LINUX_VERSION-3.18 = .21
LINUX_VERSION-4.0 = .9
-LINUX_VERSION-4.1 = .10
+LINUX_VERSION-4.1 = .11
LINUX_VERSION-4.3 = -rc7
LINUX_KERNEL_MD5SUM-3.18.21 = e4248caaa4cef318c04657e971b37298
LINUX_KERNEL_MD5SUM-4.0.9 = 40fc5f6e2d718e539b45e6601c71985b
-LINUX_KERNEL_MD5SUM-4.1.10 = 16953359a8c245d478294af65fd756a8
+LINUX_KERNEL_MD5SUM-4.1.11 = 63e5981e38f935772a5309289fe76972
LINUX_KERNEL_MD5SUM-4.3-rc7 = b33f9c9c1a597bb8e0d6f84c074e733f
ifdef KERNEL_PATCHVER
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -339,6 +339,13 @@ configured less than Maximum supported f
- UART_FCR7_64BYTE,
+@@ -347,6 +347,13 @@ configured less than Maximum supported f
+ .rxtrig_bytes = {1, 4, 8, 14},
.flags = UART_CAP_FIFO,
},
+ [PORT_AR7] = {
};
/* Uart divisor latch read */
-@@ -3340,7 +3347,11 @@ static void serial8250_console_putchar(s
+@@ -3348,7 +3355,11 @@ static void serial8250_console_putchar(s
{
struct uart_8250_port *up = up_to_u8250p(port);
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -64,6 +64,7 @@ enum ath79_mach_type {
- ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
- ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
- ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
+@@ -69,6 +69,7 @@ enum ath79_mach_type {
+ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
+ ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
+ ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
+ ATH79_MACH_GS_MINIBOX_V1, /* Gainstrong MiniBox V1.0 */
- ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
- ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
+ ATH79_MACH_GS_OOLITE, /* GS OOLITE V1.0 */
+ ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
+ ATH79_MACH_JA76PF, /* jjPlus JA76PF */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
-@@ -511,6 +511,16 @@
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
+@@ -556,6 +556,16 @@ config ATH79_MACH_EAP300V2
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
+config ATH79_MACH_GS_MINIBOX_V1
+ bool "Gainstrong MiniBox V1.0 support"
+ select SOC_AR933X
config ATH79_MACH_GS_OOLITE
bool "GS Oolite V1 support"
select SOC_AR933X
---- a/arch/mips/ath79/Makefile 2015-08-10 23:27:44.599500173 +0200
-+++ b/arch/mips/ath79/Makefile 2015-08-10 23:29:25.090929262 +0200
-@@ -75,6 +75,7 @@
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -80,6 +80,7 @@ obj-$(CONFIG_ATH79_MACH_EPG5000) += mach
obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
-@@ -904,6 +904,16 @@ config ATH79_MACH_EAP7660D
+@@ -914,6 +914,16 @@ config ATH79_MACH_EAP7660D
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
-@@ -1053,6 +1053,17 @@ config ATH79_MACH_TL_WDR4300
+@@ -1063,6 +1063,17 @@ config ATH79_MACH_TL_WDR4300
select ATH79_DEV_USB
select ATH79_DEV_WMAC
select SOC_AR933X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -155,6 +155,7 @@ enum ath79_mach_type {
+@@ -156,6 +156,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += m
+@@ -132,6 +132,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += m
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
-@@ -900,6 +900,16 @@ config ATH79_MACH_CAP4200AG
+@@ -910,6 +910,16 @@ config ATH79_MACH_CAP4200AG
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
select SOC_QCA955X
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -91,6 +91,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += ma
+@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += ma
obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o
obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -80,6 +80,7 @@ enum ath79_mach_type {
+@@ -81,6 +81,7 @@ enum ath79_mach_type {
ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
ATH79_MACH_MR12, /* Cisco Meraki MR12 */
ATH79_MACH_MR16, /* Cisco Meraki MR16 */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
-@@ -1055,6 +1055,17 @@ config ATH79_MACH_TL_WA901ND_V2
+@@ -1065,6 +1065,17 @@ config ATH79_MACH_TL_WA901ND_V2
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
select SOC_AR934X
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
-@@ -155,6 +155,7 @@ enum ath79_mach_type {
+@@ -156,6 +156,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
-@@ -131,6 +131,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) +
+@@ -132,6 +132,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) +
obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
/*
* Set the run bit and wait for the host to be running.
*/
-@@ -556,10 +589,25 @@ int xhci_init(struct usb_hcd *hcd)
+@@ -557,10 +590,25 @@ int xhci_init(struct usb_hcd *hcd)
static int xhci_run_finished(struct xhci_hcd *xhci)
{
xhci->shared_hcd->state = HC_STATE_RUNNING;
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-@@ -569,6 +617,9 @@ static int xhci_run_finished(struct xhci
+@@ -570,6 +618,9 @@ static int xhci_run_finished(struct xhci
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB3 roothub");
return 0;
config DEBUG_AT91_UART
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
-@@ -147,6 +147,8 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080
+@@ -155,6 +155,8 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
--- a/sound/arm/Kconfig
+++ b/sound/arm/Kconfig
-@@ -39,5 +39,13 @@ config SND_PXA2XX_AC97
+@@ -40,5 +40,13 @@ config SND_PXA2XX_AC97
Say Y or M if you want to support any AC97 codec attached to
the PXA2xx AC97 interface.
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -3262,6 +3262,8 @@ static void __init serial8250_isa_init_p
+@@ -3270,6 +3270,8 @@ static void __init serial8250_isa_init_p
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
-@@ -706,6 +706,7 @@ static struct class *spidev_class;
+@@ -707,6 +707,7 @@ static struct class *spidev_class;
#ifdef CONFIG_OF
static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "rohm,dh2228fv" },
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
-index d79e33b..686334f 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -157,6 +157,7 @@ enum {
unsigned rx_buf_sz;
unsigned wol_enabled : 1; /* Is Wake-on-LAN enabled? */
-@@ -665,7 +667,7 @@ static void cp_tx (struct cp_private *cp)
+@@ -665,7 +667,7 @@ static void cp_tx (struct cp_private *cp
BUG_ON(!skb);
dma_unmap_single(&cp->pdev->dev, le64_to_cpu(txd->addr),
PCI_DMA_TODEVICE);
if (status & LastFrag) {
-@@ -733,7 +735,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -733,7 +735,7 @@ static netdev_tx_t cp_start_xmit (struct
{
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
unsigned long intr_flags;
__le32 opts2;
int mss = 0;
-@@ -753,6 +755,21 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -753,6 +755,21 @@ static netdev_tx_t cp_start_xmit (struct
mss = skb_shinfo(skb)->gso_size;
opts2 = cpu_to_le32(cp_tx_vlan_tag(skb));
if (skb_shinfo(skb)->nr_frags == 0) {
struct cp_desc *txd = &cp->tx_ring[entry];
-@@ -768,31 +785,20 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -768,31 +785,20 @@ static netdev_tx_t cp_start_xmit (struct
txd->addr = cpu_to_le64(mapping);
wmb();
/* We must give this initial chunk to the device last.
* Otherwise we could race with the device.
-@@ -805,14 +811,14 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -805,14 +811,14 @@ static netdev_tx_t cp_start_xmit (struct
goto out_dma_error;
cp->tx_skb[entry] = skb;
len = skb_frag_size(this_frag);
mapping = dma_map_single(&cp->pdev->dev,
skb_frag_address(this_frag),
-@@ -824,19 +830,7 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -824,19 +830,7 @@ static netdev_tx_t cp_start_xmit (struct
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
if (frag == skb_shinfo(skb)->nr_frags - 1)
ctrl |= LastFrag;
-@@ -849,8 +843,8 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -849,8 +843,8 @@ static netdev_tx_t cp_start_xmit (struct
txd->opts1 = cpu_to_le32(ctrl);
wmb();
}
txd = &cp->tx_ring[first_entry];
-@@ -858,27 +852,17 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -858,27 +852,17 @@ static netdev_tx_t cp_start_xmit (struct
txd->addr = cpu_to_le64(first_mapping);
wmb();
if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
-@@ -1115,6 +1099,7 @@ static int cp_init_rings (struct cp_private *cp)
+@@ -1115,6 +1099,7 @@ static int cp_init_rings (struct cp_priv
{
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
cp_init_rings_index(cp);
-@@ -1151,7 +1136,7 @@ static void cp_clean_rings (struct cp_private *cp)
+@@ -1151,7 +1136,7 @@ static void cp_clean_rings (struct cp_pr
desc = cp->rx_ring + i;
dma_unmap_single(&cp->pdev->dev,le64_to_cpu(desc->addr),
cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
}
}
-@@ -1164,7 +1149,7 @@ static void cp_clean_rings (struct cp_private *cp)
+@@ -1164,7 +1149,7 @@ static void cp_clean_rings (struct cp_pr
le32_to_cpu(desc->opts1) & 0xffff,
PCI_DMA_TODEVICE);
if (le32_to_cpu(desc->opts1) & LastFrag)
cp->dev->stats.tx_dropped++;
}
}
-@@ -1172,6 +1157,7 @@ static void cp_clean_rings (struct cp_private *cp)
+@@ -1172,6 +1157,7 @@ static void cp_clean_rings (struct cp_pr
memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
memset(cp->rx_skb, 0, sizeof(struct sk_buff *) * CP_RX_RING_SIZE);
memset(cp->tx_skb, 0, sizeof(struct sk_buff *) * CP_TX_RING_SIZE);
-@@ -1249,7 +1235,7 @@ static void cp_tx_timeout(struct net_device *dev)
+@@ -1249,7 +1235,7 @@ static void cp_tx_timeout(struct net_dev
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
netdev_warn(dev, "Transmit timeout, status %2x %4x %4x %4x\n",
cpr8(Cmd), cpr16(CpCmd),
-@@ -1257,13 +1243,26 @@ static void cp_tx_timeout(struct net_device *dev)
+@@ -1257,13 +1243,26 @@ static void cp_tx_timeout(struct net_dev
spin_lock_irqsave(&cp->lock, flags);
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c
-index 686334f..deae10d 100644
--- a/drivers/net/ethernet/realtek/8139cp.c
+++ b/drivers/net/ethernet/realtek/8139cp.c
@@ -175,7 +175,7 @@ enum {
TxError = (1 << 23), /* Tx error summary */
RxError = (1 << 20), /* Rx error summary */
IPCS = (1 << 18), /* Calculate IP checksum */
-@@ -754,10 +754,16 @@ static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
+@@ -754,10 +754,16 @@ static netdev_tx_t cp_start_xmit (struct
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
mss = skb_shinfo(skb)->gso_size;
else if (skb->ip_summed == CHECKSUM_PARTIAL) {
const struct iphdr *ip = ip_hdr(skb);
if (ip->protocol == IPPROTO_TCP)
-@@ -1852,6 +1858,15 @@ static void cp_set_d3_state (struct cp_private *cp)
+@@ -1852,6 +1858,15 @@ static void cp_set_d3_state (struct cp_p
pci_set_power_state (cp->pdev, PCI_D3hot);
}
static const struct net_device_ops cp_netdev_ops = {
.ndo_open = cp_open,
.ndo_stop = cp_close,
-@@ -1864,6 +1879,7 @@ static const struct net_device_ops cp_netdev_ops = {
+@@ -1864,6 +1879,7 @@ static const struct net_device_ops cp_ne
.ndo_tx_timeout = cp_tx_timeout,
.ndo_set_features = cp_set_features,
.ndo_change_mtu = cp_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = cp_poll_controller,
-@@ -1983,12 +1999,12 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+@@ -1983,12 +1999,12 @@ static int cp_init_one (struct pci_dev *
dev->ethtool_ops = &cp_ethtool_ops;
dev->watchdog_timeo = TX_TIMEOUT;
/* The Mellanox Tavor device gives false positive parity errors
* Mark this device with a broken_parity_status, to allow
* PCI scanning code to "skip" this now blacklisted device.
-@@ -2949,6 +2950,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -2965,6 +2966,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
/*
* Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To
-@@ -3005,6 +3007,8 @@ static void fixup_debug_report(struct pc
+@@ -3021,6 +3023,8 @@ static void fixup_debug_report(struct pc
}
}
/*
* Some BIOS implementations leave the Intel GPU interrupts enabled,
* even though no one is handling them (f.e. i915 driver is never loaded).
-@@ -3039,6 +3043,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3055,6 +3059,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
}
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
-@@ -325,6 +325,9 @@ void register_irq_proc(unsigned int irq,
- {
+@@ -327,6 +327,9 @@ void register_irq_proc(unsigned int irq,
+ static DEFINE_MUTEX(register_lock);
char name [MAX_NAMELEN];
+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
+ return;
+
- if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip) || desc->dir)
+ if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
return;
-@@ -361,6 +364,9 @@ void unregister_irq_proc(unsigned int ir
+@@ -376,6 +379,9 @@ void unregister_irq_proc(unsigned int ir
{
char name [MAX_NAMELEN];
if (!root_irq_dir || !desc->dir)
return;
#ifdef CONFIG_SMP
-@@ -396,6 +402,9 @@ void init_irq_proc(void)
+@@ -411,6 +417,9 @@ void init_irq_proc(void)
unsigned int irq;
struct irq_desc *desc;
endif
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
-@@ -2649,6 +2649,7 @@ enum {
+@@ -2647,6 +2647,7 @@ enum {
DIO_SKIP_DIO_COUNT = 0x08,
};
void dio_end_io(struct bio *bio, int error);
ssize_t __blockdev_direct_IO(struct kiocb *iocb, struct inode *inode,
-@@ -2656,6 +2657,18 @@ ssize_t __blockdev_direct_IO(struct kioc
+@@ -2654,6 +2655,18 @@ ssize_t __blockdev_direct_IO(struct kioc
loff_t offset, get_block_t get_block,
dio_iodone_t end_io, dio_submit_t submit_io,
int flags);
select GENERIC_CLOCKEVENTS
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
-@@ -240,9 +240,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
+@@ -248,9 +248,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
else
MACHINE :=
endif
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -438,6 +438,20 @@ static void mem_serial_out(struct uart_p
+@@ -446,6 +446,20 @@ static void mem_serial_out(struct uart_p
writeb(value, p->membase + offset);
}
static void mem32_serial_out(struct uart_port *p, int offset, int value)
{
offset = offset << p->regshift;
-@@ -505,6 +519,11 @@ static void set_io_from_upio(struct uart
+@@ -513,6 +527,11 @@ static void set_io_from_upio(struct uart
p->serial_out = mem32be_serial_out;
break;
#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
case UPIO_AU:
p->serial_in = au_serial_in;
-@@ -531,6 +550,7 @@ serial_port_out_sync(struct uart_port *p
+@@ -539,6 +558,7 @@ serial_port_out_sync(struct uart_port *p
case UPIO_MEM:
case UPIO_MEM32:
case UPIO_MEM32BE:
case UPIO_AU:
p->serial_out(p, offset, value);
p->serial_in(p, UART_LCR); /* safe, no side-effects */
-@@ -2768,6 +2788,7 @@ static int serial8250_request_std_resour
+@@ -2776,6 +2796,7 @@ static int serial8250_request_std_resour
case UPIO_MEM32:
case UPIO_MEM32BE:
case UPIO_MEM:
if (!port->mapbase)
break;
-@@ -2805,6 +2826,7 @@ static void serial8250_release_std_resou
+@@ -2813,6 +2834,7 @@ static void serial8250_release_std_resou
case UPIO_MEM32:
case UPIO_MEM32BE:
case UPIO_MEM:
if (!port->mapbase)
break;
-@@ -3693,6 +3715,7 @@ static int serial8250_probe(struct platf
+@@ -3701,6 +3723,7 @@ static int serial8250_probe(struct platf
uart.port.set_termios = p->set_termios;
uart.port.pm = p->pm;
uart.port.dev = &dev->dev;
uart.port.irqflags |= irqflag;
ret = serial8250_register_8250_port(&uart);
if (ret < 0) {
-@@ -3849,6 +3872,7 @@ int serial8250_register_8250_port(struct
+@@ -3857,6 +3880,7 @@ int serial8250_register_8250_port(struct
uart->bugs = up->bugs;
uart->port.mapbase = up->port.mapbase;
uart->port.mapsize = up->port.mapsize;
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -626,6 +626,14 @@
+@@ -626,6 +626,14 @@ config SPI_NUC900
help
SPI driver for Nuvoton NUC900 series ARM SoCs
#
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -90,3 +90,4 @@
+@@ -90,3 +90,4 @@ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
source "arch/arm/mach-pxa/Kconfig"
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
-@@ -187,6 +187,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire
+@@ -195,6 +195,7 @@ machine-$(CONFIG_ARCH_NSPIRE) += nspire
machine-$(CONFIG_ARCH_OMAP1) += omap1
machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
machine-$(CONFIG_ARCH_ORION5X) += orion5x
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -202,6 +202,23 @@ struct sunxi_nand_hw_ecc {
+@@ -206,6 +206,23 @@ struct sunxi_nand_hw_ecc {
};
/*
* NAND chip structure: stores NAND chip device related information
*
* @node: used to store NAND chips into a list
-@@ -521,7 +538,7 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -525,7 +542,7 @@ static int sunxi_nfc_hw_ecc_read_page(st
int oob_required, int page)
{
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
struct nand_ecclayout *layout = ecc->layout;
struct sunxi_nand_hw_ecc *data = ecc->priv;
unsigned int max_bitflips = 0;
-@@ -607,7 +624,7 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -611,7 +628,7 @@ static int sunxi_nfc_hw_ecc_write_page(s
const uint8_t *buf, int oob_required)
{
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
struct nand_ecclayout *layout = ecc->layout;
struct sunxi_nand_hw_ecc *data = ecc->priv;
int offset;
-@@ -681,7 +698,7 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
+@@ -679,7 +696,7 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
int page)
{
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
struct sunxi_nand_hw_ecc *data = ecc->priv;
unsigned int max_bitflips = 0;
uint8_t *oob = chip->oob_poi;
-@@ -749,7 +766,7 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
+@@ -747,7 +764,7 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
int oob_required)
{
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
struct sunxi_nand_hw_ecc *data = ecc->priv;
uint8_t *oob = chip->oob_poi;
int offset = 0;
-@@ -1099,8 +1116,13 @@ static int sunxi_nand_ecc_init(struct mt
+@@ -1091,8 +1108,13 @@ static int sunxi_nand_ecc_init(struct mt
ecc->strength = nand->ecc_strength_ds;
}
ecc->mode = NAND_ECC_HW;
-@@ -1135,12 +1157,39 @@ static int sunxi_nand_ecc_init(struct mt
+@@ -1127,12 +1149,39 @@ static int sunxi_nand_ecc_init(struct mt
return 0;
}
struct mtd_info *mtd;
struct nand_chip *nand;
int nsels;
-@@ -1269,8 +1318,14 @@ static int sunxi_nand_chip_init(struct d
+@@ -1261,8 +1310,14 @@ static int sunxi_nand_chip_init(struct d
return ret;
}
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -206,10 +206,12 @@ struct sunxi_nand_hw_ecc {
+@@ -210,10 +210,12 @@ struct sunxi_nand_hw_ecc {
*
* @part: base paritition structure
* @ecc: per-partition ECC info
};
static inline struct sunxi_nand_part *
-@@ -219,6 +221,29 @@ to_sunxi_nand_part(struct nand_part *par
+@@ -223,6 +225,29 @@ to_sunxi_nand_part(struct nand_part *par
}
/*
* NAND chip structure: stores NAND chip device related information
*
* @node: used to store NAND chips into a list
-@@ -233,6 +258,7 @@ struct sunxi_nand_chip {
+@@ -237,6 +262,7 @@ struct sunxi_nand_chip {
struct list_head node;
struct nand_chip nand;
struct mtd_info mtd;
unsigned long clk_rate;
int selected;
int nsels;
-@@ -489,6 +515,185 @@ static void sunxi_nfc_write_buf(struct m
+@@ -493,6 +519,185 @@ static void sunxi_nfc_write_buf(struct m
}
}
static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd)
{
uint8_t ret;
-@@ -538,16 +743,43 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -542,16 +747,43 @@ static int sunxi_nfc_hw_ecc_read_page(st
int oob_required, int page)
{
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
-@@ -556,12 +788,15 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -560,12 +792,15 @@ static int sunxi_nfc_hw_ecc_read_page(st
writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
for (i = 0; i < ecc->steps; i++) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
-@@ -569,6 +804,25 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -573,6 +808,25 @@ static int sunxi_nfc_hw_ecc_read_page(st
if (ret)
return ret;
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30);
writel(tmp, nfc->regs + NFC_REG_CMD);
-@@ -579,6 +833,9 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -583,6 +837,9 @@ static int sunxi_nfc_hw_ecc_read_page(st
memcpy_fromio(buf + (i * ecc->size),
nfc->regs + NFC_RAM0_BASE, ecc->size);
if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) {
mtd->ecc_stats.failed++;
} else {
-@@ -594,9 +851,10 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -598,9 +855,10 @@ static int sunxi_nfc_hw_ecc_read_page(st
if (ret)
return ret;
}
}
-@@ -606,11 +864,14 @@ static int sunxi_nfc_hw_ecc_read_page(st
+@@ -610,11 +868,14 @@ static int sunxi_nfc_hw_ecc_read_page(st
offset = mtd->writesize +
ecc->layout->oobfree[ecc->steps].offset;
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
tmp &= ~NFC_ECC_EN;
-@@ -627,6 +888,7 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -631,6 +892,7 @@ static int sunxi_nfc_hw_ecc_write_page(s
struct nand_ecc_ctrl *ecc = chip->cur_ecc;
struct nand_ecclayout *layout = ecc->layout;
struct sunxi_nand_hw_ecc *data = ecc->priv;
int offset;
int ret;
u32 tmp;
-@@ -641,22 +903,56 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -645,17 +907,57 @@ static int sunxi_nfc_hw_ecc_write_page(s
writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
for (i = 0; i < ecc->steps; i++) {
offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
/* Fill OOB data in */
-- if (oob_required) {
-- tmp = 0xffffffff;
-- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
-- 4);
+- writel(NFC_BUF_TO_USER_DATA(chip->oob_poi +
+- layout->oobfree[i].offset),
+- nfc->regs + NFC_REG_USER_DATA_BASE);
+ if (!oob_required)
+ memset(oob_buf, 0xff, 4);
+ else
+ nand_rnd_is_activ(mtd, -1, offset, &cnt) > 0 &&
+ cnt == ecc->bytes + 4)
+ rndactiv = true;
- } else {
-- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE,
-- chip->oob_poi + offset - mtd->writesize,
-- 4);
++ } else {
+ cnt = ecc->bytes + 2;
+ if (rnd &&
+ nand_rnd_is_activ(mtd, -1, offset + 2, &cnt) > 0 &&
+ tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION);
+ tmp |= NFC_RANDOM_EN;
+ writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
- }
++ }
chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
-@@ -671,6 +967,9 @@ static int sunxi_nfc_hw_ecc_write_page(s
+
+@@ -669,6 +971,9 @@ static int sunxi_nfc_hw_ecc_write_page(s
ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
if (ret)
return ret;
}
if (oob_required) {
-@@ -679,11 +978,14 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -677,11 +982,14 @@ static int sunxi_nfc_hw_ecc_write_page(s
offset = mtd->writesize +
ecc->layout->oobfree[i].offset;
chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
tmp &= ~NFC_ECC_EN;
-@@ -692,22 +994,76 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -690,22 +998,76 @@ static int sunxi_nfc_hw_ecc_write_page(s
return 0;
}
tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
tmp &= ~(NFC_ECC_MODE | NFC_ECC_PIPELINE | NFC_ECC_BLOCK_SIZE);
tmp |= NFC_ECC_EN | (data->mode << NFC_ECC_MODE_SHIFT) |
-@@ -716,7 +1072,17 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
+@@ -714,7 +1076,17 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
for (i = 0; i < ecc->steps; i++) {
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | (1 << 30);
writel(tmp, nfc->regs + NFC_REG_CMD);
-@@ -729,6 +1095,9 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
+@@ -727,6 +1099,9 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
buf += ecc->size;
offset += ecc->size;
if (readl(nfc->regs + NFC_REG_ECC_ST) & 0x1) {
mtd->ecc_stats.failed++;
} else {
-@@ -739,7 +1108,8 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
+@@ -737,7 +1112,8 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
if (oob_required) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
oob += ecc->bytes + ecc->prepad;
}
-@@ -750,10 +1120,13 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
+@@ -748,10 +1124,13 @@ static int sunxi_nfc_hw_syndrome_ecc_rea
cnt = mtd->oobsize - (oob - chip->oob_poi);
if (cnt > 0) {
chip->cmdfunc(mtd, NAND_CMD_RNDOUT, offset, -1);
writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN,
nfc->regs + NFC_REG_ECC_CTL);
-@@ -768,6 +1141,7 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
+@@ -766,6 +1145,7 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
struct sunxi_nfc *nfc = to_sunxi_nfc(chip->controller);
struct nand_ecc_ctrl *ecc = chip->cur_ecc;
struct sunxi_nand_hw_ecc *data = ecc->priv;
uint8_t *oob = chip->oob_poi;
int offset = 0;
int ret;
-@@ -783,7 +1157,8 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
+@@ -781,13 +1161,24 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
for (i = 0; i < ecc->steps; i++) {
offset += ecc->size;
/* Fill OOB data in */
-@@ -796,6 +1171,16 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
- 4);
- }
+ writel(NFC_BUF_TO_USER_DATA(oob),
+ nfc->regs + NFC_REG_USER_DATA_BASE);
+ cnt = ecc->bytes + 4;
+ if (rnd &&
tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ACCESS_DIR |
(1 << 30);
writel(tmp, nfc->regs + NFC_REG_CMD);
-@@ -804,6 +1189,9 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
+@@ -796,6 +1187,9 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
if (ret)
return ret;
offset += ecc->bytes + ecc->prepad;
oob += ecc->bytes + ecc->prepad;
}
-@@ -812,9 +1200,11 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
+@@ -804,9 +1198,11 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
cnt = mtd->oobsize - (oob - chip->oob_poi);
if (cnt > 0) {
chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
tmp &= ~NFC_ECC_EN;
-@@ -824,6 +1214,128 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
+@@ -816,6 +1212,128 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
return 0;
}
static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
const struct nand_sdr_timings *timings)
{
-@@ -1084,6 +1596,40 @@ static int sunxi_nand_hw_syndrome_ecc_ct
+@@ -1076,6 +1594,40 @@ static int sunxi_nand_hw_syndrome_ecc_ct
return 0;
}
static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
{
switch (ecc->mode) {
-@@ -1175,7 +1721,14 @@ struct nand_part *sunxi_ofnandpart_parse
+@@ -1167,7 +1719,14 @@ struct nand_part *sunxi_ofnandpart_parse
if (ret)
goto err;
return &part->part;
-@@ -1300,18 +1853,30 @@ static int sunxi_nand_chip_init(struct d
+@@ -1292,18 +1851,30 @@ static int sunxi_nand_chip_init(struct d
if (ret)
return ret;
ret = nand_scan_tail(mtd);
if (ret) {
dev_err(dev, "nand_scan_tail failed: %d\n", ret);
-@@ -1367,6 +1932,8 @@ static void sunxi_nand_chips_cleanup(str
- node);
+@@ -1360,6 +1931,8 @@ static void sunxi_nand_chips_cleanup(str
nand_release(&chip->mtd);
sunxi_nand_ecc_cleanup(&chip->nand.ecc);
+ list_del(&chip->node);
+ sunxi_nand_rnd_cleanup(&chip->nand.rnd);
+ kfree(chip->buffer);
}
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -1711,28 +1711,37 @@ static void sunxi_nand_part_release(stru
+@@ -1709,28 +1709,37 @@ static void sunxi_nand_part_release(stru
struct nand_part *sunxi_ofnandpart_parse(void *priv, struct mtd_info *master,
struct device_node *pp)
{
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -1853,6 +1853,15 @@ static int sunxi_nand_chip_init(struct d
+@@ -1851,6 +1851,15 @@ static int sunxi_nand_chip_init(struct d
if (of_get_nand_on_flash_bbt(np))
nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -1427,7 +1427,7 @@ static int sunxi_nand_chip_init_timings(
+@@ -1425,7 +1425,7 @@ static int sunxi_nand_chip_init_timings(
mode = onfi_get_async_timing_mode(&chip->nand);
if (mode == ONFI_TIMING_MODE_UNKNOWN) {
} else {
uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
-@@ -1441,9 +1441,10 @@ static int sunxi_nand_chip_init_timings(
+@@ -1439,9 +1439,10 @@ static int sunxi_nand_chip_init_timings(
feature);
if (ret)
return ret;
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -904,7 +904,7 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -908,7 +908,7 @@ static int sunxi_nfc_hw_ecc_write_page(s
for (i = 0; i < ecc->steps; i++) {
bool rndactiv = false;
if (i)
chip->cmdfunc(mtd, NAND_CMD_RNDIN, i * ecc->size, -1);
-@@ -915,15 +915,13 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -919,15 +919,13 @@ static int sunxi_nfc_hw_ecc_write_page(s
offset = layout->eccpos[i * ecc->bytes] - 4 + mtd->writesize;
/* Fill OOB data in */
if (i) {
cnt = ecc->bytes + 4;
-@@ -942,12 +940,16 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -946,12 +944,16 @@ static int sunxi_nfc_hw_ecc_write_page(s
if (rndactiv) {
/* pre randomize to generate FF patterns on the NAND */
if (!i) {
}
tmp = readl(nfc->regs + NFC_REG_ECC_CTL);
tmp &= ~(NFC_RANDOM_DIRECTION | NFC_ECC_EXCEPTION);
-@@ -955,6 +957,8 @@ static int sunxi_nfc_hw_ecc_write_page(s
+@@ -959,6 +961,8 @@ static int sunxi_nfc_hw_ecc_write_page(s
writel(tmp, nfc->regs + NFC_REG_ECC_CTL);
}
chip->cmdfunc(mtd, NAND_CMD_RNDIN, offset, -1);
ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
-@@ -1164,13 +1168,13 @@ static int sunxi_nfc_hw_syndrome_ecc_wri
- /* Fill OOB data in */
- if (oob_required) {
- tmp = 0xffffffff;
-- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, &tmp,
-- 4);
- } else {
-- memcpy_toio(nfc->regs + NFC_REG_USER_DATA_BASE, oob,
-- 4);
-+ memcpy(&tmp, oob, sizeof(tmp));
-+ tmp = le32_to_cpu(tmp);
- }
-
-+ writel(tmp, nfc->regs + NFC_REG_USER_DATA_BASE);
-+
- cnt = ecc->bytes + 4;
- if (rnd &&
- nand_rnd_is_activ(mtd, rnd->page, offset, &cnt) > 0 &&
projects / openwrt / staging / lynxis.git / commitdiff