#ifndef CIK_REGS_H
#define CIK_REGS_H
-#define IH_VMID_0_LUT 0x3D40u
-
-#define BIF_DOORBELL_CNTL 0x530Cu
-
-#define SRBM_GFX_CNTL 0xE44
-#define PIPEID(x) ((x) << 0)
-#define MEID(x) ((x) << 2)
-#define VMID(x) ((x) << 4)
-#define QUEUEID(x) ((x) << 8)
-
-#define SQ_CONFIG 0x8C00
-
-#define SH_MEM_BASES 0x8C28
/* if PTR32, these are the bases for scratch and lds */
#define PRIVATE_BASE(x) ((x) << 0) /* scratch */
#define SHARED_BASE(x) ((x) << 16) /* LDS */
-#define SH_MEM_APE1_BASE 0x8C2C
-/* if PTR32, this is the base location of GPUVM */
-#define SH_MEM_APE1_LIMIT 0x8C30
-/* if PTR32, this is the upper limit of GPUVM */
-#define SH_MEM_CONFIG 0x8C34
#define PTR32 (1 << 0)
-#define PRIVATE_ATC (1 << 1)
#define ALIGNMENT_MODE(x) ((x) << 2)
-#define SH_MEM_ALIGNMENT_MODE_DWORD 0
-#define SH_MEM_ALIGNMENT_MODE_DWORD_STRICT 1
-#define SH_MEM_ALIGNMENT_MODE_STRICT 2
#define SH_MEM_ALIGNMENT_MODE_UNALIGNED 3
#define DEFAULT_MTYPE(x) ((x) << 4)
#define APE1_MTYPE(x) ((x) << 7)
#define MTYPE_CACHED 0
#define MTYPE_NONCACHED 3
-
-#define SH_STATIC_MEM_CONFIG 0x9604u
-
-#define TC_CFG_L1_LOAD_POLICY0 0xAC68
-#define TC_CFG_L1_LOAD_POLICY1 0xAC6C
-#define TC_CFG_L1_STORE_POLICY 0xAC70
-#define TC_CFG_L2_LOAD_POLICY0 0xAC74
-#define TC_CFG_L2_LOAD_POLICY1 0xAC78
-#define TC_CFG_L2_STORE_POLICY0 0xAC7C
-#define TC_CFG_L2_STORE_POLICY1 0xAC80
-#define TC_CFG_L2_ATOMIC_POLICY 0xAC84
-#define TC_CFG_L1_VOLATILE 0xAC88
-#define TC_CFG_L2_VOLATILE 0xAC8C
-
-#define CP_PQ_WPTR_POLL_CNTL 0xC20C
-#define WPTR_POLL_EN (1 << 31)
-
-#define CPC_INT_CNTL 0xC2D0
-#define CP_ME1_PIPE0_INT_CNTL 0xC214
-#define CP_ME1_PIPE1_INT_CNTL 0xC218
-#define CP_ME1_PIPE2_INT_CNTL 0xC21C
-#define CP_ME1_PIPE3_INT_CNTL 0xC220
-#define CP_ME2_PIPE0_INT_CNTL 0xC224
-#define CP_ME2_PIPE1_INT_CNTL 0xC228
-#define CP_ME2_PIPE2_INT_CNTL 0xC22C
-#define CP_ME2_PIPE3_INT_CNTL 0xC230
-#define DEQUEUE_REQUEST_INT_ENABLE (1 << 13)
-#define WRM_POLL_TIMEOUT_INT_ENABLE (1 << 17)
-#define PRIV_REG_INT_ENABLE (1 << 23)
-#define TIME_STAMP_INT_ENABLE (1 << 26)
-#define GENERIC2_INT_ENABLE (1 << 29)
-#define GENERIC1_INT_ENABLE (1 << 30)
-#define GENERIC0_INT_ENABLE (1 << 31)
-#define CP_ME1_PIPE0_INT_STATUS 0xC214
-#define CP_ME1_PIPE1_INT_STATUS 0xC218
-#define CP_ME1_PIPE2_INT_STATUS 0xC21C
-#define CP_ME1_PIPE3_INT_STATUS 0xC220
-#define CP_ME2_PIPE0_INT_STATUS 0xC224
-#define CP_ME2_PIPE1_INT_STATUS 0xC228
-#define CP_ME2_PIPE2_INT_STATUS 0xC22C
-#define CP_ME2_PIPE3_INT_STATUS 0xC230
-#define DEQUEUE_REQUEST_INT_STATUS (1 << 13)
-#define WRM_POLL_TIMEOUT_INT_STATUS (1 << 17)
-#define PRIV_REG_INT_STATUS (1 << 23)
-#define TIME_STAMP_INT_STATUS (1 << 26)
-#define GENERIC2_INT_STATUS (1 << 29)
-#define GENERIC1_INT_STATUS (1 << 30)
-#define GENERIC0_INT_STATUS (1 << 31)
-
-#define CP_HPD_EOP_BASE_ADDR 0xC904
-#define CP_HPD_EOP_BASE_ADDR_HI 0xC908
-#define CP_HPD_EOP_VMID 0xC90C
-#define CP_HPD_EOP_CONTROL 0xC910
-#define EOP_SIZE(x) ((x) << 0)
-#define EOP_SIZE_MASK (0x3f << 0)
-#define CP_MQD_BASE_ADDR 0xC914
-#define CP_MQD_BASE_ADDR_HI 0xC918
-#define CP_HQD_ACTIVE 0xC91C
-#define CP_HQD_VMID 0xC920
-
-#define CP_HQD_PERSISTENT_STATE 0xC924u
#define DEFAULT_CP_HQD_PERSISTENT_STATE (0x33U << 8)
#define PRELOAD_REQ (1 << 0)
-#define CP_HQD_PIPE_PRIORITY 0xC928u
-#define CP_HQD_QUEUE_PRIORITY 0xC92Cu
-#define CP_HQD_QUANTUM 0xC930u
+#define MQD_CONTROL_PRIV_STATE_EN (1U << 8)
+
+#define DEFAULT_MIN_IB_AVAIL_SIZE (3U << 20)
+
+#define IB_ATC_EN (1U << 23)
+
#define QUANTUM_EN 1U
#define QUANTUM_SCALE_1MS (1U << 4)
#define QUANTUM_DURATION(x) ((x) << 8)
-#define CP_HQD_PQ_BASE 0xC934
-#define CP_HQD_PQ_BASE_HI 0xC938
-#define CP_HQD_PQ_RPTR 0xC93C
-#define CP_HQD_PQ_RPTR_REPORT_ADDR 0xC940
-#define CP_HQD_PQ_RPTR_REPORT_ADDR_HI 0xC944
-#define CP_HQD_PQ_WPTR_POLL_ADDR 0xC948
-#define CP_HQD_PQ_WPTR_POLL_ADDR_HI 0xC94C
-#define CP_HQD_PQ_DOORBELL_CONTROL 0xC950
-#define DOORBELL_OFFSET(x) ((x) << 2)
-#define DOORBELL_OFFSET_MASK (0x1fffff << 2)
-#define DOORBELL_SOURCE (1 << 28)
-#define DOORBELL_SCHD_HIT (1 << 29)
-#define DOORBELL_EN (1 << 30)
-#define DOORBELL_HIT (1 << 31)
-#define CP_HQD_PQ_WPTR 0xC954
-#define CP_HQD_PQ_CONTROL 0xC958
-#define QUEUE_SIZE(x) ((x) << 0)
-#define QUEUE_SIZE_MASK (0x3f << 0)
#define RPTR_BLOCK_SIZE(x) ((x) << 8)
-#define RPTR_BLOCK_SIZE_MASK (0x3f << 8)
#define MIN_AVAIL_SIZE(x) ((x) << 20)
-#define PQ_ATC_EN (1 << 23)
-#define PQ_VOLATILE (1 << 26)
-#define NO_UPDATE_RPTR (1 << 27)
-#define UNORD_DISPATCH (1 << 28)
-#define ROQ_PQ_IB_FLIP (1 << 29)
-#define PRIV_STATE (1 << 30)
-#define KMD_QUEUE (1 << 31)
-
#define DEFAULT_RPTR_BLOCK_SIZE RPTR_BLOCK_SIZE(5)
#define DEFAULT_MIN_AVAIL_SIZE MIN_AVAIL_SIZE(3)
-#define CP_HQD_IB_BASE_ADDR 0xC95Cu
-#define CP_HQD_IB_BASE_ADDR_HI 0xC960u
-#define CP_HQD_IB_RPTR 0xC964u
-#define CP_HQD_IB_CONTROL 0xC968u
-#define IB_ATC_EN (1U << 23)
-#define DEFAULT_MIN_IB_AVAIL_SIZE (3U << 20)
-
-#define AQL_ENABLE 1
-
-#define CP_HQD_DEQUEUE_REQUEST 0xC974
-#define DEQUEUE_REQUEST_DRAIN 1
-#define DEQUEUE_REQUEST_RESET 2
-#define DEQUEUE_INT (1U << 8)
+#define PQ_ATC_EN (1 << 23)
+#define NO_UPDATE_RPTR (1 << 27)
-#define CP_HQD_SEMA_CMD 0xC97Cu
-#define CP_HQD_MSG_TYPE 0xC980u
-#define CP_HQD_ATOMIC0_PREOP_LO 0xC984u
-#define CP_HQD_ATOMIC0_PREOP_HI 0xC988u
-#define CP_HQD_ATOMIC1_PREOP_LO 0xC98Cu
-#define CP_HQD_ATOMIC1_PREOP_HI 0xC990u
-#define CP_HQD_HQ_SCHEDULER0 0xC994u
-#define CP_HQD_HQ_SCHEDULER1 0xC998u
+#define DOORBELL_OFFSET(x) ((x) << 2)
+#define DOORBELL_EN (1 << 30)
+#define PRIV_STATE (1 << 30)
+#define KMD_QUEUE (1 << 31)
-#define CP_MQD_CONTROL 0xC99C
-#define MQD_VMID(x) ((x) << 0)
-#define MQD_VMID_MASK (0xf << 0)
-#define MQD_CONTROL_PRIV_STATE_EN (1U << 8)
+#define AQL_ENABLE 1
#define SDMA_RB_VMID(x) (x << 24)
#define SDMA_RB_ENABLE (1 << 0)
#define SDMA_VA_SHARED_BASE(x) (x << 8)
#define GRBM_GFX_INDEX 0x30800
-#define INSTANCE_INDEX(x) ((x) << 0)
-#define SH_INDEX(x) ((x) << 8)
-#define SE_INDEX(x) ((x) << 16)
-#define SH_BROADCAST_WRITES (1 << 29)
-#define INSTANCE_BROADCAST_WRITES (1 << 30)
-#define SE_BROADCAST_WRITES (1 << 31)
-
-#define SQC_CACHES 0x30d20
-#define SQC_POLICY 0x8C38u
-#define SQC_VOLATILE 0x8C3Cu
-#define CP_PERFMON_CNTL 0x36020
-
-#define ATC_VMID0_PASID_MAPPING 0x339Cu
-#define ATC_VMID_PASID_MAPPING_UPDATE_STATUS 0x3398u
#define ATC_VMID_PASID_MAPPING_VALID (1U << 31)
-#define ATC_VM_APERTURE0_CNTL 0x3310u
-#define ATS_ACCESS_MODE_NEVER 0
-#define ATS_ACCESS_MODE_ALWAYS 1
-
-#define ATC_VM_APERTURE0_CNTL2 0x3318u
-#define ATC_VM_APERTURE0_HIGH_ADDR 0x3308u
-#define ATC_VM_APERTURE0_LOW_ADDR 0x3300u
-#define ATC_VM_APERTURE1_CNTL 0x3314u
-#define ATC_VM_APERTURE1_CNTL2 0x331Cu
-#define ATC_VM_APERTURE1_HIGH_ADDR 0x330Cu
-#define ATC_VM_APERTURE1_LOW_ADDR 0x3304u
-
#endif
projects / openwrt / staging / blogic.git / commitdiff