sh: Use def_bool where possible.

Change occurances of:
	bool
	default X

to:
	def_bool X

Change ocurances of:
	bool "Foo"
	default X

to:
	def_bool X
	prompt "Foo"

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f645f8416f1c3c6d28d7177e27ae36d41a5e7eec..538631ca10a68285f69177c84f6a6def3de1fad7 100644 (file)
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -21,8 +21,7 @@ config SUPERH64
        def_bool y if CPU_SH5
 
 config RWSEM_GENERIC_SPINLOCK
-       bool
-       default y
+       def_bool y
 
 config RWSEM_XCHGADD_ALGORITHM
        bool
@@ -32,24 +31,19 @@ config GENERIC_BUG
        depends on BUG && SUPERH32
 
 config GENERIC_FIND_NEXT_BIT
-       bool
-       default y
+       def_bool y
 
 config GENERIC_HWEIGHT
-       bool
-       default y
+       def_bool y
 
 config GENERIC_HARDIRQS
-       bool
-       default y
+       def_bool y
 
 config GENERIC_IRQ_PROBE
-       bool
-       default y
+       def_bool y
 
 config GENERIC_CALIBRATE_DELAY
-       bool
-       default y
+       def_bool y
 
 config GENERIC_IOMAP
        bool
@@ -80,20 +74,16 @@ config ARCH_MAY_HAVE_PC_FDC
        bool
 
 config STACKTRACE_SUPPORT
-       bool
-       default y
+       def_bool y
 
 config LOCKDEP_SUPPORT
-       bool
-       default y
+       def_bool y
 
 config ARCH_HAS_ILOG2_U32
-       bool
-       default n
+       def_bool n
 
 config ARCH_HAS_ILOG2_U64
-       bool
-       default n
+       def_bool n
 
 config ARCH_NO_VIRT_TO_BUS
        def_bool y
@@ -530,25 +520,25 @@ source "arch/sh/boards/magicpanelr2/Kconfig"
 menu "Timer and clock configuration"
 
 config SH_TMU
-       bool "TMU timer support"
+       def_bool y
+       prompt "TMU timer support"
        depends on CPU_SH3 || CPU_SH4
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
-       default y
        help
          This enables the use of the TMU as the system timer.
 
 config SH_CMT
-       bool "CMT timer support"
+       def_bool y
+       prompt "CMT timer support"
        depends on CPU_SH2
-       default y
        help
          This enables the use of the CMT as the system timer.
 
 config SH_MTU2
-       bool "MTU2 timer support"
+       def_bool n
+       prompt "MTU2 timer support"
        depends on CPU_SH2A
-       default n
        help
          This enables the use of the MTU2 as the system timer.
 
@@ -612,9 +602,8 @@ source "arch/sh/drivers/Kconfig"
 endmenu
 
 config ISA_DMA_API
-       bool
+       def_bool y
        depends on SH_MPC1211
-       default y
 
 menu "Kernel features"
 

diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu
index ef398535caf8ef968b8d91128c6702a27325d06a..d850184d06942077d89875339fff59e3aa40d968 100644 (file)
--- a/arch/sh/Kconfig.cpu
+++ b/arch/sh/Kconfig.cpu
@@ -16,9 +16,9 @@ config CPU_BIG_ENDIAN
 endchoice
 
 config SH_FPU
-       bool "FPU support"
+       def_bool y
+       prompt "FPU support"
        depends on CPU_HAS_FPU
-       default y
        help
          Selecting this option will enable support for SH processors that
          have FPU units (ie, SH77xx).
@@ -30,18 +30,18 @@ config SH64_FPU_DENORM_FLUSH
        depends on SH_FPU && SUPERH64
 
 config SH_FPU_EMU
-       bool "FPU emulation support"
+       def_bool n
+       prompt "FPU emulation support"
        depends on !SH_FPU && EXPERIMENTAL
-       default n
        help
          Selecting this option will enable support for software FPU emulation.
          Most SH-3 users will want to say Y here, whereas most SH-4 users will
          want to say N.
 
 config SH_DSP
-       bool "DSP support"
+       def_bool y
+       prompt "DSP support"
        depends on CPU_HAS_DSP
-       default y
        help
          Selecting this option will enable support for SH processors that
          have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP).
@@ -49,9 +49,9 @@ config SH_DSP
          This option must be set in order to enable the DSP.
 
 config SH_ADC
-       bool "ADC support"
+       def_bool y
+       prompt "ADC support"
        depends on CPU_SH3
-       default y
        help
          Selecting this option will allow the Linux kernel to use SH3 on-chip
          ADC module.
@@ -76,9 +76,9 @@ config SPECULATIVE_EXECUTION
          If unsure, say N.
 
 config SH64_USER_MISALIGNED_FIXUP
-       bool "Fixup misaligned loads/stores occurring in user mode"
+       def_bool y
+       prompt "Fixup misaligned loads/stores occurring in user mode"
        depends on SUPERH64
-       default y
 
 config SH64_ID2815_WORKAROUND
        bool "Include workaround for SH5-101 cut2 silicon defect ID2815"

diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index b0dcb240d7985d133328228a501e50efcc60e845..2881d8471a17378af767cf81ed3b0336306b2f2d 100644 (file)
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -1,8 +1,7 @@
 menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
-       bool
-       default y
+       def_bool y
 
 source "lib/Kconfig.debug"
 
@@ -120,19 +119,19 @@ config COMPILE_OPTIONS
        depends on MORE_COMPILE_OPTIONS
 
 config KGDB_NMI
-       bool "Enter KGDB on NMI"
-       default n
+       def_bool n
+       prompt "Enter KGDB on NMI"
 
 config SH_KGDB_CONSOLE
-       bool "Console messages through GDB"
+       def_bool n
+       prompt "Console messages through GDB"
        depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y
        select SERIAL_CORE_CONSOLE
-       default n
 
 config KGDB_SYSRQ
-       bool "Allow SysRq 'G' to enter KGDB"
+       def_bool y
+       prompt "Allow SysRq 'G' to enter KGDB"
        depends on MAGIC_SYSRQ
-       default y
 
 comment "Serial port setup"