+++ /dev/null
-From 2365f91c861cbfeef7141c69842848c7b2d3c2db Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Sun, 13 Feb 2022 15:40:44 +0900
-Subject: [PATCH] mtd: parsers: trx: allow to use on MediaTek MIPS SoCs
-
-Buffalo sells some router devices which have trx-formatted firmware,
-based on MediaTek MIPS SoCs. To use parser_trx on those devices, add
-"RALINK" to dependency and allow to compile for MediaTek MIPS SoCs.
-
-examples:
-
-- WCR-1166DS (MT7628)
-- WSR-1166DHP (MT7621)
-- WSR-2533DHP (MT7621)
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220213064045.1781-1-musashino.open@gmail.com
----
- drivers/mtd/parsers/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -115,7 +115,7 @@ config MTD_AFS_PARTS
-
- config MTD_PARSER_TRX
- tristate "Parser for TRX format partitions"
-- depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST)
-+ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
- help
- TRX is a firmware format used by Broadcom on their devices. It
- may contain up to 3/4 partitions (depending on the version).
--- /dev/null
+From 2365f91c861cbfeef7141c69842848c7b2d3c2db Mon Sep 17 00:00:00 2001
+From: INAGAKI Hiroshi <musashino.open@gmail.com>
+Date: Sun, 13 Feb 2022 15:40:44 +0900
+Subject: [PATCH] mtd: parsers: trx: allow to use on MediaTek MIPS SoCs
+
+Buffalo sells some router devices which have trx-formatted firmware,
+based on MediaTek MIPS SoCs. To use parser_trx on those devices, add
+"RALINK" to dependency and allow to compile for MediaTek MIPS SoCs.
+
+examples:
+
+- WCR-1166DS (MT7628)
+- WSR-1166DHP (MT7621)
+- WSR-2533DHP (MT7621)
+
+Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
+Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
+Link: https://lore.kernel.org/linux-mtd/20220213064045.1781-1-musashino.open@gmail.com
+---
+ drivers/mtd/parsers/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/mtd/parsers/Kconfig
++++ b/drivers/mtd/parsers/Kconfig
+@@ -115,7 +115,7 @@ config MTD_AFS_PARTS
+
+ config MTD_PARSER_TRX
+ tristate "Parser for TRX format partitions"
+- depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || COMPILE_TEST)
++ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
+ help
+ TRX is a firmware format used by Broadcom on their devices. It
+ may contain up to 3/4 partitions (depending on the version).
+++ /dev/null
-From 31d8f414e1596ba54a4315418e4c0086fda9e428 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Fri, 18 Feb 2022 10:06:43 +0100
-Subject: hwmon: (lm70) Add ti,tmp125 support
-
-The TMP125 is a 2 degree Celsius accurate Digital
-Temperature Sensor with a SPI interface.
-
-The temperature register is a 16-bit, read-only register.
-The MSB (Bit 15) is a leading zero and never set. Bits 14
-to 5 are the 1+9 temperature data bits in a two's
-complement format. Bits 4 to 0 are useless copies of
-Bit 5 value and therefore ignored.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
----
---- a/drivers/hwmon/lm70.c
-+++ b/drivers/hwmon/lm70.c
-@@ -34,6 +34,7 @@
- #define LM70_CHIP_LM71 2 /* NS LM71 */
- #define LM70_CHIP_LM74 3 /* NS LM74 */
- #define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */
-+#define LM70_CHIP_TMP125 5 /* TI TMP125 */
-
- struct lm70 {
- struct spi_device *spi;
-@@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct d
- * LM71:
- * 14 bits of 2's complement data, discard LSB 2 bits,
- * resolution 0.0312 degrees celsius.
-+ *
-+ * TMP125:
-+ * MSB/D15 is a leading zero. D14 is the sign-bit. This is
-+ * followed by 9 temperature bits (D13..D5) in 2's complement
-+ * data format with a resolution of 0.25 degrees celsius per unit.
-+ * LSB 5 bits (D4..D0) share the same value as D5 and get discarded.
- */
- switch (p_lm70->chip) {
- case LM70_CHIP_LM70:
-@@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct d
- case LM70_CHIP_LM71:
- val = ((int)raw / 4) * 3125 / 100;
- break;
-+
-+ case LM70_CHIP_TMP125:
-+ val = (sign_extend32(raw, 14) / 32) * 250;
-+ break;
- }
-
- status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
-@@ -136,6 +147,10 @@ static const struct of_device_id lm70_of
- .data = (void *) LM70_CHIP_TMP122,
- },
- {
-+ .compatible = "ti,tmp125",
-+ .data = (void *) LM70_CHIP_TMP125,
-+ },
-+ {
- .compatible = "ti,lm71",
- .data = (void *) LM70_CHIP_LM71,
- },
-@@ -184,6 +199,7 @@ static const struct spi_device_id lm70_i
- { "lm70", LM70_CHIP_LM70 },
- { "tmp121", LM70_CHIP_TMP121 },
- { "tmp122", LM70_CHIP_TMP122 },
-+ { "tmp125", LM70_CHIP_TMP125 },
- { "lm71", LM70_CHIP_LM71 },
- { "lm74", LM70_CHIP_LM74 },
- { },
--- /dev/null
+From 31d8f414e1596ba54a4315418e4c0086fda9e428 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Fri, 18 Feb 2022 10:06:43 +0100
+Subject: hwmon: (lm70) Add ti,tmp125 support
+
+The TMP125 is a 2 degree Celsius accurate Digital
+Temperature Sensor with a SPI interface.
+
+The temperature register is a 16-bit, read-only register.
+The MSB (Bit 15) is a leading zero and never set. Bits 14
+to 5 are the 1+9 temperature data bits in a two's
+complement format. Bits 4 to 0 are useless copies of
+Bit 5 value and therefore ignored.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Link: https://lore.kernel.org/r/43b19cbd4e7f51e9509e561b02b5d8d0e7079fac.1645175187.git.chunkeey@gmail.com
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+---
+--- a/drivers/hwmon/lm70.c
++++ b/drivers/hwmon/lm70.c
+@@ -34,6 +34,7 @@
+ #define LM70_CHIP_LM71 2 /* NS LM71 */
+ #define LM70_CHIP_LM74 3 /* NS LM74 */
+ #define LM70_CHIP_TMP122 4 /* TI TMP122/TMP124 */
++#define LM70_CHIP_TMP125 5 /* TI TMP125 */
+
+ struct lm70 {
+ struct spi_device *spi;
+@@ -87,6 +88,12 @@ static ssize_t temp1_input_show(struct d
+ * LM71:
+ * 14 bits of 2's complement data, discard LSB 2 bits,
+ * resolution 0.0312 degrees celsius.
++ *
++ * TMP125:
++ * MSB/D15 is a leading zero. D14 is the sign-bit. This is
++ * followed by 9 temperature bits (D13..D5) in 2's complement
++ * data format with a resolution of 0.25 degrees celsius per unit.
++ * LSB 5 bits (D4..D0) share the same value as D5 and get discarded.
+ */
+ switch (p_lm70->chip) {
+ case LM70_CHIP_LM70:
+@@ -102,6 +109,10 @@ static ssize_t temp1_input_show(struct d
+ case LM70_CHIP_LM71:
+ val = ((int)raw / 4) * 3125 / 100;
+ break;
++
++ case LM70_CHIP_TMP125:
++ val = (sign_extend32(raw, 14) / 32) * 250;
++ break;
+ }
+
+ status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */
+@@ -136,6 +147,10 @@ static const struct of_device_id lm70_of
+ .data = (void *) LM70_CHIP_TMP122,
+ },
+ {
++ .compatible = "ti,tmp125",
++ .data = (void *) LM70_CHIP_TMP125,
++ },
++ {
+ .compatible = "ti,lm71",
+ .data = (void *) LM70_CHIP_LM71,
+ },
+@@ -184,6 +199,7 @@ static const struct spi_device_id lm70_i
+ { "lm70", LM70_CHIP_LM70 },
+ { "tmp121", LM70_CHIP_TMP121 },
+ { "tmp122", LM70_CHIP_TMP122 },
++ { "tmp125", LM70_CHIP_TMP125 },
+ { "lm71", LM70_CHIP_LM71 },
+ { "lm74", LM70_CHIP_LM74 },
+ { },
projects / openwrt / staging / stintel.git / commitdiff