meraki,mx60)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "4"
;;
+netgear,wndap620|\
+netgear,wndap660)
+ ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x4000" "0x4000" "4"
+ ;;
esac
config_load ubootenv
ucidef_set_led_switch "lan4" "LAN4" "mx60:green:lan4" "switch0" "0x02"
;;
+netgear,wndap620)
+ ucidef_set_led_switch "lan_act" "LAN (Activity)" "wndap6x0:green:activity" "switch0" "0x04" "0x0f" "rx tx"
+ ucidef_set_led_switch "lan_100" "LAN 100Mbps" "wndap620:amber:link100" "switch0" "0x04" "0x04" "link"
+ ucidef_set_led_switch "lan_1000" "LAN 1000Mbps" "wndap620:green:link1000" "switch0" "0x04" "0x08" "link"
+ ;;
+
+netgear,wndap660)
+ ucidef_set_led_netdev "lan_act" "LAN (Activity)" "wndap6x0:green:activity" "eth0"
+ ucidef_set_led_switch "lan1_100" "LAN 100Mbps" "wndap660:amber:lan1-link100" "switch0" "0x04" "0x04" "link"
+ ucidef_set_led_switch "lan1_1000" "LAN 1000Mbps" "wndap660:green:lan1-link1000" "switch0" "0x04" "0x08" "link"
+ ucidef_set_led_switch "lan2_100" "LAN 100Mbps" "wndap660:amber:lan2-link100" "switch0" "0x02" "0x04" "link"
+ ucidef_set_led_switch "lan2_1000" "LAN 1000Mbps" "wndap660:green:lan2-link1000" "switch0" "0x02" "0x08" "link"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "wndap6x0:green:wlan2g" "phy0tpt"
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "wndap6x0:green:wlan5g" "phy1tpt"
+ ;;
+
netgear,wndr4700)
ucidef_set_led_switch "wan_green" "WAN (green)" "wndr4700:green:wan" "switch0" "0x20"
ucidef_set_led_netdev "wan_yellow" "WAN (yellow)" "wndr4700:yellow:wan" "eth0.2" "tx rx"
wd,mybooklive-duo)
ucidef_set_interface_lan "eth0"
;;
-
+netgear,wndap620)
+ ucidef_add_switch "switch0" "2:lan" "5@eth0"
+ ;;
+netgear,wndap660)
+ ucidef_add_switch "switch0" "1:lan:2" "2:lan:1" "5@eth0"
+ ;;
meraki,mx60|\
netgear,wndr4700)
ucidef_add_switch "switch0" \
--- /dev/null
+#!/bin/ash
+
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+netgear,wndap620|\
+netgear,wndap660)
+ echo $(macaddr_add $(mtd_get_mac_ascii u-boot-env baseMAC) $(($PHYNBR + 1)) ) > /sys${DEVPATH}/macaddress
+ ;;
+*)
+ ;;
+esac
;;
meraki,mr24|\
meraki,mx60|\
+ netgear,wndap620|\
+ netgear,wndap660|\
netgear,wndr4700)
nand_do_upgrade "$1"
;;
--- /dev/null
+/*
+ * Device Tree Source for Netgear WNDAP620
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "netgear-wndap6x0.dtsi";
+
+/ {
+ model = "Netgear WNDAP620";
+ compatible = "netgear,wndap620", "apm,bluestone";
+};
+
+&LEDS {
+ link1000 {
+ label = "wndap620:green:link1000";
+ gpios = <&GPIO0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ link100 {
+ label = "wndap620:amber:link100";
+ gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for Netgear WNDAP660
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "netgear-wndap6x0.dtsi"
+
+/ {
+ model = "Netgear WNDAP660";
+ compatible = "netgear,wndap660", "apm,bluestone";
+};
+
+&LEDS {
+ lan1-link1000 {
+ label = "wndap660:green:lan1-link1000";
+ gpios = <&GPIO0 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1-link100 {
+ label = "wndap660:amber:lan1-link100";
+ gpios = <&GPIO0 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2-link1000 {
+ label = "wndap660:green:lan2-link1000";
+ gpios = <&GPIO0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2-link100 {
+ label = "wndap660:amber:lan2-link100";
+ gpios = <&GPIO0 10 GPIO_ACTIVE_HIGH>;
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for Netgear WNDAP620 and WNDAP660
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+#include "apm82181.dtsi"
+
+/ {
+ aliases {
+ serial0 = &UART0;
+ led-boot = &status;
+ led-failsafe = &failsafe;
+ led-running = &status;
+ led-upgrade = &status;
+ };
+
+ chosen {
+ stdout-path = "/plb/opb/serial@ef600300";
+ };
+};
+
+&CRYPTO {
+ status = "okay";
+};
+
+&PKA {
+ status = "okay";
+};
+
+&TRNG {
+ status = "okay";
+};
+
+&EBC0 {
+ ndfc@1,0 {
+ status = "okay";
+ /* 32 MiB SLC NAND Flash */
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot-env";
+ reg = <0x00100000 0x00010000>;
+ read-only;
+ };
+
+ partition@110000,0 {
+ label = "firmware";
+ reg = <0x00110000 0x01ac0000>;
+ };
+
+ partition@110000,1 {
+ /*
+ * The u-boot bootloader will look at this
+ * offset (0x110000) for an uImage binary.
+ */
+ label = "kernel";
+ reg = <0x00110000 0x003f0000>;
+ };
+
+ partition@500000 {
+ label = "ubi";
+ reg = <0x00500000 0x016d0000>;
+ };
+
+ partition@1bd0000 {
+ /*
+ * original vendor device-tree - do not use or
+ * overwrite. The original u-boot also supports
+ * the gzipped legacy monolithic/Multi-File Image
+ * format, which is a better choice.
+ */
+ label = "device-tree";
+ reg = <0x01bd0000 0x0010000>;
+ read-only;
+ };
+
+ partition@1be0000 {
+ label = "var";
+ reg = <0x01be0000 0x0400000>;
+ read-only;
+ };
+
+ partition@1fe0000 {
+ label = "manudata";
+ reg = <0x01fe0000 0x20000 >;
+ read-only;
+ };
+ };
+ };
+};
+
+&UART0 {
+ status = "okay";
+};
+
+&GPIO0 {
+ status = "okay";
+};
+
+&EMAC0 {
+ status = "okay";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ asym-pause;
+ };
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&POB0 {
+ gpio_keys_polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ poll-interval = <60>; /* 3 * 20 = 60ms */
+ autorepeat;
+
+ reset {
+ label = "Reset Button";
+ gpios = <&GPIO0 16 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+
+ LEDS: gpio-leds {
+ compatible = "gpio-leds";
+
+ status: power {
+ label = "wndap6x0:green:power";
+ gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
+ };
+
+ failsafe: test {
+ label = "wndap6x0:amber:test";
+ gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ activity {
+ label = "wndap6x0:green:activity";
+ gpios = <&GPIO0 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan2g {
+ label = "wndap6x0:green:wlan2g";
+ gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan5g {
+ label = "wndap6x0:green:wlan5g";
+ gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+
+ internal-antenna {
+ gpio-export,name = "wndap6x0:internal-antenna";
+ gpio-export,output = <1>;
+ gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ external-antenna {
+ gpio-export,name = "wndap6x0:external-antenna";
+ gpio-export,output = <0>;
+ gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ mains-powered {
+ /*
+ * Input pin describing what powers the AP
+ * 0/Low = PoE
+ * 1/High = 12v mains powered
+ */
+ gpio-export,name = "wndap620:mains-powered";
+ gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ rtl8367b {
+ compatible = "realtek,rtl8367b";
+ cpu_port = <5>;
+ realtek,extif0 = <1 2 1 1 1 1 1 1 2>;
+ mii-bus = <&mdio0>;
+ };
+};
+
+&PCIE0 {
+ status = "okay";
+};
+
+&MSI {
+ status = "okay";
+};
+
+&IIC0 {
+ status = "okay";
+
+ at24@52 {
+ compatible = "atmel,24c04";
+ reg = <0x52>;
+ pagesize = <16>;
+ read-only;
+ };
+};
+
rm -rf $@.fakerd
endef
+define Device/netgear_wndap6x0
+ DEVICE_PACKAGES := kmod-eeprom-at24
+ SUBPAGESIZE := 256
+ PAGESIZE := 512
+ BLOCKSIZE := 16k
+ DTB_SIZE := 32768
+ IMAGE_SIZE := 27392k
+ IMAGES := sysupgrade.tar factory.img
+ KERNEL_SIZE := 4032k
+ KERNEL := dtb | kernel-bin | gzip | MuImage-initramfs gzip
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ UBINIZE_OPTS := -E 5
+endef
+
+define Device/netgear_wndap620
+ $(Device/netgear_wndap6x0)
+ DEVICE_TITLE := Netgear WNDAP620 - Premium Wireless-N
+ DEVICE_DTS := netgear-wndap620
+endef
+TARGET_DEVICES += netgear_wndap620
+
+define Device/netgear_wndap660
+ $(Device/netgear_wndap6x0)
+ DEVICE_TITLE := Netgear WNDAP660 - Dual Radio Dual Band Wireless-N
+ DEVICE_DTS := netgear-wndap660
+endef
+TARGET_DEVICES += netgear_wndap660
+
define Device/netgear_wndr4700
DEVICE_TITLE := Netgear Centria N900 WNDR4700/WNDR4720
DEVICE_PACKAGES := badblocks block-mount e2fsprogs \
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367B_PHY=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_TC654=y
CONFIG_SWCONFIG=y
CONFIG_SWCONFIG_LEDS=y
CONFIG_WNDR4700=y
+
projects / openwrt / staging / hauke.git / commitdiff