
compatible = "huawei,hg655b", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0x770000>;
};
compatible = "thomson,homehub2a", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
spi-gpio {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xfc0000>;
};
compatible = "telsey,magic", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "sfr,nb6-ser-r0", "brcm,bcm6362";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0xfe0000>;
- label = "linux";
+ label = "firmware";
};
nvram@ff0000 {
compatible = "zyxel,p870hw-51a-v2", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "nucom,r5010unv2", "brcm,bcm6328";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
#address-cells = <1>;
#size-cells = <1>;
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
- linux@10000 {
+ firmware@10000 {
reg = <0x010000 0x7e0000>;
- label = "linux";
+ label = "firmware";
};
nvram@7f0000 {
compatible = "alcatel,rg100a", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0xfc0000>;
};
compatible = "dynalink,rta1025w", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
};
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "dynalink,rta1320", "brcm,bcm6338";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "dynalink,rta770bw", "brcm,bcm6345";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "dynalink,rta770w", "brcm,bcm6345";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "t-com,spw303v", "brcm,bcm6358";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "t-com,spw500v", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "tp-link,td-w8900gb", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x020000 0x3d0000>;
};
compatible = "usr,9108", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "bt,v2110", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "bt,v2500v-bb", "brcm,bcm6348";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x3e0000>;
};
compatible = "observa,vh4032n", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x0000000 0x0020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x0020000 0x1fc0000>;
};
compatible = "comtrend,vr-3025u", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x0000000 0x0020000>;
read-only;
};
- linux@20000 {
- label = "linux";
+ firmware@20000 {
+ label = "firmware";
reg = <0x0020000 0x1fc0000>;
};
compatible = "comtrend,vr-3025un", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "comtrend,vr-3026e", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};
compatible = "comtrend,wap-5813n", "brcm,bcm6368";
chosen {
- bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
&pflash {
status = "ok";
- linux,part-probe = "bcm63xxpart";
-
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
- linux@10000 {
- label = "linux";
+ firmware@10000 {
+ label = "firmware";
reg = <0x010000 0x7e0000>;
};