--- /dev/null
+/*
+ * Compex WPJ342 board support
+ *
+ * Copyright (c) 2011 Qualcomm Atheros
+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+#include <linux/export.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "pci.h"
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-nfc.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WPJ342_GPIO_LED_STATUS 11
+#define WPJ342_GPIO_LED_SIG1 14
+#define WPJ342_GPIO_LED_SIG2 13
+#define WPJ342_GPIO_LED_SIG3 12
+#define WPJ342_GPIO_LED_SIG4 11
+#define WPJ342_GPIO_BUZZER 15
+
+#define WPJ342_GPIO_BTN_RESET 17
+
+#define WPJ342_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPJ342_KEYS_DEBOUNCE_INTERVAL (3 * WPJ342_KEYS_POLL_INTERVAL)
+
+#define WPJ342_MAC0_OFFSET 0x10
+#define WPJ342_MAC1_OFFSET 0x18
+#define WPJ342_WMAC_CALDATA_OFFSET 0x1000
+#define WPJ342_PCIE_CALDATA_OFFSET 0x5000
+
+#define WPJ342_ART_SIZE 0x8000
+
+static struct gpio_led wpj342_leds_gpio[] __initdata = {
+ {
+ .name = "wpj342:red:sig1",
+ .gpio = WPJ342_GPIO_LED_SIG1,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj342:yellow:sig2",
+ .gpio = WPJ342_GPIO_LED_SIG2,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj342:green:sig3",
+ .gpio = WPJ342_GPIO_LED_SIG3,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj342:green:sig4",
+ .gpio = WPJ342_GPIO_LED_SIG4,
+ .active_low = 1,
+ },
+ {
+ .name = "wpj342:buzzer",
+ .gpio = WPJ342_GPIO_BUZZER,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button wpj342_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPJ342_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPJ342_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static struct ar8327_pad_cfg wpj342_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_led_cfg wpj342_ar8327_led_cfg = {
+ .led_ctrl0 = 0x00000000,
+ .led_ctrl1 = 0xc737c737,
+ .led_ctrl2 = 0x00000000,
+ .led_ctrl3 = 0x00c30c00,
+ .open_drain = true,
+};
+
+static struct ar8327_platform_data wpj342_ar8327_data = {
+ .pad0_cfg = &wpj342_ar8327_pad0_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .led_cfg = &wpj342_ar8327_led_cfg,
+};
+
+static struct mdio_board_info wpj342_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &wpj342_ar8327_data,
+ },
+};
+
+
+static void __init wpj342_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj342_leds_gpio),
+ wpj342_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WPJ342_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpj342_gpio_keys),
+ wpj342_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(art + WPJ342_WMAC_CALDATA_OFFSET, NULL);
+
+ ath79_register_pci();
+
+ mdiobus_register_board_info(wpj342_mdio0_info,
+ ARRAY_SIZE(wpj342_mdio0_info));
+
+ ath79_register_mdio(1, 0x0);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ342_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ342_MAC1_OFFSET, 0);
+
+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0);
+
+ /* GMAC0 is connected to an AR8236 switch */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
+
+ ath79_register_eth(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPJ342, "WPJ342", "Compex WPJ342", wpj342_setup);
ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware)
+wpj342_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
dr344_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
+$(eval $(call SingleProfile,AthLzma,64k,WPJ342_16M,wpj342-16M,WPJ342,ttyS0,115200,$$(wpj342_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC))
$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M))
$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
+$(eval $(call MultiProfile,WPJ342,WPJ342_16M))
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
$(eval $(call MultiProfile,WPJ531,WPJ531_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
projects / openwrt / staging / blogic.git / commitdiff