From the Netgear u-boot GPL code[1]. Bootloader always unconditionally
marks block 768, 1020 - 1023 as bad blocks on each boot. This may lead
to conflicts with the OpenWrt nand driver since these blocks may be good
blocks. In this case, U-boot will override the oob of these blocks so
that break the ubi volume. The system will be damaged after first reboot.
To avoid this issue, manually skip these blocks by using "mtd-concat".
[1] https://www.downloads.netgear.com/files/GPL/EX7300v2series-V1.0.0.146_gpl_src.tar.bz2.zip
Fixes: https://github.com/openwrt/openwrt/issues/8878
Tested-by: Yousaf <yousaf465@gmail.com>
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
(cherry picked from commit
12f53724c6575245cf8b2f0dc75d1b9b2e4fe488)
linux,default-trigger = "phy1tpt";
};
};
+
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ubi";
+ reg = <0x0 0x0>;
+ };
+ };
+ };
};
&spi {
reg = <0x0 0x400000>;
};
- partition@400000 {
- label = "ubi";
- reg = <0x400000 0x7c00000>;
+ ubiconcat0: partition@400000 {
+ label = "ubiconcat0";
+ reg = <0x400000 0x5c00000>;
+ };
+
+ ubiconcat1: partition@6020000 {
+ label = "ubiconcat1";
+ reg = <0x6020000 0x1f60000>;
};
+ /*
+ * U-boot always unconditionally marks block 768, 1020 - 1023 as
+ * bad blocks on each boot. To avoid conflicts with the nand
+ * driver, manually skip them.
+ */
};
};
};
define Device/netgear_wndr4300-v2
SOC := qca9563
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
+ first reboot issue. Please reflash factory image with nmrp or tftp.
DEVICE_MODEL := WNDR4300
DEVICE_VARIANT := v2
UIMAGE_MAGIC := 0x27051956
define Device/netgear_wndr4500-v3
SOC := qca9563
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
+ first reboot issue. Please reflash factory image with nmrp or tftp.
DEVICE_MODEL := WNDR4500
DEVICE_VARIANT := v3
UIMAGE_MAGIC := 0x27051956
--- /dev/null
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ netgear,wndr4300-v2|\
+ netgear,wndr4500-v3)
+ ucidef_set_compat_version "1.1"
+ ;;
+esac
+
+board_config_flush
+
+exit 0