static void pvr2_hdw_internal_set_std_avail(struct pvr2_hdw *hdw);
static void pvr2_hdw_quiescent_timeout(unsigned long);
static void pvr2_hdw_encoder_wait_timeout(unsigned long);
+static void pvr2_hdw_encoder_run_timeout(unsigned long);
static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32);
static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
unsigned int timeout,int probe_fl,
time we configure the encoder, then we'll fully configure it. */
hdw->enc_cur_valid = 0;
+ /* Encoder is about to be reset so note that as far as we're
+ concerned now, the encoder has never been run. */
+ del_timer_sync(&hdw->encoder_run_timer);
+ if (hdw->state_encoder_runok) {
+ hdw->state_encoder_runok = 0;
+ trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
+ }
+
/* First prepare firmware loading */
ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/
ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/
hdw->encoder_wait_timer.data = (unsigned long)hdw;
hdw->encoder_wait_timer.function = pvr2_hdw_encoder_wait_timeout;
+ init_timer(&hdw->encoder_run_timer);
+ hdw->encoder_run_timer.data = (unsigned long)hdw;
+ hdw->encoder_run_timer.function = pvr2_hdw_encoder_run_timeout;
+
hdw->master_state = PVR2_STATE_DEAD;
init_waitqueue_head(&hdw->state_wait_data);
fail:
if (hdw) {
del_timer_sync(&hdw->quiescent_timer);
+ del_timer_sync(&hdw->encoder_run_timer);
del_timer_sync(&hdw->encoder_wait_timer);
if (hdw->workqueue) {
flush_workqueue(hdw->workqueue);
hdw->workqueue = NULL;
}
del_timer_sync(&hdw->quiescent_timer);
+ del_timer_sync(&hdw->encoder_run_timer);
del_timer_sync(&hdw->encoder_wait_timer);
if (hdw->fw_buffer) {
kfree(hdw->fw_buffer);
}
+/* Return true if the encoder should not be running. */
+static int state_check_disable_encoder_run(struct pvr2_hdw *hdw)
+{
+ if (!hdw->state_encoder_ok) {
+ /* Encoder isn't healthy at the moment, so stop it. */
+ return !0;
+ }
+ if (!hdw->state_pathway_ok) {
+ /* Mode is not understood at the moment (i.e. it wants to
+ change), so encoder must be stopped. */
+ return !0;
+ }
+
+ switch (hdw->pathway_state) {
+ case PVR2_PATHWAY_ANALOG:
+ if (!hdw->state_decoder_run) {
+ /* We're in analog mode and the decoder is not
+ running; thus the encoder should be stopped as
+ well. */
+ return !0;
+ }
+ break;
+ case PVR2_PATHWAY_DIGITAL:
+ if (hdw->state_encoder_runok) {
+ /* This is a funny case. We're in digital mode so
+ really the encoder should be stopped. However
+ if it really is running, only kill it after
+ runok has been set. This gives a chance for the
+ onair quirk to function (encoder must run
+ briefly first, at least once, before onair
+ digital streaming can work). */
+ return !0;
+ }
+ break;
+ default:
+ /* Unknown mode; so encoder should be stopped. */
+ return !0;
+ }
+
+ /* If we get here, we haven't found a reason to stop the
+ encoder. */
+ return 0;
+}
+
+
+/* Return true if the encoder should be running. */
+static int state_check_enable_encoder_run(struct pvr2_hdw *hdw)
+{
+ if (!hdw->state_encoder_ok) {
+ /* Don't run the encoder if it isn't healthy... */
+ return 0;
+ }
+ if (!hdw->state_pathway_ok) {
+ /* Don't run the encoder if we don't (yet) know what mode
+ we need to be in... */
+ return 0;
+ }
+
+ switch (hdw->pathway_state) {
+ case PVR2_PATHWAY_ANALOG:
+ if (hdw->state_decoder_run) {
+ /* In analog mode, if the decoder is running, then
+ run the encoder. */
+ return !0;
+ }
+ break;
+ case PVR2_PATHWAY_DIGITAL:
+ if ((hdw->hdw_desc->digital_control_scheme ==
+ PVR2_DIGITAL_SCHEME_ONAIR) &&
+ !hdw->state_encoder_runok) {
+ /* This is a quirk. OnAir hardware won't stream
+ digital until the encoder has been run at least
+ once, for a minimal period of time (empiricially
+ measured to be 1/4 second). So if we're on
+ OnAir hardware and the encoder has never been
+ run at all, then start the encoder. Normal
+ state machine logic in the driver will
+ automatically handle the remaining bits. */
+ return !0;
+ }
+ break;
+ default:
+ /* For completeness (unknown mode; encoder won't run ever) */
+ break;
+ }
+ /* If we get here, then we haven't found any reason to run the
+ encoder, so don't run it. */
+ return 0;
+}
+
+
/* Evaluate whether or not state_encoder_run can change */
static int state_eval_encoder_run(struct pvr2_hdw *hdw)
{
if (hdw->state_encoder_run) {
+ if (!state_check_disable_encoder_run(hdw)) return 0;
if (hdw->state_encoder_ok) {
- if (hdw->state_decoder_run &&
- hdw->state_pathway_ok) return 0;
+ del_timer_sync(&hdw->encoder_run_timer);
if (pvr2_encoder_stop(hdw) < 0) return !0;
}
hdw->state_encoder_run = 0;
} else {
- if (!hdw->state_encoder_ok) return 0;
- if (!hdw->state_decoder_run) return 0;
- if (!hdw->state_pathway_ok) return 0;
- if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) return 0;
+ if (!state_check_enable_encoder_run(hdw)) return 0;
if (pvr2_encoder_start(hdw) < 0) return !0;
hdw->state_encoder_run = !0;
+ if (!hdw->state_encoder_runok) {
+ hdw->encoder_run_timer.expires =
+ jiffies + (HZ*250/1000);
+ add_timer(&hdw->encoder_run_timer);
+ }
}
trace_stbit("state_encoder_run",hdw->state_encoder_run);
return !0;
}
+/* Timeout function for encoder run timer. */
+static void pvr2_hdw_encoder_run_timeout(unsigned long data)
+{
+ struct pvr2_hdw *hdw = (struct pvr2_hdw *)data;
+ if (!hdw->state_encoder_runok) {
+ hdw->state_encoder_runok = !0;
+ trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
+ hdw->state_stale = !0;
+ queue_work(hdw->workqueue,&hdw->workpoll);
+ }
+}
+
+
/* Evaluate whether or not state_decoder_run can change */
static int state_eval_decoder_run(struct pvr2_hdw *hdw)
{
} else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
(hdw->hdw_desc->flag_digital_requires_cx23416)) {
if (!hdw->state_encoder_ok) return 0;
+ if (hdw->state_encoder_run) return 0;
+ if (hdw->hdw_desc->digital_control_scheme ==
+ PVR2_DIGITAL_SCHEME_ONAIR) {
+ /* OnAir digital receivers won't stream
+ unless the analog encoder has run first.
+ Why? I have no idea. But don't even
+ try until we know the analog side is
+ known to have run. */
+ if (!hdw->state_encoder_runok) return 0;
+ }
}
if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0;
hdw->state_usbstream_run = !0;
(hdw->state_encoder_ok ?
"" : " <encode:init>"),
(hdw->state_encoder_run ?
- " <encode:run>" : " <encode:stop>"),
+ (hdw->state_encoder_runok ?
+ " <encode:run>" :
+ " <encode:firstrun>") :
+ (hdw->state_encoder_runok ?
+ " <encode:stop>" :
+ " <encode:virgin>")),
(hdw->state_encoder_config ?
" <encode:configok>" :
(hdw->state_encoder_waitok ?
projects / openwrt / staging / blogic.git / commitdiff