Add I2C support for Engicam i.CoreM6 qdl board.
icorem6qdl> i2c bus
Bus 0: i2c@
021a0000
Bus 1: i2c@
021a4000
Bus 2: i2c@
021a8000
icorem6qdl> i2c dev 2
Setting bus to 2
icorem6qdl> i2c speed 100000
Setting bus speed to 100000 Hz
icorem6qdl> i2c probe
Valid chip addresses: 2C
icorem6qdl> i2c md 2C 0xff
00ff: 00 00 00 00 0f f0 01 64 ff ff 00 00 00 00 00 00 .......d........
Cc: Stefano Babic <sbabic@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Heiko Schocher <hs@denx.de>
select DM
select DM_ETH
select DM_GPIO
+ select DM_I2C
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
# CONFIG_DM_MMC_OPS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
CONFIG_IMX_THERMAL=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
CONFIG_VIDEO=y
CONFIG_VIDEO_IPUV3=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_EXT_SUPPORT=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_MEMTEST=y
# CONFIG_DM_MMC_OPS is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
+CONFIG_SYS_I2C_MXC=y
CONFIG_VIDEO=y
CONFIG_VIDEO_IPUV3=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_DMA_SUPPORT=y