__le64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
__le64 phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */
u8 caps;
-#define ICE_AQ_PHY_ENA_TX_PAUSE_ABILITY BIT(0)
-#define ICE_AQ_PHY_ENA_RX_PAUSE_ABILITY BIT(1)
+#define ICE_AQ_PHY_ENA_VALID_MASK ICE_M(0xef, 0)
+#define ICE_AQ_PHY_ENA_TX_PAUSE_ABILITY BIT(0)
+#define ICE_AQ_PHY_ENA_RX_PAUSE_ABILITY BIT(1)
#define ICE_AQ_PHY_ENA_LOW_POWER BIT(2)
#define ICE_AQ_PHY_ENA_LINK BIT(3)
#define ICE_AQ_PHY_ENA_AUTO_LINK_UPDT BIT(5)
if (!cfg)
return ICE_ERR_PARAM;
+ /* Ensure that only valid bits of cfg->caps can be turned on. */
+ if (cfg->caps & ~ICE_AQ_PHY_ENA_VALID_MASK) {
+ ice_debug(hw, ICE_DBG_PHY,
+ "Invalid bit is set in ice_aqc_set_phy_cfg_data->caps : 0x%x\n",
+ cfg->caps);
+
+ cfg->caps &= ICE_AQ_PHY_ENA_VALID_MASK;
+ }
+
ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_set_phy_cfg);
desc.params.set_phy.lport_num = lport;
desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
/* clear the old pause settings */
cfg.caps = pcaps->caps & ~(ICE_AQC_PHY_EN_TX_LINK_PAUSE |
ICE_AQC_PHY_EN_RX_LINK_PAUSE);
+
/* set the new capabilities */
cfg.caps |= pause_mask;
+
/* If the capabilities have changed, then set the new config */
if (cfg.caps != pcaps->caps) {
int retry_count, retry_max = 10;
/* debug masks - set these bits in hw->debug_mask to control output */
#define ICE_DBG_INIT BIT_ULL(1)
#define ICE_DBG_LINK BIT_ULL(4)
+#define ICE_DBG_PHY BIT_ULL(5)
#define ICE_DBG_QCTX BIT_ULL(6)
#define ICE_DBG_NVM BIT_ULL(7)
#define ICE_DBG_LAN BIT_ULL(8)