config SWPHY
bool
-comment "MII PHY device drivers"
+comment "MDIO bus device drivers"
-config AQUANTIA_PHY
- tristate "Drivers for the Aquantia PHYs"
- ---help---
- Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
-
-config AT803X_PHY
- tristate "Drivers for Atheros AT803X PHYs"
- ---help---
- Currently supports the AT8030 and AT8035 model
+config MDIO_BCM_IPROC
+ tristate "Broadcom iProc MDIO bus controller"
+ depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the MDIO busses found in the
+ Broadcom iProc SoC's.
-config AMD_PHY
- tristate "Drivers for the AMD PHYs"
- ---help---
- Currently supports the am79c874
+config MDIO_BCM_UNIMAC
+ tristate "Broadcom UniMAC MDIO bus controller"
+ depends on HAS_IOMEM
+ help
+ This module provides a driver for the Broadcom UniMAC MDIO busses.
+ This hardware can be found in the Broadcom GENET Ethernet MAC
+ controllers as well as some Broadcom Ethernet switches such as the
+ Starfighter 2 switches.
-config MARVELL_PHY
- tristate "Drivers for Marvell PHYs"
- ---help---
- Currently has a driver for the 88E1011S
-
-config DAVICOM_PHY
- tristate "Drivers for Davicom PHYs"
- ---help---
- Currently supports dm9161e and dm9131
+config MDIO_BITBANG
+ tristate "Support for bitbanged MDIO buses"
+ help
+ This module implements the MDIO bus protocol in software,
+ for use by low level drivers that export the ability to
+ drive the relevant pins.
-config QSEMI_PHY
- tristate "Drivers for Quality Semiconductor PHYs"
- ---help---
- Currently supports the qs6612
+ If in doubt, say N.
-config LXT_PHY
- tristate "Drivers for the Intel LXT PHYs"
- ---help---
- Currently supports the lxt970, lxt971
+config MDIO_BUS_MUX
+ tristate
+ depends on OF_MDIO
+ help
+ This module provides a driver framework for MDIO bus
+ multiplexers which connect one of several child MDIO busses
+ to a parent bus. Switching between child busses is done by
+ device specific drivers.
-config CICADA_PHY
- tristate "Drivers for the Cicada PHYs"
- ---help---
- Currently supports the cis8204
+config MDIO_BUS_MUX_BCM_IPROC
+ tristate "Support for iProc based MDIO bus multiplexers"
+ depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
+ select MDIO_BUS_MUX
+ default ARCH_BCM_IPROC
+ help
+ This module provides a driver for MDIO bus multiplexers found in
+ iProc based Broadcom SoCs. This multiplexer connects one of several
+ child MDIO bus to a parent bus. Buses could be internal as well as
+ external and selection logic lies inside the same multiplexer.
-config VITESSE_PHY
- tristate "Drivers for the Vitesse PHYs"
- ---help---
- Currently supports the vsc8244
+config MDIO_BUS_MUX_GPIO
+ tristate "Support for GPIO controlled MDIO bus multiplexers"
+ depends on OF_GPIO && OF_MDIO
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via GPIO lines. The multiplexer connects one of
+ several child MDIO busses to a parent bus. Child bus
+ selection is under the control of GPIO lines.
-config TERANETICS_PHY
- tristate "Drivers for the Teranetics PHYs"
- ---help---
- Currently supports the Teranetics TN2020
+config MDIO_BUS_MUX_MMIOREG
+ tristate "Support for MMIO device-controlled MDIO bus multiplexers"
+ depends on OF_MDIO && HAS_IOMEM
+ select MDIO_BUS_MUX
+ help
+ This module provides a driver for MDIO bus multiplexers that
+ are controlled via a simple memory-mapped device, like an FPGA.
+ The multiplexer connects one of several child MDIO busses to a
+ parent bus. Child bus selection is under the control of one of
+ the FPGA's registers.
-config SMSC_PHY
- tristate "Drivers for SMSC PHYs"
- ---help---
- Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+ Currently, only 8-bit registers are supported.
-config BCM_NET_PHYLIB
+config MDIO_CAVIUM
tristate
-config BROADCOM_PHY
- tristate "Drivers for Broadcom PHYs"
- select BCM_NET_PHYLIB
+config MDIO_GPIO
+ tristate "Support for GPIO lib-based bitbanged MDIO buses"
+ depends on MDIO_BITBANG && GPIOLIB
---help---
- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
- BCM5481 and BCM5482 PHYs.
+ Supports GPIO lib-based MDIO busses.
-config BCM_CYGNUS_PHY
- tristate "Drivers for Broadcom Cygnus SoC internal PHY"
- depends on ARCH_BCM_CYGNUS || COMPILE_TEST
- depends on MDIO_BCM_IPROC
- select BCM_NET_PHYLIB
+ To compile this driver as a module, choose M here: the module
+ will be called mdio-gpio.
+
+config MDIO_HISI_FEMAC
+ tristate "Hisilicon FEMAC MDIO bus controller"
+ depends on HAS_IOMEM && OF_MDIO
+ help
+ This module provides a driver for the MDIO busses found in the
+ Hisilicon SoC that have an Fast Ethernet MAC.
+
+config MDIO_MOXART
+ tristate "MOXA ART MDIO interface support"
+ depends on ARCH_MOXART
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the MOXA ART SoC
+
+config MDIO_OCTEON
+ tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
+ depends on 64BIT
+ depends on HAS_IOMEM
+ select MDIO_CAVIUM
+ help
+ This module provides a driver for the Octeon and ThunderX MDIO
+ buses. It is required by the Octeon and ThunderX ethernet device
+ drivers on some systems.
+
+config MDIO_SUN4I
+ tristate "Allwinner sun4i MDIO interface support"
+ depends on ARCH_SUNXI
+ help
+ This driver supports the MDIO interface found in the network
+ interface units of the Allwinner SoC that have an EMAC (A10,
+ A12, A10s, etc.)
+
+config MDIO_THUNDER
+ tristate "Support for MDIO buses on ThunderX SOCs"
+ depends on 64BIT
+ depends on PCI
+ select MDIO_CAVIUM
+ help
+ This driver supports the MDIO interfaces found on Cavium
+ ThunderX SoCs when the MDIO bus device appears as a PCI
+ device.
+
+config MDIO_XGENE
+ tristate "APM X-Gene SoC MDIO bus controller"
+ help
+ This module provides a driver for the MDIO busses found in the
+ APM X-Gene SoC's.
+
+comment "MII PHY device drivers"
+
+config AMD_PHY
+ tristate "Drivers for the AMD PHYs"
---help---
- This PHY driver is for the 1G internal PHYs of the Broadcom
- Cygnus Family SoC.
+ Currently supports the am79c874
- Currently supports internal PHY's used in the BCM11300,
- BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
- BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+config AQUANTIA_PHY
+ tristate "Drivers for the Aquantia PHYs"
+ ---help---
+ Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
+
+config AT803X_PHY
+ tristate "Drivers for Atheros AT803X PHYs"
+ ---help---
+ Currently supports the AT8030 and AT8035 model
config BCM63XX_PHY
tristate "Drivers for Broadcom 63xx SOCs internal PHY"
help
Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
-config ICPLUS_PHY
- tristate "Drivers for ICPlus PHYs"
+config BCM_CYGNUS_PHY
+ tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+ depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+ depends on MDIO_BCM_IPROC
+ select BCM_NET_PHYLIB
---help---
- Currently supports the IP175C and IP1001 PHYs.
+ This PHY driver is for the 1G internal PHYs of the Broadcom
+ Cygnus Family SoC.
-config REALTEK_PHY
- tristate "Drivers for Realtek PHYs"
- ---help---
- Supports the Realtek 821x PHY.
+ Currently supports internal PHY's used in the BCM11300,
+ BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+ BCM58303 & BCM58305 Broadcom Cygnus SoCs.
-config NATIONAL_PHY
- tristate "Drivers for National Semiconductor PHYs"
- ---help---
- Currently supports the DP83865 PHY.
+config BCM_NET_PHYLIB
+ tristate
-config STE10XP
- tristate "Driver for STMicroelectronics STe10Xp PHYs"
+config BROADCOM_PHY
+ tristate "Drivers for Broadcom PHYs"
+ select BCM_NET_PHYLIB
---help---
- This is the driver for the STe100p and STe101p PHYs.
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
+ BCM5481 and BCM5482 PHYs.
-config LSI_ET1011C_PHY
- tristate "Driver for LSI ET1011C PHY"
+config CICADA_PHY
+ tristate "Drivers for the Cicada PHYs"
---help---
- Supports the LSI ET1011C PHY.
+ Currently supports the cis8204
-config MICREL_PHY
- tristate "Driver for Micrel PHYs"
+config DAVICOM_PHY
+ tristate "Drivers for Davicom PHYs"
---help---
- Supports the KSZ9021, VSC8201, KS8001 PHYs.
+ Currently supports dm9161e and dm9131
config DP83848_PHY
tristate "Driver for Texas Instruments DP83848 PHY"
---help---
Currently supports the DP83867 PHY.
-config MICROCHIP_PHY
- tristate "Drivers for Microchip PHYs"
- help
- Supports the LAN88XX PHYs.
-
config FIXED_PHY
tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB
Currently tested with mpc866ads and mpc8349e-mitx.
-config MDIO_BITBANG
- tristate "Support for bitbanged MDIO buses"
- help
- This module implements the MDIO bus protocol in software,
- for use by low level drivers that export the ability to
- drive the relevant pins.
-
- If in doubt, say N.
-
-config MDIO_GPIO
- tristate "Support for GPIO lib-based bitbanged MDIO buses"
- depends on MDIO_BITBANG && GPIOLIB
+config ICPLUS_PHY
+ tristate "Drivers for ICPlus PHYs"
---help---
- Supports GPIO lib-based MDIO busses.
-
- To compile this driver as a module, choose M here: the module
- will be called mdio-gpio.
-
-config MDIO_CAVIUM
- tristate
-
-config MDIO_OCTEON
- tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
- depends on 64BIT
- depends on HAS_IOMEM
- select MDIO_CAVIUM
- help
- This module provides a driver for the Octeon and ThunderX MDIO
- buses. It is required by the Octeon and ThunderX ethernet device
- drivers on some systems.
-
-config MDIO_THUNDER
- tristate "Support for MDIO buses on ThunderX SOCs"
- depends on 64BIT
- depends on PCI
- select MDIO_CAVIUM
- help
- This driver supports the MDIO interfaces found on Cavium
- ThunderX SoCs when the MDIO bus device appears as a PCI
- device.
-
-
-config MDIO_SUN4I
- tristate "Allwinner sun4i MDIO interface support"
- depends on ARCH_SUNXI
- help
- This driver supports the MDIO interface found in the network
- interface units of the Allwinner SoC that have an EMAC (A10,
- A12, A10s, etc.)
-
-config MDIO_MOXART
- tristate "MOXA ART MDIO interface support"
- depends on ARCH_MOXART
- help
- This driver supports the MDIO interface found in the network
- interface units of the MOXA ART SoC
-
-config MDIO_BUS_MUX
- tristate
- depends on OF_MDIO
- help
- This module provides a driver framework for MDIO bus
- multiplexers which connect one of several child MDIO busses
- to a parent bus. Switching between child busses is done by
- device specific drivers.
-
-config MDIO_BUS_MUX_GPIO
- tristate "Support for GPIO controlled MDIO bus multiplexers"
- depends on OF_GPIO && OF_MDIO
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexers that
- are controlled via GPIO lines. The multiplexer connects one of
- several child MDIO busses to a parent bus. Child bus
- selection is under the control of GPIO lines.
-
-config MDIO_BUS_MUX_MMIOREG
- tristate "Support for MMIO device-controlled MDIO bus multiplexers"
- depends on OF_MDIO && HAS_IOMEM
- select MDIO_BUS_MUX
- help
- This module provides a driver for MDIO bus multiplexers that
- are controlled via a simple memory-mapped device, like an FPGA.
- The multiplexer connects one of several child MDIO busses to a
- parent bus. Child bus selection is under the control of one of
- the FPGA's registers.
-
- Currently, only 8-bit registers are supported.
-
-config MDIO_BUS_MUX_BCM_IPROC
- tristate "Support for iProc based MDIO bus multiplexers"
- depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
- select MDIO_BUS_MUX
- default ARCH_BCM_IPROC
- help
- This module provides a driver for MDIO bus multiplexers found in
- iProc based Broadcom SoCs. This multiplexer connects one of several
- child MDIO bus to a parent bus. Buses could be internal as well as
- external and selection logic lies inside the same multiplexer.
-
-config MDIO_BCM_UNIMAC
- tristate "Broadcom UniMAC MDIO bus controller"
- depends on HAS_IOMEM
- help
- This module provides a driver for the Broadcom UniMAC MDIO busses.
- This hardware can be found in the Broadcom GENET Ethernet MAC
- controllers as well as some Broadcom Ethernet switches such as the
- Starfighter 2 switches.
-
-config MDIO_BCM_IPROC
- tristate "Broadcom iProc MDIO bus controller"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
- depends on HAS_IOMEM && OF_MDIO
- help
- This module provides a driver for the MDIO busses found in the
- Broadcom iProc SoC's.
+ Currently supports the IP175C and IP1001 PHYs.
config INTEL_XWAY_PHY
tristate "Driver for Intel XWAY PHYs"
PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
-config MDIO_HISI_FEMAC
- tristate "Hisilicon FEMAC MDIO bus controller"
- depends on HAS_IOMEM && OF_MDIO
- help
- This module provides a driver for the MDIO busses found in the
- Hisilicon SoC that have an Fast Ethernet MAC.
+config LSI_ET1011C_PHY
+ tristate "Driver for LSI ET1011C PHY"
+ ---help---
+ Supports the LSI ET1011C PHY.
-config MDIO_XGENE
- tristate "APM X-Gene SoC MDIO bus controller"
+config LXT_PHY
+ tristate "Drivers for the Intel LXT PHYs"
+ ---help---
+ Currently supports the lxt970, lxt971
+
+config MARVELL_PHY
+ tristate "Drivers for Marvell PHYs"
+ ---help---
+ Currently has a driver for the 88E1011S
+
+config MICREL_PHY
+ tristate "Driver for Micrel PHYs"
+ ---help---
+ Supports the KSZ9021, VSC8201, KS8001 PHYs.
+
+config MICROCHIP_PHY
+ tristate "Drivers for Microchip PHYs"
help
- This module provides a driver for the MDIO busses found in the
- APM X-Gene SoC's.
+ Supports the LAN88XX PHYs.
config MICROSEMI_PHY
tristate "Drivers for the Microsemi PHYs"
---help---
Currently supports the VSC8531 and VSC8541 PHYs
+config NATIONAL_PHY
+ tristate "Drivers for National Semiconductor PHYs"
+ ---help---
+ Currently supports the DP83865 PHY.
+
+config QSEMI_PHY
+ tristate "Drivers for Quality Semiconductor PHYs"
+ ---help---
+ Currently supports the qs6612
+
+config REALTEK_PHY
+ tristate "Drivers for Realtek PHYs"
+ ---help---
+ Supports the Realtek 821x PHY.
+
+config SMSC_PHY
+ tristate "Drivers for SMSC PHYs"
+ ---help---
+ Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
+
+config STE10XP
+ tristate "Driver for STMicroelectronics STe10Xp PHYs"
+ ---help---
+ This is the driver for the STe100p and STe101p PHYs.
+
+config TERANETICS_PHY
+ tristate "Drivers for the Teranetics PHYs"
+ ---help---
+ Currently supports the Teranetics TN2020
+
+config VITESSE_PHY
+ tristate "Drivers for the Vitesse PHYs"
+ ---help---
+ Currently supports the vsc8244
+
config XILINX_GMII2RGMII
tristate "Xilinx GMII2RGMII converter driver"
---help---
-# Makefile for Linux PHY drivers
+# Makefile for Linux PHY drivers and MDIO bus drivers
libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
libphy-$(CONFIG_SWPHY) += swphy.o
obj-$(CONFIG_PHYLIB) += libphy.o
+
+obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
+obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
+obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
+obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
+obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
+obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
+obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
+obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
+obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
+obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
+obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
+obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
+obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
+obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
+obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+
+obj-$(CONFIG_AMD_PHY) += amd.o
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
-obj-$(CONFIG_MARVELL_PHY) += marvell.o
-obj-$(CONFIG_DAVICOM_PHY) += davicom.o
-obj-$(CONFIG_CICADA_PHY) += cicada.o
-obj-$(CONFIG_LXT_PHY) += lxt.o
-obj-$(CONFIG_QSEMI_PHY) += qsemi.o
-obj-$(CONFIG_SMSC_PHY) += smsc.o
-obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
-obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
-obj-$(CONFIG_VITESSE_PHY) += vitesse.o
-obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
-obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_AT803X_PHY) += at803x.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
-obj-$(CONFIG_ICPLUS_PHY) += icplus.o
-obj-$(CONFIG_REALTEK_PHY) += realtek.o
-obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
-obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
-obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
-obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
-obj-$(CONFIG_NATIONAL_PHY) += national.o
+obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
+obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
+obj-$(CONFIG_CICADA_PHY) += cicada.o
+obj-$(CONFIG_DAVICOM_PHY) += davicom.o
obj-$(CONFIG_DP83640_PHY) += dp83640.o
obj-$(CONFIG_DP83848_PHY) += dp83848.o
obj-$(CONFIG_DP83867_PHY) += dp83867.o
-obj-$(CONFIG_STE10XP) += ste10Xp.o
-obj-$(CONFIG_MICREL_PHY) += micrel.o
-obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
-obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
-obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
+obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
+obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
+obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
+obj-$(CONFIG_LXT_PHY) += lxt.o
+obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
-obj-$(CONFIG_AT803X_PHY) += at803x.o
-obj-$(CONFIG_AMD_PHY) += amd.o
-obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
-obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
-obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
-obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
-obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
-obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
-obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
+obj-$(CONFIG_MICREL_PHY) += micrel.o
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
-obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
-obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
-obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
-obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
+obj-$(CONFIG_NATIONAL_PHY) += national.o
+obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+obj-$(CONFIG_REALTEK_PHY) += realtek.o
+obj-$(CONFIG_SMSC_PHY) += smsc.o
+obj-$(CONFIG_STE10XP) += ste10Xp.o
+obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
+obj-$(CONFIG_VITESSE_PHY) += vitesse.o
obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
projects / openwrt / staging / blogic.git / commitdiff