[PATCH] i2c-i801: Remove force_addr parameter

i2c-i801: Remove force_addr parameter

Remove the force_addr module parameter. It doesn't appear to ever
have been needed, and PCI resources shouldn't be arbitrarily
changed anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index fd4b2712d570a99a4f241d3f7020694da47d99db..e46c2345824243b66d50f7efbc101699561300ea 100644 (file)
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -21,8 +21,7 @@ Authors:
 Module Parameters
 -----------------
 
-* force_addr: int
-  Forcibly enable the ICH at the given address. EXTREMELY DANGEROUS!
+None.
 
 
 Description

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4396dc91d5f5e32d41aea40229653df2fd804c6f..0d5374cce9ccc7bb71b138ea3445b48958d08532 100644 (file)
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -92,15 +92,6 @@
 #define I801_START             0x40
 #define I801_PEC_EN            0x80    /* ICH4 only */
 
-/* insmod parameters */
-
-/* If force_addr is set to anything different from 0, we forcibly enable
-   the I801 at the given address. VERY DANGEROUS! */
-static u16 force_addr;
-module_param(force_addr, ushort, 0);
-MODULE_PARM_DESC(force_addr,
-                "Forcibly enable the I801 at the given address. "
-                "EXTREMELY DANGEROUS!");
 
 static int i801_transaction(void);
 static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
@@ -129,16 +120,12 @@ static int i801_setup(struct pci_dev *dev)
                isich4 = 0;
 
        /* Determine the address of the SMBus areas */
-       if (force_addr) {
-               i801_smba = force_addr & 0xfff0;
-       } else {
-               pci_read_config_word(I801_dev, SMBBA, &i801_smba);
-               i801_smba &= 0xfff0;
-               if(i801_smba == 0) {
-                       dev_err(&dev->dev, "SMB base address uninitialized "
-                               "- upgrade BIOS or use force_addr=0xaddr\n");
-                       return -ENODEV;
-               }
+       pci_read_config_word(I801_dev, SMBBA, &i801_smba);
+       i801_smba &= 0xfff0;
+       if (!i801_smba) {
+               dev_err(&dev->dev, "SMBus base address uninitialized, "
+                       "upgrade BIOS\n");
+               return -ENODEV;
        }
 
        if (!request_region(i801_smba, (isich4 ? 16 : 8), i801_driver.name)) {
@@ -152,15 +139,7 @@ static int i801_setup(struct pci_dev *dev)
        temp &= ~SMBHSTCFG_I2C_EN;      /* SMBus timing */
        pci_write_config_byte(I801_dev, SMBHSTCFG, temp);
 
-       /* If force_addr is set, we program the new address here. Just to make
-          sure, we disable the device first. */
-       if (force_addr) {
-               pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe);
-               pci_write_config_word(I801_dev, SMBBA, i801_smba);
-               pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 0x01);
-               dev_warn(&dev->dev, "WARNING: I801 SMBus interface set to "
-                       "new address %04x!\n", i801_smba);
-       } else if ((temp & 1) == 0) {
+       if (!(temp & 1)) {
                pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1);
                dev_warn(&dev->dev, "enabling SMBus device\n");
        }