+++ /dev/null
-/*
- * Atheros AP9X reference board PCI initialization
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-#include "dev-ap9x-pci.h"
-#include "pci-ath9k-fixup.h"
-#include "pci.h"
-
-static struct ath9k_platform_data ap9x_wmac0_data = {
- .led_pin = -1,
-};
-static struct ath9k_platform_data ap9x_wmac1_data = {
- .led_pin = -1,
-};
-static char ap9x_wmac0_mac[6];
-static char ap9x_wmac1_mac[6];
-
-__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
-{
- switch (wmac) {
- case 0:
- ap9x_wmac0_data.led_pin = pin;
- break;
- case 1:
- ap9x_wmac1_data.led_pin = pin;
- break;
- }
-}
-
-__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
-{
- switch (wmac) {
- case 0:
- ap9x_wmac0_data.gpio_mask = mask;
- ap9x_wmac0_data.gpio_val = val;
- break;
- case 1:
- ap9x_wmac1_data.gpio_mask = mask;
- ap9x_wmac1_data.gpio_val = val;
- break;
- }
-}
-
-__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
- int num_leds)
-{
- switch (wmac) {
- case 0:
- ap9x_wmac0_data.leds = leds;
- ap9x_wmac0_data.num_leds = num_leds;
- break;
- case 1:
- ap9x_wmac1_data.leds = leds;
- ap9x_wmac1_data.num_leds = num_leds;
- break;
- }
-}
-
-static int ap91_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &ap9x_wmac0_data;
- break;
- }
-
- return 0;
-}
-
-__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
-{
- if (cal_data)
- memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
- sizeof(ap9x_wmac0_data.eeprom_data));
-
- if (mac_addr) {
- memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
- ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
- }
-
- ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
- ath79_register_pci();
-
- pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
-}
-
-static int ap94_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 17:
- dev->dev.platform_data = &ap9x_wmac0_data;
- break;
-
- case 18:
- dev->dev.platform_data = &ap9x_wmac1_data;
- break;
- }
-
- return 0;
-}
-
-__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1)
-{
- if (cal_data0)
- memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
- sizeof(ap9x_wmac0_data.eeprom_data));
-
- if (cal_data1)
- memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
- sizeof(ap9x_wmac1_data.eeprom_data));
-
- if (mac_addr0) {
- memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
- ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
- }
-
- if (mac_addr1) {
- memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
- ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
- }
-
- ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
- ath79_register_pci();
-
- pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
- pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
-}
+++ /dev/null
-/*
- * Atheros AP9X reference board PCI initialization
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_AP9X_PCI_H
-#define _ATH79_DEV_AP9X_PCI_H
-
-struct gpio_led;
-
-#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
-void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
-void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
-void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
- int num_leds);
-
-void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
-void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1);
-
-#else
-static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
-static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
- u32 mask, u32 val) {}
-static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
- struct gpio_led *leds,
- int num_leds) {}
-
-static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
-static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1) {}
-#endif
-
-#endif /* _ATH79_DEV_AP9X_PCI_H */
-
+++ /dev/null
-/*
- * Atheros AR71xx DSA switch device support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-
-static struct platform_device ar71xx_dsa_switch_device = {
- .name = "dsa",
- .id = 0,
-};
-
-void __init ath79_register_dsa(struct device *netdev,
- struct device *miidev,
- struct dsa_platform_data *d)
-{
- int i;
-
- d->netdev = netdev;
- for (i = 0; i < d->nr_chips; i++)
- d->chip[i].mii_bus = miidev;
-
- ar71xx_dsa_switch_device.dev.platform_data = d;
- platform_device_register(&ar71xx_dsa_switch_device);
-}
+++ /dev/null
-/*
- * Atheros AR71xx DSA switch device support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_DSA_H
-#define _ATH79_DEV_DSA_H
-
-#include <net/dsa.h>
-
-void ath79_register_dsa(struct device *netdev,
- struct device *miidev,
- struct dsa_platform_data *d);
-
-#endif /* _ATH79_DEV_DSA_H */
+++ /dev/null
-/*
- * Atheros AR71xx SoC platform devices
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros 2.6.15 BSP
- * Parts of this file are based on Atheros 2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/irq.h>
-
-#include "common.h"
-#include "dev-eth.h"
-
-unsigned char ath79_mac_base[ETH_ALEN] __initdata;
-
-static struct resource ath79_mdio0_resources[] = {
- {
- .name = "mdio_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE0_BASE,
- .end = AR71XX_GE0_BASE + 0x200 - 1,
- }
-};
-
-static struct ag71xx_mdio_platform_data ath79_mdio0_data;
-
-struct platform_device ath79_mdio0_device = {
- .name = "ag71xx-mdio",
- .id = 0,
- .resource = ath79_mdio0_resources,
- .num_resources = ARRAY_SIZE(ath79_mdio0_resources),
- .dev = {
- .platform_data = &ath79_mdio0_data,
- },
-};
-
-static struct resource ath79_mdio1_resources[] = {
- {
- .name = "mdio_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE1_BASE,
- .end = AR71XX_GE1_BASE + 0x200 - 1,
- }
-};
-
-static struct ag71xx_mdio_platform_data ath79_mdio1_data;
-
-struct platform_device ath79_mdio1_device = {
- .name = "ag71xx-mdio",
- .id = 1,
- .resource = ath79_mdio1_resources,
- .num_resources = ARRAY_SIZE(ath79_mdio1_resources),
- .dev = {
- .platform_data = &ath79_mdio1_data,
- },
-};
-
-static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
-
- t = __raw_readl(base + cfg_reg);
- t &= ~(3 << shift);
- t |= (2 << shift);
- __raw_writel(t, base + cfg_reg);
- udelay(100);
-
- __raw_writel(pll_val, base + pll_reg);
-
- t |= (3 << shift);
- __raw_writel(t, base + cfg_reg);
- udelay(100);
-
- t &= ~(3 << shift);
- __raw_writel(t, base + cfg_reg);
- udelay(100);
-
- printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
- (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
-
- iounmap(base);
-}
-
-static void __init ath79_mii_ctrl_set_if(unsigned int reg,
- unsigned int mii_if)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
-
- t = __raw_readl(base + reg);
- t &= ~(AR71XX_MII_CTRL_IF_MASK);
- t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
- __raw_writel(t, base + reg);
-
- iounmap(base);
-}
-
-static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
-{
- void __iomem *base;
- unsigned int mii_speed;
- u32 t;
-
- switch (speed) {
- case SPEED_10:
- mii_speed = AR71XX_MII_CTRL_SPEED_10;
- break;
- case SPEED_100:
- mii_speed = AR71XX_MII_CTRL_SPEED_100;
- break;
- case SPEED_1000:
- mii_speed = AR71XX_MII_CTRL_SPEED_1000;
- break;
- default:
- BUG();
- }
-
- base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
-
- t = __raw_readl(base + reg);
- t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
- t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT;
- __raw_writel(t, base + reg);
-
- iounmap(base);
-}
-
-void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
-{
- struct platform_device *mdio_dev;
- struct ag71xx_mdio_platform_data *mdio_data;
- unsigned int max_id;
-
- if (ath79_soc == ATH79_SOC_AR9341 ||
- ath79_soc == ATH79_SOC_AR9342 ||
- ath79_soc == ATH79_SOC_AR9344)
- max_id = 1;
- else
- max_id = 0;
-
- if (id > max_id) {
- printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
- return;
- }
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- mdio_dev = &ath79_mdio1_device;
- mdio_data = &ath79_mdio1_data;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- if (id == 0) {
- mdio_dev = &ath79_mdio0_device;
- mdio_data = &ath79_mdio0_data;
- } else {
- mdio_dev = &ath79_mdio1_device;
- mdio_data = &ath79_mdio1_data;
- }
- break;
-
- case ATH79_SOC_AR7242:
- ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
- AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
- AR71XX_ETH0_PLL_SHIFT);
- /* fall through */
- default:
- mdio_dev = &ath79_mdio0_device;
- mdio_data = &ath79_mdio0_data;
- break;
- }
-
- mdio_data->phy_mask = phy_mask;
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- mdio_data->is_ar7240 = 1;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- if (id == 1)
- mdio_data->is_ar7240 = 1;
- break;
-
- default:
- break;
- }
-
- platform_device_register(mdio_dev);
-}
-
-struct ath79_eth_pll_data ath79_eth0_pll_data;
-struct ath79_eth_pll_data ath79_eth1_pll_data;
-
-static u32 ath79_get_eth_pll(unsigned int mac, int speed)
-{
- struct ath79_eth_pll_data *pll_data;
- u32 pll_val;
-
- switch (mac) {
- case 0:
- pll_data = &ath79_eth0_pll_data;
- break;
- case 1:
- pll_data = &ath79_eth1_pll_data;
- break;
- default:
- BUG();
- }
-
- switch (speed) {
- case SPEED_10:
- pll_val = pll_data->pll_10;
- break;
- case SPEED_100:
- pll_val = pll_data->pll_100;
- break;
- case SPEED_1000:
- pll_val = pll_data->pll_1000;
- break;
- default:
- BUG();
- }
-
- return pll_val;
-}
-
-static void ath79_set_speed_ge0(int speed)
-{
- u32 val = ath79_get_eth_pll(0, speed);
-
- ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
- val, AR71XX_ETH0_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
-}
-
-static void ath79_set_speed_ge1(int speed)
-{
- u32 val = ath79_get_eth_pll(1, speed);
-
- ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
- val, AR71XX_ETH1_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
-}
-
-static void ar724x_set_speed_ge0(int speed)
-{
- /* TODO */
-}
-
-static void ar724x_set_speed_ge1(int speed)
-{
- /* TODO */
-}
-
-static void ar7242_set_speed_ge0(int speed)
-{
- u32 val = ath79_get_eth_pll(0, speed);
- void __iomem *base;
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
- __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
- iounmap(base);
-}
-
-static void ar91xx_set_speed_ge0(int speed)
-{
- u32 val = ath79_get_eth_pll(0, speed);
-
- ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
- val, AR913X_ETH0_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
-}
-
-static void ar91xx_set_speed_ge1(int speed)
-{
- u32 val = ath79_get_eth_pll(1, speed);
-
- ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
- val, AR913X_ETH1_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
-}
-
-static void ar933x_set_speed_ge0(int speed)
-{
- /* TODO */
-}
-
-static void ar933x_set_speed_ge1(int speed)
-{
- /* TODO */
-}
-
-static void ar934x_set_speed_ge0(int speed)
-{
- /* TODO */
-}
-
-static void ar934x_set_speed_ge1(int speed)
-{
- /* TODO */
-}
-
-static void ath79_ddr_flush_ge0(void)
-{
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
-}
-
-static void ath79_ddr_flush_ge1(void)
-{
- ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
-}
-
-static void ar724x_ddr_flush_ge0(void)
-{
- ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar724x_ddr_flush_ge1(void)
-{
- ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
-}
-
-static void ar91xx_ddr_flush_ge0(void)
-{
- ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar91xx_ddr_flush_ge1(void)
-{
- ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
-}
-
-static void ar933x_ddr_flush_ge0(void)
-{
- ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar933x_ddr_flush_ge1(void)
-{
- ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
-}
-
-static void ar934x_ddr_flush_ge0(void)
-{
- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0);
-}
-
-static void ar934x_ddr_flush_ge1(void)
-{
- ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1);
-}
-
-static struct resource ath79_eth0_resources[] = {
- {
- .name = "mac_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE0_BASE,
- .end = AR71XX_GE0_BASE + 0x200 - 1,
- }, {
- .name = "mac_irq",
- .flags = IORESOURCE_IRQ,
- .start = ATH79_CPU_IRQ_GE0,
- .end = ATH79_CPU_IRQ_GE0,
- },
-};
-
-struct ag71xx_platform_data ath79_eth0_data = {
- .reset_bit = AR71XX_RESET_GE0_MAC,
-};
-
-struct platform_device ath79_eth0_device = {
- .name = "ag71xx",
- .id = 0,
- .resource = ath79_eth0_resources,
- .num_resources = ARRAY_SIZE(ath79_eth0_resources),
- .dev = {
- .platform_data = &ath79_eth0_data,
- },
-};
-
-static struct resource ath79_eth1_resources[] = {
- {
- .name = "mac_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE1_BASE,
- .end = AR71XX_GE1_BASE + 0x200 - 1,
- }, {
- .name = "mac_irq",
- .flags = IORESOURCE_IRQ,
- .start = ATH79_CPU_IRQ_GE1,
- .end = ATH79_CPU_IRQ_GE1,
- },
-};
-
-struct ag71xx_platform_data ath79_eth1_data = {
- .reset_bit = AR71XX_RESET_GE1_MAC,
-};
-
-struct platform_device ath79_eth1_device = {
- .name = "ag71xx",
- .id = 1,
- .resource = ath79_eth1_resources,
- .num_resources = ARRAY_SIZE(ath79_eth1_resources),
- .dev = {
- .platform_data = &ath79_eth1_data,
- },
-};
-
-struct ag71xx_switch_platform_data ath79_switch_data;
-
-#define AR71XX_PLL_VAL_1000 0x00110000
-#define AR71XX_PLL_VAL_100 0x00001099
-#define AR71XX_PLL_VAL_10 0x00991099
-
-#define AR724X_PLL_VAL_1000 0x00110000
-#define AR724X_PLL_VAL_100 0x00001099
-#define AR724X_PLL_VAL_10 0x00991099
-
-#define AR7242_PLL_VAL_1000 0x16000000
-#define AR7242_PLL_VAL_100 0x00000101
-#define AR7242_PLL_VAL_10 0x00001616
-
-#define AR913X_PLL_VAL_1000 0x1a000000
-#define AR913X_PLL_VAL_100 0x13000a44
-#define AR913X_PLL_VAL_10 0x00441099
-
-#define AR933X_PLL_VAL_1000 0x00110000
-#define AR933X_PLL_VAL_100 0x00001099
-#define AR933X_PLL_VAL_10 0x00991099
-
-#define AR934X_PLL_VAL_1000 0x00110000
-#define AR934X_PLL_VAL_100 0x00001099
-#define AR934X_PLL_VAL_10 0x00991099
-
-static void __init ath79_init_eth_pll_data(unsigned int id)
-{
- struct ath79_eth_pll_data *pll_data;
- u32 pll_10, pll_100, pll_1000;
-
- switch (id) {
- case 0:
- pll_data = &ath79_eth0_pll_data;
- break;
- case 1:
- pll_data = &ath79_eth1_pll_data;
- break;
- default:
- BUG();
- }
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- pll_10 = AR71XX_PLL_VAL_10;
- pll_100 = AR71XX_PLL_VAL_100;
- pll_1000 = AR71XX_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- pll_10 = AR724X_PLL_VAL_10;
- pll_100 = AR724X_PLL_VAL_100;
- pll_1000 = AR724X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR7242:
- pll_10 = AR7242_PLL_VAL_10;
- pll_100 = AR7242_PLL_VAL_100;
- pll_1000 = AR7242_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR9130:
- case ATH79_SOC_AR9132:
- pll_10 = AR913X_PLL_VAL_10;
- pll_100 = AR913X_PLL_VAL_100;
- pll_1000 = AR913X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- pll_10 = AR933X_PLL_VAL_10;
- pll_100 = AR933X_PLL_VAL_100;
- pll_1000 = AR933X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- pll_10 = AR934X_PLL_VAL_10;
- pll_100 = AR934X_PLL_VAL_100;
- pll_1000 = AR934X_PLL_VAL_1000;
- break;
-
- default:
- BUG();
- }
-
- if (!pll_data->pll_10)
- pll_data->pll_10 = pll_10;
-
- if (!pll_data->pll_100)
- pll_data->pll_100 = pll_100;
-
- if (!pll_data->pll_1000)
- pll_data->pll_1000 = pll_1000;
-}
-
-static int __init ath79_setup_phy_if_mode(unsigned int id,
- struct ag71xx_platform_data *pdata)
-{
- unsigned int mii_if;
-
- switch (id) {
- case 0:
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- case ATH79_SOC_AR9130:
- case ATH79_SOC_AR9132:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- mii_if = AR71XX_MII0_CTRL_IF_MII;
- break;
- case PHY_INTERFACE_MODE_GMII:
- mii_if = AR71XX_MII0_CTRL_IF_GMII;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- mii_if = AR71XX_MII0_CTRL_IF_RGMII;
- break;
- case PHY_INTERFACE_MODE_RMII:
- mii_if = AR71XX_MII0_CTRL_IF_RMII;
- break;
- default:
- return -EINVAL;
- }
- ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
- break;
-
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
- break;
-
- case ATH79_SOC_AR7242:
- /* FIXME */
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_GMII:
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RMII:
- break;
- default:
- return -EINVAL;
- }
- break;
-
- default:
- BUG();
- }
- break;
- case 1:
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- case ATH79_SOC_AR9130:
- case ATH79_SOC_AR9132:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_RMII:
- mii_if = AR71XX_MII1_CTRL_IF_RMII;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- mii_if = AR71XX_MII1_CTRL_IF_RGMII;
- break;
- default:
- return -EINVAL;
- }
- ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
- break;
-
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
- break;
-
- case ATH79_SOC_AR7242:
- /* FIXME */
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_GMII:
- break;
- default:
- return -EINVAL;
- }
- break;
-
- default:
- BUG();
- }
- break;
- }
-
- return 0;
-}
-
-static int ath79_eth_instance __initdata;
-void __init ath79_register_eth(unsigned int id)
-{
- struct platform_device *pdev;
- struct ag71xx_platform_data *pdata;
- int err;
-
- if (id > 1) {
- printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
- return;
- }
-
- ath79_init_eth_pll_data(id);
-
- if (id == 0)
- pdev = &ath79_eth0_device;
- else
- pdev = &ath79_eth1_device;
-
- pdata = pdev->dev.platform_data;
-
- err = ath79_setup_phy_if_mode(id, pdata);
- if (err) {
- printk(KERN_ERR
- "ar71xx: invalid PHY interface mode for GE%u\n", id);
- return;
- }
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- if (id == 0) {
- pdata->ddr_flush = ath79_ddr_flush_ge0;
- pdata->set_speed = ath79_set_speed_ge0;
- } else {
- pdata->ddr_flush = ath79_ddr_flush_ge1;
- pdata->set_speed = ath79_set_speed_ge1;
- }
- break;
-
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- if (id == 0) {
- pdata->ddr_flush = ath79_ddr_flush_ge0;
- pdata->set_speed = ath79_set_speed_ge0;
- } else {
- pdata->ddr_flush = ath79_ddr_flush_ge1;
- pdata->set_speed = ath79_set_speed_ge1;
- }
- pdata->has_gbit = 1;
- break;
-
- case ATH79_SOC_AR7242:
- if (id == 0) {
- pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
- AR71XX_RESET_GE0_PHY;
- pdata->ddr_flush = ar724x_ddr_flush_ge0;
- pdata->set_speed = ar7242_set_speed_ge0;
- } else {
- pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
- AR71XX_RESET_GE1_PHY;
- pdata->ddr_flush = ar724x_ddr_flush_ge1;
- pdata->set_speed = ar724x_set_speed_ge1;
- }
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
-
- if (!pdata->fifo_cfg1)
- pdata->fifo_cfg1 = 0x0010ffff;
- if (!pdata->fifo_cfg2)
- pdata->fifo_cfg2 = 0x015500aa;
- if (!pdata->fifo_cfg3)
- pdata->fifo_cfg3 = 0x01f00140;
- break;
-
- case ATH79_SOC_AR7241:
- if (id == 0)
- pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
- else
- pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
- /* fall through */
- case ATH79_SOC_AR7240:
- if (id == 0) {
- pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
- pdata->ddr_flush = ar724x_ddr_flush_ge0;
- pdata->set_speed = ar724x_set_speed_ge0;
-
- pdata->phy_mask = BIT(4);
- } else {
- pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
- pdata->ddr_flush = ar724x_ddr_flush_ge1;
- pdata->set_speed = ar724x_set_speed_ge1;
-
- pdata->speed = SPEED_1000;
- pdata->duplex = DUPLEX_FULL;
- pdata->switch_data = &ath79_switch_data;
- }
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
- if (ath79_soc == ATH79_SOC_AR7240)
- pdata->is_ar7240 = 1;
-
- if (!pdata->fifo_cfg1)
- pdata->fifo_cfg1 = 0x0010ffff;
- if (!pdata->fifo_cfg2)
- pdata->fifo_cfg2 = 0x015500aa;
- if (!pdata->fifo_cfg3)
- pdata->fifo_cfg3 = 0x01f00140;
- break;
-
- case ATH79_SOC_AR9130:
- if (id == 0) {
- pdata->ddr_flush = ar91xx_ddr_flush_ge0;
- pdata->set_speed = ar91xx_set_speed_ge0;
- } else {
- pdata->ddr_flush = ar91xx_ddr_flush_ge1;
- pdata->set_speed = ar91xx_set_speed_ge1;
- }
- pdata->is_ar91xx = 1;
- break;
-
- case ATH79_SOC_AR9132:
- if (id == 0) {
- pdata->ddr_flush = ar91xx_ddr_flush_ge0;
- pdata->set_speed = ar91xx_set_speed_ge0;
- } else {
- pdata->ddr_flush = ar91xx_ddr_flush_ge1;
- pdata->set_speed = ar91xx_set_speed_ge1;
- }
- pdata->is_ar91xx = 1;
- pdata->has_gbit = 1;
- break;
-
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- if (id == 0) {
- pdata->reset_bit = AR933X_RESET_GE0_MAC |
- AR933X_RESET_GE0_MDIO;
- pdata->ddr_flush = ar933x_ddr_flush_ge0;
- pdata->set_speed = ar933x_set_speed_ge0;
-
- pdata->phy_mask = BIT(4);
- } else {
- pdata->reset_bit = AR933X_RESET_GE1_MAC |
- AR933X_RESET_GE1_MDIO;
- pdata->ddr_flush = ar933x_ddr_flush_ge1;
- pdata->set_speed = ar933x_set_speed_ge1;
-
- pdata->speed = SPEED_1000;
- pdata->duplex = DUPLEX_FULL;
- pdata->switch_data = &ath79_switch_data;
- }
-
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
-
- if (!pdata->fifo_cfg1)
- pdata->fifo_cfg1 = 0x0010ffff;
- if (!pdata->fifo_cfg2)
- pdata->fifo_cfg2 = 0x015500aa;
- if (!pdata->fifo_cfg3)
- pdata->fifo_cfg3 = 0x01f00140;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- if (id == 0) {
- pdata->reset_bit = AR934X_RESET_GE0_MAC |
- AR934X_RESET_GE0_MDIO;
- pdata->ddr_flush =ar934x_ddr_flush_ge0;
- pdata->set_speed = ar934x_set_speed_ge0;
- } else {
- pdata->reset_bit = AR934X_RESET_GE1_MAC |
- AR934X_RESET_GE1_MDIO;
- pdata->ddr_flush = ar934x_ddr_flush_ge1;
- pdata->set_speed = ar934x_set_speed_ge1;
-
- pdata->switch_data = &ath79_switch_data;
- }
-
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
-
- if (!pdata->fifo_cfg1)
- pdata->fifo_cfg1 = 0x0010ffff;
- if (!pdata->fifo_cfg2)
- pdata->fifo_cfg2 = 0x015500aa;
- if (!pdata->fifo_cfg3)
- pdata->fifo_cfg3 = 0x01f00140;
- break;
-
- default:
- BUG();
- }
-
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_GMII:
- case PHY_INTERFACE_MODE_RGMII:
- if (!pdata->has_gbit) {
- printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
- id);
- return;
- }
- /* fallthrough */
- default:
- break;
- }
-
- if (!is_valid_ether_addr(pdata->mac_addr)) {
- random_ether_addr(pdata->mac_addr);
- printk(KERN_DEBUG
- "ar71xx: using random MAC address for eth%d\n",
- ath79_eth_instance);
- }
-
- if (pdata->mii_bus_dev == NULL) {
- switch (ath79_soc) {
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- if (id == 0)
- pdata->mii_bus_dev = &ath79_mdio0_device.dev;
- else
- pdata->mii_bus_dev = &ath79_mdio1_device.dev;
- break;
-
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- pdata->mii_bus_dev = &ath79_mdio1_device.dev;
- break;
-
- default:
- pdata->mii_bus_dev = &ath79_mdio0_device.dev;
- break;
- }
- }
-
- /* Reset the device */
- ath79_device_reset_set(pdata->reset_bit);
- mdelay(100);
-
- ath79_device_reset_clear(pdata->reset_bit);
- mdelay(100);
-
- platform_device_register(pdev);
- ath79_eth_instance++;
-}
-
-void __init ath79_set_mac_base(unsigned char *mac)
-{
- memcpy(ath79_mac_base, mac, ETH_ALEN);
-}
-
-void __init ath79_parse_mac_addr(char *mac_str)
-{
- u8 tmp[ETH_ALEN];
- int t;
-
- t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
-
- if (t != ETH_ALEN)
- t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
- &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
-
- if (t == ETH_ALEN)
- ath79_set_mac_base(tmp);
- else
- printk(KERN_DEBUG "ar71xx: failed to parse mac address "
- "\"%s\"\n", mac_str);
-}
-
-static int __init ath79_ethaddr_setup(char *str)
-{
- ath79_parse_mac_addr(str);
- return 1;
-}
-__setup("ethaddr=", ath79_ethaddr_setup);
-
-static int __init ath79_kmac_setup(char *str)
-{
- ath79_parse_mac_addr(str);
- return 1;
-}
-__setup("kmac=", ath79_kmac_setup);
-
-void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
- int offset)
-{
- int t;
-
- if (!is_valid_ether_addr(src)) {
- memset(dst, '\0', ETH_ALEN);
- return;
- }
-
- t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
- t += offset;
-
- dst[0] = src[0];
- dst[1] = src[1];
- dst[2] = src[2];
- dst[3] = (t >> 16) & 0xff;
- dst[4] = (t >> 8) & 0xff;
- dst[5] = t & 0xff;
-}
-
-void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
-{
- int i;
-
- if (!is_valid_ether_addr(src)) {
- memset(dst, '\0', ETH_ALEN);
- return;
- }
-
- for (i = 0; i < ETH_ALEN; i++)
- dst[i] = src[i];
- dst[0] |= 0x02;
-}
+++ /dev/null
-/*
- * Atheros AR71xx SoC device definitions
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_ETH_H
-#define _ATH79_DEV_ETH_H
-
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-struct platform_device;
-
-extern unsigned char ath79_mac_base[] __initdata;
-void ath79_parse_mac_addr(char *mac_str);
-void ath79_init_mac(unsigned char *dst, const unsigned char *src,
- int offset);
-void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
-
-struct ath79_eth_pll_data {
- u32 pll_10;
- u32 pll_100;
- u32 pll_1000;
-};
-
-extern struct ath79_eth_pll_data ath79_eth0_pll_data;
-extern struct ath79_eth_pll_data ath79_eth1_pll_data;
-
-extern struct ag71xx_platform_data ath79_eth0_data;
-extern struct ag71xx_platform_data ath79_eth1_data;
-extern struct platform_device ath79_eth0_device;
-extern struct platform_device ath79_eth1_device;
-void ath79_register_eth(unsigned int id);
-
-extern struct ag71xx_switch_platform_data ath79_switch_data;
-
-extern struct platform_device ath79_mdio0_device;
-extern struct platform_device ath79_mdio1_device;
-void ath79_register_mdio(unsigned int id, u32 phy_mask);
-
-#endif /* _ATH79_DEV_ETH_H */
+++ /dev/null
-/*
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include "dev-spi.h"
-#include "dev-m25p80.h"
-
-static struct ath79_spi_controller_data ath79_spi0_cdata =
-{
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
-};
-
-static struct ath79_spi_controller_data ath79_spi1_cdata =
-{
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 1,
-};
-
-static struct spi_board_info ath79_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .controller_data = &ath79_spi0_cdata,
- },
- {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .controller_data = &ath79_spi1_cdata,
- }
-};
-
-static struct ath79_spi_platform_data ath79_spi_data;
-
-void __init ath79_register_m25p80(struct flash_platform_data *pdata)
-{
- ath79_spi_data.bus_num = 0;
- ath79_spi_data.num_chipselect = 1;
- ath79_spi_info[0].platform_data = pdata;
- ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
-}
-
-static struct flash_platform_data *multi_pdata;
-
-static struct mtd_info *concat_devs[2] = { NULL, NULL };
-static struct work_struct mtd_concat_work;
-
-static void mtd_concat_add_work(struct work_struct *work)
-{
- struct mtd_info *mtd;
-
- mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
-
- mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
-}
-
-static void mtd_concat_add(struct mtd_info *mtd)
-{
- static bool registered = false;
-
- if (registered)
- return;
-
- if (!strcmp(mtd->name, "spi0.0"))
- concat_devs[0] = mtd;
- else if (!strcmp(mtd->name, "spi0.1"))
- concat_devs[1] = mtd;
- else
- return;
-
- if (!concat_devs[0] || !concat_devs[1])
- return;
-
- registered = true;
- INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
- schedule_work(&mtd_concat_work);
-}
-
-static void mtd_concat_remove(struct mtd_info *mtd)
-{
-}
-
-static void add_mtd_concat_notifier(void)
-{
- static struct mtd_notifier not = {
- .add = mtd_concat_add,
- .remove = mtd_concat_remove,
- };
-
- register_mtd_user(¬);
-}
-
-
-void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
-{
- multi_pdata = pdata;
- add_mtd_concat_notifier();
- ath79_spi_data.bus_num = 0;
- ath79_spi_data.num_chipselect = 2;
- ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
-}
+++ /dev/null
-/*
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_M25P80_H
-#define _ATH79_DEV_M25P80_H
-
-#include <linux/spi/flash.h>
-
-void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
-void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
-
-#endif /* _ATH79_DEV_M25P80_H */
+++ /dev/null
-/*
- * ALFA Network AP96 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define ALFA_AP96_GPIO_PCIE_RESET 2
-#define ALFA_AP96_GPIO_SIM_DETECT 3
-#define ALFA_AP96_GPIO_MICROSD_CD 4
-#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
-
-#define ALFA_AP96_GPIO_BUTTON_RESET 11
-
-#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static int alfa_ap96_mmc_get_cd(struct device *dev)
-{
- return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
-}
-
-static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
- .get_cd = alfa_ap96_mmc_get_cd,
- .caps = MMC_CAP_NEEDS_POLL,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct ath79_spi_controller_data ap96_spi0_cdata = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 0,
-};
-
-static struct ath79_spi_controller_data ap96_spi1_cdata = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 1,
-};
-
-static struct ath79_spi_controller_data ap96_spi2_cdata = {
- .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
- .cs_line = 2,
-};
-
-static struct spi_board_info alfa_ap96_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .controller_data = &ap96_spi0_cdata
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &alfa_ap96_mmc_data,
- .controller_data = &ap96_spi1_cdata
- }, {
- .bus_num = 0,
- .chip_select = 2,
- .max_speed_hz = 6250000,
- .modalias = "rtc-pcf2123",
- .controller_data = &ap96_spi2_cdata
- },
-};
-
-static struct ath79_spi_platform_data alfa_ap96_spi_data = {
- .bus_num = 0,
- .num_chipselect = 3,
-};
-
-static void __init alfa_ap96_gpio_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
- gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
- gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
- gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
- gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
- gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
-}
-
-#define ALFA_AP96_WAN_PHYMASK BIT(4)
-#define ALFA_AP96_LAN_PHYMASK BIT(5)
-#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
-
-static void __init alfa_ap96_init(void)
-{
- alfa_ap96_gpio_setup();
-
- ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
- ath79_eth1_pll_data.pll_1000 = 0x110000;
-
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
- ath79_eth1_pll_data.pll_1000 = 0x110000;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
- ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
- ARRAY_SIZE(alfa_ap96_spi_info));
-
- ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(alfa_ap96_gpio_keys),
- alfa_ap96_gpio_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
- alfa_ap96_init);
+++ /dev/null
-/*
- * ALFA Network N2/N5 board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define ALFA_NX_GPIO_LED_2 17
-#define ALFA_NX_GPIO_LED_3 16
-#define ALFA_NX_GPIO_LED_5 12
-#define ALFA_NX_GPIO_LED_6 8
-#define ALFA_NX_GPIO_LED_7 6
-#define ALFA_NX_GPIO_LED_8 7
-
-#define ALFA_NX_GPIO_BTN_RESET 11
-
-#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
-
-#define ALFA_NX_MAC0_OFFSET 0
-#define ALFA_NX_MAC1_OFFSET 6
-#define ALFA_NX_CALDATA_OFFSET 0x1000
-
-static struct mtd_partition alfa_nx_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "rootfs",
- .offset = 0x050000,
- .size = 0x600000,
- }, {
- .name = "kernel",
- .offset = 0x650000,
- .size = 0x190000,
- }, {
- .name = "nvram",
- .offset = 0x7e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x7f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x780000,
- }
-};
-
-static struct flash_platform_data alfa_nx_flash_data = {
- .parts = alfa_nx_partitions,
- .nr_parts = ARRAY_SIZE(alfa_nx_partitions),
-};
-
-static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALFA_NX_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
- {
- .name = "alfa:green:led_2",
- .gpio = ALFA_NX_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "alfa:green:led_3",
- .gpio = ALFA_NX_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "alfa:red:led_5",
- .gpio = ALFA_NX_GPIO_LED_5,
- .active_low = 1,
- }, {
- .name = "alfa:amber:led_6",
- .gpio = ALFA_NX_GPIO_LED_6,
- .active_low = 1,
- }, {
- .name = "alfa:green:led_7",
- .gpio = ALFA_NX_GPIO_LED_7,
- .active_low = 1,
- }, {
- .name = "alfa:green:led_8",
- .gpio = ALFA_NX_GPIO_LED_8,
- .active_low = 1,
- }
-};
-
-static void __init alfa_nx_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(&alfa_nx_flash_data);
-
- ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
- alfa_nx_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(alfa_nx_gpio_keys),
- alfa_nx_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + ALFA_NX_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + ALFA_NX_MAC1_OFFSET, 0);
-
- /* WAN port */
- ath79_register_eth(0);
- /* LAN port */
- ath79_register_eth(1);
-
- ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
- alfa_nx_setup);
+++ /dev/null
-/*
- * Allnet ALL0258N support
- *
- * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-/* found via /sys/gpio/... try and error */
-#define ALL0258N_GPIO_BTN_RESET 1
-#define ALL0258N_GPIO_LED_RSSIHIGH 13
-#define ALL0258N_GPIO_LED_RSSIMEDIUM 15
-#define ALL0258N_GPIO_LED_RSSILOW 14
-
-/* defaults taken from others machs */
-#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
-
-/* showed up in the original firmware's bootlog */
-#define ALL0258N_SEC_PHYMASK BIT(3)
-
-/*
- * from U-Boot bootargs of original firmware:
- * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART)
- * we use a more OpenWrt-friendly layout now:
- * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART)
- */
-static struct mtd_partition all0258n_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x050000,
- .size = 0x0E0000,
- }, {
- .name = "rootfs",
- .offset = 0x130000,
- .size = 0x540000,
- }, {
- .name = "failsafe",
- .offset = 0x670000,
- .size = 0x180000,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x620000,
- }, {
- .name = "art",
- .offset = 0x7F0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data all0258n_flash_data = {
- .parts = all0258n_partitions,
- .nr_parts = ARRAY_SIZE(all0258n_partitions),
-};
-
-static struct gpio_led all0258n_leds_gpio[] __initdata = {
- {
- .name = "all0258n:green:rssihigh",
- .gpio = ALL0258N_GPIO_LED_RSSIHIGH,
- .active_low = 1,
- }, {
- .name = "all0258n:yellow:rssimedium",
- .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM,
- .active_low = 1,
- }, {
- .name = "all0258n:red:rssilow",
- .gpio = ALL0258N_GPIO_LED_RSSILOW,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALL0258N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init all0258n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000);
-
- ath79_register_m25p80(&all0258n_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
- all0258n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(all0258n_gpio_keys),
- all0258n_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
- all0258n_setup);
+++ /dev/null
-/*
- * Atheros AP113 board support
- *
- * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/flash.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "pci.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP113_GPIO_LED_USB 0
-#define AP113_GPIO_LED_STATUS 1
-#define AP113_GPIO_LED_ST 11
-
-#define AP113_GPIO_BTN_JUMPSTART 12
-
-#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition ap113_parts[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "rootfs",
- .offset = 0x010000,
- .size = 0x300000,
- },
- {
- .name = "uImage",
- .offset = 0x300000,
- .size = 0x3e0000,
- },
- {
- .name = "NVRAM",
- .offset = 0x3e0000,
- .size = 0x010000,
- },
- {
- .name = "ART",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- },
-};
-#define ap113_nr_parts ARRAY_SIZE(ap113_parts)
-
-static struct flash_platform_data ap113_flash_data = {
- .parts = ap113_parts,
- .nr_parts = ap113_nr_parts,
-};
-
-static struct gpio_led ap113_leds_gpio[] __initdata = {
- {
- .name = "ap113:green:usb",
- .gpio = AP113_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "ap113:green:status",
- .gpio = AP113_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "ap113:green:st",
- .gpio = AP113_GPIO_LED_ST,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
- {
- .desc = "jumpstart button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP113_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- },
-};
-
-static void __init ap113_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&ap113_flash_data);
-
- ath79_register_mdio(0, ~BIT(0));
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_eth(0);
-
- ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap113_gpio_keys),
- ap113_gpio_keys);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
- ap113_leds_gpio);
-
- ath79_register_pci();
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
- ap113_setup);
+++ /dev/null
-/*
- * Atheros AP83 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/vsc7385.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AP83_GPIO_LED_WLAN 6
-#define AP83_GPIO_LED_POWER 14
-#define AP83_GPIO_LED_JUMPSTART 15
-#define AP83_GPIO_BTN_JUMPSTART 12
-#define AP83_GPIO_BTN_RESET 21
-
-#define AP83_050_GPIO_VSC7385_CS 1
-#define AP83_050_GPIO_VSC7385_MISO 3
-#define AP83_050_GPIO_VSC7385_MOSI 16
-#define AP83_050_GPIO_VSC7385_SCK 17
-
-#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition ap83_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x060000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x1a0000,
- .size = 0x650000,
- }, {
- .name = "art",
- .offset = 0x7f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x060000,
- .size = 0x790000,
- }
-};
-
-static struct physmap_flash_data ap83_flash_data = {
- .width = 2,
- .parts = ap83_flash_partitions,
- .nr_parts = ARRAY_SIZE(ap83_flash_partitions),
-};
-
-static struct resource ap83_flash_resources[] = {
- [0] = {
- .start = AR71XX_SPI_BASE,
- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ap83_flash_device = {
- .name = "ar91xx-flash",
- .id = -1,
- .resource = ap83_flash_resources,
- .num_resources = ARRAY_SIZE(ap83_flash_resources),
- .dev = {
- .platform_data = &ap83_flash_data,
- }
-};
-
-static struct gpio_led ap83_leds_gpio[] __initdata = {
- {
- .name = "ap83:green:jumpstart",
- .gpio = AP83_GPIO_LED_JUMPSTART,
- .active_low = 0,
- }, {
- .name = "ap83:green:power",
- .gpio = AP83_GPIO_LED_POWER,
- .active_low = 0,
- }, {
- .name = "ap83:green:wlan",
- .gpio = AP83_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
- {
- .desc = "soft_reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP83_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "jumpstart",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP83_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- }
-};
-
-static struct resource ap83_040_spi_resources[] = {
- [0] = {
- .start = AR71XX_SPI_BASE,
- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device ap83_040_spi_device = {
- .name = "ap83-spi",
- .id = 0,
- .resource = ap83_040_spi_resources,
- .num_resources = ARRAY_SIZE(ap83_040_spi_resources),
-};
-
-static struct spi_gpio_platform_data ap83_050_spi_data = {
- .miso = AP83_050_GPIO_VSC7385_MISO,
- .mosi = AP83_050_GPIO_VSC7385_MOSI,
- .sck = AP83_050_GPIO_VSC7385_SCK,
- .num_chipselect = 1,
-};
-
-static struct platform_device ap83_050_spi_device = {
- .name = "spi_gpio",
- .id = 0,
- .dev = {
- .platform_data = &ap83_050_spi_data,
- }
-};
-
-static void ap83_vsc7385_reset(void)
-{
- ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
- udelay(10);
- ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
- mdelay(50);
-}
-
-static struct vsc7385_platform_data ap83_vsc7385_data = {
- .reset = ap83_vsc7385_reset,
- .ucode_name = "vsc7385_ucode_ap83.bin",
- .mac_cfg = {
- .tx_ipg = 6,
- .bit2 = 0,
- .clk_sel = 3,
- },
-};
-
-static struct spi_board_info ap83_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "spi-vsc7385",
- .platform_data = &ap83_vsc7385_data,
- .controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
- }
-};
-
-static void __init ap83_generic_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, 0xfffffffe);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = 0x1;
-
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_eth1_pll_data.pll_1000 = 0x1f000000;
-
- ath79_register_eth(1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
- ap83_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap83_gpio_keys),
- ap83_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(eeprom, NULL);
-
- platform_device_register(&ap83_flash_device);
-
- spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
-}
-
-static void ap83_040_flash_lock(struct platform_device *pdev)
-{
- ath79_flash_acquire();
-}
-
-static void ap83_040_flash_unlock(struct platform_device *pdev)
-{
- ath79_flash_release();
-}
-
-static void __init ap83_040_setup(void)
-{
- ap83_flash_data.lock = ap83_040_flash_lock;
- ap83_flash_data.unlock = ap83_040_flash_unlock;
- ap83_generic_setup();
- platform_device_register(&ap83_040_spi_device);
-}
-
-static void __init ap83_050_setup(void)
-{
- ap83_generic_setup();
- platform_device_register(&ap83_050_spi_device);
-}
-
-static void __init ap83_setup(void)
-{
- u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
- unsigned int board_version;
-
- board_version = (unsigned int)(board_id[0] - '0');
- board_version += ((unsigned int)(board_id[1] - '0')) * 10;
-
- switch (board_version) {
- case 40:
- ap83_040_setup();
- break;
- case 50:
- ap83_050_setup();
- break;
- default:
- printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
- board_version);
- }
-}
-
-MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
+++ /dev/null
-/*
- * Atheros AP96 board support
- *
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Atheros Communications
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP96_GPIO_LED_12_GREEN 0
-#define AP96_GPIO_LED_3_GREEN 1
-#define AP96_GPIO_LED_2_GREEN 2
-#define AP96_GPIO_LED_WPS_GREEN 4
-#define AP96_GPIO_LED_5_GREEN 5
-#define AP96_GPIO_LED_4_ORANGE 6
-
-/* Reset button - next to the power connector */
-#define AP96_GPIO_BTN_RESET 3
-/* WPS button - next to a led on right */
-#define AP96_GPIO_BTN_WPS 8
-
-#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL)
-
-#define AP96_WMAC0_MAC_OFFSET 0x120c
-#define AP96_WMAC1_MAC_OFFSET 0x520c
-#define AP96_CALDATA0_OFFSET 0x1000
-#define AP96_CALDATA1_OFFSET 0x5000
-
-static struct mtd_partition ap96_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "env",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "rootfs",
- .offset = 0x040000,
- .size = 0x600000,
- }, {
- .name = "uImage",
- .offset = 0x640000,
- .size = 0x1b0000,
- }, {
- .name = "caldata",
- .offset = 0x7f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data ap96_flash_data = {
- .parts = ap96_partitions,
- .nr_parts = ARRAY_SIZE(ap96_partitions),
-};
-
-/*
- * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
- * below (from left to right on the board). Led 1 seems to be on whenever the
- * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
- * others are green.
- *
- * In addition, there is one led next to a button on the right side for WPS.
- */
-static struct gpio_led ap96_leds_gpio[] __initdata = {
- {
- .name = "ap96:green:led2",
- .gpio = AP96_GPIO_LED_2_GREEN,
- .active_low = 1,
- }, {
- .name = "ap96:green:led3",
- .gpio = AP96_GPIO_LED_3_GREEN,
- .active_low = 1,
- }, {
- .name = "ap96:orange:led4",
- .gpio = AP96_GPIO_LED_4_ORANGE,
- .active_low = 1,
- }, {
- .name = "ap96:green:led5",
- .gpio = AP96_GPIO_LED_5_GREEN,
- .active_low = 1,
- }, {
- .name = "ap96:green:led12",
- .gpio = AP96_GPIO_LED_12_GREEN,
- .active_low = 1,
- }, { /* next to a button on right */
- .name = "ap96:green:wps",
- .gpio = AP96_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP96_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP96_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-#define AP96_WAN_PHYMASK 0x10
-#define AP96_LAN_PHYMASK 0x0f
-
-static void __init ap96_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
-
- ath79_eth1_pll_data.pll_1000 = 0x1f000000;
-
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_m25p80(&ap96_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
- ap96_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap96_gpio_keys),
- ap96_gpio_keys);
-
- ap94_pci_init(art + AP96_CALDATA0_OFFSET,
- art + AP96_WMAC0_MAC_OFFSET,
- art + AP96_CALDATA1_OFFSET,
- art + AP96_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
+++ /dev/null
-/*
- * AzureWave AW-NR580 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define AW_NR580_GPIO_LED_READY_RED 0
-#define AW_NR580_GPIO_LED_WLAN 1
-#define AW_NR580_GPIO_LED_READY_GREEN 2
-#define AW_NR580_GPIO_LED_WPS_GREEN 4
-#define AW_NR580_GPIO_LED_WPS_AMBER 5
-
-#define AW_NR580_GPIO_BTN_WPS 3
-#define AW_NR580_GPIO_BTN_RESET 11
-
-#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL)
-
-static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
- {
- .name = "aw-nr580:red:ready",
- .gpio = AW_NR580_GPIO_LED_READY_RED,
- .active_low = 0,
- }, {
- .name = "aw-nr580:green:ready",
- .gpio = AW_NR580_GPIO_LED_READY_GREEN,
- .active_low = 0,
- }, {
- .name = "aw-nr580:green:wps",
- .gpio = AW_NR580_GPIO_LED_WPS_GREEN,
- .active_low = 0,
- }, {
- .name = "aw-nr580:amber:wps",
- .gpio = AW_NR580_GPIO_LED_WPS_AMBER,
- .active_low = 0,
- }, {
- .name = "aw-nr580:green:wlan",
- .gpio = AW_NR580_GPIO_LED_WLAN,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AW_NR580_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AW_NR580_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static const char *aw_nr580_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data aw_nr580_flash_data = {
- .part_probes = aw_nr580_part_probes,
-};
-
-static void __init aw_nr580_setup(void)
-{
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
-
- ath79_register_pci();
-
- ath79_register_m25p80(&aw_nr580_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
- aw_nr580_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(aw_nr580_gpio_keys),
- aw_nr580_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
- aw_nr580_setup);
+++ /dev/null
-/*
- * D-Link DIR-600 rev. A1 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_600_A1_GPIO_LED_WPS 0
-#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
-#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
-#define DIR_600_A1_GPIO_LED_LAN1 13
-#define DIR_600_A1_GPIO_LED_LAN2 14
-#define DIR_600_A1_GPIO_LED_LAN3 15
-#define DIR_600_A1_GPIO_LED_LAN4 16
-#define DIR_600_A1_GPIO_LED_WAN_AMBER 7
-#define DIR_600_A1_GPIO_LED_WAN_GREEN 17
-
-#define DIR_600_A1_GPIO_BTN_RESET 8
-#define DIR_600_A1_GPIO_BTN_WPS 12
-
-#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
-
-#define DIR_600_A1_NVRAM_ADDR 0x1f030000
-#define DIR_600_A1_NVRAM_SIZE 0x10000
-
-static struct mtd_partition dir_600_a1_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "nvram",
- .offset = 0x030000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x040000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2c0000,
- }, {
- .name = "mac",
- .offset = 0x3e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x3a0000,
- }
-};
-
-static struct flash_platform_data dir_600_a1_flash_data = {
- .parts = dir_600_a1_partitions,
- .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
-};
-
-static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
- }, {
- .name = "d-link:amber:power",
- .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan1",
- .gpio = DIR_600_A1_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan2",
- .gpio = DIR_600_A1_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan3",
- .gpio = DIR_600_A1_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan4",
- .gpio = DIR_600_A1_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_600_A1_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_600_A1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_600_A1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init dir_600_a1_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac_buff[6];
- u8 *mac = NULL;
-
- if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
- "lan_mac=", mac_buff) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
- mac = mac_buff;
- }
-
- ath79_register_m25p80(&dir_600_a1_flash_data);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
- dir_600_a1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_600_a1_gpio_keys),
- dir_600_a1_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
- dir_600_a1_setup);
-
-static void __init dir_615_e4_setup(void)
-{
- dir_600_a1_setup();
- ap9x_pci_setup_wmac_led_pin(0, 1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
- dir_615_e4_setup);
+++ /dev/null
-/*
- * D-Link DIR-615 rev C1 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
-#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
-#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
-#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
-#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
-#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
-#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
-
-/* buttons may need refinement */
-
-#define DIR_615C1_GPIO_BTN_WPS 12
-#define DIR_615C1_GPIO_BTN_RESET 21
-
-#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
-
-#define DIR_615C1_CONFIG_ADDR 0x1f020000
-#define DIR_615C1_CONFIG_SIZE 0x10000
-
-static struct mtd_partition dir_615c1_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "config",
- .offset = 0x020000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x030000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x110000,
- .size = 0x2e0000,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x030000,
- .size = 0x3c0000,
- }
-};
-
-static struct flash_platform_data dir_615c1_flash_data = {
- .parts = dir_615c1_partitions,
- .nr_parts = ARRAY_SIZE(dir_615c1_partitions),
-};
-
-static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
- {
- .name = "d-link:orange:status",
- .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
- .active_low = 1,
- }, {
- .name = "d-link:green:wancpu",
- .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
- .active_low = 1,
- }, {
- .name = "d-link:green:wlan",
- .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
- .active_low = 1,
- }, {
- .name = "d-link:green:status",
- .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
- .active_low = 1,
- }, {
- .name = "d-link:orange:wan",
- .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
- .active_low = 1,
- }
-
-};
-
-static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615C1_GPIO_BTN_RESET,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615C1_GPIO_BTN_WPS,
- }
-};
-
-#define DIR_615C1_LAN_PHYMASK BIT(0)
-#define DIR_615C1_WAN_PHYMASK BIT(4)
-#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \
- DIR_615C1_WAN_PHYMASK))
-
-static void __init dir_615c1_setup(void)
-{
- const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
- u8 *wlan_mac = NULL;
-
- if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
- "lan_mac=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- wlan_mac = mac;
- }
-
- ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&dir_615c1_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
- dir_615c1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_615c1_gpio_keys),
- dir_615c1_gpio_keys);
-
- ath79_register_wmac(eeprom, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
- dir_615c1_setup);
+++ /dev/null
-/*
- * D-Link DIR-825 rev. B1 board support
- *
- * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
- *
- * based on mach-wndr3700.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define DIR825B1_GPIO_LED_BLUE_USB 0
-#define DIR825B1_GPIO_LED_ORANGE_POWER 1
-#define DIR825B1_GPIO_LED_BLUE_POWER 2
-#define DIR825B1_GPIO_LED_BLUE_WPS 4
-#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
-#define DIR825B1_GPIO_LED_BLUE_PLANET 11
-
-#define DIR825B1_GPIO_BTN_RESET 3
-#define DIR825B1_GPIO_BTN_WPS 8
-
-#define DIR825B1_GPIO_RTL8366_SDA 5
-#define DIR825B1_GPIO_RTL8366_SCK 7
-
-#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL)
-
-#define DIR825B1_CAL_LOCATION_0 0x1f661000
-#define DIR825B1_CAL_LOCATION_1 0x1f665000
-
-#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0
-#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4
-
-static struct mtd_partition dir825b1_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "config",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x610000,
- }, {
- .name = "caldata",
- .offset = 0x660000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "unknown",
- .offset = 0x670000,
- .size = 0x190000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data dir825b1_flash_data = {
- .parts = dir825b1_partitions,
- .nr_parts = ARRAY_SIZE(dir825b1_partitions),
-};
-
-static struct gpio_led dir825b1_leds_gpio[] __initdata = {
- {
- .name = "d-link:blue:usb",
- .gpio = DIR825B1_GPIO_LED_BLUE_USB,
- .active_low = 1,
- }, {
- .name = "d-link:orange:power",
- .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
- .active_low = 1,
- }, {
- .name = "d-link:blue:power",
- .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR825B1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- }, {
- .name = "d-link:orange:planet",
- .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
- .active_low = 1,
- }, {
- .name = "d-link:blue:planet",
- .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825B1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825B1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
- { .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
- .gpio_sda = DIR825B1_GPIO_RTL8366_SDA,
- .gpio_sck = DIR825B1_GPIO_RTL8366_SCK,
- .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
- .initvals = dir825b1_rtl8366s_initvals,
-};
-
-static struct platform_device dir825b1_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &dir825b1_rtl8366s_data,
- }
-};
-
-static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
-{
- int ret;
- u8 *src = (u8 *)KSEG1ADDR(src_addr);
-
- ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &dest[0], &dest[1], &dest[2],
- &dest[3], &dest[4], &dest[5]);
-
- if (ret != ETH_ALEN)
- memset(dest, 0, ETH_ALEN);
-}
-
-static void __init dir825b1_setup(void)
-{
- u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
-
- dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
- dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
- ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
- ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
- ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&dir825b1_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
- dir825b1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir825b1_gpio_keys),
- dir825b1_gpio_keys);
-
- ath79_register_usb();
-
- platform_device_register(&dir825b1_rtl8366s_device);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
- (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
- dir825b1_setup);
+++ /dev/null
-/*
- * Senao EAP7660D board support
- *
- * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/ath5k_platform.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */
-#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL)
-
-#define EAP7660D_GPIO_DS4 7
-#define EAP7660D_GPIO_DS5 2
-#define EAP7660D_GPIO_DS7 0
-#define EAP7660D_GPIO_DS8 4
-#define EAP7660D_GPIO_SW1 3
-#define EAP7660D_GPIO_SW3 8
-#define EAP7660D_PHYMASK BIT(20)
-#define EAP7660D_BOARDCONFIG 0x1F7F0000
-#define EAP7660D_GBIC_MAC_OFFSET 0x1000
-#define EAP7660D_WMAC0_MAC_OFFSET 0x1010
-#define EAP7660D_WMAC1_MAC_OFFSET 0x1016
-#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000
-#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000
-
-#ifdef CONFIG_PCI
-static struct ath5k_platform_data eap7660d_wmac0_data;
-static struct ath5k_platform_data eap7660d_wmac1_data;
-static char eap7660d_wmac0_mac[6];
-static char eap7660d_wmac1_mac[6];
-static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
-static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
-
-static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 17:
- dev->dev.platform_data = &eap7660d_wmac0_data;
- break;
-
- case 18:
- dev->dev.platform_data = &eap7660d_wmac1_data;
- break;
- }
-
- return 0;
-}
-
-void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1)
-{
- if (cal_data0 && *cal_data0 == 0xa55a) {
- memcpy(eap7660d_wmac0_eeprom, cal_data0,
- ATH5K_PLAT_EEP_MAX_WORDS);
- eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
- }
-
- if (cal_data1 && *cal_data1 == 0xa55a) {
- memcpy(eap7660d_wmac1_eeprom, cal_data1,
- ATH5K_PLAT_EEP_MAX_WORDS);
- eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
- }
-
- if (mac_addr0) {
- memcpy(eap7660d_wmac0_mac, mac_addr0,
- sizeof(eap7660d_wmac0_mac));
- eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
- }
-
- if (mac_addr1) {
- memcpy(eap7660d_wmac1_mac, mac_addr1,
- sizeof(eap7660d_wmac1_mac));
- eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
- }
-
- ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1)
-{
-}
-#endif /* CONFIG_PCI */
-
-static struct gpio_led eap7660d_leds_gpio[] __initdata = {
- {
- .name = "eap7660d:green:ds8",
- .gpio = EAP7660D_GPIO_DS8,
- .active_low = 0,
- },
- {
- .name = "eap7660d:green:ds5",
- .gpio = EAP7660D_GPIO_DS5,
- .active_low = 0,
- },
- {
- .name = "eap7660d:green:ds7",
- .gpio = EAP7660D_GPIO_DS7,
- .active_low = 0,
- },
- {
- .name = "eap7660d:green:ds4",
- .gpio = EAP7660D_GPIO_DS4,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EAP7660D_GPIO_SW1,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EAP7660D_GPIO_SW3,
- .active_low = 1,
- }
-};
-
-static const char *eap7660d_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data eap7660d_flash_data = {
- .part_probes = eap7660d_part_probes,
-};
-
-static void __init eap7660d_setup(void)
-{
- u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
-
- ath79_register_mdio(0, ~EAP7660D_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
- ath79_register_eth(0);
- ath79_register_m25p80(&eap7660d_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
- eap7660d_leds_gpio);
- ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(eap7660d_gpio_keys),
- eap7660d_gpio_keys);
- eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
- boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
- boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
- boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
-};
-
-MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
- eap7660d_setup);
+++ /dev/null
-/*
- * ALFA NETWORKS Hornet-UB board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define HORNET_UB_GPIO_LED_WLAN 0
-#define HORNET_UB_GPIO_LED_USB 1
-#define HORNET_UB_GPIO_LED_LAN 13
-#define HORNET_UB_GPIO_LED_WAN 17
-#define HORNET_UB_GPIO_LED_WPS 27
-
-#define HORNET_UB_GPIO_BTN_RESET 11
-#define HORNET_UB_GPIO_BTN_WPS 12
-
-#define HORNET_UB_GPIO_USB_POWER 26
-
-#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */
-#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL)
-
-#define HORNET_UB_MAC0_OFFSET 0x0000
-#define HORNET_UB_MAC1_OFFSET 0x0006
-#define HORNET_UB_CALDATA_OFFSET 0x1000
-
-static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
- {
- .name = "alfa:blue:lan",
- .gpio = HORNET_UB_GPIO_LED_LAN,
- .active_low = 0,
- },
- {
- .name = "alfa:blue:usb",
- .gpio = HORNET_UB_GPIO_LED_USB,
- .active_low = 0,
- },
- {
- .name = "alfa:blue:wan",
- .gpio = HORNET_UB_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "alfa:blue:wlan",
- .gpio = HORNET_UB_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "alfa:blue:wps",
- .gpio = HORNET_UB_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HORNET_UB_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HORNET_UB_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init hornet_ub_gpio_setup(void)
-{
- u32 t;
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
- gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power");
- gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1);
-}
-
-static void __init hornet_ub_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- hornet_ub_gpio_setup();
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
- hornet_ub_leds_gpio);
- ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(hornet_ub_gpio_keys),
- hornet_ub_gpio_keys);
-
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + HORNET_UB_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + HORNET_UB_MAC1_OFFSET, 0);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB",
- hornet_ub_setup);
+++ /dev/null
-/*
- * jjPlus JA76PF board support
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */
-#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL)
-
-#define JA76PF_GPIO_I2C_SCL 0
-#define JA76PF_GPIO_I2C_SDA 1
-#define JA76PF_GPIO_LED_1 5
-#define JA76PF_GPIO_LED_2 4
-#define JA76PF_GPIO_LED_3 3
-#define JA76PF_GPIO_BTN_RESET 11
-
-static struct gpio_led ja76pf_leds_gpio[] __initdata = {
- {
- .name = "ja76pf:green:led1",
- .gpio = JA76PF_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "ja76pf:green:led2",
- .gpio = JA76PF_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "ja76pf:green:led3",
- .gpio = JA76PF_GPIO_LED_3,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
- .gpio = JA76PF_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
- .sda_pin = JA76PF_GPIO_I2C_SDA,
- .scl_pin = JA76PF_GPIO_I2C_SCL,
-};
-
-static struct platform_device ja76pf_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ja76pf_i2c_gpio_data,
- }
-};
-
-static const char *ja76pf_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data ja76pf_flash_data = {
- .part_probes = ja76pf_part_probes,
-};
-
-#define JA76PF_WAN_PHYMASK (1 << 4)
-#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
-#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
-
-static void __init ja76pf_init(void)
-{
- ath79_register_m25p80(&ja76pf_flash_data);
-
- ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- platform_device_register(&ja76pf_i2c_gpio_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
- ja76pf_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ja76pf_gpio_keys),
- ja76pf_gpio_keys);
-
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
+++ /dev/null
-/*
- * jjPlus JWAP003 board support
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
-#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
-
-#define JWAP003_GPIO_WPS 11
-#define JWAP003_GPIO_I2C_SCL 0
-#define JWAP003_GPIO_I2C_SDA 1
-
-static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
- .gpio = JWAP003_GPIO_WPS,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
- .sda_pin = JWAP003_GPIO_I2C_SDA,
- .scl_pin = JWAP003_GPIO_I2C_SCL,
-};
-
-static struct platform_device jwap003_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &jwap003_i2c_gpio_data,
- }
-};
-
-static const char *jwap003_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data jwap003_flash_data = {
- .part_probes = jwap003_part_probes,
-};
-
-#define JWAP003_WAN_PHYMASK BIT(0)
-#define JWAP003_LAN_PHYMASK BIT(4)
-
-static void __init jwap003_init(void)
-{
- ath79_register_m25p80(&jwap003_flash_data);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
- ath79_eth1_data.speed = SPEED_100;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- platform_device_register(&jwap003_i2c_gpio_device);
-
- ath79_register_usb();
-
- ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(jwap003_gpio_keys),
- jwap003_gpio_keys);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
+++ /dev/null
-/*
- * Planex MZK-W04NU board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MZK_W04NU_GPIO_LED_USB 0
-#define MZK_W04NU_GPIO_LED_STATUS 1
-#define MZK_W04NU_GPIO_LED_WPS 3
-#define MZK_W04NU_GPIO_LED_WLAN 6
-#define MZK_W04NU_GPIO_LED_AP 15
-#define MZK_W04NU_GPIO_LED_ROUTER 16
-
-#define MZK_W04NU_GPIO_BTN_APROUTER 5
-#define MZK_W04NU_GPIO_BTN_WPS 12
-#define MZK_W04NU_GPIO_BTN_RESET 21
-
-#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
- {
- .name = "planex:green:status",
- .gpio = MZK_W04NU_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "planex:blue:wps",
- .gpio = MZK_W04NU_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "planex:green:wlan",
- .gpio = MZK_W04NU_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "planex:green:usb",
- .gpio = MZK_W04NU_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "planex:green:ap",
- .gpio = MZK_W04NU_GPIO_LED_AP,
- .active_low = 1,
- }, {
- .name = "planex:green:router",
- .gpio = MZK_W04NU_GPIO_LED_ROUTER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W04NU_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W04NU_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "aprouter",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W04NU_GPIO_BTN_APROUTER,
- .active_low = 0,
- }
-};
-
-#define MZK_W04NU_WAN_PHYMASK BIT(4)
-#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK)
-
-static void __init mzk_w04nu_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
- mzk_w04nu_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mzk_w04nu_gpio_keys),
- mzk_w04nu_gpio_keys);
- ath79_register_usb();
-
- ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
- mzk_w04nu_setup);
+++ /dev/null
-/*
- * Planex MZK-W300NH board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MZK_W300NH_GPIO_LED_STATUS 1
-#define MZK_W300NH_GPIO_LED_WPS 3
-#define MZK_W300NH_GPIO_LED_WLAN 6
-#define MZK_W300NH_GPIO_LED_AP_GREEN 15
-#define MZK_W300NH_GPIO_LED_AP_AMBER 16
-
-#define MZK_W300NH_GPIO_BTN_APROUTER 5
-#define MZK_W300NH_GPIO_BTN_WPS 12
-#define MZK_W300NH_GPIO_BTN_RESET 21
-
-#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
- {
- .name = "planex:green:status",
- .gpio = MZK_W300NH_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "planex:blue:wps",
- .gpio = MZK_W300NH_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "planex:green:wlan",
- .gpio = MZK_W300NH_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "planex:green:aprouter",
- .gpio = MZK_W300NH_GPIO_LED_AP_GREEN,
- }, {
- .name = "planex:amber:aprouter",
- .gpio = MZK_W300NH_GPIO_LED_AP_AMBER,
- }
-};
-
-static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W300NH_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W300NH_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "aprouter",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
- .active_low = 0,
- }
-};
-
-#define MZK_W300NH_WAN_PHYMASK BIT(4)
-#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
-
-static void __init mzk_w300nh_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
- mzk_w300nh_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mzk_w300nh_gpio_keys),
- mzk_w300nh_gpio_keys);
- ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
- mzk_w300nh_setup);
+++ /dev/null
-/*
- * Zyxel NBG 460N/550N/550NH board support
- *
- * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
- *
- * based on mach-tl-wr1043nd.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* LEDs */
-#define NBG460N_GPIO_LED_WPS 3
-#define NBG460N_GPIO_LED_WAN 6
-#define NBG460N_GPIO_LED_POWER 14
-#define NBG460N_GPIO_LED_WLAN 15
-
-/* Buttons */
-#define NBG460N_GPIO_BTN_WPS 12
-#define NBG460N_GPIO_BTN_RESET 21
-
-#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL)
-
-/* RTC chip PCF8563 I2C interface */
-#define NBG460N_GPIO_PCF8563_SDA 8
-#define NBG460N_GPIO_PCF8563_SCK 7
-
-/* Switch configuration I2C interface */
-#define NBG460N_GPIO_RTL8366_SDA 16
-#define NBG460N_GPIO_RTL8366_SCK 18
-
-static struct mtd_partition nbg460n_partitions[] = {
- {
- .name = "Bootbase",
- .offset = 0,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "U-Boot Config",
- .offset = 0x010000,
- .size = 0x030000,
- }, {
- .name = "U-Boot",
- .offset = 0x040000,
- .size = 0x030000,
- }, {
- .name = "linux",
- .offset = 0x070000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x150000,
- .size = 0x2a0000,
- }, {
- .name = "CalibData",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x070000,
- .size = 0x380000,
- }
-};
-
-static struct flash_platform_data nbg460n_flash_data = {
- .parts = nbg460n_partitions,
- .nr_parts = ARRAY_SIZE(nbg460n_partitions),
-};
-
-static struct gpio_led nbg460n_leds_gpio[] __initdata = {
- {
- .name = "nbg460n:green:power",
- .gpio = NBG460N_GPIO_LED_POWER,
- .active_low = 0,
- .default_trigger = "default-on",
- }, {
- .name = "nbg460n:green:wps",
- .gpio = NBG460N_GPIO_LED_WPS,
- .active_low = 0,
- }, {
- .name = "nbg460n:green:wlan",
- .gpio = NBG460N_GPIO_LED_WLAN,
- .active_low = 0,
- }, {
- /* Not really for controlling the LED,
- when set low the LED blinks uncontrollable */
- .name = "nbg460n:green:wan",
- .gpio = NBG460N_GPIO_LED_WAN,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG460N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG460N_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
- .sda_pin = NBG460N_GPIO_PCF8563_SDA,
- .scl_pin = NBG460N_GPIO_PCF8563_SCK,
- .udelay = 10,
-};
-
-static struct platform_device nbg460n_i2c_device = {
- .name = "i2c-gpio",
- .id = -1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &nbg460n_i2c_device_platdata,
- },
-};
-
-static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static void __devinit nbg460n_i2c_init(void)
-{
- /* The gpio interface */
- platform_device_register(&nbg460n_i2c_device);
- /* I2C devices */
- i2c_register_board_info(0, nbg460n_i2c_devs,
- ARRAY_SIZE(nbg460n_i2c_devs));
-}
-
-
-static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
- .gpio_sda = NBG460N_GPIO_RTL8366_SDA,
- .gpio_sck = NBG460N_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device nbg460n_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &nbg460n_rtl8366s_data,
- }
-};
-
-static void __init nbg460n_setup(void)
-{
- /* end of bootloader sector contains mac address */
- u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
- /* last sector contains wlan calib data */
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* LAN Port */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- /* WAN Port */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- /* register the switch phy */
- platform_device_register(&nbg460n_rtl8366s_device);
-
- /* register flash */
- ath79_register_m25p80(&nbg460n_flash_data);
-
- ath79_register_wmac(eeprom, mac);
-
- /* register RTC chip */
- nbg460n_i2c_init();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
- nbg460n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(nbg460n_gpio_keys),
- nbg460n_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
- nbg460n_setup);
+++ /dev/null
-/*
- * OpenMesh OM2P support
- *
- * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define OM2P_GPIO_LED_POWER 0
-#define OM2P_GPIO_LED_GREEN 13
-#define OM2P_GPIO_LED_RED 14
-#define OM2P_GPIO_LED_YELLOW 15
-#define OM2P_GPIO_LED_LAN 16
-#define OM2P_GPIO_LED_WAN 17
-#define OM2P_GPIO_BTN_RESET 11
-
-#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL)
-
-#define OM2P_WAN_PHYMASK BIT(4)
-
-static struct flash_platform_data om2p_flash_data = {
- .type = "s25sl12800",
- .name = "ar7240-nor0",
-};
-
-static struct gpio_led om2p_leds_gpio[] __initdata = {
- {
- .name = "om2p:blue:power",
- .gpio = OM2P_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "om2p:red:wifi",
- .gpio = OM2P_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "om2p:yellow:wifi",
- .gpio = OM2P_GPIO_LED_YELLOW,
- .active_low = 1,
- }, {
- .name = "om2p:green:wifi",
- .gpio = OM2P_GPIO_LED_GREEN,
- .active_low = 1,
- }, {
- .name = "om2p:blue:lan",
- .gpio = OM2P_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "om2p:blue:wan",
- .gpio = OM2P_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OM2P_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init om2p_setup(void)
-{
- u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
- u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
- u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(&om2p_flash_data);
-
- ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap91_pci_init(ee, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
- om2p_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om2p_gpio_keys),
- om2p_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
+++ /dev/null
-/*
- * Atheros PB42 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL)
-
-#define PB42_GPIO_BTN_SW4 8
-#define PB42_GPIO_BTN_SW5 3
-
-static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
- {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB42_GPIO_BTN_SW4,
- .active_low = 1,
- }, {
- .desc = "sw5",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB42_GPIO_BTN_SW5,
- .active_low = 1,
- }
-};
-
-static const char *pb42_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data pb42_flash_data = {
- .part_probes = pb42_part_probes,
-};
-
-#define PB42_WAN_PHYMASK BIT(20)
-#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
-#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
-
-static void __init pb42_init(void)
-{
- ath79_register_m25p80(&pb42_flash_data);
-
- ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.speed = SPEED_100;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pb42_gpio_keys),
- pb42_gpio_keys);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
+++ /dev/null
-/*
- * Atheros PB92 board support
- *
- * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-static struct mtd_partition pb92_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x010000,
- }, {
- .name = "rootfs",
- .offset = 0x050000,
- .size = 0x2b0000,
- }, {
- .name = "uImage",
- .offset = 0x300000,
- .size = 0x0e0000,
- }, {
- .name = "ART",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data pb92_flash_data = {
- .parts = pb92_partitions,
- .nr_parts = ARRAY_SIZE(pb92_partitions),
-};
-
-#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL)
-
-#define PB92_GPIO_BTN_SW4 8
-#define PB92_GPIO_BTN_SW5 3
-
-static struct gpio_keys_button pb92_gpio_keys[] __initdata = {
- {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB92_GPIO_BTN_SW4,
- .active_low = 1,
- }, {
- .desc = "sw5",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB92_GPIO_BTN_SW5,
- .active_low = 1,
- }
-};
-
-static void __init pb92_init(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&pb92_flash_data);
-
- ath79_register_mdio(0, ~BIT(0));
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_eth(0);
-
- ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pb92_gpio_keys),
- pb92_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
+++ /dev/null
-/*
- * MikroTik RouterBOARD 4xx series support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mdio-gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-#include <asm/mach-ath79/rb4xx_cpld.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define RB4XX_GPIO_USER_LED 4
-#define RB4XX_GPIO_RESET_SWITCH 7
-
-#define RB4XX_GPIO_CPLD_BASE 32
-#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
-#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
-#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
-#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
-#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
-
-#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rb4xx_leds_gpio[] __initdata = {
- {
- .name = "rb4xx:yellow:user",
- .gpio = RB4XX_GPIO_USER_LED,
- .active_low = 0,
- }, {
- .name = "rb4xx:green:led1",
- .gpio = RB4XX_GPIO_CPLD_LED1,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led2",
- .gpio = RB4XX_GPIO_CPLD_LED2,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led3",
- .gpio = RB4XX_GPIO_CPLD_LED3,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led4",
- .gpio = RB4XX_GPIO_CPLD_LED4,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led5",
- .gpio = RB4XX_GPIO_CPLD_LED5,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
- {
- .desc = "reset_switch",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB4XX_GPIO_RESET_SWITCH,
- .active_low = 1,
- }
-};
-
-static struct platform_device rb4xx_nand_device = {
- .name = "rb4xx-nand",
- .id = -1,
-};
-
-static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
- {
- .slot = 17,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }, {
- .slot = 18,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }, {
- .slot = 18,
- .pin = 2,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 19,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 19,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }
-};
-
-static struct mtd_partition rb4xx_partitions[] = {
- {
- .name = "routerboot",
- .offset = 0,
- .size = 0x0b000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "hard_config",
- .offset = 0x0b000,
- .size = 0x01000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = 0x0d000,
- .size = 0x02000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .offset = 0x0f000,
- .size = 0x01000,
- }
-};
-
-static struct flash_platform_data rb4xx_flash_data = {
- .type = "pm25lv512",
- .parts = rb4xx_partitions,
- .nr_parts = ARRAY_SIZE(rb4xx_partitions),
-};
-
-static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
- .gpio_base = RB4XX_GPIO_CPLD_BASE,
-};
-
-static struct mmc_spi_platform_data rb4xx_mmc_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct spi_board_info rb4xx_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rb4xx_flash_data,
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "spi-rb4xx-cpld",
- .platform_data = &rb4xx_cpld_data,
- }
-};
-
-static struct spi_board_info rb4xx_microsd_info[] = {
- {
- .bus_num = 0,
- .chip_select = 2,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &rb4xx_mmc_data,
- }
-};
-
-
-static struct resource rb4xx_spi_resources[] = {
- {
- .start = AR71XX_SPI_BASE,
- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rb4xx_spi_device = {
- .name = "rb4xx-spi",
- .id = -1,
- .resource = rb4xx_spi_resources,
- .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
-};
-
-static void __init rb4xx_generic_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_keys),
- rb4xx_gpio_keys);
-
- spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
- platform_device_register(&rb4xx_spi_device);
- platform_device_register(&rb4xx_nand_device);
-}
-
-static void __init rb411_setup(void)
-{
- rb4xx_generic_setup();
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ath79_register_mdio(0, 0xfffffffc);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = 0x00000003;
-
- ath79_register_eth(0);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
- rb411_setup);
-
-static void __init rb411u_setup(void)
-{
- rb411_setup();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
- rb411u_setup);
-
-#define RB433_LAN_PHYMASK BIT(0)
-#define RB433_WAN_PHYMASK BIT(4)
-#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
-
-static void __init rb433_setup(void)
-{
- rb4xx_generic_setup();
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
- rb433_setup);
-
-static void __init rb433u_setup(void)
-{
- rb433_setup();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
- rb433u_setup);
-
-#define RB450_LAN_PHYMASK BIT(0)
-#define RB450_WAN_PHYMASK BIT(4)
-#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
-
-static void __init rb450_generic_setup(int gige)
-{
- rb4xx_generic_setup();
- ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
- ath79_eth0_data.phy_if_mode = (gige) ?
- PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = (gige) ?
- PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-}
-
-static void __init rb450_setup(void)
-{
- rb450_generic_setup(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
- rb450_setup);
-
-static void __init rb450g_setup(void)
-{
- rb450_generic_setup(1);
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
- rb450g_setup);
-
-static void __init rb493_setup(void)
-{
- rb4xx_generic_setup();
-
- ath79_register_mdio(0, 0x3fffff00);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x00000001;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
- rb493_setup);
-
-#define RB493G_GPIO_MDIO_MDC 7
-#define RB493G_GPIO_MDIO_DATA 8
-
-#define RB493G_MDIO_PHYMASK BIT(0)
-
-static struct mdio_gpio_platform_data rb493g_mdio_data = {
- .mdc = RB493G_GPIO_MDIO_MDC,
- .mdio = RB493G_GPIO_MDIO_DATA,
-
- .phy_mask = ~RB493G_MDIO_PHYMASK,
-};
-
-static struct platform_device rb493g_mdio_device = {
- .name = "mdio-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rb493g_mdio_data,
- },
-};
-
-static void __init rb493g_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
-
- spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
- platform_device_register(&rb4xx_spi_device);
- platform_device_register(&rb4xx_nand_device);
-
- ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
- ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- platform_device_register(&rb493g_mdio_device);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_usb();
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
- rb493g_setup);
+++ /dev/null
-/*
- * MikroTik RouterBOARD 750 support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/mach-rb750.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "machtypes.h"
-
-static struct rb750_led_data rb750_leds[] = {
- {
- .name = "rb750:green:act",
- .mask = RB750_LED_ACT,
- .active_low = 1,
- }, {
- .name = "rb750:green:port1",
- .mask = RB750_LED_PORT5,
- .active_low = 1,
- }, {
- .name = "rb750:green:port2",
- .mask = RB750_LED_PORT4,
- .active_low = 1,
- }, {
- .name = "rb750:green:port3",
- .mask = RB750_LED_PORT3,
- .active_low = 1,
- }, {
- .name = "rb750:green:port4",
- .mask = RB750_LED_PORT2,
- .active_low = 1,
- }, {
- .name = "rb750:green:port5",
- .mask = RB750_LED_PORT1,
- .active_low = 1,
- }
-};
-
-static struct rb750_led_platform_data rb750_leds_data = {
- .num_leds = ARRAY_SIZE(rb750_leds),
- .leds = rb750_leds,
-};
-
-static struct platform_device rb750_leds_device = {
- .name = "leds-rb750",
- .dev = {
- .platform_data = &rb750_leds_data,
- }
-};
-
-static struct platform_device rb750_nand_device = {
- .name = "rb750-nand",
- .id = -1,
-};
-
-int rb750_latch_change(u32 mask_clr, u32 mask_set)
-{
- static DEFINE_SPINLOCK(lock);
- static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
- static u32 latch_oe;
- static u32 latch_clr;
- unsigned long flags;
- u32 t;
- int ret = 0;
-
- spin_lock_irqsave(&lock, flags);
-
- if ((mask_clr & BIT(31)) != 0 &&
- (latch_set & RB750_LVC573_LE) == 0) {
- goto unlock;
- }
-
- latch_set = (latch_set | mask_set) & ~mask_clr;
- latch_clr = (latch_clr | mask_clr) & ~mask_set;
-
- if (latch_oe == 0)
- latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
-
- if (likely(latch_set & RB750_LVC573_LE)) {
- void __iomem *base = ath79_gpio_base;
-
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- t |= mask_clr | latch_oe | mask_set;
-
- __raw_writel(t, base + AR71XX_GPIO_REG_OE);
- __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
- __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
- } else if (mask_clr & RB750_LVC573_LE) {
- void __iomem *base = ath79_gpio_base;
-
- latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
- }
-
- ret = 1;
-
-unlock:
- spin_unlock_irqrestore(&lock, flags);
- return ret;
-}
-EXPORT_SYMBOL_GPL(rb750_latch_change);
-
-void rb750_nand_pins_enable(void)
-{
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_SPI_EN);
-}
-EXPORT_SYMBOL_GPL(rb750_nand_pins_enable);
-
-void rb750_nand_pins_disable(void)
-{
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
- AR724X_GPIO_FUNC_JTAG_DISABLE);
-}
-EXPORT_SYMBOL_GPL(rb750_nand_pins_disable);
-
-static void __init rb750_setup(void)
-{
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- platform_device_register(&rb750_leds_device);
- platform_device_register(&rb750_nand_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
- rb750_setup);
+++ /dev/null
-/*
- * Redwave RW2458N support
- *
- * Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define RW2458N_GPIO_LED_D3 1
-#define RW2458N_GPIO_LED_D4 0
-#define RW2458N_GPIO_LED_D5 11
-#define RW2458N_GPIO_LED_D6 7
-#define RW2458N_GPIO_BTN_RESET 12
-
-#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RW2458N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-#define RW2458N_WAN_PHYMASK BIT(4)
-
-static struct gpio_led rw2458n_leds_gpio[] __initdata = {
- {
- .name = "rw2458n:green:d3",
- .gpio = RW2458N_GPIO_LED_D3,
- .active_low = 1,
- }, {
- .name = "rw2458n:green:d4",
- .gpio = RW2458N_GPIO_LED_D4,
- .active_low = 1,
- }, {
- .name = "rw2458n:green:d5",
- .gpio = RW2458N_GPIO_LED_D5,
- .active_low = 1,
- }, {
- .name = "rw2458n:green:d6",
- .gpio = RW2458N_GPIO_LED_D6,
- .active_low = 1,
- }
-};
-
-static const char *rw2458n_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data rw2458n_flash_data = {
- .part_probes = rw2458n_part_probes,
-};
-
-static void __init rw2458n_setup(void)
-{
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&rw2458n_flash_data);
-
- ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap91_pci_init(ee, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
- rw2458n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rw2458n_gpio_keys),
- rw2458n_gpio_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
- rw2458n_setup);
+++ /dev/null
-/*
- * TrendNET TEW-632BRP board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define TEW_632BRP_GPIO_LED_STATUS 1
-#define TEW_632BRP_GPIO_LED_WPS 3
-#define TEW_632BRP_GPIO_LED_WLAN 6
-#define TEW_632BRP_GPIO_BTN_WPS 12
-#define TEW_632BRP_GPIO_BTN_RESET 21
-
-#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
-
-#define TEW_632BRP_CONFIG_ADDR 0x1f020000
-#define TEW_632BRP_CONFIG_SIZE 0x10000
-
-static struct mtd_partition tew_632brp_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "config",
- .offset = 0x020000,
- .size = 0x010000,
- }, {
- .name = "kernel",
- .offset = 0x030000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x110000,
- .size = 0x2e0000,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x030000,
- .size = 0x3c0000,
- }
-};
-
-static struct flash_platform_data tew_632brp_flash_data = {
- .parts = tew_632brp_partitions,
- .nr_parts = ARRAY_SIZE(tew_632brp_partitions),
-};
-
-static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
- {
- .name = "tew-632brp:green:status",
- .gpio = TEW_632BRP_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "tew-632brp:blue:wps",
- .gpio = TEW_632BRP_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "tew-632brp:green:wlan",
- .gpio = TEW_632BRP_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_632BRP_GPIO_BTN_RESET,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_632BRP_GPIO_BTN_WPS,
- }
-};
-
-#define TEW_632BRP_LAN_PHYMASK BIT(0)
-#define TEW_632BRP_WAN_PHYMASK BIT(4)
-#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \
- TEW_632BRP_WAN_PHYMASK))
-
-static void __init tew_632brp_setup(void)
-{
- const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
- u8 *wlan_mac = NULL;
-
- if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
- "lan_mac=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- wlan_mac = mac;
- }
-
- ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&tew_632brp_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
- tew_632brp_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_632brp_gpio_keys),
- tew_632brp_gpio_keys);
-
- ath79_register_wmac(eeprom, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
- tew_632brp_setup);
+++ /dev/null
-/*
- * TRENDnet TEW-673GRU board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TEW673GRU_GPIO_LCD_SCK 0
-#define TEW673GRU_GPIO_LCD_MOSI 1
-#define TEW673GRU_GPIO_LCD_MISO 2
-#define TEW673GRU_GPIO_LCD_CS 6
-
-#define TEW673GRU_GPIO_LED_WPS 9
-
-#define TEW673GRU_GPIO_BTN_RESET 3
-#define TEW673GRU_GPIO_BTN_WPS 8
-
-#define TEW673GRU_GPIO_RTL8366_SDA 5
-#define TEW673GRU_GPIO_RTL8366_SCK 7
-
-#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
-
-#define TEW673GRU_CAL_LOCATION_0 0x1f661000
-#define TEW673GRU_CAL_LOCATION_1 0x1f665000
-
-#define TEW673GRU_MAC_LOCATION_0 0x1f66ffa0
-#define TEW673GRU_MAC_LOCATION_1 0x1f66ffb4
-
-static struct mtd_partition tew673gru_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "config",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x610000,
- }, {
- .name = "caldata",
- .offset = 0x660000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "unknown",
- .offset = 0x670000,
- .size = 0x190000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data tew673gru_flash_data = {
- .parts = tew673gru_partitions,
- .nr_parts = ARRAY_SIZE(tew673gru_partitions),
-};
-
-static struct gpio_led tew673gru_leds_gpio[] __initdata = {
- {
- .name = "trendnet:blue:wps",
- .gpio = TEW673GRU_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW673GRU_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW673GRU_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
- { .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
- .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA,
- .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK,
- .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals),
- .initvals = tew673gru_rtl8366s_initvals,
-};
-
-static struct platform_device tew673gru_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &tew673gru_rtl8366s_data,
- }
-};
-
-static struct spi_board_info tew673gru_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 400000,
- .modalias = "spidev",
- .mode = SPI_MODE_2,
- .controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
- },
-};
-
-static struct spi_gpio_platform_data tew673gru_spi_data = {
- .sck = TEW673GRU_GPIO_LCD_SCK,
- .miso = TEW673GRU_GPIO_LCD_MISO,
- .mosi = TEW673GRU_GPIO_LCD_MOSI,
- .num_chipselect = 1,
-};
-
-static struct platform_device tew673gru_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &tew673gru_spi_data,
- },
-};
-
-static void tew673gru_read_ascii_mac(u8 *dest, unsigned int src_addr)
-{
- int ret;
- u8 *src = (u8 *)KSEG1ADDR(src_addr);
-
- ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &dest[0], &dest[1], &dest[2],
- &dest[3], &dest[4], &dest[5]);
-
- if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN);
-}
-
-static void __init tew673gru_setup(void)
-{
- u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
-
- tew673gru_read_ascii_mac(mac1, TEW673GRU_MAC_LOCATION_0);
- tew673gru_read_ascii_mac(mac2, TEW673GRU_MAC_LOCATION_1);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
- ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
- ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
- ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&tew673gru_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
- tew673gru_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew673gru_gpio_keys),
- tew673gru_gpio_keys);
-
- ath79_register_usb();
-
- platform_device_register(&tew673gru_rtl8366s_device);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- ap94_pci_init((u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0), mac1,
- (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_1), mac2);
-
- spi_register_board_info(tew673gru_spi_info,
- ARRAY_SIZE(tew673gru_spi_info));
- platform_device_register(&tew673gru_spi_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
- tew673gru_setup);
+++ /dev/null
-/*
- * TP-LINK TL-MR11U board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR11U_GPIO_LED_3G 27
-#define TL_MR11U_GPIO_LED_WLAN 26
-#define TL_MR11U_GPIO_LED_LAN 17
-
-#define TL_MR11U_GPIO_BTN_WPS 20
-#define TL_MR11U_GPIO_BTN_RESET 11
-
-#define TL_MR11U_GPIO_USB_POWER 8
-
-#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr11u_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr11u_flash_data = {
- .part_probes = tl_mr11u_part_probes,
-};
-
-static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:3g",
- .gpio = TL_MR11U_GPIO_LED_3G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_MR11U_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan",
- .gpio = TL_MR11U_GPIO_LED_LAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR11U_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR11U_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init tl_mr11u_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_mr11u_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
- tl_mr11u_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr11u_gpio_keys),
- tl_mr11u_gpio_keys);
-
- gpio_request(TL_MR11U_GPIO_USB_POWER, "USB power");
- gpio_direction_output(TL_MR11U_GPIO_USB_POWER, 1);
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
- tl_mr11u_setup);
+++ /dev/null
-/*
- * TP-LINK TL-MR3020 board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR3020_GPIO_LED_3G 27
-#define TL_MR3020_GPIO_LED_WLAN 0
-#define TL_MR3020_GPIO_LED_LAN 17
-#define TL_MR3020_GPIO_LED_WPS 26
-
-#define TL_MR3020_GPIO_BTN_WPS 11
-#define TL_MR3020_GPIO_BTN_SW1 18
-#define TL_MR3020_GPIO_BTN_SW2 20
-
-#define TL_MR3020_GPIO_USB_POWER 8
-
-#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr3020_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr3020_flash_data = {
- .part_probes = tl_mr3020_part_probes,
-};
-
-static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:3g",
- .gpio = TL_MR3020_GPIO_LED_3G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_MR3020_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "tp-link:green:lan",
- .gpio = TL_MR3020_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wps",
- .gpio = TL_MR3020_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3020_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3020_GPIO_BTN_SW1,
- .active_low = 0,
- },
- {
- .desc = "sw2",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3020_GPIO_BTN_SW2,
- .active_low = 0,
- }
-};
-
-static void __init tl_mr3020_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_mr3020_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
- tl_mr3020_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3020_gpio_keys),
- tl_mr3020_gpio_keys);
-
- gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power");
- gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1);
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
- tl_mr3020_setup);
+++ /dev/null
-/*
- * TP-LINK TL-MR3220/3420 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TL_MR3X20_GPIO_LED_QSS 0
-#define TL_MR3X20_GPIO_LED_SYSTEM 1
-#define TL_MR3X20_GPIO_LED_3G 8
-
-#define TL_MR3X20_GPIO_BTN_RESET 11
-#define TL_MR3X20_GPIO_BTN_QSS 12
-
-#define TL_MR3X20_GPIO_USB_POWER 6
-
-#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr3x20_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr3x20_flash_data = {
- .part_probes = tl_mr3x20_part_probes,
-};
-
-static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_MR3X20_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_MR3X20_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:3g",
- .gpio = TL_MR3X20_GPIO_LED_3G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3X20_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3X20_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_ap99_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_mr3x20_flash_data);
-
- ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3x20_gpio_keys),
- tl_mr3x20_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
- /* WAN port */
- ath79_register_eth(0);
-
- ap91_pci_init(ee, mac);
-}
-
-static void __init tl_mr3x20_usb_setup(void)
-{
- /* enable power for the USB port */
- gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power");
- gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1);
-
- ath79_register_usb();
-}
-
-static void __init tl_mr3220_setup(void)
-{
- tl_ap99_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
- tl_mr3x20_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 1);
- tl_mr3x20_usb_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
- tl_mr3220_setup);
-
-static void __init tl_mr3420_setup(void)
-{
- tl_ap99_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
- tl_mr3x20_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- tl_mr3x20_usb_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
- tl_mr3420_setup);
-
-static void __init tl_wr841n_v7_setup(void)
-{
- tl_ap99_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
- tl_mr3x20_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
- "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WA901N/ND v2 board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
- * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA901ND_V2_GPIO_LED_QSS 4
-#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2
-#define TL_WA901ND_V2_GPIO_LED_WLAN 9
-
-#define TL_WA901ND_V2_GPIO_BTN_RESET 3
-#define TL_WA901ND_V2_GPIO_BTN_QSS 7
-
-#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \
- (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa901nd_v2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_v2_flash_data = {
- .part_probes = tl_wa901nd_v2_part_probes,
-};
-
-static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WA901ND_V2_GPIO_LED_QSS,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA901ND_V2_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_V2_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_V2_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wa901nd_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = 0x00001000;
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
- AR71XX_RESET_GE0_PHY;
- ath79_register_eth(0);
-
- ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
- tl_wa901nd_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
- tl_wa901nd_v2_gpio_keys);
-
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
- "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WA901N/ND v1 board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define TL_WA901ND_GPIO_LED_QSS 0
-#define TL_WA901ND_GPIO_LED_SYSTEM 1
-#define TL_WA901ND_GPIO_LED_LAN 13
-
-#define TL_WA901ND_GPIO_BTN_RESET 11
-#define TL_WA901ND_GPIO_BTN_QSS 12
-
-#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa901nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_flash_data = {
- .part_probes = tl_wa901nd_part_probes,
-};
-
-static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan",
- .gpio = TL_WA901ND_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WA901ND_GPIO_LED_QSS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wa901nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- /*
- * ath79_eth0 would be the WAN port, but is not connected on
- * the TL-WA901ND. ath79_eth1 connects to the internal switch chip,
- * however we have a single LAN port only.
- */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&tl_wa901nd_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
- tl_wa901nd_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa901nd_gpio_keys),
- tl_wa901nd_gpio_keys);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
- tl_wa901nd_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR1043N/ND board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR1043ND_GPIO_LED_USB 1
-#define TL_WR1043ND_GPIO_LED_SYSTEM 2
-#define TL_WR1043ND_GPIO_LED_QSS 5
-#define TL_WR1043ND_GPIO_LED_WLAN 9
-
-#define TL_WR1043ND_GPIO_BTN_RESET 3
-#define TL_WR1043ND_GPIO_BTN_QSS 7
-
-#define TL_WR1043ND_GPIO_RTL8366_SDA 18
-#define TL_WR1043ND_GPIO_RTL8366_SCK 19
-
-#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr1043nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr1043nd_flash_data = {
- .part_probes = tl_wr1043nd_part_probes,
-};
-
-static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:usb",
- .gpio = TL_WR1043ND_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR1043ND_GPIO_LED_QSS,
- .active_low = 0,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR1043ND_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
- .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
- .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device tl_wr1043nd_rtl8366rb_device = {
- .name = RTL8366RB_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &tl_wr1043nd_rtl8366rb_data,
- }
-};
-
-static void __init tl_wr1043nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x1a000000;
-
- ath79_register_eth(0);
-
- ath79_register_usb();
-
- ath79_register_m25p80(&tl_wr1043nd_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
- tl_wr1043nd_leds_gpio);
-
- platform_device_register(&tl_wr1043nd_rtl8366rb_device);
-
- ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr1043nd_gpio_keys),
- tl_wr1043nd_gpio_keys);
-
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
- tl_wr1043nd_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR2543N/ND board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/rtl8367.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TL_WR2543N_GPIO_LED_WPS 0
-#define TL_WR2543N_GPIO_LED_USB 8
-
-#define TL_WR2543N_GPIO_BTN_RESET 11
-#define TL_WR2543N_GPIO_BTN_WPS 12
-
-#define TL_WR2543N_GPIO_RTL8367_SDA 1
-#define TL_WR2543N_GPIO_RTL8367_SCK 6
-
-#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr2543n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr2543n_flash_data = {
- .part_probes = tl_wr2543n_part_probes,
- .max_read_len = 64,
-};
-
-static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:usb",
- .gpio = TL_WR2543N_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wps",
- .gpio = TL_WR2543N_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR2543N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR2543N_GPIO_BTN_WPS,
- }
-};
-
-static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
- .mode = RTL8367_EXTIF_MODE_RGMII,
- .txdelay = 1,
- .rxdelay = 0,
- .ability = {
- .force_mode = 1,
- .txpause = 1,
- .rxpause = 1,
- .link = 1,
- .duplex = 1,
- .speed = RTL8367_PORT_SPEED_1000,
- },
-};
-
-static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
- .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
- .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
- .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
-};
-
-static struct platform_device tl_wr2543n_rtl8367_device = {
- .name = RTL8367_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &tl_wr2543n_rtl8367_data,
- }
-};
-
-static void __init tl_wr2543n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr2543n_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
- tl_wr2543n_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr2543n_gpio_keys),
- tl_wr2543n_gpio_keys);
- ath79_register_usb();
- ap91_pci_init(eeprom, mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x1a000000;
-
- ath79_register_eth(0);
-
- platform_device_register(&tl_wr2543n_rtl8367_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
- tl_wr2543n_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR703N board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR703N_GPIO_LED_SYSTEM 27
-#define TL_WR703N_GPIO_BTN_RESET 11
-
-#define TL_WR703N_GPIO_USB_POWER 8
-
-#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr703n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr703n_flash_data = {
- .part_probes = tl_wr703n_part_probes,
-};
-
-static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR703N_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR703N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init tl_wr703n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr703n_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
- tl_wr703n_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr703n_gpio_keys),
- tl_wr703n_gpio_keys);
-
- gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power");
- gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1);
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
- tl_wr703n_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR741ND v4 board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR741NDV4_GPIO_BTN_RESET 11
-#define TL_WR741NDV4_GPIO_BTN_WPS 26
-
-#define TL_WR741NDV4_GPIO_LED_WLAN 0
-#define TL_WR741NDV4_GPIO_LED_QSS 1
-#define TL_WR741NDV4_GPIO_LED_WAN 13
-#define TL_WR741NDV4_GPIO_LED_LAN1 14
-#define TL_WR741NDV4_GPIO_LED_LAN2 15
-#define TL_WR741NDV4_GPIO_LED_LAN3 16
-#define TL_WR741NDV4_GPIO_LED_LAN4 17
-
-#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
-
-#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr741ndv4_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr741ndv4_flash_data = {
- .part_probes = tl_wr741ndv4_part_probes,
-};
-
-static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN1,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN2,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN3,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR741NDV4_GPIO_LED_QSS,
- .active_low = 0,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR741NDV4_GPIO_LED_WAN,
- .active_low = 0,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR741NDV4_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741NDV4_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WPS",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741NDV4_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wr741ndv4_gmac_setup(void)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
-
- t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
- t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
- __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init tl_wr741ndv4_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- tl_wr741ndv4_gmac_setup();
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
- tl_wr741ndv4_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
- tl_wr741ndv4_gpio_keys);
-
- ath79_register_m25p80(&tl_wr741ndv4_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
- "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR741ND board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define TL_WR741ND_GPIO_LED_QSS 0
-#define TL_WR741ND_GPIO_LED_SYSTEM 1
-#define TL_WR741ND_GPIO_LED_LAN1 13
-#define TL_WR741ND_GPIO_LED_LAN2 14
-#define TL_WR741ND_GPIO_LED_LAN3 15
-#define TL_WR741ND_GPIO_LED_LAN4 16
-#define TL_WR741ND_GPIO_LED_WAN 17
-
-#define TL_WR741ND_GPIO_BTN_RESET 11
-#define TL_WR741ND_GPIO_BTN_QSS 12
-
-#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr741nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr741nd_flash_data = {
- .part_probes = tl_wr741nd_part_probes,
-};
-
-static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR741ND_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR741ND_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR741ND_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR741ND_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR741ND_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR741ND_GPIO_LED_WAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wr741nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr741nd_flash_data);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
- tl_wr741nd_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr741nd_gpio_keys),
- tl_wr741nd_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ap9x_pci_setup_wmac_led_pin(0, 1);
- ap91_pci_init(ee, mac);
-}
-MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
- tl_wr741nd_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR841N/ND v1 board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
-#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4
-#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5
-
-#define TL_WR841ND_V1_GPIO_BTN_RESET 3
-#define TL_WR841ND_V1_GPIO_BTN_QSS 7
-
-#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
- (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition tl_wr841n_v1_partitions[] = {
- {
- .name = "redboot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x280000,
- }, {
- .name = "config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x020000,
- .size = 0x3c0000,
- }
-};
-
-static struct flash_platform_data tl_wr841n_v1_flash_data = {
- .parts = tl_wr841n_v1_partitions,
- .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
-};
-
-static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:red:qss",
- .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
- }
-};
-
-static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
- .port_names[0] = "wan",
- .port_names[1] = "lan1",
- .port_names[2] = "lan2",
- .port_names[3] = "lan3",
- .port_names[4] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
- .nr_chips = 1,
- .chip = &tl_wr841n_v1_dsa_chip,
-};
-
-static void __init tl_wr841n_v1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
- &tl_wr841n_v1_dsa_data);
-
- ath79_register_m25p80(&tl_wr841n_v1_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
- tl_wr841n_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
- tl_wr841n_v1_gpio_keys);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
- tl_wr841n_v1_setup);
+++ /dev/null
-/*
- * TP-LINK TL-WR941ND board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR941ND_GPIO_LED_SYSTEM 2
-#define TL_WR941ND_GPIO_LED_QSS_RED 4
-#define TL_WR941ND_GPIO_LED_QSS_GREEN 5
-#define TL_WR941ND_GPIO_LED_WLAN 9
-
-#define TL_WR941ND_GPIO_BTN_RESET 3
-#define TL_WR941ND_GPIO_BTN_QSS 7
-
-#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr941nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr941nd_flash_data = {
- .part_probes = tl_wr941nd_part_probes,
-};
-
-static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:red:qss",
- .gpio = TL_WR941ND_GPIO_LED_QSS_RED,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR941ND_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR941ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR941ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static struct dsa_chip_data tl_wr941nd_dsa_chip = {
- .port_names[0] = "wan",
- .port_names[1] = "lan1",
- .port_names[2] = "lan2",
- .port_names[3] = "lan3",
- .port_names[4] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data tl_wr941nd_dsa_data = {
- .nr_chips = 1,
- .chip = &tl_wr941nd_dsa_chip,
-};
-
-static void __init tl_wr941nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
- &tl_wr941nd_dsa_data);
-
- ath79_register_m25p80(&tl_wr941nd_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
- tl_wr941nd_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr941nd_gpio_keys),
- tl_wr941nd_gpio_keys);
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
- tl_wr941nd_setup);
+++ /dev/null
-/*
- * Ubiquiti RouterStation support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define UBNT_RS_GPIO_LED_RF 2
-#define UBNT_RS_GPIO_SW4 8
-
-#define UBNT_LS_SR71_GPIO_LED_D25 0
-#define UBNT_LS_SR71_GPIO_LED_D26 1
-#define UBNT_LS_SR71_GPIO_LED_D24 2
-#define UBNT_LS_SR71_GPIO_LED_D23 4
-#define UBNT_LS_SR71_GPIO_LED_D22 5
-#define UBNT_LS_SR71_GPIO_LED_D27 6
-#define UBNT_LS_SR71_GPIO_LED_D28 7
-
-#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */
-#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:rf",
- .gpio = UBNT_RS_GPIO_LED_RF,
- .active_low = 0,
- }
-};
-
-static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:d22",
- .gpio = UBNT_LS_SR71_GPIO_LED_D22,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d23",
- .gpio = UBNT_LS_SR71_GPIO_LED_D23,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d24",
- .gpio = UBNT_LS_SR71_GPIO_LED_D24,
- .active_low = 0,
- }, {
- .name = "ubnt:red:d25",
- .gpio = UBNT_LS_SR71_GPIO_LED_D25,
- .active_low = 0,
- }, {
- .name = "ubnt:red:d26",
- .gpio = UBNT_LS_SR71_GPIO_LED_D26,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d27",
- .gpio = UBNT_LS_SR71_GPIO_LED_D27,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d28",
- .gpio = UBNT_LS_SR71_GPIO_LED_D28,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
- {
- .desc = "sw4",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UBNT_RS_GPIO_SW4,
- .active_low = 1,
- }
-};
-
-static const char *ubnt_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data ubnt_flash_data = {
- .part_probes = ubnt_part_probes,
-};
-
-static void __init ubnt_generic_setup(void)
-{
- ath79_register_m25p80(&ubnt_flash_data);
-
- ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_gpio_keys),
- ubnt_gpio_keys);
- ath79_register_pci();
-}
-
-#define UBNT_RS_WAN_PHYMASK BIT(20)
-#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
-
-static void __init ubnt_rs_setup(void)
-{
- ubnt_generic_setup();
-
- ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
-
- /*
- * There is Secondary MAC address duplicate problem with some
- * UBNT HW batches. Do not increase Secondary MAC address by 1
- * but do workaround with 'Locally Administrated' bit.
- */
- ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.speed = SPEED_100;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
- ubnt_rs_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
- ubnt_rs_setup);
-
-#define UBNT_RSPRO_WAN_PHYMASK BIT(4)
-#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-static void __init ubnt_rspro_setup(void)
-{
- ubnt_generic_setup();
-
- ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
- UBNT_RSPRO_LAN_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
-
- /*
- * There is Secondary MAC address duplicate problem with some
- * UBNT HW batches. Do not increase Secondary MAC address by 1
- * but do workaround with 'Locally Administrated' bit.
- */
- ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
- ubnt_rs_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
- ubnt_rspro_setup);
-
-static void __init ubnt_lsx_setup(void)
-{
- ubnt_generic_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
-
-#define UBNT_LSSR71_PHY_MASK BIT(1)
-
-static void __init ubnt_lssr71_setup(void)
-{
- ubnt_generic_setup();
-
- ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
-
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
- ubnt_ls_sr71_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
- ubnt_lssr71_setup);
+++ /dev/null
-/*
- * Buffalo WHR-HP-G300N board support
- *
- * based on ...
- *
- * TP-LINK TL-WR741ND board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WHRHPG300N_GPIO_LED_SECURITY 0
-#define WHRHPG300N_GPIO_LED_DIAG 1
-#define WHRHPG300N_GPIO_LED_ROUTER 6
-
-#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
-#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
-#define WHRHPG300N_GPIO_BTN_RESET 11
-#define WHRHPG300N_GPIO_BTN_AOSS 12
-#define WHRHPG300N_GPIO_LED_LAN1 13
-#define WHRHPG300N_GPIO_LED_LAN2 14
-#define WHRHPG300N_GPIO_LED_LAN3 15
-#define WHRHPG300N_GPIO_LED_LAN4 16
-#define WHRHPG300N_GPIO_LED_WAN 17
-
-#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
-
-#define WHRHPG300N_MAC_OFFSET 0x20c
-
-static struct mtd_partition whrhpg300n_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x03e000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x03e000,
- .size = 0x002000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x040000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x120000,
- .size = 0x2c0000,
- }, {
- .name = "user_property",
- .offset = 0x3e0000,
- .size = 0x010000,
- }, {
- .name = "ART",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x3a0000,
- }
-};
-
-static struct flash_platform_data whrhpg300n_flash_data = {
- .parts = whrhpg300n_partitions,
- .nr_parts = ARRAY_SIZE(whrhpg300n_partitions),
-};
-
-static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
- {
- .name = "buffalo:orange:security",
- .gpio = WHRHPG300N_GPIO_LED_SECURITY,
- .active_low = 1,
- }, {
- .name = "buffalo:red:diag",
- .gpio = WHRHPG300N_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "buffalo:green:router",
- .gpio = WHRHPG300N_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "buffalo:green:wan",
- .gpio = WHRHPG300N_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan1",
- .gpio = WHRHPG300N_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan2",
- .gpio = WHRHPG300N_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan3",
- .gpio = WHRHPG300N_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan4",
- .gpio = WHRHPG300N_GPIO_LED_LAN4,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHRHPG300N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "aoss/wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .gpio = WHRHPG300N_GPIO_BTN_AOSS,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_2,
- .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_3,
- .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }
-};
-
-static void __init whrhpg300n_setup(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
-
- ath79_register_m25p80(&whrhpg300n_flash_data);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
- whrhpg300n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(whrhpg300n_gpio_keys),
- whrhpg300n_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
- /* WAN port */
- ath79_register_eth(0);
-
- ap9x_pci_setup_wmac_led_pin(0, 1);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
- whrhpg300n_setup);
-
-MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
- whrhpg300n_setup);
-
-MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
- whrhpg300n_setup);
+++ /dev/null
-/*
- * Netgear WNDR3700 board support
- *
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WNDR3700_GPIO_LED_WPS_ORANGE 0
-#define WNDR3700_GPIO_LED_POWER_ORANGE 1
-#define WNDR3700_GPIO_LED_POWER_GREEN 2
-#define WNDR3700_GPIO_LED_WPS_GREEN 4
-#define WNDR3700_GPIO_LED_WAN_GREEN 6
-
-#define WNDR3700_GPIO_BTN_WPS 3
-#define WNDR3700_GPIO_BTN_RESET 8
-#define WNDR3700_GPIO_BTN_WIFI 11
-
-#define WNDR3700_GPIO_RTL8366_SDA 5
-#define WNDR3700_GPIO_RTL8366_SCK 7
-
-#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
-
-#define WNDR3700_ETH0_MAC_OFFSET 0
-#define WNDR3700_ETH1_MAC_OFFSET 0x6
-
-#define WNDR3700_WMAC0_MAC_OFFSET 0
-#define WNDR3700_WMAC1_MAC_OFFSET 0xc
-#define WNDR3700_CALDATA0_OFFSET 0x1000
-#define WNDR3700_CALDATA1_OFFSET 0x5000
-
-static struct gpio_led wndr3700_leds_gpio[] __initdata = {
- {
- .name = "wndr3700:green:power",
- .gpio = WNDR3700_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "wndr3700:orange:power",
- .gpio = WNDR3700_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- }, {
- .name = "wndr3700:green:wps",
- .gpio = WNDR3700_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- }, {
- .name = "wndr3700:orange:wps",
- .gpio = WNDR3700_GPIO_LED_WPS_ORANGE,
- .active_low = 1,
- }, {
- .name = "wndr3700:green:wan",
- .gpio = WNDR3700_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR3700_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR3700_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "wifi",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR3700_GPIO_BTN_WIFI,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
- .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
- .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device wndr3700_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wndr3700_rtl8366s_data,
- }
-};
-
-static void __init wndr3700_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /*
- * The eth0 and wmac0 interfaces share the same MAC address which
- * can lead to problems if operated unbridged. Set the locally
- * administered bit on the eth0 MAC to make it unique.
- */
- ath79_init_local_mac(ath79_eth0_data.mac_addr,
- art + WNDR3700_ETH0_MAC_OFFSET);
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
- ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + WNDR3700_ETH1_MAC_OFFSET, 0);
- ath79_eth1_pll_data.pll_1000 = 0x11110000;
- ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
- wndr3700_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wndr3700_gpio_keys),
- wndr3700_gpio_keys);
-
- platform_device_register(&wndr3700_rtl8366s_device);
- platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
- ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
-
- /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
- ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
-
- ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
- art + WNDR3700_WMAC0_MAC_OFFSET,
- art + WNDR3700_CALDATA1_OFFSET,
- art + WNDR3700_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
- "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
- wndr3700_setup);
+++ /dev/null
-/*
- * NETGEAR WNR2000 board support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WNR2000_GPIO_LED_PWR_GREEN 14
-#define WNR2000_GPIO_LED_PWR_AMBER 7
-#define WNR2000_GPIO_LED_WPS 4
-#define WNR2000_GPIO_LED_WLAN 6
-#define WNR2000_GPIO_BTN_RESET 21
-#define WNR2000_GPIO_BTN_WPS 8
-
-#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wnr2000_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x010000,
- }, {
- .name = "rootfs",
- .offset = 0x050000,
- .size = 0x240000,
- }, {
- .name = "user-config",
- .offset = 0x290000,
- .size = 0x010000,
- }, {
- .name = "uImage",
- .offset = 0x2a0000,
- .size = 0x120000,
- }, {
- .name = "language_table",
- .offset = 0x3c0000,
- .size = 0x020000,
- }, {
- .name = "rootfs_checksum",
- .offset = 0x3e0000,
- .size = 0x010000,
- }, {
- .name = "art",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data wnr2000_flash_data = {
- .parts = wnr2000_partitions,
- .nr_parts = ARRAY_SIZE(wnr2000_partitions),
-};
-
-static struct gpio_led wnr2000_leds_gpio[] __initdata = {
- {
- .name = "wnr2000:green:power",
- .gpio = WNR2000_GPIO_LED_PWR_GREEN,
- .active_low = 1,
- }, {
- .name = "wnr2000:amber:power",
- .gpio = WNR2000_GPIO_LED_PWR_AMBER,
- .active_low = 1,
- }, {
- .name = "wnr2000:green:wps",
- .gpio = WNR2000_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "wnr2000:blue:wlan",
- .gpio = WNR2000_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000_GPIO_BTN_RESET,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000_GPIO_BTN_WPS,
- }
-};
-
-static void __init wnr2000_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&wnr2000_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
- wnr2000_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wnr2000_gpio_keys),
- wnr2000_gpio_keys);
-
- ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
+++ /dev/null
-/*
- * Compex WP543/WPJ543 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WP543_GPIO_SW6 2
-#define WP543_GPIO_LED_1 3
-#define WP543_GPIO_LED_2 4
-#define WP543_GPIO_LED_WLAN 5
-#define WP543_GPIO_LED_CONN 6
-#define WP543_GPIO_LED_DIAG 7
-#define WP543_GPIO_SW4 8
-
-#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wp543_leds_gpio[] __initdata = {
- {
- .name = "wp543:green:led1",
- .gpio = WP543_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "wp543:green:led2",
- .gpio = WP543_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "wp543:green:wlan",
- .gpio = WP543_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "wp543:green:conn",
- .gpio = WP543_GPIO_LED_CONN,
- .active_low = 1,
- }, {
- .name = "wp543:green:diag",
- .gpio = WP543_GPIO_LED_DIAG,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
- {
- .desc = "sw6",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WP543_GPIO_SW6,
- }, {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WP543_GPIO_SW4,
- }
-};
-
-static const char *wp543_part_probes[] = {
- "MyLoader",
- NULL,
-};
-
-static struct flash_platform_data wp543_flash_data = {
- .part_probes = wp543_part_probes,
-};
-
-static void __init wp543_setup(void)
-{
- ath79_register_m25p80(&wp543_flash_data);
-
- ath79_register_mdio(0, 0xfffffff0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = 0x0f;
- ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
- AR71XX_RESET_GE0_PHY;
- ath79_register_eth(0);
-
- ath79_register_usb();
- ath79_register_pci();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
- wp543_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wp543_gpio_keys),
- wp543_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
+++ /dev/null
-/*
- * Compex WPE72 board support
- *
- * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include<asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WPE72_GPIO_RESET 12
-#define WPE72_GPIO_LED_DIAG 13
-#define WPE72_GPIO_LED_1 14
-#define WPE72_GPIO_LED_2 15
-#define WPE72_GPIO_LED_3 16
-#define WPE72_GPIO_LED_4 17
-
-#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wpe72_leds_gpio[] __initdata = {
- {
- .name = "wpe72:green:led1",
- .gpio = WPE72_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "wpe72:green:led2",
- .gpio = WPE72_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "wpe72:green:led3",
- .gpio = WPE72_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "wpe72:green:led4",
- .gpio = WPE72_GPIO_LED_4,
- .active_low = 1,
- }, {
- .name = "wpe72:green:diag",
- .gpio = WPE72_GPIO_LED_DIAG,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPE72_GPIO_RESET,
- }
-};
-
-static const char *wpe72_part_probes[] = {
- "MyLoader",
- NULL,
-};
-
-static struct flash_platform_data wpe72_flash_data = {
- .part_probes = wpe72_part_probes,
-};
-
-static void __init wpe72_setup(void)
-{
- ath79_register_m25p80(&wpe72_flash_data);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
- ath79_register_pci();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
- wpe72_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpe72_gpio_keys),
- wpe72_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
+++ /dev/null
-/*
- * Linksys WRT160NL board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "nvram.h"
-#include "machtypes.h"
-
-#define WRT160NL_GPIO_LED_POWER 14
-#define WRT160NL_GPIO_LED_WPS_AMBER 9
-#define WRT160NL_GPIO_LED_WPS_BLUE 8
-#define WRT160NL_GPIO_LED_WLAN 6
-
-#define WRT160NL_GPIO_BTN_WPS 7
-#define WRT160NL_GPIO_BTN_RESET 21
-
-#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL)
-
-#define WRT160NL_NVRAM_ADDR 0x1f7e0000
-#define WRT160NL_NVRAM_SIZE 0x10000
-
-static const char *wrt160nl_part_probes[] = {
- "wrt160nl",
- NULL,
-};
-
-static struct flash_platform_data wrt160nl_flash_data = {
- .part_probes = wrt160nl_part_probes,
-};
-
-static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
- {
- .name = "wrt160nl:blue:power",
- .gpio = WRT160NL_GPIO_LED_POWER,
- .active_low = 1,
- .default_trigger = "default-on",
- }, {
- .name = "wrt160nl:amber:wps",
- .gpio = WRT160NL_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- }, {
- .name = "wrt160nl:blue:wps",
- .gpio = WRT160NL_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- }, {
- .name = "wrt160nl:blue:wlan",
- .gpio = WRT160NL_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WRT160NL_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WRT160NL_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init wrt160nl_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
-
- if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
- "lan_hwaddr=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- }
-
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = 0x01;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&wrt160nl_flash_data);
-
- ath79_register_usb();
-
- if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
- "wl0_hwaddr=", mac) == 0)
- ath79_register_wmac(eeprom, mac);
- else
- ath79_register_wmac(eeprom, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
- wrt160nl_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wrt160nl_gpio_keys),
- wrt160nl_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
- wrt160nl_setup);
+++ /dev/null
-/*
- * Linksys WRT400N board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WRT400N_GPIO_LED_POWER 1
-#define WRT400N_GPIO_LED_WPS_BLUE 4
-#define WRT400N_GPIO_LED_WPS_AMBER 5
-#define WRT400N_GPIO_LED_WLAN 6
-
-#define WRT400N_GPIO_BTN_RESET 8
-#define WRT400N_GPIO_BTN_WLSEC 3
-
-#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL)
-
-#define WRT400N_MAC_ADDR_OFFSET 0x120c
-#define WRT400N_CALDATA0_OFFSET 0x1000
-#define WRT400N_CALDATA1_OFFSET 0x5000
-
-static struct mtd_partition wrt400n_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "env",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "linux",
- .offset = 0x040000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x180000,
- .size = 0x630000,
- }, {
- .name = "nvram",
- .offset = 0x7b0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "factory",
- .offset = 0x7c0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "language",
- .offset = 0x7d0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "caldata",
- .offset = 0x7f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x770000,
- }
-};
-
-static struct flash_platform_data wrt400n_flash_data = {
- .parts = wrt400n_partitions,
- .nr_parts = ARRAY_SIZE(wrt400n_partitions),
-};
-
-static struct gpio_led wrt400n_leds_gpio[] __initdata = {
- {
- .name = "wrt400n:blue:wps",
- .gpio = WRT400N_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- }, {
- .name = "wrt400n:amber:wps",
- .gpio = WRT400N_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- }, {
- .name = "wrt400n:blue:wlan",
- .gpio = WRT400N_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "wrt400n:blue:power",
- .gpio = WRT400N_GPIO_LED_POWER,
- .active_low = 0,
- .default_trigger = "default-on",
- }
-};
-
-static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
- .gpio = WRT400N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wlsec",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
- .gpio = WRT400N_GPIO_BTN_WLSEC,
- .active_low = 1,
- }
-};
-
-static void __init wrt400n_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&wrt400n_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
- wrt400n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wrt400n_gpio_keys),
- wrt400n_gpio_keys);
-
- ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
- art + WRT400N_CALDATA1_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
+++ /dev/null
-/*
- * Buffalo WZR-HP-AG300H board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPAG300H_MAC_OFFSET 0x20c
-#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpag300h_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e90000,
- }, {
- .name = "user_property",
- .offset = 0x1ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
- }
-};
-
-static struct flash_platform_data wzrhpag300h_flash_data = {
- .parts = wzrhpag300h_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
-};
-
-static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 1,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 3,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 5,
- .active_low = 1,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 6,
- .active_low = 1,
- }, {
- .desc = "router_off",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 1,
- }
-};
-
-static void __init wzrhpag300h_setup(void)
-{
- u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
- u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
- u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
-
- ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = BIT(4);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
- gpio_request(2, "usb");
- gpio_direction_output(2, 1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
- wzrhpag300h_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpag300h_gpio_keys),
- wzrhpag300h_gpio_keys);
-
- ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
-
- ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
- "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
-
+++ /dev/null
-/*
- * Buffalo WZR-HP-G300NH board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/nxp_74hc153.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WZRHPG300NH_GPIO_LED_USB 0
-#define WZRHPG300NH_GPIO_LED_DIAG 1
-#define WZRHPG300NH_GPIO_LED_WIRELESS 6
-#define WZRHPG300NH_GPIO_LED_SECURITY 17
-#define WZRHPG300NH_GPIO_LED_ROUTER 18
-
-#define WZRHPG300NH_GPIO_RTL8366_SDA 19
-#define WZRHPG300NH_GPIO_RTL8366_SCK 20
-
-#define WZRHPG300NH_GPIO_74HC153_S0 9
-#define WZRHPG300NH_GPIO_74HC153_S1 11
-#define WZRHPG300NH_GPIO_74HC153_1Y 12
-#define WZRHPG300NH_GPIO_74HC153_2Y 14
-
-#define WZRHPG300NH_GPIO_EXP_BASE 32
-#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0)
-#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1)
-#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2)
-#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3)
-#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5)
-#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
-#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7)
-
-#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
-
-#define WZRHPG300NH_MAC_OFFSET 0x20c
-
-static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e60000,
- }, {
- .name = "user_property",
- .offset = 0x1fc0000,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x1fe0000,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f60000,
- }
-};
-
-static struct physmap_flash_data wzrhpg300nh_flash_data = {
- .width = 2,
- .parts = wzrhpg300nh_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
-};
-
-#define WZRHPG300NH_FLASH_BASE 0x1e000000
-#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024)
-
-static struct resource wzrhpg300nh_flash_resources[] = {
- [0] = {
- .start = WZRHPG300NH_FLASH_BASE,
- .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device wzrhpg300nh_flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = wzrhpg300nh_flash_resources,
- .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources),
- .dev = {
- .platform_data = &wzrhpg300nh_flash_data,
- }
-};
-
-static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
- {
- .name = "buffalo:orange:security",
- .gpio = WZRHPG300NH_GPIO_LED_SECURITY,
- .active_low = 1,
- }, {
- .name = "buffalo:green:wireless",
- .gpio = WZRHPG300NH_GPIO_LED_WIRELESS,
- .active_low = 1,
- }, {
- .name = "buffalo:green:router",
- .gpio = WZRHPG300NH_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "buffalo:red:diag",
- .gpio = WZRHPG300NH_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "buffalo:blue:usb",
- .gpio = WZRHPG300NH_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_AOSS,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_USB,
- .active_low = 1,
- }, {
- .desc = "qos_on",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON,
- .active_low = 0,
- }, {
- .desc = "qos_off",
- .type = EV_KEY,
- .code = BTN_4,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF,
- .active_low = 0,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON,
- .active_low = 0,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
- .active_low = 0,
- }
-};
-
-static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
- .gpio_base = WZRHPG300NH_GPIO_EXP_BASE,
- .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0,
- .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1,
- .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y,
- .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y,
-};
-
-static struct platform_device wzrhpg300nh_74hc153_device = {
- .name = NXP_74HC153_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wzrhpg300nh_74hc153_data,
- }
-};
-
-static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
- .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
- .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device wzrhpg300nh_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wzrhpg300nh_rtl8366_data,
- }
-};
-
-static struct platform_device wzrhpg300nh_rtl8366rb_device = {
- .name = RTL8366RB_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wzrhpg300nh_rtl8366_data,
- }
-};
-
-static void __init wzrhpg300nh_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
- bool hasrtl8366rb = false;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
- hasrtl8366rb = true;
-
- if (hasrtl8366rb) {
- ath79_eth0_pll_data.pll_1000 = 0x1f000000;
- ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
- ath79_eth1_pll_data.pll_1000 = 0x100;
- ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
- } else {
- ath79_eth0_pll_data.pll_1000 = 0x1e000100;
- ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
- ath79_eth1_pll_data.pll_1000 = 0x1e000100;
- ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
- }
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
- ath79_register_wmac(eeprom, NULL);
-
- platform_device_register(&wzrhpg300nh_74hc153_device);
- platform_device_register(&wzrhpg300nh_flash_device);
-
- if (hasrtl8366rb)
- platform_device_register(&wzrhpg300nh_rtl8366rb_device);
- else
- platform_device_register(&wzrhpg300nh_rtl8366s_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
- wzrhpg300nh_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg300nh_gpio_keys),
- wzrhpg300nh_gpio_keys);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
- "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
+++ /dev/null
-/*
- * Buffalo WZR-HP-G300NH2 board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPG300NH2_MAC_OFFSET 0x20c
-#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e90000,
- }, {
- .name = "user_property",
- .offset = 0x1ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
- }
-};
-
-static struct flash_platform_data wzrhpg300nh2_flash_data = {
- .parts = wzrhpg300nh2_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
-};
-
-static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 16,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
- {
- .name = "buffalo:blue:usb",
- .gpio = 4,
- .active_low = 1,
- },
- {
- .name = "buffalo:orange:security",
- .gpio = 6,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:router",
- .gpio = 7,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine_on",
- .gpio = 8,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine_off",
- .gpio = 9,
- .active_low = 1,
- },
-};
-
-/* The AOSS button is wmac gpio 12 */
-static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 1,
- }, {
- .desc = "qos",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 0,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 8,
- .active_low = 0,
- },
-};
-
-static void __init wzrhpg300nh2_setup(void)
-{
-
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
- /* There is an eth1 but it is not connected to the switch */
-
- ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
- ath79_register_mdio(0, ~(BIT(0)));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_eth(0);
- ath79_register_usb();
- /* gpio13 is usb power. Turn it on. */
- gpio_request(13, "usb");
- gpio_direction_output(13, 1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
- wzrhpg300nh2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
- wzrhpg300nh2_gpio_keys);
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
- ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
-
- ap91_pci_init(eeprom, mac0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
- "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
+++ /dev/null
-/*
- * Buffalo WZR-HP-G450G board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpg450h_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- }, {
- .name = "ART",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "uImage",
- .offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e80000,
- }, {
- .name = "user_property",
- .offset = 0x1fe0000,
- .size = 0x0020000,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f80000,
- }
-};
-
-static struct flash_platform_data wzrhpg450h_flash_data = {
- .parts = wzrhpg450h_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
-};
-
-static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 14,
- .active_low = 1,
- },
- {
- .name = "buffalo:orange:security",
- .gpio = 13,
- .active_low = 1,
- },
-};
-
-
-static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
- {
- .name = "buffalo:blue:movie_engine",
- .gpio = 13,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:router",
- .gpio = 14,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 6,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 8,
- .active_low = 1,
- }, {
- .desc = "movie_engine",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 0,
- }, {
- .desc = "router_off",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 0,
- }
-};
-
-
-static void __init wzrhpg450h_init(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *mac = (u8 *) ee + 2;
-
- ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
-
- ath79_register_mdio(0, ~BIT(0));
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
- wzrhpg450h_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg450h_gpio_keys),
- wzrhpg450h_gpio_keys);
-
- ath79_register_eth(0);
-
- ath79_register_usb();
- gpio_request(16, "usb");
- gpio_direction_output(16, 1);
-
- ap91_pci_init(ee, NULL);
- ap9x_pci_setup_wmac_led_pin(0, 15);
- ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
- ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
- wzrhpg450h_init);
+++ /dev/null
-/*
- * Zcomax ZCN-1523H-2-8/5-16 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-
-#define ZCN_1523H_GPIO_BTN_RESET 0
-#define ZCN_1523H_GPIO_LED_INIT 11
-#define ZCN_1523H_GPIO_LED_LAN1 17
-
-#define ZCN_1523H_2_GPIO_LED_WEAK 13
-#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
-#define ZCN_1523H_2_GPIO_LED_STRONG 15
-
-#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1
-#define ZCN_1523H_5_GPIO_LED_LAN2 13
-#define ZCN_1523H_5_GPIO_LED_WEAK 14
-#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
-#define ZCN_1523H_5_GPIO_LED_STRONG 16
-
-#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition zcn_1523h_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x040000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "rootfs",
- .offset = 0x050000,
- .size = 0x610000,
- }, {
- .name = "kernel",
- .offset = 0x660000,
- .size = 0x170000,
- }, {
- .name = "configure",
- .offset = 0x7d0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "mfg",
- .offset = 0x7e0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "eeprom",
- .offset = 0x7f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x050000,
- .size = 0x780000,
- }
-};
-
-static struct flash_platform_data zcn_1523h_flash_data = {
- .parts = zcn_1523h_partitions,
- .nr_parts = ARRAY_SIZE(zcn_1523h_partitions),
-};
-
-static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ZCN_1523H_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
- {
- .name = "zcn-1523h:amber:init",
- .gpio = ZCN_1523H_GPIO_LED_INIT,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:lan1",
- .gpio = ZCN_1523H_GPIO_LED_LAN1,
- .active_low = 1,
- }
-};
-
-static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
- {
- .name = "zcn-1523h:red:weak",
- .gpio = ZCN_1523H_2_GPIO_LED_WEAK,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:amber:medium",
- .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:strong",
- .gpio = ZCN_1523H_2_GPIO_LED_STRONG,
- .active_low = 1,
- }
-};
-
-static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
- {
- .name = "zcn-1523h:red:weak",
- .gpio = ZCN_1523H_5_GPIO_LED_WEAK,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:amber:medium",
- .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:strong",
- .gpio = ZCN_1523H_5_GPIO_LED_STRONG,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:lan2",
- .gpio = ZCN_1523H_5_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:amber:unknown",
- .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN,
- }
-};
-
-static void __init zcn_1523h_generic_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(&zcn_1523h_flash_data);
-
- ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
- zcn_1523h_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(zcn_1523h_gpio_keys),
- zcn_1523h_gpio_keys);
-
- ap91_pci_init(ee, mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN1 port */
- ath79_register_eth(0);
-}
-
-static void __init zcn_1523h_2_setup(void)
-{
- zcn_1523h_generic_setup();
- ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
-
- ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
- zcn_1523h_2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
- zcn_1523h_2_setup);
-
-static void __init zcn_1523h_5_setup(void)
-{
- zcn_1523h_generic_setup();
- ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
-
- ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
- zcn_1523h_5_leds_gpio);
-
- /* LAN2 port */
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
- zcn_1523h_5_setup);
+++ /dev/null
-/*
- * Atheros AR71xx minimal nvram support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include "nvram.h"
-
-char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
-{
- unsigned len = strlen(name);
- char *cur, *last;
-
- if (buf_len == 0 || len == 0)
- return NULL;
-
- if (buf_len < len)
- return NULL;
-
- if (len == 1)
- return memchr(buf, (int) *name, buf_len);
-
- last = (char *) buf + buf_len - len;
- for (cur = (char *) buf; cur <= last; cur++)
- if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
- return cur + len;
-
- return NULL;
-}
-
-int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
- const char *name, char *mac)
-{
- char *buf;
- char *mac_str;
- int ret;
- int t;
-
- buf = vmalloc(nvram_len);
- if (!buf)
- return -ENOMEM;
-
- memcpy(buf, nvram, nvram_len);
- buf[nvram_len - 1] = '\0';
-
- mac_str = ath79_nvram_find_var(name, buf, nvram_len);
- if (!mac_str) {
- ret = -EINVAL;
- goto free;
- }
-
- t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
-
- if (t != 6) {
- ret = -EINVAL;
- goto free;
- }
-
- ret = 0;
-
-free:
- vfree(buf);
- return ret;
-}
+++ /dev/null
-/*
- * Atheros AR71xx minimal nvram support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_NVRAM_H
-#define _ATH79_NVRAM_H
-
-char *ath79_nvram_find_var(const char *name, const char *buf,
- unsigned buf_len);
-int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
- const char *name, char *mac);
-
-#endif /* _ATH79_NVRAM_H */
+++ /dev/null
-/*
- * Atheros AP94 reference board PCI initialization
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/pci.h>
-
-struct ath9k_fixup {
- u16 *cal_data;
- unsigned slot;
-};
-
-static int ath9k_num_fixups;
-static struct ath9k_fixup ath9k_fixups[2];
-
-static void ath9k_pci_fixup(struct pci_dev *dev)
-{
- void __iomem *mem;
- u16 *cal_data = NULL;
- u16 cmd;
- u32 bar0;
- u32 val;
- unsigned i;
-
- for (i = 0; i < ath9k_num_fixups; i++) {
- if (ath9k_fixups[i].cal_data == NULL)
- continue;
-
- if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
- continue;
-
- cal_data = ath9k_fixups[i].cal_data;
- break;
- }
-
- if (cal_data == NULL)
- return;
-
- if (*cal_data != 0xa55a) {
- pr_err("pci %s: invalid calibration data\n", pci_name(dev));
- return;
- }
-
- pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-
- mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
- if (!mem) {
- pr_err("pci %s: ioremap error\n", pci_name(dev));
- return;
- }
-
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7161:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
- AR71XX_PCI_MEM_BASE);
- break;
- case ATH79_SOC_AR7240:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
- break;
-
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR7242:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
- break;
-
- default:
- BUG();
- }
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- /* set pointer to first reg address */
- cal_data += 3;
- while (*cal_data != 0xffff) {
- u32 reg;
- reg = *cal_data++;
- val = *cal_data++;
- val |= (*cal_data++) << 16;
-
- __raw_writel(val, mem + reg);
- udelay(100);
- }
-
- pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
- dev->vendor = val & 0xffff;
- dev->device = (val >> 16) & 0xffff;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
- dev->revision = val & 0xff;
- dev->class = val >> 8; /* upper 3 bytes */
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-
- iounmap(mem);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-
-void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
-{
- if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- return;
-
- ath9k_fixups[ath9k_num_fixups].slot = slot;
- ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
- ath9k_num_fixups++;
-}
+++ /dev/null
-#ifndef _PCI_ATH9K_FIXUP
-#define _PCI_ATH9K_FIXUP
-
-void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
-
-#endif /* _PCI_ATH9K_FIXUP */
+++ /dev/null
-/*
- * Atheros AR71xx SoC specific platform data definitions
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PLATFORM_H
-#define __ASM_MACH_ATH79_PLATFORM_H
-
-#include <linux/if_ether.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-#include <linux/spi/spi.h>
-
-struct ag71xx_switch_platform_data {
- u8 phy4_mii_en:1;
-};
-
-struct ag71xx_platform_data {
- phy_interface_t phy_if_mode;
- u32 phy_mask;
- int speed;
- int duplex;
- u32 reset_bit;
- u8 mac_addr[ETH_ALEN];
- struct device *mii_bus_dev;
-
- u8 has_gbit:1;
- u8 is_ar91xx:1;
- u8 is_ar7240:1;
- u8 is_ar724x:1;
- u8 has_ar8216:1;
-
- struct ag71xx_switch_platform_data *switch_data;
-
- void (*ddr_flush)(void);
- void (*set_speed)(int speed);
-
- u32 fifo_cfg1;
- u32 fifo_cfg2;
- u32 fifo_cfg3;
-};
-
-struct ag71xx_mdio_platform_data {
- u32 phy_mask;
- int is_ar7240;
-};
-
-#endif /* __ASM_MACH_ATH79_PLATFORM_H */
+++ /dev/null
-/*
- * MikroTik RouterBOARD 750 definitions
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#ifndef _MACH_RB750_H
-#define _MACH_RB750_H
-
-#include <linux/bitops.h>
-
-#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */
-#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */
-#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */
-#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */
-#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */
-#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */
-#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */
-#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */
-#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */
-#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */
-#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */
-#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */
-#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */
-#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */
-#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */
-
-#define RB750_GPIO_BTN_RESET 1
-#define RB750_GPIO_SPI_CS0 2
-#define RB750_GPIO_LED_ACT 12
-#define RB750_GPIO_LED_PORT1 13
-#define RB750_GPIO_LED_PORT2 14
-#define RB750_GPIO_LED_PORT3 15
-#define RB750_GPIO_LED_PORT4 16
-#define RB750_GPIO_LED_PORT5 17
-
-#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT)
-#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1)
-#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2)
-#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3)
-#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4)
-#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5)
-
-#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE)
-
-#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
- RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
-
-struct rb750_led_data {
- char *name;
- char *default_trigger;
- u32 mask;
- int active_low;
-};
-
-struct rb750_led_platform_data {
- int num_leds;
- struct rb750_led_data *leds;
-};
-
-int rb750_latch_change(u32 mask_clr, u32 mask_set);
-void rb750_nand_pins_enable(void);
-void rb750_nand_pins_disable(void);
-
-#endif /* _MACH_RB750_H */
\ No newline at end of file
+++ /dev/null
-/*
- * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define CPLD_GPIO_nLED1 0
-#define CPLD_GPIO_nLED2 1
-#define CPLD_GPIO_nLED3 2
-#define CPLD_GPIO_nLED4 3
-#define CPLD_GPIO_FAN 4
-#define CPLD_GPIO_ALE 5
-#define CPLD_GPIO_CLE 6
-#define CPLD_GPIO_nCE 7
-#define CPLD_GPIO_nLED5 8
-
-#define CPLD_NUM_GPIOS 9
-
-#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
-#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
-#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
-#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
-#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
-#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
-#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
-#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
-#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
-
-struct rb4xx_cpld_platform_data {
- unsigned gpio_base;
-};
-
-extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
-extern int rb4xx_cpld_read(unsigned char *rx_buf,
- const unsigned char *verify_buf,
- unsigned cnt);
-extern int rb4xx_cpld_read_from(unsigned addr,
- unsigned char *rx_buf,
- const unsigned char *verify_buf,
- unsigned cnt);
-extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
+++ /dev/null
-config AG71XX
- tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
- depends on ATH79
- select PHYLIB
- help
- If you wish to compile a kernel for AR7XXX/91XXX and enable
- ethernet support, then you should always answer Y to this.
-
-if AG71XX
-
-config AG71XX_DEBUG
- bool "Atheros AR71xx built-in ethernet driver debugging"
- default n
- help
- Atheros AR71xx built-in ethernet driver debugging messages.
-
-config AG71XX_DEBUG_FS
- bool "Atheros AR71xx built-in ethernet driver debugfs support"
- depends on DEBUG_FS
- default n
- help
- Say Y, if you need access to various statistics provided by
- the ag71xx driver.
-
-config AG71XX_AR8216_SUPPORT
- bool "special support for the Atheros AR8216 switch"
- default n
- default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU
- help
- Say 'y' here if you want to enable special support for the
- Atheros AR8216 switch found on some boards.
-
-endif
+++ /dev/null
-#
-# Makefile for the Atheros AR71xx built-in ethernet macs
-#
-
-ag71xx-y += ag71xx_main.o
-ag71xx-y += ag71xx_ethtool.o
-ag71xx-y += ag71xx_phy.o
-ag71xx-y += ag71xx_mdio.o
-ag71xx-y += ag71xx_ar7240.o
-
-ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o
-ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o
-
-obj-$(CONFIG_AG71XX) += ag71xx.o
-
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __AG71XX_H
-#define __AG71XX_H
-
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/etherdevice.h>
-#include <linux/if_vlan.h>
-#include <linux/phy.h>
-#include <linux/skbuff.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-
-#include <linux/bitops.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-#define AG71XX_DRV_NAME "ag71xx"
-#define AG71XX_DRV_VERSION "0.5.35"
-
-#define AG71XX_NAPI_WEIGHT 64
-#define AG71XX_OOM_REFILL (1 + HZ/10)
-
-#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
-#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
-#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
-
-#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
-#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
-
-#define AG71XX_TX_MTU_LEN 1540
-#define AG71XX_RX_PKT_RESERVE 64
-#define AG71XX_RX_PKT_SIZE \
- (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
-
-#define AG71XX_TX_RING_SIZE_DEFAULT 64
-#define AG71XX_RX_RING_SIZE_DEFAULT 128
-
-#define AG71XX_TX_RING_SIZE_MAX 256
-#define AG71XX_RX_RING_SIZE_MAX 256
-
-#ifdef CONFIG_AG71XX_DEBUG
-#define DBG(fmt, args...) pr_debug(fmt, ## args)
-#else
-#define DBG(fmt, args...) do {} while (0)
-#endif
-
-#define ag71xx_assert(_cond) \
-do { \
- if (_cond) \
- break; \
- printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
- BUG(); \
-} while (0)
-
-struct ag71xx_desc {
- u32 data;
- u32 ctrl;
-#define DESC_EMPTY BIT(31)
-#define DESC_MORE BIT(24)
-#define DESC_PKTLEN_M 0xfff
- u32 next;
- u32 pad;
-} __attribute__((aligned(4)));
-
-struct ag71xx_buf {
- struct sk_buff *skb;
- struct ag71xx_desc *desc;
- dma_addr_t dma_addr;
- unsigned long timestamp;
-};
-
-struct ag71xx_ring {
- struct ag71xx_buf *buf;
- u8 *descs_cpu;
- dma_addr_t descs_dma;
- unsigned int desc_size;
- unsigned int curr;
- unsigned int dirty;
- unsigned int size;
-};
-
-struct ag71xx_mdio {
- struct mii_bus *mii_bus;
- int mii_irq[PHY_MAX_ADDR];
- void __iomem *mdio_base;
- struct ag71xx_mdio_platform_data *pdata;
-};
-
-struct ag71xx_int_stats {
- unsigned long rx_pr;
- unsigned long rx_be;
- unsigned long rx_of;
- unsigned long tx_ps;
- unsigned long tx_be;
- unsigned long tx_ur;
- unsigned long total;
-};
-
-struct ag71xx_napi_stats {
- unsigned long napi_calls;
- unsigned long rx_count;
- unsigned long rx_packets;
- unsigned long rx_packets_max;
- unsigned long tx_count;
- unsigned long tx_packets;
- unsigned long tx_packets_max;
-
- unsigned long rx[AG71XX_NAPI_WEIGHT + 1];
- unsigned long tx[AG71XX_NAPI_WEIGHT + 1];
-};
-
-struct ag71xx_debug {
- struct dentry *debugfs_dir;
-
- struct ag71xx_int_stats int_stats;
- struct ag71xx_napi_stats napi_stats;
-};
-
-struct ag71xx {
- void __iomem *mac_base;
-
- spinlock_t lock;
- struct platform_device *pdev;
- struct net_device *dev;
- struct napi_struct napi;
- u32 msg_enable;
-
- struct ag71xx_desc *stop_desc;
- dma_addr_t stop_desc_dma;
-
- struct ag71xx_ring rx_ring;
- struct ag71xx_ring tx_ring;
-
- struct mii_bus *mii_bus;
- struct phy_device *phy_dev;
- void *phy_priv;
-
- unsigned int link;
- unsigned int speed;
- int duplex;
-
- struct work_struct restart_work;
- struct delayed_work link_work;
- struct timer_list oom_timer;
-
-#ifdef CONFIG_AG71XX_DEBUG_FS
- struct ag71xx_debug debug;
-#endif
-};
-
-extern struct ethtool_ops ag71xx_ethtool_ops;
-void ag71xx_link_adjust(struct ag71xx *ag);
-
-int ag71xx_mdio_driver_init(void) __init;
-void ag71xx_mdio_driver_exit(void);
-
-int ag71xx_phy_connect(struct ag71xx *ag);
-void ag71xx_phy_disconnect(struct ag71xx *ag);
-void ag71xx_phy_start(struct ag71xx *ag);
-void ag71xx_phy_stop(struct ag71xx *ag);
-
-static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
-{
- return ag->pdev->dev.platform_data;
-}
-
-static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
-{
- return (desc->ctrl & DESC_EMPTY) != 0;
-}
-
-static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
-{
- return desc->ctrl & DESC_PKTLEN_M;
-}
-
-/* Register offsets */
-#define AG71XX_REG_MAC_CFG1 0x0000
-#define AG71XX_REG_MAC_CFG2 0x0004
-#define AG71XX_REG_MAC_IPG 0x0008
-#define AG71XX_REG_MAC_HDX 0x000c
-#define AG71XX_REG_MAC_MFL 0x0010
-#define AG71XX_REG_MII_CFG 0x0020
-#define AG71XX_REG_MII_CMD 0x0024
-#define AG71XX_REG_MII_ADDR 0x0028
-#define AG71XX_REG_MII_CTRL 0x002c
-#define AG71XX_REG_MII_STATUS 0x0030
-#define AG71XX_REG_MII_IND 0x0034
-#define AG71XX_REG_MAC_IFCTL 0x0038
-#define AG71XX_REG_MAC_ADDR1 0x0040
-#define AG71XX_REG_MAC_ADDR2 0x0044
-#define AG71XX_REG_FIFO_CFG0 0x0048
-#define AG71XX_REG_FIFO_CFG1 0x004c
-#define AG71XX_REG_FIFO_CFG2 0x0050
-#define AG71XX_REG_FIFO_CFG3 0x0054
-#define AG71XX_REG_FIFO_CFG4 0x0058
-#define AG71XX_REG_FIFO_CFG5 0x005c
-#define AG71XX_REG_FIFO_RAM0 0x0060
-#define AG71XX_REG_FIFO_RAM1 0x0064
-#define AG71XX_REG_FIFO_RAM2 0x0068
-#define AG71XX_REG_FIFO_RAM3 0x006c
-#define AG71XX_REG_FIFO_RAM4 0x0070
-#define AG71XX_REG_FIFO_RAM5 0x0074
-#define AG71XX_REG_FIFO_RAM6 0x0078
-#define AG71XX_REG_FIFO_RAM7 0x007c
-
-#define AG71XX_REG_TX_CTRL 0x0180
-#define AG71XX_REG_TX_DESC 0x0184
-#define AG71XX_REG_TX_STATUS 0x0188
-#define AG71XX_REG_RX_CTRL 0x018c
-#define AG71XX_REG_RX_DESC 0x0190
-#define AG71XX_REG_RX_STATUS 0x0194
-#define AG71XX_REG_INT_ENABLE 0x0198
-#define AG71XX_REG_INT_STATUS 0x019c
-
-#define AG71XX_REG_FIFO_DEPTH 0x01a8
-#define AG71XX_REG_RX_SM 0x01b0
-#define AG71XX_REG_TX_SM 0x01b4
-
-#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
-#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
-#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
-#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
-#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
-#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
-#define MAC_CFG1_LB BIT(8) /* Loopback mode */
-#define MAC_CFG1_SR BIT(31) /* Soft Reset */
-
-#define MAC_CFG2_FDX BIT(0)
-#define MAC_CFG2_CRC_EN BIT(1)
-#define MAC_CFG2_PAD_CRC_EN BIT(2)
-#define MAC_CFG2_LEN_CHECK BIT(4)
-#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
-#define MAC_CFG2_IF_1000 BIT(9)
-#define MAC_CFG2_IF_10_100 BIT(8)
-
-#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
-#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
-#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
-#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
-#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
-#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
- | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
-
-#define FIFO_CFG0_ENABLE_SHIFT 8
-
-#define FIFO_CFG4_DE BIT(0) /* Drop Event */
-#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG4_FC BIT(2) /* False Carrier */
-#define FIFO_CFG4_CE BIT(3) /* Code Error */
-#define FIFO_CFG4_CR BIT(4) /* CRC error */
-#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
-#define FIFO_CFG4_LO BIT(6) /* Length out of range */
-#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
-#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
-#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
-#define FIFO_CFG4_DR BIT(10) /* Dribble */
-#define FIFO_CFG4_LE BIT(11) /* Long Event */
-#define FIFO_CFG4_CF BIT(12) /* Control Frame */
-#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
-#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
-#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
-#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
-#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
-
-#define FIFO_CFG5_DE BIT(0) /* Drop Event */
-#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG5_FC BIT(2) /* False Carrier */
-#define FIFO_CFG5_CE BIT(3) /* Code Error */
-#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
-#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
-#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
-#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
-#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
-#define FIFO_CFG5_DR BIT(9) /* Dribble */
-#define FIFO_CFG5_CF BIT(10) /* Control Frame */
-#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
-#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
-#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
-#define FIFO_CFG5_LE BIT(14) /* Long Event */
-#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
-#define FIFO_CFG5_16 BIT(16) /* unknown */
-#define FIFO_CFG5_17 BIT(17) /* unknown */
-#define FIFO_CFG5_SF BIT(18) /* Short Frame */
-#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
-
-#define AG71XX_INT_TX_PS BIT(0)
-#define AG71XX_INT_TX_UR BIT(1)
-#define AG71XX_INT_TX_BE BIT(3)
-#define AG71XX_INT_RX_PR BIT(4)
-#define AG71XX_INT_RX_OF BIT(6)
-#define AG71XX_INT_RX_BE BIT(7)
-
-#define MAC_IFCTL_SPEED BIT(16)
-
-#define MII_CFG_CLK_DIV_4 0
-#define MII_CFG_CLK_DIV_6 2
-#define MII_CFG_CLK_DIV_8 3
-#define MII_CFG_CLK_DIV_10 4
-#define MII_CFG_CLK_DIV_14 5
-#define MII_CFG_CLK_DIV_20 6
-#define MII_CFG_CLK_DIV_28 7
-#define MII_CFG_RESET BIT(31)
-
-#define MII_CMD_WRITE 0x0
-#define MII_CMD_READ 0x1
-#define MII_ADDR_SHIFT 8
-#define MII_IND_BUSY BIT(0)
-#define MII_IND_INVALID BIT(2)
-
-#define TX_CTRL_TXE BIT(0) /* Tx Enable */
-
-#define TX_STATUS_PS BIT(0) /* Packet Sent */
-#define TX_STATUS_UR BIT(1) /* Tx Underrun */
-#define TX_STATUS_BE BIT(3) /* Bus Error */
-
-#define RX_CTRL_RXE BIT(0) /* Rx Enable */
-
-#define RX_STATUS_PR BIT(0) /* Packet Received */
-#define RX_STATUS_OF BIT(2) /* Rx Overflow */
-#define RX_STATUS_BE BIT(3) /* Bus Error */
-
-static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
-{
- switch (reg) {
- case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
- case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
- case AG71XX_REG_MII_CFG:
- break;
-
- default:
- BUG();
- }
-}
-
-static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
-{
- ag71xx_check_reg_offset(ag, reg);
-
- __raw_writel(value, ag->mac_base + reg);
- /* flush write */
- (void) __raw_readl(ag->mac_base + reg);
-}
-
-static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
-{
- ag71xx_check_reg_offset(ag, reg);
-
- return __raw_readl(ag->mac_base + reg);
-}
-
-static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- void __iomem *r;
-
- ag71xx_check_reg_offset(ag, reg);
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) | mask, r);
- /* flush write */
- (void)__raw_readl(r);
-}
-
-static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- void __iomem *r;
-
- ag71xx_check_reg_offset(ag, reg);
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) & ~mask, r);
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-#ifdef CONFIG_AG71XX_AR8216_SUPPORT
-void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
-int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
- int pktlen);
-static inline int ag71xx_has_ar8216(struct ag71xx *ag)
-{
- return ag71xx_get_pdata(ag)->has_ar8216;
-}
-#else
-static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
- struct sk_buff *skb)
-{
-}
-
-static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
- struct sk_buff *skb,
- int pktlen)
-{
- return 0;
-}
-static inline int ag71xx_has_ar8216(struct ag71xx *ag)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_AG71XX_DEBUG_FS
-int ag71xx_debugfs_root_init(void);
-void ag71xx_debugfs_root_exit(void);
-int ag71xx_debugfs_init(struct ag71xx *ag);
-void ag71xx_debugfs_exit(struct ag71xx *ag);
-void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
-void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
-#else
-static inline int ag71xx_debugfs_root_init(void) { return 0; }
-static inline void ag71xx_debugfs_root_exit(void) {}
-static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
-static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
-static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
- u32 status) {}
-static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
- int rx, int tx) {}
-#endif /* CONFIG_AG71XX_DEBUG_FS */
-
-void ag71xx_ar7240_start(struct ag71xx *ag);
-void ag71xx_ar7240_stop(struct ag71xx *ag);
-int ag71xx_ar7240_init(struct ag71xx *ag);
-void ag71xx_ar7240_cleanup(struct ag71xx *ag);
-
-int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg);
-void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val);
-
-u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr);
-int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr, u16 reg_val);
-
-#endif /* _AG71XX_H */
+++ /dev/null
-/*
- * Driver for the built-in ethernet switch of the Atheros AR7240 SoC
- * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2010 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/etherdevice.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <linux/mii.h>
-#include <linux/bitops.h>
-#include <linux/switch.h>
-#include "ag71xx.h"
-
-#define BITM(_count) (BIT(_count) - 1)
-#define BITS(_shift, _count) (BITM(_count) << _shift)
-
-#define AR7240_REG_MASK_CTRL 0x00
-#define AR7240_MASK_CTRL_REVISION_M BITM(8)
-#define AR7240_MASK_CTRL_VERSION_M BITM(8)
-#define AR7240_MASK_CTRL_VERSION_S 8
-#define AR7240_MASK_CTRL_VERSION_AR7240 0x01
-#define AR7240_MASK_CTRL_VERSION_AR934X 0x02
-#define AR7240_MASK_CTRL_SOFT_RESET BIT(31)
-
-#define AR7240_REG_MAC_ADDR0 0x20
-#define AR7240_REG_MAC_ADDR1 0x24
-
-#define AR7240_REG_FLOOD_MASK 0x2c
-#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26)
-
-#define AR7240_REG_GLOBAL_CTRL 0x30
-#define AR7240_GLOBAL_CTRL_MTU_M BITM(12)
-
-#define AR7240_REG_VTU 0x0040
-#define AR7240_VTU_OP BITM(3)
-#define AR7240_VTU_OP_NOOP 0x0
-#define AR7240_VTU_OP_FLUSH 0x1
-#define AR7240_VTU_OP_LOAD 0x2
-#define AR7240_VTU_OP_PURGE 0x3
-#define AR7240_VTU_OP_REMOVE_PORT 0x4
-#define AR7240_VTU_ACTIVE BIT(3)
-#define AR7240_VTU_FULL BIT(4)
-#define AR7240_VTU_PORT BITS(8, 4)
-#define AR7240_VTU_PORT_S 8
-#define AR7240_VTU_VID BITS(16, 12)
-#define AR7240_VTU_VID_S 16
-#define AR7240_VTU_PRIO BITS(28, 3)
-#define AR7240_VTU_PRIO_S 28
-#define AR7240_VTU_PRIO_EN BIT(31)
-
-#define AR7240_REG_VTU_DATA 0x0044
-#define AR7240_VTUDATA_MEMBER BITS(0, 10)
-#define AR7240_VTUDATA_VALID BIT(11)
-
-#define AR7240_REG_ATU 0x50
-#define AR7240_ATU_FLUSH_ALL 0x1
-
-#define AR7240_REG_AT_CTRL 0x5c
-#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15)
-#define AR7240_AT_CTRL_AGE_EN BIT(17)
-#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18)
-#define AR7240_AT_CTRL_RESERVED BIT(19)
-#define AR7240_AT_CTRL_ARP_EN BIT(20)
-
-#define AR7240_REG_TAG_PRIORITY 0x70
-
-#define AR7240_REG_SERVICE_TAG 0x74
-#define AR7240_SERVICE_TAG_M BITM(16)
-
-#define AR7240_REG_CPU_PORT 0x78
-#define AR7240_MIRROR_PORT_S 4
-#define AR7240_CPU_PORT_EN BIT(8)
-
-#define AR7240_REG_MIB_FUNCTION0 0x80
-#define AR7240_MIB_TIMER_M BITM(16)
-#define AR7240_MIB_AT_HALF_EN BIT(16)
-#define AR7240_MIB_BUSY BIT(17)
-#define AR7240_MIB_FUNC_S 24
-#define AR7240_MIB_FUNC_NO_OP 0x0
-#define AR7240_MIB_FUNC_FLUSH 0x1
-#define AR7240_MIB_FUNC_CAPTURE 0x3
-
-#define AR7240_REG_MDIO_CTRL 0x98
-#define AR7240_MDIO_CTRL_DATA_M BITM(16)
-#define AR7240_MDIO_CTRL_REG_ADDR_S 16
-#define AR7240_MDIO_CTRL_PHY_ADDR_S 21
-#define AR7240_MDIO_CTRL_CMD_WRITE 0
-#define AR7240_MDIO_CTRL_CMD_READ BIT(27)
-#define AR7240_MDIO_CTRL_MASTER_EN BIT(30)
-#define AR7240_MDIO_CTRL_BUSY BIT(31)
-
-#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
-
-#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00)
-#define AR7240_PORT_STATUS_SPEED_S 0
-#define AR7240_PORT_STATUS_SPEED_M BITM(2)
-#define AR7240_PORT_STATUS_SPEED_10 0
-#define AR7240_PORT_STATUS_SPEED_100 1
-#define AR7240_PORT_STATUS_SPEED_1000 2
-#define AR7240_PORT_STATUS_TXMAC BIT(2)
-#define AR7240_PORT_STATUS_RXMAC BIT(3)
-#define AR7240_PORT_STATUS_TXFLOW BIT(4)
-#define AR7240_PORT_STATUS_RXFLOW BIT(5)
-#define AR7240_PORT_STATUS_DUPLEX BIT(6)
-#define AR7240_PORT_STATUS_LINK_UP BIT(8)
-#define AR7240_PORT_STATUS_LINK_AUTO BIT(9)
-#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10)
-
-#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04)
-#define AR7240_PORT_CTRL_STATE_M BITM(3)
-#define AR7240_PORT_CTRL_STATE_DISABLED 0
-#define AR7240_PORT_CTRL_STATE_BLOCK 1
-#define AR7240_PORT_CTRL_STATE_LISTEN 2
-#define AR7240_PORT_CTRL_STATE_LEARN 3
-#define AR7240_PORT_CTRL_STATE_FORWARD 4
-#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7)
-#define AR7240_PORT_CTRL_VLAN_MODE_S 8
-#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0
-#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
-#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2
-#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
-#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10)
-#define AR7240_PORT_CTRL_HEADER BIT(11)
-#define AR7240_PORT_CTRL_MAC_LOOP BIT(12)
-#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13)
-#define AR7240_PORT_CTRL_LEARN BIT(14)
-#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15)
-#define AR7240_PORT_CTRL_MIRROR_TX BIT(16)
-#define AR7240_PORT_CTRL_MIRROR_RX BIT(17)
-
-#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08)
-
-#define AR7240_PORT_VLAN_DEFAULT_ID_S 0
-#define AR7240_PORT_VLAN_DEST_PORTS_S 16
-#define AR7240_PORT_VLAN_MODE_S 30
-#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0
-#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1
-#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2
-#define AR7240_PORT_VLAN_MODE_SECURE 3
-
-
-#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100)
-
-#define AR7240_STATS_RXBROAD 0x00
-#define AR7240_STATS_RXPAUSE 0x04
-#define AR7240_STATS_RXMULTI 0x08
-#define AR7240_STATS_RXFCSERR 0x0c
-#define AR7240_STATS_RXALIGNERR 0x10
-#define AR7240_STATS_RXRUNT 0x14
-#define AR7240_STATS_RXFRAGMENT 0x18
-#define AR7240_STATS_RX64BYTE 0x1c
-#define AR7240_STATS_RX128BYTE 0x20
-#define AR7240_STATS_RX256BYTE 0x24
-#define AR7240_STATS_RX512BYTE 0x28
-#define AR7240_STATS_RX1024BYTE 0x2c
-#define AR7240_STATS_RX1518BYTE 0x30
-#define AR7240_STATS_RXMAXBYTE 0x34
-#define AR7240_STATS_RXTOOLONG 0x38
-#define AR7240_STATS_RXGOODBYTE 0x3c
-#define AR7240_STATS_RXBADBYTE 0x44
-#define AR7240_STATS_RXOVERFLOW 0x4c
-#define AR7240_STATS_FILTERED 0x50
-#define AR7240_STATS_TXBROAD 0x54
-#define AR7240_STATS_TXPAUSE 0x58
-#define AR7240_STATS_TXMULTI 0x5c
-#define AR7240_STATS_TXUNDERRUN 0x60
-#define AR7240_STATS_TX64BYTE 0x64
-#define AR7240_STATS_TX128BYTE 0x68
-#define AR7240_STATS_TX256BYTE 0x6c
-#define AR7240_STATS_TX512BYTE 0x70
-#define AR7240_STATS_TX1024BYTE 0x74
-#define AR7240_STATS_TX1518BYTE 0x78
-#define AR7240_STATS_TXMAXBYTE 0x7c
-#define AR7240_STATS_TXOVERSIZE 0x80
-#define AR7240_STATS_TXBYTE 0x84
-#define AR7240_STATS_TXCOLLISION 0x8c
-#define AR7240_STATS_TXABORTCOL 0x90
-#define AR7240_STATS_TXMULTICOL 0x94
-#define AR7240_STATS_TXSINGLECOL 0x98
-#define AR7240_STATS_TXEXCDEFER 0x9c
-#define AR7240_STATS_TXDEFER 0xa0
-#define AR7240_STATS_TXLATECOL 0xa4
-
-#define AR7240_PORT_CPU 0
-#define AR7240_NUM_PORTS 6
-#define AR7240_NUM_PHYS 5
-
-#define AR7240_PHY_ID1 0x004d
-#define AR7240_PHY_ID2 0xd041
-
-#define AR934X_PHY_ID1 0x004d
-#define AR934X_PHY_ID2 0xd042
-
-#define AR7240_MAX_VLANS 16
-
-#define AR934X_REG_OPER_MODE0 0x04
-#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6)
-#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10)
-
-#define AR934X_REG_OPER_MODE1 0x08
-#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28)
-
-#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
-
-#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08)
-#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0
-#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12)
-#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13)
-#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14)
-#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15)
-#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16
-#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28)
-#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29
-
-#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c)
-#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16
-#define AR934X_PORT_VLAN2_8021Q_MODE_S 30
-#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0
-#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1
-#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2
-#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3
-
-#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
-
-struct ar7240sw_port_stat {
- unsigned long rx_broadcast;
- unsigned long rx_pause;
- unsigned long rx_multicast;
- unsigned long rx_fcs_error;
- unsigned long rx_align_error;
- unsigned long rx_runt;
- unsigned long rx_fragments;
- unsigned long rx_64byte;
- unsigned long rx_128byte;
- unsigned long rx_256byte;
- unsigned long rx_512byte;
- unsigned long rx_1024byte;
- unsigned long rx_1518byte;
- unsigned long rx_maxbyte;
- unsigned long rx_toolong;
- unsigned long rx_good_byte;
- unsigned long rx_bad_byte;
- unsigned long rx_overflow;
- unsigned long filtered;
-
- unsigned long tx_broadcast;
- unsigned long tx_pause;
- unsigned long tx_multicast;
- unsigned long tx_underrun;
- unsigned long tx_64byte;
- unsigned long tx_128byte;
- unsigned long tx_256byte;
- unsigned long tx_512byte;
- unsigned long tx_1024byte;
- unsigned long tx_1518byte;
- unsigned long tx_maxbyte;
- unsigned long tx_oversize;
- unsigned long tx_byte;
- unsigned long tx_collision;
- unsigned long tx_abortcol;
- unsigned long tx_multicol;
- unsigned long tx_singlecol;
- unsigned long tx_excdefer;
- unsigned long tx_defer;
- unsigned long tx_xlatecol;
-};
-
-struct ar7240sw {
- struct mii_bus *mii_bus;
- struct ag71xx_switch_platform_data *swdata;
- struct switch_dev swdev;
- int num_ports;
- u8 ver;
- bool vlan;
- u16 vlan_id[AR7240_MAX_VLANS];
- u8 vlan_table[AR7240_MAX_VLANS];
- u8 vlan_tagged;
- u16 pvid[AR7240_NUM_PORTS];
- char buf[80];
-
- rwlock_t stats_lock;
- struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
-};
-
-struct ar7240sw_hw_stat {
- char string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int reg;
-};
-
-static DEFINE_MUTEX(reg_mutex);
-
-static inline int sw_is_ar7240(struct ar7240sw *as)
-{
- return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
-}
-
-static inline int sw_is_ar934x(struct ar7240sw *as)
-{
- return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
-}
-
-static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
-{
- return BIT(port);
-}
-
-static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
-{
- return BIT(as->swdev.ports) - 1;
-}
-
-static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
-{
- return ar7240sw_port_mask_all(as) & ~BIT(port);
-}
-
-static inline u16 mk_phy_addr(u32 reg)
-{
- return 0x17 & ((reg >> 4) | 0x10);
-}
-
-static inline u16 mk_phy_reg(u32 reg)
-{
- return (reg << 1) & 0x1e;
-}
-
-static inline u16 mk_high_addr(u32 reg)
-{
- return (reg >> 7) & 0x1ff;
-}
-
-static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
-{
- unsigned long flags;
- u16 phy_addr;
- u16 phy_reg;
- u32 hi, lo;
-
- reg = (reg & 0xfffffffc) >> 2;
- phy_addr = mk_phy_addr(reg);
- phy_reg = mk_phy_reg(reg);
-
- local_irq_save(flags);
- ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
- lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg);
- hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1);
- local_irq_restore(flags);
-
- return (hi << 16) | lo;
-}
-
-static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
-{
- unsigned long flags;
- u16 phy_addr;
- u16 phy_reg;
-
- reg = (reg & 0xfffffffc) >> 2;
- phy_addr = mk_phy_addr(reg);
- phy_reg = mk_phy_reg(reg);
-
- local_irq_save(flags);
- ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
- ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16));
- ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff));
- local_irq_restore(flags);
-}
-
-static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
-{
- u32 ret;
-
- mutex_lock(®_mutex);
- ret = __ar7240sw_reg_read(mii, reg_addr);
- mutex_unlock(®_mutex);
-
- return ret;
-}
-
-static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
-{
- mutex_lock(®_mutex);
- __ar7240sw_reg_write(mii, reg_addr, reg_val);
- mutex_unlock(®_mutex);
-}
-
-static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
-{
- u32 t;
-
- mutex_lock(®_mutex);
- t = __ar7240sw_reg_read(mii, reg);
- t &= ~mask;
- t |= val;
- __ar7240sw_reg_write(mii, reg, t);
- mutex_unlock(®_mutex);
-
- return t;
-}
-
-static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
-{
- u32 t;
-
- mutex_lock(®_mutex);
- t = __ar7240sw_reg_read(mii, reg);
- t |= val;
- __ar7240sw_reg_write(mii, reg, t);
- mutex_unlock(®_mutex);
-}
-
-static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int i;
-
- for (i = 0; i < timeout; i++) {
- u32 t;
-
- t = __ar7240sw_reg_read(mii, reg);
- if ((t & mask) == val)
- return 0;
-
- msleep(1);
- }
-
- return -ETIMEDOUT;
-}
-
-static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int ret;
-
- mutex_lock(®_mutex);
- ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
- mutex_unlock(®_mutex);
- return ret;
-}
-
-u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr)
-{
- u32 t, val = 0xffff;
- int err;
-
- if (phy_addr >= AR7240_NUM_PHYS)
- return 0xffff;
-
- mutex_lock(®_mutex);
- t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
- (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
- AR7240_MDIO_CTRL_MASTER_EN |
- AR7240_MDIO_CTRL_BUSY |
- AR7240_MDIO_CTRL_CMD_READ;
-
- __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
- err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
- AR7240_MDIO_CTRL_BUSY, 0, 5);
- if (!err)
- val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
- mutex_unlock(®_mutex);
-
- return val & AR7240_MDIO_CTRL_DATA_M;
-}
-
-int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr, u16 reg_val)
-{
- u32 t;
- int ret;
-
- if (phy_addr >= AR7240_NUM_PHYS)
- return -EINVAL;
-
- mutex_lock(®_mutex);
- t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
- (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
- AR7240_MDIO_CTRL_MASTER_EN |
- AR7240_MDIO_CTRL_BUSY |
- AR7240_MDIO_CTRL_CMD_WRITE |
- reg_val;
-
- __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
- ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
- AR7240_MDIO_CTRL_BUSY, 0, 5);
- mutex_unlock(®_mutex);
-
- return ret;
-}
-
-static int ar7240sw_capture_stats(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
- int port;
- int ret;
-
- write_lock(&as->stats_lock);
-
- /* Capture the hardware statistics for all ports */
- ar7240sw_reg_write(mii, AR7240_REG_MIB_FUNCTION0,
- (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
-
- /* Wait for the capturing to complete. */
- ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
- AR7240_MIB_BUSY, 0, 10);
-
- if (ret)
- goto unlock;
-
- for (port = 0; port < AR7240_NUM_PORTS; port++) {
- unsigned int base;
- struct ar7240sw_port_stat *stats;
-
- base = AR7240_REG_STATS_BASE(port);
- stats = &as->port_stats[port];
-
-#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
-
- stats->rx_good_byte += READ_STAT(RXGOODBYTE);
- stats->tx_byte += READ_STAT(TXBYTE);
-
-#undef READ_STAT
- }
-
- ret = 0;
-
-unlock:
- write_unlock(&as->stats_lock);
- return ret;
-}
-
-static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
-{
- ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_STATE_DISABLED);
-}
-
-static void ar7240sw_setup(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
-
- /* Enable CPU port, and disable mirror port */
- ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
- AR7240_CPU_PORT_EN |
- (15 << AR7240_MIRROR_PORT_S));
-
- /* Setup TAG priority mapping */
- ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
-
- /* Enable ARP frame acknowledge, aging, MAC replacing */
- ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
- AR7240_AT_CTRL_RESERVED |
- 0x2b /* 5 min age time */ |
- AR7240_AT_CTRL_AGE_EN |
- AR7240_AT_CTRL_ARP_EN |
- AR7240_AT_CTRL_LEARN_CHANGE);
-
- /* Enable Broadcast frames transmitted to the CPU */
- ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
- AR7240_FLOOD_MASK_BROAD_TO_CPU);
-
- /* setup MTU */
- ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M,
- 1536);
-
- /* setup Service TAG */
- ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
-}
-
-static int ar7240sw_reset(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
- int ret;
- int i;
-
- /* Set all ports to disabled state. */
- for (i = 0; i < AR7240_NUM_PORTS; i++)
- ar7240sw_disable_port(as, i);
-
- /* Wait for transmit queues to drain. */
- msleep(2);
-
- /* Reset the switch. */
- ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
- AR7240_MASK_CTRL_SOFT_RESET);
-
- ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
- AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
-
- ar7240sw_setup(as);
- return ret;
-}
-
-static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
-{
- struct mii_bus *mii = as->mii_bus;
- u32 ctrl;
- u32 vid, mode;
-
- ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
- AR7240_PORT_CTRL_SINGLE_VLAN;
-
- if (port == AR7240_PORT_CPU) {
- ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
- AR7240_PORT_STATUS_SPEED_1000 |
- AR7240_PORT_STATUS_TXFLOW |
- AR7240_PORT_STATUS_RXFLOW |
- AR7240_PORT_STATUS_TXMAC |
- AR7240_PORT_STATUS_RXMAC |
- AR7240_PORT_STATUS_DUPLEX);
- } else {
- ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
- AR7240_PORT_STATUS_LINK_AUTO);
- }
-
- /* Set the default VID for this port */
- if (as->vlan) {
- vid = as->vlan_id[as->pvid[port]];
- mode = AR7240_PORT_VLAN_MODE_SECURE;
- } else {
- vid = port;
- mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
- }
-
- if (as->vlan && (as->vlan_tagged & BIT(port))) {
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- } else {
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- }
-
- if (!portmask) {
- if (port == AR7240_PORT_CPU)
- portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
- else
- portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
- }
-
- /* allow the port to talk to all other ports, but exclude its
- * own ID to prevent frames from being reflected back to the
- * port that they came from */
- portmask &= ar7240sw_port_mask_but(as, port);
-
- ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
- if (sw_is_ar934x(as)) {
- u32 vlan1, vlan2;
-
- vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
- vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
- (mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
- ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
- ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
- } else {
- u32 vlan;
-
- vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
- (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
-
- ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
- }
-}
-
-static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
-{
- struct mii_bus *mii = as->mii_bus;
- u32 t;
-
- t = (addr[4] << 8) | addr[5];
- ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
-
- t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
- ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
-
- return 0;
-}
-
-static int
-ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- as->vlan_id[val->port_vlan] = val->value.i;
- return 0;
-}
-
-static int
-ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- val->value.i = as->vlan_id[val->port_vlan];
- return 0;
-}
-
-static int
-ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
-
- /* make sure no invalid PVIDs get set */
-
- if (vlan >= dev->vlans)
- return -EINVAL;
-
- as->pvid[port] = vlan;
- return 0;
-}
-
-static int
-ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- *vlan = as->pvid[port];
- return 0;
-}
-
-static int
-ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 ports = as->vlan_table[val->port_vlan];
- int i;
-
- val->len = 0;
- for (i = 0; i < as->swdev.ports; i++) {
- struct switch_port *p;
-
- if (!(ports & (1 << i)))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
- if (as->vlan_tagged & (1 << i))
- p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
- else
- p->flags = 0;
- }
- return 0;
-}
-
-static int
-ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 *vt = &as->vlan_table[val->port_vlan];
- int i, j;
-
- *vt = 0;
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
-
- if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
- as->vlan_tagged |= (1 << p->id);
- else {
- as->vlan_tagged &= ~(1 << p->id);
- as->pvid[p->id] = val->port_vlan;
-
- /* make sure that an untagged port does not
- * appear in other vlans */
- for (j = 0; j < AR7240_MAX_VLANS; j++) {
- if (j == val->port_vlan)
- continue;
- as->vlan_table[j] &= ~(1 << p->id);
- }
- }
-
- *vt |= 1 << p->id;
- }
- return 0;
-}
-
-static int
-ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- as->vlan = !!val->value.i;
- return 0;
-}
-
-static int
-ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- val->value.i = as->vlan;
- return 0;
-}
-
-static const char *
-ar7240_speed_str(u32 status)
-{
- u32 speed;
-
- speed = (status >> AR7240_PORT_STATUS_SPEED_S) &
- AR7240_PORT_STATUS_SPEED_M;
- switch (speed) {
- case AR7240_PORT_STATUS_SPEED_10:
- return "10baseT";
- case AR7240_PORT_STATUS_SPEED_100:
- return "100baseT";
- case AR7240_PORT_STATUS_SPEED_1000:
- return "1000baseT";
- }
-
- return "unknown";
-}
-
-static int
-ar7240_port_get_link(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
- u32 len;
- u32 status;
- int port;
-
- port = val->port_vlan;
-
- memset(as->buf, '\0', sizeof(as->buf));
- status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
-
- if (status & AR7240_PORT_STATUS_LINK_UP) {
- len = snprintf(as->buf, sizeof(as->buf),
- "port:%d link:up speed:%s %s-duplex %s%s%s",
- port,
- ar7240_speed_str(status),
- (status & AR7240_PORT_STATUS_DUPLEX) ?
- "full" : "half",
- (status & AR7240_PORT_STATUS_TXFLOW) ?
- "txflow ": "",
- (status & AR7240_PORT_STATUS_RXFLOW) ?
- "rxflow " : "",
- (status & AR7240_PORT_STATUS_LINK_AUTO) ?
- "auto ": "");
- } else {
- len = snprintf(as->buf, sizeof(as->buf),
- "port:%d link:down", port);
- }
-
- val->value.s = as->buf;
- val->len = len;
-
- return 0;
-}
-
-static void
-ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
-{
- struct mii_bus *mii = as->mii_bus;
-
- if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
- return;
-
- if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
- val &= AR7240_VTUDATA_MEMBER;
- val |= AR7240_VTUDATA_VALID;
- ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
- }
- op |= AR7240_VTU_ACTIVE;
- ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
-}
-
-static int
-ar7240_hw_apply(struct switch_dev *dev)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 portmask[AR7240_NUM_PORTS];
- int i, j;
-
- /* flush all vlan translation unit entries */
- ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
-
- memset(portmask, 0, sizeof(portmask));
- if (as->vlan) {
- /* calculate the port destination masks and load vlans
- * into the vlan translation unit */
- for (j = 0; j < AR7240_MAX_VLANS; j++) {
- u8 vp = as->vlan_table[j];
-
- if (!vp)
- continue;
-
- for (i = 0; i < as->swdev.ports; i++) {
- u8 mask = (1 << i);
- if (vp & mask)
- portmask[i] |= vp & ~mask;
- }
-
- ar7240_vtu_op(as,
- AR7240_VTU_OP_LOAD |
- (as->vlan_id[j] << AR7240_VTU_VID_S),
- as->vlan_table[j]);
- }
- } else {
- /* vlan disabled:
- * isolate all ports, but connect them to the cpu port */
- for (i = 0; i < as->swdev.ports; i++) {
- if (i == AR7240_PORT_CPU)
- continue;
-
- portmask[i] = 1 << AR7240_PORT_CPU;
- portmask[AR7240_PORT_CPU] |= (1 << i);
- }
- }
-
- /* update the port destination mask registers and tag settings */
- for (i = 0; i < as->swdev.ports; i++)
- ar7240sw_setup_port(as, i, portmask[i]);
-
- return 0;
-}
-
-static int
-ar7240_reset_switch(struct switch_dev *dev)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- ar7240sw_reset(as);
- return 0;
-}
-
-static int
-ar7240_get_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
- u32 status;
-
- if (port > AR7240_NUM_PORTS)
- return -EINVAL;
-
- status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
-
- link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
- link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
- link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
- link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
- link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
- switch (status & AR7240_PORT_STATUS_SPEED_M) {
- case AR7240_PORT_STATUS_SPEED_10:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case AR7240_PORT_STATUS_SPEED_100:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case AR7240_PORT_STATUS_SPEED_1000:
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- }
-
- return 0;
-}
-
-static int
-ar7240_get_port_stats(struct switch_dev *dev, int port,
- struct switch_port_stats *stats)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
-
- if (port > AR7240_NUM_PORTS)
- return -EINVAL;
-
- ar7240sw_capture_stats(as);
-
- read_lock(&as->stats_lock);
- stats->rx_bytes = as->port_stats[port].rx_good_byte;
- stats->tx_bytes = as->port_stats[port].tx_byte;
- read_unlock(&as->stats_lock);
-
- return 0;
-}
-
-static struct switch_attr ar7240_globals[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "Enable VLAN mode",
- .set = ar7240_set_vlan,
- .get = ar7240_get_vlan,
- .max = 1
- },
-};
-
-static struct switch_attr ar7240_port[] = {
- {
- .type = SWITCH_TYPE_STRING,
- .name = "link",
- .description = "Get port link information",
- .max = 1,
- .set = NULL,
- .get = ar7240_port_get_link,
- },
-};
-
-static struct switch_attr ar7240_vlan[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "vid",
- .description = "VLAN ID",
- .set = ar7240_set_vid,
- .get = ar7240_get_vid,
- .max = 4094,
- },
-};
-
-static const struct switch_dev_ops ar7240_ops = {
- .attr_global = {
- .attr = ar7240_globals,
- .n_attr = ARRAY_SIZE(ar7240_globals),
- },
- .attr_port = {
- .attr = ar7240_port,
- .n_attr = ARRAY_SIZE(ar7240_port),
- },
- .attr_vlan = {
- .attr = ar7240_vlan,
- .n_attr = ARRAY_SIZE(ar7240_vlan),
- },
- .get_port_pvid = ar7240_get_pvid,
- .set_port_pvid = ar7240_set_pvid,
- .get_vlan_ports = ar7240_get_ports,
- .set_vlan_ports = ar7240_set_ports,
- .apply_config = ar7240_hw_apply,
- .reset_switch = ar7240_reset_switch,
- .get_port_link = ar7240_get_port_link,
- .get_port_stats = ar7240_get_port_stats,
-};
-
-static struct ar7240sw *ar7240_probe(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct mii_bus *mii = ag->mii_bus;
- struct ar7240sw *as;
- struct switch_dev *swdev;
- u32 ctrl;
- u16 phy_id1;
- u16 phy_id2;
- int i;
-
- phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
- phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
- if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
- (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
- pr_err("%s: unknown phy id '%04x:%04x'\n",
- ag->dev->name, phy_id1, phy_id2);
- return NULL;
- }
-
- as = kzalloc(sizeof(*as), GFP_KERNEL);
- if (!as)
- return NULL;
-
- as->mii_bus = mii;
- as->swdata = pdata->switch_data;
-
- swdev = &as->swdev;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
- as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
- AR7240_MASK_CTRL_VERSION_M;
-
- if (sw_is_ar7240(as)) {
- swdev->name = "AR7240/AR9330 built-in switch";
- } else if (sw_is_ar934x(as)) {
- swdev->name = "AR934X built-in switch";
-
- if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
- AR934X_OPER_MODE0_MAC_GMII_EN);
- } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
- AR934X_OPER_MODE0_PHY_MII_EN);
- } else {
- pr_err("%s: invalid PHY interface mode\n",
- ag->dev->name);
- goto err_free;
- }
-
- if (as->swdata->phy4_mii_en)
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
- AR934X_REG_OPER_MODE1_PHY4_MII_EN);
- } else {
- pr_err("%s: unsupported chip, ctrl=%08x\n",
- ag->dev->name, ctrl);
- goto err_free;
- }
-
- swdev->ports = AR7240_NUM_PORTS - 1;
- swdev->cpu_port = AR7240_PORT_CPU;
- swdev->vlans = AR7240_MAX_VLANS;
- swdev->ops = &ar7240_ops;
-
- if (register_switch(&as->swdev, ag->dev) < 0)
- goto err_free;
-
- pr_info("%s: Found an %s\n", ag->dev->name, swdev->name);
-
- /* initialize defaults */
- for (i = 0; i < AR7240_MAX_VLANS; i++)
- as->vlan_id[i] = i;
-
- as->vlan_table[0] = ar7240sw_port_mask_all(as);
-
- return as;
-
-err_free:
- kfree(as);
- return NULL;
-}
-
-static void link_function(struct work_struct *work) {
- struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work);
- unsigned long flags;
- int i;
- int status = 0;
-
- for (i = 0; i < 4; i++) {
- int link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR);
- if(link & BMSR_LSTATUS) {
- status = 1;
- break;
- }
- }
-
- spin_lock_irqsave(&ag->lock, flags);
- if(status != ag->link) {
- ag->link = status;
- ag71xx_link_adjust(ag);
- }
- spin_unlock_irqrestore(&ag->lock, flags);
-
- schedule_delayed_work(&ag->link_work, HZ / 2);
-}
-
-void ag71xx_ar7240_start(struct ag71xx *ag)
-{
- struct ar7240sw *as = ag->phy_priv;
-
- ar7240sw_reset(as);
-
- ag->speed = SPEED_1000;
- ag->duplex = 1;
-
- ar7240_set_addr(as, ag->dev->dev_addr);
- ar7240_hw_apply(&as->swdev);
-
- schedule_delayed_work(&ag->link_work, HZ / 10);
-}
-
-void ag71xx_ar7240_stop(struct ag71xx *ag)
-{
- cancel_delayed_work_sync(&ag->link_work);
-}
-
-int __devinit ag71xx_ar7240_init(struct ag71xx *ag)
-{
- struct ar7240sw *as;
-
- as = ar7240_probe(ag);
- if (!as)
- return -ENODEV;
-
- ag->phy_priv = as;
- ar7240sw_reset(as);
-
- rwlock_init(&as->stats_lock);
- INIT_DELAYED_WORK(&ag->link_work, link_function);
-
- return 0;
-}
-
-void ag71xx_ar7240_cleanup(struct ag71xx *ag)
-{
- struct ar7240sw *as = ag->phy_priv;
-
- if (!as)
- return;
-
- unregister_switch(&as->swdev);
- kfree(as);
- ag->phy_priv = NULL;
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- * Special support for the Atheros ar8216 switch chip
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-#define AR8216_PACKET_TYPE_MASK 0xf
-#define AR8216_PACKET_TYPE_NORMAL 0
-
-#define AR8216_HEADER_LEN 2
-
-void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
-{
- skb_push(skb, AR8216_HEADER_LEN);
- skb->data[0] = 0x10;
- skb->data[1] = 0x80;
-}
-
-int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
- int pktlen)
-{
- u8 type;
-
- type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
- switch (type) {
- case AR8216_PACKET_TYPE_NORMAL:
- break;
-
- default:
- return -EINVAL;
- }
-
- skb_pull(skb, AR8216_HEADER_LEN);
- return 0;
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/debugfs.h>
-
-#include "ag71xx.h"
-
-static struct dentry *ag71xx_debugfs_root;
-
-static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
-{
- if (status)
- ag->debug.int_stats.total++;
- if (status & AG71XX_INT_TX_PS)
- ag->debug.int_stats.tx_ps++;
- if (status & AG71XX_INT_TX_UR)
- ag->debug.int_stats.tx_ur++;
- if (status & AG71XX_INT_TX_BE)
- ag->debug.int_stats.tx_be++;
- if (status & AG71XX_INT_RX_PR)
- ag->debug.int_stats.rx_pr++;
- if (status & AG71XX_INT_RX_OF)
- ag->debug.int_stats.rx_of++;
- if (status & AG71XX_INT_RX_BE)
- ag->debug.int_stats.rx_be++;
-}
-
-static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
-#define PR_INT_STAT(_label, _field) \
- len += snprintf(buf + len, sizeof(buf) - len, \
- "%20s: %10lu\n", _label, ag->debug.int_stats._field);
-
- struct ag71xx *ag = file->private_data;
- char buf[256];
- unsigned int len = 0;
-
- PR_INT_STAT("TX Packet Sent", tx_ps);
- PR_INT_STAT("TX Underrun", tx_ur);
- PR_INT_STAT("TX Bus Error", tx_be);
- PR_INT_STAT("RX Packet Received", rx_pr);
- PR_INT_STAT("RX Overflow", rx_of);
- PR_INT_STAT("RX Bus Error", rx_be);
- len += snprintf(buf + len, sizeof(buf) - len, "\n");
- PR_INT_STAT("Total", total);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-#undef PR_INT_STAT
-}
-
-static const struct file_operations ag71xx_fops_int_stats = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_int_stats,
- .owner = THIS_MODULE
-};
-
-void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
-{
- struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
-
- if (rx) {
- stats->rx_count++;
- stats->rx_packets += rx;
- if (rx <= AG71XX_NAPI_WEIGHT)
- stats->rx[rx]++;
- if (rx > stats->rx_packets_max)
- stats->rx_packets_max = rx;
- }
-
- if (tx) {
- stats->tx_count++;
- stats->tx_packets += tx;
- if (tx <= AG71XX_NAPI_WEIGHT)
- stats->tx[tx]++;
- if (tx > stats->tx_packets_max)
- stats->tx_packets_max = tx;
- }
-}
-
-static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
- struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
- char *buf;
- unsigned int buflen;
- unsigned int len = 0;
- unsigned long rx_avg = 0;
- unsigned long tx_avg = 0;
- int ret;
- int i;
-
- buflen = 2048;
- buf = kmalloc(buflen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (stats->rx_count)
- rx_avg = stats->rx_packets / stats->rx_count;
-
- if (stats->tx_count)
- tx_avg = stats->tx_packets / stats->tx_count;
-
- len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n",
- "len", "rx", "tx");
-
- for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
- len += snprintf(buf + len, buflen - len,
- "%3d: %10lu %10lu\n",
- i, stats->rx[i], stats->tx[i]);
-
- len += snprintf(buf + len, buflen - len, "\n");
-
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "sum", stats->rx_count, stats->tx_count);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "avg", rx_avg, tx_avg);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "max", stats->rx_packets_max, stats->tx_packets_max);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "pkt", stats->rx_packets, stats->tx_packets);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
- kfree(buf);
-
- return ret;
-}
-
-static const struct file_operations ag71xx_fops_napi_stats = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_napi_stats,
- .owner = THIS_MODULE
-};
-
-#define DESC_PRINT_LEN 64
-
-static ssize_t read_file_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos,
- struct ag71xx *ag,
- struct ag71xx_ring *ring,
- unsigned desc_reg)
-{
- char *buf;
- unsigned int buflen;
- unsigned int len = 0;
- unsigned long flags;
- ssize_t ret;
- int curr;
- int dirty;
- u32 desc_hw;
- int i;
-
- buflen = (ring->size * DESC_PRINT_LEN);
- buf = kmalloc(buflen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- len += snprintf(buf + len, buflen - len,
- "Idx ... %-8s %-8s %-8s %-8s . %-10s\n",
- "desc", "next", "data", "ctrl", "timestamp");
-
- spin_lock_irqsave(&ag->lock, flags);
-
- curr = (ring->curr % ring->size);
- dirty = (ring->dirty % ring->size);
- desc_hw = ag71xx_rr(ag, desc_reg);
- for (i = 0; i < ring->size; i++) {
- struct ag71xx_buf *ab = &ring->buf[i];
- u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size;
-
- len += snprintf(buf + len, buflen - len,
- "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n",
- i,
- (i == curr) ? 'C' : ' ',
- (i == dirty) ? 'D' : ' ',
- (desc_hw == desc_dma) ? 'H' : ' ',
- desc_dma,
- ab->desc->next,
- ab->desc->data,
- ab->desc->ctrl,
- (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*',
- ab->timestamp);
- }
-
- spin_unlock_irqrestore(&ag->lock, flags);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
- kfree(buf);
-
- return ret;
-}
-
-static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
-
- return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
- AG71XX_REG_TX_DESC);
-}
-
-static const struct file_operations ag71xx_fops_tx_ring = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_tx_ring,
- .owner = THIS_MODULE
-};
-
-static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
-
- return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
- AG71XX_REG_RX_DESC);
-}
-
-static const struct file_operations ag71xx_fops_rx_ring = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_rx_ring,
- .owner = THIS_MODULE
-};
-
-void ag71xx_debugfs_exit(struct ag71xx *ag)
-{
- debugfs_remove_recursive(ag->debug.debugfs_dir);
-}
-
-int ag71xx_debugfs_init(struct ag71xx *ag)
-{
- ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name,
- ag71xx_debugfs_root);
- if (!ag->debug.debugfs_dir)
- return -ENOMEM;
-
- debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_int_stats);
- debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_napi_stats);
- debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_tx_ring);
- debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_rx_ring);
-
- return 0;
-}
-
-int ag71xx_debugfs_root_init(void)
-{
- if (ag71xx_debugfs_root)
- return -EBUSY;
-
- ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
- if (!ag71xx_debugfs_root)
- return -ENOENT;
-
- return 0;
-}
-
-void ag71xx_debugfs_root_exit(void)
-{
- debugfs_remove(ag71xx_debugfs_root);
- ag71xx_debugfs_root = NULL;
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-static int ag71xx_ethtool_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
-
- if (!phydev)
- return -ENODEV;
-
- return phy_ethtool_gset(phydev, cmd);
-}
-
-static int ag71xx_ethtool_set_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
-
- if (!phydev)
- return -ENODEV;
-
- return phy_ethtool_sset(phydev, cmd);
-}
-
-static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- strcpy(info->driver, ag->pdev->dev.driver->name);
- strcpy(info->version, AG71XX_DRV_VERSION);
- strcpy(info->bus_info, dev_name(&ag->pdev->dev));
-}
-
-static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- return ag->msg_enable;
-}
-
-static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- ag->msg_enable = msg_level;
-}
-
-static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
- struct ethtool_ringparam *er)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
- er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
- er->rx_mini_max_pending = 0;
- er->rx_jumbo_max_pending = 0;
-
- er->tx_pending = ag->tx_ring.size;
- er->rx_pending = ag->rx_ring.size;
- er->rx_mini_pending = 0;
- er->rx_jumbo_pending = 0;
-}
-
-static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
- struct ethtool_ringparam *er)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned tx_size;
- unsigned rx_size;
- int err;
-
- if (er->rx_mini_pending != 0||
- er->rx_jumbo_pending != 0 ||
- er->rx_pending == 0 ||
- er->tx_pending == 0)
- return -EINVAL;
-
- tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
- er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
-
- rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
- er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
-
- if (netif_running(dev)) {
- err = dev->netdev_ops->ndo_stop(dev);
- if (err)
- return err;
- }
-
- ag->tx_ring.size = tx_size;
- ag->rx_ring.size = rx_size;
-
- if (netif_running(dev))
- err = dev->netdev_ops->ndo_open(dev);
-
- return err;
-}
-
-struct ethtool_ops ag71xx_ethtool_ops = {
- .set_settings = ag71xx_ethtool_set_settings,
- .get_settings = ag71xx_ethtool_get_settings,
- .get_drvinfo = ag71xx_ethtool_get_drvinfo,
- .get_msglevel = ag71xx_ethtool_get_msglevel,
- .set_msglevel = ag71xx_ethtool_set_msglevel,
- .get_ringparam = ag71xx_ethtool_get_ringparam,
- .set_ringparam = ag71xx_ethtool_set_ringparam,
- .get_link = ethtool_op_get_link,
-};
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-#define AG71XX_DEFAULT_MSG_ENABLE \
- (NETIF_MSG_DRV \
- | NETIF_MSG_PROBE \
- | NETIF_MSG_LINK \
- | NETIF_MSG_TIMER \
- | NETIF_MSG_IFDOWN \
- | NETIF_MSG_IFUP \
- | NETIF_MSG_RX_ERR \
- | NETIF_MSG_TX_ERR)
-
-static int ag71xx_msg_level = -1;
-
-module_param_named(msg_level, ag71xx_msg_level, int, 0);
-MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
-
-static void ag71xx_dump_dma_regs(struct ag71xx *ag)
-{
- DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
- ag71xx_rr(ag, AG71XX_REG_TX_DESC),
- ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
-
- DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
- ag71xx_rr(ag, AG71XX_REG_RX_DESC),
- ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
-}
-
-static void ag71xx_dump_regs(struct ag71xx *ag)
-{
- DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
- ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
- ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
- ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
- DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
- ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
- ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
- DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
- DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
-}
-
-static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
-{
- DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
- ag->dev->name, label, intr,
- (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
- (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
- (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
- (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
- (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
- (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
-}
-
-static void ag71xx_ring_free(struct ag71xx_ring *ring)
-{
- kfree(ring->buf);
-
- if (ring->descs_cpu)
- dma_free_coherent(NULL, ring->size * ring->desc_size,
- ring->descs_cpu, ring->descs_dma);
-}
-
-static int ag71xx_ring_alloc(struct ag71xx_ring *ring)
-{
- int err;
- int i;
-
- ring->desc_size = sizeof(struct ag71xx_desc);
- if (ring->desc_size % cache_line_size()) {
- DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
- ring, ring->desc_size,
- roundup(ring->desc_size, cache_line_size()));
- ring->desc_size = roundup(ring->desc_size, cache_line_size());
- }
-
- ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size,
- &ring->descs_dma, GFP_ATOMIC);
- if (!ring->descs_cpu) {
- err = -ENOMEM;
- goto err;
- }
-
-
- ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL);
- if (!ring->buf) {
- err = -ENOMEM;
- goto err;
- }
-
- for (i = 0; i < ring->size; i++) {
- int idx = i * ring->desc_size;
- ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx];
- DBG("ag71xx: ring %p, desc %d at %p\n",
- ring, i, ring->buf[i].desc);
- }
-
- return 0;
-
-err:
- return err;
-}
-
-static void ag71xx_ring_tx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct net_device *dev = ag->dev;
-
- while (ring->curr != ring->dirty) {
- u32 i = ring->dirty % ring->size;
-
- if (!ag71xx_desc_empty(ring->buf[i].desc)) {
- ring->buf[i].desc->ctrl = 0;
- dev->stats.tx_errors++;
- }
-
- if (ring->buf[i].skb)
- dev_kfree_skb_any(ring->buf[i].skb);
-
- ring->buf[i].skb = NULL;
-
- ring->dirty++;
- }
-
- /* flush descriptors */
- wmb();
-
-}
-
-static void ag71xx_ring_tx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- int i;
-
- for (i = 0; i < ring->size; i++) {
- ring->buf[i].desc->next = (u32) (ring->descs_dma +
- ring->desc_size * ((i + 1) % ring->size));
-
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- ring->buf[i].skb = NULL;
- }
-
- /* flush descriptors */
- wmb();
-
- ring->curr = 0;
- ring->dirty = 0;
-}
-
-static void ag71xx_ring_rx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int i;
-
- if (!ring->buf)
- return;
-
- for (i = 0; i < ring->size; i++)
- if (ring->buf[i].skb) {
- dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
- AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE);
- kfree_skb(ring->buf[i].skb);
- }
-}
-
-static int ag71xx_rx_reserve(struct ag71xx *ag)
-{
- int reserve = 0;
-
- if (ag71xx_get_pdata(ag)->is_ar724x) {
- if (!ag71xx_has_ar8216(ag))
- reserve = 2;
-
- if (ag->phy_dev)
- reserve += 4 - (ag->phy_dev->pkt_align % 4);
-
- reserve %= 4;
- }
-
- return reserve + AG71XX_RX_PKT_RESERVE;
-}
-
-
-static int ag71xx_ring_rx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- unsigned int reserve = ag71xx_rx_reserve(ag);
- unsigned int i;
- int ret;
-
- ret = 0;
- for (i = 0; i < ring->size; i++) {
- ring->buf[i].desc->next = (u32) (ring->descs_dma +
- ring->desc_size * ((i + 1) % ring->size));
-
- DBG("ag71xx: RX desc at %p, next is %08x\n",
- ring->buf[i].desc,
- ring->buf[i].desc->next);
- }
-
- for (i = 0; i < ring->size; i++) {
- struct sk_buff *skb;
- dma_addr_t dma_addr;
-
- skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve);
- if (!skb) {
- ret = -ENOMEM;
- break;
- }
-
- skb->dev = ag->dev;
- skb_reserve(skb, reserve);
-
- dma_addr = dma_map_single(&ag->dev->dev, skb->data,
- AG71XX_RX_PKT_SIZE,
- DMA_FROM_DEVICE);
- ring->buf[i].skb = skb;
- ring->buf[i].dma_addr = dma_addr;
- ring->buf[i].desc->data = (u32) dma_addr;
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- }
-
- /* flush descriptors */
- wmb();
-
- ring->curr = 0;
- ring->dirty = 0;
-
- return ret;
-}
-
-static int ag71xx_ring_rx_refill(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- unsigned int reserve = ag71xx_rx_reserve(ag);
- unsigned int count;
-
- count = 0;
- for (; ring->curr - ring->dirty > 0; ring->dirty++) {
- unsigned int i;
-
- i = ring->dirty % ring->size;
-
- if (ring->buf[i].skb == NULL) {
- dma_addr_t dma_addr;
- struct sk_buff *skb;
-
- skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve);
- if (skb == NULL)
- break;
-
- skb_reserve(skb, reserve);
- skb->dev = ag->dev;
-
- dma_addr = dma_map_single(&ag->dev->dev, skb->data,
- AG71XX_RX_PKT_SIZE,
- DMA_FROM_DEVICE);
-
- ring->buf[i].skb = skb;
- ring->buf[i].dma_addr = dma_addr;
- ring->buf[i].desc->data = (u32) dma_addr;
- }
-
- ring->buf[i].desc->ctrl = DESC_EMPTY;
- count++;
- }
-
- /* flush descriptors */
- wmb();
-
- DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
-
- return count;
-}
-
-static int ag71xx_rings_init(struct ag71xx *ag)
-{
- int ret;
-
- ret = ag71xx_ring_alloc(&ag->tx_ring);
- if (ret)
- return ret;
-
- ag71xx_ring_tx_init(ag);
-
- ret = ag71xx_ring_alloc(&ag->rx_ring);
- if (ret)
- return ret;
-
- ret = ag71xx_ring_rx_init(ag);
- return ret;
-}
-
-static void ag71xx_rings_cleanup(struct ag71xx *ag)
-{
- ag71xx_ring_rx_clean(ag);
- ag71xx_ring_free(&ag->rx_ring);
-
- ag71xx_ring_tx_clean(ag);
- ag71xx_ring_free(&ag->tx_ring);
-}
-
-static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
-{
- switch (ag->speed) {
- case SPEED_1000:
- return "1000";
- case SPEED_100:
- return "100";
- case SPEED_10:
- return "10";
- }
-
- return "?";
-}
-
-static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
-{
- u32 t;
-
- t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
- | (((u32) mac[3]) << 8) | ((u32) mac[2]);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
-
- t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
-}
-
-static void ag71xx_dma_reset(struct ag71xx *ag)
-{
- u32 val;
- int i;
-
- ag71xx_dump_dma_regs(ag);
-
- /* stop RX and TX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-
- /*
- * give the hardware some time to really stop all rx/tx activity
- * clearing the descriptors too early causes random memory corruption
- */
- mdelay(1);
-
- /* clear descriptor addresses */
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
-
- /* clear pending RX/TX interrupts */
- for (i = 0; i < 256; i++) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
- }
-
- /* clear pending errors */
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
-
- val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (val)
- pr_alert("%s: unable to clear DMA Rx status: %08x\n",
- ag->dev->name, val);
-
- val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
-
- /* mask out reserved bits */
- val &= ~0xff000000;
-
- if (val)
- pr_alert("%s: unable to clear DMA Tx status: %08x\n",
- ag->dev->name, val);
-
- ag71xx_dump_dma_regs(ag);
-}
-
-#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
- MAC_CFG1_SRX | MAC_CFG1_STX)
-
-#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
-
-#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
- FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
- FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
- FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
- FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
- FIFO_CFG4_VT)
-
-#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
- FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
- FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
- FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
- FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
- FIFO_CFG5_17 | FIFO_CFG5_SF)
-
-static void ag71xx_hw_stop(struct ag71xx *ag)
-{
- /* disable all interrupts and stop the rx/tx engine */
- ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-}
-
-static void ag71xx_hw_setup(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- /* setup MAC configuration registers */
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
- MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
-
- /* setup max frame length */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN);
-
- /* setup FIFO configuration registers */
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
- if (pdata->is_ar724x) {
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2);
- } else {
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
- }
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
-}
-
-static void ag71xx_hw_init(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- u32 reset_mask = pdata->reset_bit;
-
- ag71xx_hw_stop(ag);
-
- if (pdata->is_ar724x) {
- u32 reset_phy = reset_mask;
-
- reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY;
- reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY);
-
- ath79_device_reset_set(reset_phy);
- mdelay(50);
- ath79_device_reset_clear(reset_phy);
- mdelay(200);
- }
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
- udelay(20);
-
- ath79_device_reset_set(reset_mask);
- mdelay(100);
- ath79_device_reset_clear(reset_mask);
- mdelay(200);
-
- ag71xx_hw_setup(ag);
-
- ag71xx_dma_reset(ag);
-}
-
-static void ag71xx_fast_reset(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct net_device *dev = ag->dev;
- u32 reset_mask = pdata->reset_bit;
- u32 rx_ds, tx_ds;
- u32 mii_reg;
-
- reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC;
-
- mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
- rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
- tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC);
-
- ath79_device_reset_set(reset_mask);
- udelay(10);
- ath79_device_reset_clear(reset_mask);
- udelay(10);
-
- ag71xx_dma_reset(ag);
- ag71xx_hw_setup(ag);
-
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds);
- ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
-
- ag71xx_hw_set_macaddr(ag, dev->dev_addr);
-}
-
-static void ag71xx_hw_start(struct ag71xx *ag)
-{
- /* start RX engine */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
-
- /* enable interrupts */
- ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
-}
-
-void ag71xx_link_adjust(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- u32 cfg2;
- u32 ifctl;
- u32 fifo5;
-
- if (!ag->link) {
- ag71xx_hw_stop(ag);
- netif_carrier_off(ag->dev);
- if (netif_msg_link(ag))
- pr_info("%s: link down\n", ag->dev->name);
- return;
- }
-
- if (pdata->is_ar724x)
- ag71xx_fast_reset(ag);
-
- cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
- cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
- cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
-
- ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
- ifctl &= ~(MAC_IFCTL_SPEED);
-
- fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
- fifo5 &= ~FIFO_CFG5_BM;
-
- switch (ag->speed) {
- case SPEED_1000:
- cfg2 |= MAC_CFG2_IF_1000;
- fifo5 |= FIFO_CFG5_BM;
- break;
- case SPEED_100:
- cfg2 |= MAC_CFG2_IF_10_100;
- ifctl |= MAC_IFCTL_SPEED;
- break;
- case SPEED_10:
- cfg2 |= MAC_CFG2_IF_10_100;
- break;
- default:
- BUG();
- return;
- }
-
- if (pdata->is_ar91xx)
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
- else if (pdata->is_ar724x)
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3);
- else
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
-
- if (pdata->set_speed)
- pdata->set_speed(ag->speed);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
- ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
- ag71xx_hw_start(ag);
-
- netif_carrier_on(ag->dev);
- if (netif_msg_link(ag))
- pr_info("%s: link up (%sMbps/%s duplex)\n",
- ag->dev->name,
- ag71xx_speed_str(ag),
- (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
-
- DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
-
- DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
-
- DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
- ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL));
-}
-
-static int ag71xx_open(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- int ret;
-
- ret = ag71xx_rings_init(ag);
- if (ret)
- goto err;
-
- napi_enable(&ag->napi);
-
- netif_carrier_off(dev);
- ag71xx_phy_start(ag);
-
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
-
- ag71xx_hw_set_macaddr(ag, dev->dev_addr);
-
- netif_start_queue(dev);
-
- return 0;
-
-err:
- ag71xx_rings_cleanup(ag);
- return ret;
-}
-
-static int ag71xx_stop(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned long flags;
-
- netif_carrier_off(dev);
- ag71xx_phy_stop(ag);
-
- spin_lock_irqsave(&ag->lock, flags);
-
- netif_stop_queue(dev);
-
- ag71xx_hw_stop(ag);
- ag71xx_dma_reset(ag);
-
- napi_disable(&ag->napi);
- del_timer_sync(&ag->oom_timer);
-
- spin_unlock_irqrestore(&ag->lock, flags);
-
- ag71xx_rings_cleanup(ag);
-
- return 0;
-}
-
-static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct ag71xx_desc *desc;
- dma_addr_t dma_addr;
- int i;
-
- i = ring->curr % ring->size;
- desc = ring->buf[i].desc;
-
- if (!ag71xx_desc_empty(desc))
- goto err_drop;
-
- if (ag71xx_has_ar8216(ag))
- ag71xx_add_ar8216_header(ag, skb);
-
- if (skb->len <= 0) {
- DBG("%s: packet len is too small\n", ag->dev->name);
- goto err_drop;
- }
-
- dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
-
- ring->buf[i].skb = skb;
- ring->buf[i].timestamp = jiffies;
-
- /* setup descriptor fields */
- desc->data = (u32) dma_addr;
- desc->ctrl = (skb->len & DESC_PKTLEN_M);
-
- /* flush descriptor */
- wmb();
-
- ring->curr++;
- if (ring->curr == (ring->dirty + ring->size)) {
- DBG("%s: tx queue full\n", ag->dev->name);
- netif_stop_queue(dev);
- }
-
- DBG("%s: packet injected into TX queue\n", ag->dev->name);
-
- /* enable TX engine */
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
-
- return NETDEV_TX_OK;
-
-err_drop:
- dev->stats.tx_dropped++;
-
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-}
-
-static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
- int ret;
-
- switch (cmd) {
- case SIOCETHTOOL:
- if (ag->phy_dev == NULL)
- break;
-
- spin_lock_irq(&ag->lock);
- ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
- spin_unlock_irq(&ag->lock);
- return ret;
-
- case SIOCSIFHWADDR:
- if (copy_from_user
- (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGIFHWADDR:
- if (copy_to_user
- (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- if (ag->phy_dev == NULL)
- break;
-
- return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
-
- default:
- break;
- }
-
- return -EOPNOTSUPP;
-}
-
-static void ag71xx_oom_timer_handler(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ag71xx *ag = netdev_priv(dev);
-
- napi_schedule(&ag->napi);
-}
-
-static void ag71xx_tx_timeout(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- if (netif_msg_tx_err(ag))
- pr_info("%s: tx timeout\n", ag->dev->name);
-
- schedule_work(&ag->restart_work);
-}
-
-static void ag71xx_restart_work_func(struct work_struct *work)
-{
- struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
-
- if (ag71xx_get_pdata(ag)->is_ar724x) {
- ag->link = 0;
- ag71xx_link_adjust(ag);
- return;
- }
-
- ag71xx_stop(ag->dev);
- ag71xx_open(ag->dev);
-}
-
-static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp)
-{
- u32 rx_sm, tx_sm, rx_fd;
-
- if (likely(time_before(jiffies, timestamp + HZ/10)))
- return false;
-
- if (!netif_carrier_ok(ag->dev))
- return false;
-
- rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
- if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
- return true;
-
- tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
- rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
- if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
- ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
- return true;
-
- return false;
-}
-
-static int ag71xx_tx_packets(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- int sent;
-
- DBG("%s: processing TX ring\n", ag->dev->name);
-
- sent = 0;
- while (ring->dirty != ring->curr) {
- unsigned int i = ring->dirty % ring->size;
- struct ag71xx_desc *desc = ring->buf[i].desc;
- struct sk_buff *skb = ring->buf[i].skb;
-
- if (!ag71xx_desc_empty(desc)) {
- if (pdata->is_ar7240 &&
- ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp))
- schedule_work(&ag->restart_work);
- break;
- }
-
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
-
- ag->dev->stats.tx_bytes += skb->len;
- ag->dev->stats.tx_packets++;
-
- dev_kfree_skb_any(skb);
- ring->buf[i].skb = NULL;
-
- ring->dirty++;
- sent++;
- }
-
- DBG("%s: %d packets sent out\n", ag->dev->name, sent);
-
- if ((ring->curr - ring->dirty) < (ring->size * 3) / 4)
- netif_wake_queue(ag->dev);
-
- return sent;
-}
-
-static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
-{
- struct net_device *dev = ag->dev;
- struct ag71xx_ring *ring = &ag->rx_ring;
- int done = 0;
-
- DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
- dev->name, limit, ring->curr, ring->dirty);
-
- while (done < limit) {
- unsigned int i = ring->curr % ring->size;
- struct ag71xx_desc *desc = ring->buf[i].desc;
- struct sk_buff *skb;
- int pktlen;
- int err = 0;
-
- if (ag71xx_desc_empty(desc))
- break;
-
- if ((ring->dirty + ring->size) == ring->curr) {
- ag71xx_assert(0);
- break;
- }
-
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
-
- skb = ring->buf[i].skb;
- pktlen = ag71xx_desc_pktlen(desc);
- pktlen -= ETH_FCS_LEN;
-
- dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
- AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE);
-
- dev->last_rx = jiffies;
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pktlen;
-
- skb_put(skb, pktlen);
- if (ag71xx_has_ar8216(ag))
- err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
-
- if (err) {
- dev->stats.rx_dropped++;
- kfree_skb(skb);
- } else {
- skb->dev = dev;
- skb->ip_summed = CHECKSUM_NONE;
- if (ag->phy_dev) {
- ag->phy_dev->netif_receive_skb(skb);
- } else {
- skb->protocol = eth_type_trans(skb, dev);
- netif_receive_skb(skb);
- }
- }
-
- ring->buf[i].skb = NULL;
- done++;
-
- ring->curr++;
- }
-
- ag71xx_ring_rx_refill(ag);
-
- DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
- dev->name, ring->curr, ring->dirty, done);
-
- return done;
-}
-
-static int ag71xx_poll(struct napi_struct *napi, int limit)
-{
- struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct net_device *dev = ag->dev;
- struct ag71xx_ring *rx_ring;
- unsigned long flags;
- u32 status;
- int tx_done;
- int rx_done;
-
- pdata->ddr_flush();
- tx_done = ag71xx_tx_packets(ag);
-
- DBG("%s: processing RX ring\n", dev->name);
- rx_done = ag71xx_rx_packets(ag, limit);
-
- ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
-
- rx_ring = &ag->rx_ring;
- if (rx_ring->buf[rx_ring->dirty % rx_ring->size].skb == NULL)
- goto oom;
-
- status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (unlikely(status & RX_STATUS_OF)) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
- dev->stats.rx_fifo_errors++;
-
- /* restart RX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
- }
-
- if (rx_done < limit) {
- if (status & RX_STATUS_PR)
- goto more;
-
- status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
- if (status & TX_STATUS_PS)
- goto more;
-
- DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
- dev->name, rx_done, tx_done, limit);
-
- napi_complete(napi);
-
- /* enable interrupts */
- spin_lock_irqsave(&ag->lock, flags);
- ag71xx_int_enable(ag, AG71XX_INT_POLL);
- spin_unlock_irqrestore(&ag->lock, flags);
- return rx_done;
- }
-
-more:
- DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
- dev->name, rx_done, tx_done, limit);
- return rx_done;
-
-oom:
- if (netif_msg_rx_err(ag))
- pr_info("%s: out of memory\n", dev->name);
-
- mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
- napi_complete(napi);
- return 0;
-}
-
-static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct ag71xx *ag = netdev_priv(dev);
- u32 status;
-
- status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
- ag71xx_dump_intr(ag, "raw", status);
-
- if (unlikely(!status))
- return IRQ_NONE;
-
- if (unlikely(status & AG71XX_INT_ERR)) {
- if (status & AG71XX_INT_TX_BE) {
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
- dev_err(&dev->dev, "TX BUS error\n");
- }
- if (status & AG71XX_INT_RX_BE) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
- dev_err(&dev->dev, "RX BUS error\n");
- }
- }
-
- if (likely(status & AG71XX_INT_POLL)) {
- ag71xx_int_disable(ag, AG71XX_INT_POLL);
- DBG("%s: enable polling mode\n", dev->name);
- napi_schedule(&ag->napi);
- }
-
- ag71xx_debugfs_update_int_stats(ag, status);
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void ag71xx_netpoll(struct net_device *dev)
-{
- disable_irq(dev->irq);
- ag71xx_interrupt(dev->irq, dev);
- enable_irq(dev->irq);
-}
-#endif
-
-static const struct net_device_ops ag71xx_netdev_ops = {
- .ndo_open = ag71xx_open,
- .ndo_stop = ag71xx_stop,
- .ndo_start_xmit = ag71xx_hard_start_xmit,
- .ndo_do_ioctl = ag71xx_do_ioctl,
- .ndo_tx_timeout = ag71xx_tx_timeout,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ag71xx_netpoll,
-#endif
-};
-
-static int __devinit ag71xx_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct resource *res;
- struct ag71xx *ag;
- struct ag71xx_platform_data *pdata;
- int err;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data specified\n");
- err = -ENXIO;
- goto err_out;
- }
-
- if (pdata->mii_bus_dev == NULL) {
- dev_err(&pdev->dev, "no MII bus device specified\n");
- err = -EINVAL;
- goto err_out;
- }
-
- dev = alloc_etherdev(sizeof(*ag));
- if (!dev) {
- dev_err(&pdev->dev, "alloc_etherdev failed\n");
- err = -ENOMEM;
- goto err_out;
- }
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- ag = netdev_priv(dev);
- ag->pdev = pdev;
- ag->dev = dev;
- ag->msg_enable = netif_msg_init(ag71xx_msg_level,
- AG71XX_DEFAULT_MSG_ENABLE);
- spin_lock_init(&ag->lock);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
- if (!res) {
- dev_err(&pdev->dev, "no mac_base resource found\n");
- err = -ENXIO;
- goto err_out;
- }
-
- ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
- if (!ag->mac_base) {
- dev_err(&pdev->dev, "unable to ioremap mac_base\n");
- err = -ENOMEM;
- goto err_free_dev;
- }
-
- dev->irq = platform_get_irq(pdev, 0);
- err = request_irq(dev->irq, ag71xx_interrupt,
- IRQF_DISABLED,
- dev->name, dev);
- if (err) {
- dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
- goto err_unmap_base;
- }
-
- dev->base_addr = (unsigned long)ag->mac_base;
- dev->netdev_ops = &ag71xx_netdev_ops;
- dev->ethtool_ops = &ag71xx_ethtool_ops;
-
- INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
-
- init_timer(&ag->oom_timer);
- ag->oom_timer.data = (unsigned long) dev;
- ag->oom_timer.function = ag71xx_oom_timer_handler;
-
- ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT;
- ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT;
-
- ag->stop_desc = dma_alloc_coherent(NULL,
- sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL);
-
- if (!ag->stop_desc)
- goto err_free_irq;
-
- ag->stop_desc->data = 0;
- ag->stop_desc->ctrl = 0;
- ag->stop_desc->next = (u32) ag->stop_desc_dma;
-
- memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
-
- netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
-
- err = register_netdev(dev);
- if (err) {
- dev_err(&pdev->dev, "unable to register net device\n");
- goto err_free_desc;
- }
-
- pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d\n",
- dev->name, dev->base_addr, dev->irq);
-
- ag71xx_dump_regs(ag);
-
- ag71xx_hw_init(ag);
-
- ag71xx_dump_regs(ag);
-
- err = ag71xx_phy_connect(ag);
- if (err)
- goto err_unregister_netdev;
-
- err = ag71xx_debugfs_init(ag);
- if (err)
- goto err_phy_disconnect;
-
- platform_set_drvdata(pdev, dev);
-
- return 0;
-
-err_phy_disconnect:
- ag71xx_phy_disconnect(ag);
-err_unregister_netdev:
- unregister_netdev(dev);
-err_free_desc:
- dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc,
- ag->stop_desc_dma);
-err_free_irq:
- free_irq(dev->irq, dev);
-err_unmap_base:
- iounmap(ag->mac_base);
-err_free_dev:
- kfree(dev);
-err_out:
- platform_set_drvdata(pdev, NULL);
- return err;
-}
-
-static int __devexit ag71xx_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
-
- if (dev) {
- struct ag71xx *ag = netdev_priv(dev);
-
- ag71xx_debugfs_exit(ag);
- ag71xx_phy_disconnect(ag);
- unregister_netdev(dev);
- free_irq(dev->irq, dev);
- iounmap(ag->mac_base);
- kfree(dev);
- platform_set_drvdata(pdev, NULL);
- }
-
- return 0;
-}
-
-static struct platform_driver ag71xx_driver = {
- .probe = ag71xx_probe,
- .remove = __exit_p(ag71xx_remove),
- .driver = {
- .name = AG71XX_DRV_NAME,
- }
-};
-
-static int __init ag71xx_module_init(void)
-{
- int ret;
-
- ret = ag71xx_debugfs_root_init();
- if (ret)
- goto err_out;
-
- ret = ag71xx_mdio_driver_init();
- if (ret)
- goto err_debugfs_exit;
-
- ret = platform_driver_register(&ag71xx_driver);
- if (ret)
- goto err_mdio_exit;
-
- return 0;
-
-err_mdio_exit:
- ag71xx_mdio_driver_exit();
-err_debugfs_exit:
- ag71xx_debugfs_root_exit();
-err_out:
- return ret;
-}
-
-static void __exit ag71xx_module_exit(void)
-{
- platform_driver_unregister(&ag71xx_driver);
- ag71xx_mdio_driver_exit();
- ag71xx_debugfs_root_exit();
-}
-
-module_init(ag71xx_module_init);
-module_exit(ag71xx_module_exit);
-
-MODULE_VERSION(AG71XX_DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-#define AG71XX_MDIO_RETRY 1000
-#define AG71XX_MDIO_DELAY 5
-
-static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
- u32 value)
-{
- void __iomem *r;
-
- r = am->mdio_base + reg;
- __raw_writel(value, r);
-
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
-{
- return __raw_readl(am->mdio_base + reg);
-}
-
-static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
-{
- DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
- am->mii_bus->name,
- ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
- DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
- am->mii_bus->name,
- ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
-}
-
-int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
-{
- int ret;
- int i;
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
- ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
-
- i = AG71XX_MDIO_RETRY;
- while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
- if (i-- == 0) {
- pr_err("%s: mii_read timed out\n", am->mii_bus->name);
- ret = 0xffff;
- goto out;
- }
- udelay(AG71XX_MDIO_DELAY);
- }
-
- ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
-
- DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
-
-out:
- return ret;
-}
-
-void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val)
-{
- int i;
-
- DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
-
- i = AG71XX_MDIO_RETRY;
- while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
- if (i-- == 0) {
- pr_err("%s: mii_write timed out\n", am->mii_bus->name);
- break;
- }
- udelay(AG71XX_MDIO_DELAY);
- }
-}
-
-static int ag71xx_mdio_reset(struct mii_bus *bus)
-{
- struct ag71xx_mdio *am = bus->priv;
- u32 t;
-
- if (am->pdata->is_ar7240)
- t = MII_CFG_CLK_DIV_6;
- else
- t = MII_CFG_CLK_DIV_28;
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
- udelay(100);
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
- udelay(100);
-
- return 0;
-}
-
-static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
-{
- struct ag71xx_mdio *am = bus->priv;
-
- if (am->pdata->is_ar7240)
- return ar7240sw_phy_read(bus, addr, reg);
- else
- return ag71xx_mdio_mii_read(am, addr, reg);
-}
-
-static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
-{
- struct ag71xx_mdio *am = bus->priv;
-
- if (am->pdata->is_ar7240)
- ar7240sw_phy_write(bus, addr, reg, val);
- else
- ag71xx_mdio_mii_write(am, addr, reg, val);
- return 0;
-}
-
-static int __devinit ag71xx_mdio_probe(struct platform_device *pdev)
-{
- struct ag71xx_mdio_platform_data *pdata;
- struct ag71xx_mdio *am;
- struct resource *res;
- int i;
- int err;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data specified\n");
- return -EINVAL;
- }
-
- am = kzalloc(sizeof(*am), GFP_KERNEL);
- if (!am) {
- err = -ENOMEM;
- goto err_out;
- }
-
- am->pdata = pdata;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no iomem resource found\n");
- err = -ENXIO;
- goto err_out;
- }
-
- am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
- if (!am->mdio_base) {
- dev_err(&pdev->dev, "unable to ioremap registers\n");
- err = -ENOMEM;
- goto err_free_mdio;
- }
-
- am->mii_bus = mdiobus_alloc();
- if (am->mii_bus == NULL) {
- err = -ENOMEM;
- goto err_iounmap;
- }
-
- am->mii_bus->name = "ag71xx_mdio";
- am->mii_bus->read = ag71xx_mdio_read;
- am->mii_bus->write = ag71xx_mdio_write;
- am->mii_bus->reset = ag71xx_mdio_reset;
- am->mii_bus->irq = am->mii_irq;
- am->mii_bus->priv = am;
- am->mii_bus->parent = &pdev->dev;
- snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
- am->mii_bus->phy_mask = pdata->phy_mask;
-
- for (i = 0; i < PHY_MAX_ADDR; i++)
- am->mii_irq[i] = PHY_POLL;
-
- ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
-
- err = mdiobus_register(am->mii_bus);
- if (err)
- goto err_free_bus;
-
- ag71xx_mdio_dump_regs(am);
-
- platform_set_drvdata(pdev, am);
- return 0;
-
-err_free_bus:
- mdiobus_free(am->mii_bus);
-err_iounmap:
- iounmap(am->mdio_base);
-err_free_mdio:
- kfree(am);
-err_out:
- return err;
-}
-
-static int __devexit ag71xx_mdio_remove(struct platform_device *pdev)
-{
- struct ag71xx_mdio *am = platform_get_drvdata(pdev);
-
- if (am) {
- mdiobus_unregister(am->mii_bus);
- mdiobus_free(am->mii_bus);
- iounmap(am->mdio_base);
- kfree(am);
- platform_set_drvdata(pdev, NULL);
- }
-
- return 0;
-}
-
-static struct platform_driver ag71xx_mdio_driver = {
- .probe = ag71xx_mdio_probe,
- .remove = __exit_p(ag71xx_mdio_remove),
- .driver = {
- .name = "ag71xx-mdio",
- }
-};
-
-int __init ag71xx_mdio_driver_init(void)
-{
- return platform_driver_register(&ag71xx_mdio_driver);
-}
-
-void ag71xx_mdio_driver_exit(void)
-{
- platform_driver_unregister(&ag71xx_mdio_driver);
-}
+++ /dev/null
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-static void ag71xx_phy_link_adjust(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
- unsigned long flags;
- int status_change = 0;
-
- spin_lock_irqsave(&ag->lock, flags);
-
- if (phydev->link) {
- if (ag->duplex != phydev->duplex
- || ag->speed != phydev->speed) {
- status_change = 1;
- }
- }
-
- if (phydev->link != ag->link)
- status_change = 1;
-
- ag->link = phydev->link;
- ag->duplex = phydev->duplex;
- ag->speed = phydev->speed;
-
- if (status_change)
- ag71xx_link_adjust(ag);
-
- spin_unlock_irqrestore(&ag->lock, flags);
-}
-
-void ag71xx_phy_start(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- if (ag->phy_dev) {
- phy_start(ag->phy_dev);
- } else if (pdata->switch_data) {
- ag71xx_ar7240_start(ag);
- } else {
- ag->link = 1;
- ag71xx_link_adjust(ag);
- }
-}
-
-void ag71xx_phy_stop(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- unsigned long flags;
-
- if (ag->phy_dev)
- phy_stop(ag->phy_dev);
- else if (pdata->switch_data)
- ag71xx_ar7240_stop(ag);
-
- spin_lock_irqsave(&ag->lock, flags);
- if (ag->link) {
- ag->link = 0;
- ag71xx_link_adjust(ag);
- }
- spin_unlock_irqrestore(&ag->lock, flags);
-}
-
-static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
-{
- struct net_device *dev = ag->dev;
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- int ret = 0;
-
- /* use fixed settings */
- switch (pdata->speed) {
- case SPEED_10:
- case SPEED_100:
- case SPEED_1000:
- break;
- default:
- netdev_err(dev, "invalid speed specified\n");
- ret = -EINVAL;
- break;
- }
-
- netdev_dbg(dev, "using fixed link parameters\n");
-
- ag->duplex = pdata->duplex;
- ag->speed = pdata->speed;
-
- return ret;
-}
-
-static int ag71xx_phy_connect_multi(struct ag71xx *ag)
-{
- struct net_device *dev = ag->dev;
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct phy_device *phydev = NULL;
- int phy_addr;
- int ret = 0;
-
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
- if (!(pdata->phy_mask & (1 << phy_addr)))
- continue;
-
- if (ag->mii_bus->phy_map[phy_addr] == NULL)
- continue;
-
- DBG("%s: PHY found at %s, uid=%08x\n",
- dev->name,
- dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
- ag->mii_bus->phy_map[phy_addr]->phy_id);
-
- if (phydev == NULL)
- phydev = ag->mii_bus->phy_map[phy_addr];
- }
-
- if (!phydev) {
- netdev_err(dev, "no PHY found with phy_mask=%08x\n",
- pdata->phy_mask);
- return -ENODEV;
- }
-
- ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),
- &ag71xx_phy_link_adjust, 0,
- pdata->phy_if_mode);
-
- if (IS_ERR(ag->phy_dev)) {
- netdev_err(dev, "could not connect to PHY at %s\n",
- dev_name(&phydev->dev));
- return PTR_ERR(ag->phy_dev);
- }
-
- /* mask with MAC supported features */
- if (pdata->has_gbit)
- phydev->supported &= PHY_GBIT_FEATURES;
- else
- phydev->supported &= PHY_BASIC_FEATURES;
-
- phydev->advertising = phydev->supported;
-
- netdev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
- dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
-
- ag->link = 0;
- ag->speed = 0;
- ag->duplex = -1;
-
- return ret;
-}
-
-static int dev_is_class(struct device *dev, void *class)
-{
- if (dev->class != NULL && !strcmp(dev->class->name, class))
- return 1;
-
- return 0;
-}
-
-static struct device *dev_find_class(struct device *parent, char *class)
-{
- if (dev_is_class(parent, class)) {
- get_device(parent);
- return parent;
- }
-
- return device_find_child(parent, class, dev_is_class);
-}
-
-static struct mii_bus *dev_to_mii_bus(struct device *dev)
-{
- struct device *d;
-
- d = dev_find_class(dev, "mdio_bus");
- if (d != NULL) {
- struct mii_bus *bus;
-
- bus = to_mii_bus(d);
- put_device(d);
-
- return bus;
- }
-
- return NULL;
-}
-
-int __devinit ag71xx_phy_connect(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- if (pdata->mii_bus_dev == NULL ||
- pdata->mii_bus_dev->bus == NULL )
- return ag71xx_phy_connect_fixed(ag);
-
- ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
- if (ag->mii_bus == NULL) {
- netdev_err(ag->dev, "unable to find MII bus on device '%s'\n",
- dev_name(pdata->mii_bus_dev));
- return -ENODEV;
- }
-
- /* Reset the mdio bus explicitly */
- if (ag->mii_bus->reset) {
- mutex_lock(&ag->mii_bus->mdio_lock);
- ag->mii_bus->reset(ag->mii_bus);
- mutex_unlock(&ag->mii_bus->mdio_lock);
- }
-
- if (pdata->switch_data)
- return ag71xx_ar7240_init(ag);
-
- if (pdata->phy_mask)
- return ag71xx_phy_connect_multi(ag);
-
- return ag71xx_phy_connect_fixed(ag);
-}
-
-void ag71xx_phy_disconnect(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- if (pdata->switch_data)
- ag71xx_ar7240_cleanup(ag);
- else if (ag->phy_dev)
- phy_disconnect(ag->phy_dev);
-}
--- /dev/null
+/*
+ * Atheros AP9X reference board PCI initialization
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath9k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/pci.h>
+
+#include "dev-ap9x-pci.h"
+#include "pci-ath9k-fixup.h"
+#include "pci.h"
+
+static struct ath9k_platform_data ap9x_wmac0_data = {
+ .led_pin = -1,
+};
+static struct ath9k_platform_data ap9x_wmac1_data = {
+ .led_pin = -1,
+};
+static char ap9x_wmac0_mac[6];
+static char ap9x_wmac1_mac[6];
+
+__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.led_pin = pin;
+ break;
+ case 1:
+ ap9x_wmac1_data.led_pin = pin;
+ break;
+ }
+}
+
+__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.gpio_mask = mask;
+ ap9x_wmac0_data.gpio_val = val;
+ break;
+ case 1:
+ ap9x_wmac1_data.gpio_mask = mask;
+ ap9x_wmac1_data.gpio_val = val;
+ break;
+ }
+}
+
+__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
+ int num_leds)
+{
+ switch (wmac) {
+ case 0:
+ ap9x_wmac0_data.leds = leds;
+ ap9x_wmac0_data.num_leds = num_leds;
+ break;
+ case 1:
+ ap9x_wmac1_data.leds = leds;
+ ap9x_wmac1_data.num_leds = num_leds;
+ break;
+ }
+}
+
+static int ap91_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 0:
+ dev->dev.platform_data = &ap9x_wmac0_data;
+ break;
+ }
+
+ return 0;
+}
+
+__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
+{
+ if (cal_data)
+ memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
+ sizeof(ap9x_wmac0_data.eeprom_data));
+
+ if (mac_addr) {
+ memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
+ ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
+ ath79_register_pci();
+
+ pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
+}
+
+static int ap94_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &ap9x_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &ap9x_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+ if (cal_data0)
+ memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
+ sizeof(ap9x_wmac0_data.eeprom_data));
+
+ if (cal_data1)
+ memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
+ sizeof(ap9x_wmac1_data.eeprom_data));
+
+ if (mac_addr0) {
+ memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
+ ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
+ }
+
+ if (mac_addr1) {
+ memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
+ ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
+ ath79_register_pci();
+
+ pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
+ pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
+}
--- /dev/null
+/*
+ * Atheros AP9X reference board PCI initialization
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_AP9X_PCI_H
+#define _ATH79_DEV_AP9X_PCI_H
+
+struct gpio_led;
+
+#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
+void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
+void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
+void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
+ int num_leds);
+
+void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
+void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1);
+
+#else
+static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
+static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
+ u32 mask, u32 val) {}
+static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
+ struct gpio_led *leds,
+ int num_leds) {}
+
+static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
+static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1) {}
+#endif
+
+#endif /* _ATH79_DEV_AP9X_PCI_H */
+
--- /dev/null
+/*
+ * Atheros AR71xx DSA switch device support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+
+static struct platform_device ar71xx_dsa_switch_device = {
+ .name = "dsa",
+ .id = 0,
+};
+
+void __init ath79_register_dsa(struct device *netdev,
+ struct device *miidev,
+ struct dsa_platform_data *d)
+{
+ int i;
+
+ d->netdev = netdev;
+ for (i = 0; i < d->nr_chips; i++)
+ d->chip[i].mii_bus = miidev;
+
+ ar71xx_dsa_switch_device.dev.platform_data = d;
+ platform_device_register(&ar71xx_dsa_switch_device);
+}
--- /dev/null
+/*
+ * Atheros AR71xx DSA switch device support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_DSA_H
+#define _ATH79_DEV_DSA_H
+
+#include <net/dsa.h>
+
+void ath79_register_dsa(struct device *netdev,
+ struct device *miidev,
+ struct dsa_platform_data *d);
+
+#endif /* _ATH79_DEV_DSA_H */
--- /dev/null
+/*
+ * Atheros AR71xx SoC platform devices
+ *
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Parts of this file are based on Atheros 2.6.15 BSP
+ * Parts of this file are based on Atheros 2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/irq.h>
+
+#include "common.h"
+#include "dev-eth.h"
+
+unsigned char ath79_mac_base[ETH_ALEN] __initdata;
+
+static struct resource ath79_mdio0_resources[] = {
+ {
+ .name = "mdio_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE0_BASE,
+ .end = AR71XX_GE0_BASE + 0x200 - 1,
+ }
+};
+
+static struct ag71xx_mdio_platform_data ath79_mdio0_data;
+
+struct platform_device ath79_mdio0_device = {
+ .name = "ag71xx-mdio",
+ .id = 0,
+ .resource = ath79_mdio0_resources,
+ .num_resources = ARRAY_SIZE(ath79_mdio0_resources),
+ .dev = {
+ .platform_data = &ath79_mdio0_data,
+ },
+};
+
+static struct resource ath79_mdio1_resources[] = {
+ {
+ .name = "mdio_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE1_BASE,
+ .end = AR71XX_GE1_BASE + 0x200 - 1,
+ }
+};
+
+static struct ag71xx_mdio_platform_data ath79_mdio1_data;
+
+struct platform_device ath79_mdio1_device = {
+ .name = "ag71xx-mdio",
+ .id = 1,
+ .resource = ath79_mdio1_resources,
+ .num_resources = ARRAY_SIZE(ath79_mdio1_resources),
+ .dev = {
+ .platform_data = &ath79_mdio1_data,
+ },
+};
+
+static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+
+ t = __raw_readl(base + cfg_reg);
+ t &= ~(3 << shift);
+ t |= (2 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ __raw_writel(pll_val, base + pll_reg);
+
+ t |= (3 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ t &= ~(3 << shift);
+ __raw_writel(t, base + cfg_reg);
+ udelay(100);
+
+ printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
+ (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
+
+ iounmap(base);
+}
+
+static void __init ath79_mii_ctrl_set_if(unsigned int reg,
+ unsigned int mii_if)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
+
+ t = __raw_readl(base + reg);
+ t &= ~(AR71XX_MII_CTRL_IF_MASK);
+ t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
+ __raw_writel(t, base + reg);
+
+ iounmap(base);
+}
+
+static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
+{
+ void __iomem *base;
+ unsigned int mii_speed;
+ u32 t;
+
+ switch (speed) {
+ case SPEED_10:
+ mii_speed = AR71XX_MII_CTRL_SPEED_10;
+ break;
+ case SPEED_100:
+ mii_speed = AR71XX_MII_CTRL_SPEED_100;
+ break;
+ case SPEED_1000:
+ mii_speed = AR71XX_MII_CTRL_SPEED_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
+
+ t = __raw_readl(base + reg);
+ t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
+ t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT;
+ __raw_writel(t, base + reg);
+
+ iounmap(base);
+}
+
+void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
+{
+ struct platform_device *mdio_dev;
+ struct ag71xx_mdio_platform_data *mdio_data;
+ unsigned int max_id;
+
+ if (ath79_soc == ATH79_SOC_AR9341 ||
+ ath79_soc == ATH79_SOC_AR9342 ||
+ ath79_soc == ATH79_SOC_AR9344)
+ max_id = 1;
+ else
+ max_id = 0;
+
+ if (id > max_id) {
+ printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
+ return;
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 0) {
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+ } else {
+ mdio_dev = &ath79_mdio1_device;
+ mdio_data = &ath79_mdio1_data;
+ }
+ break;
+
+ case ATH79_SOC_AR7242:
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
+ AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
+ AR71XX_ETH0_PLL_SHIFT);
+ /* fall through */
+ default:
+ mdio_dev = &ath79_mdio0_device;
+ mdio_data = &ath79_mdio0_data;
+ break;
+ }
+
+ mdio_data->phy_mask = phy_mask;
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ mdio_data->is_ar7240 = 1;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 1)
+ mdio_data->is_ar7240 = 1;
+ break;
+
+ default:
+ break;
+ }
+
+ platform_device_register(mdio_dev);
+}
+
+struct ath79_eth_pll_data ath79_eth0_pll_data;
+struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+static u32 ath79_get_eth_pll(unsigned int mac, int speed)
+{
+ struct ath79_eth_pll_data *pll_data;
+ u32 pll_val;
+
+ switch (mac) {
+ case 0:
+ pll_data = &ath79_eth0_pll_data;
+ break;
+ case 1:
+ pll_data = &ath79_eth1_pll_data;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (speed) {
+ case SPEED_10:
+ pll_val = pll_data->pll_10;
+ break;
+ case SPEED_100:
+ pll_val = pll_data->pll_100;
+ break;
+ case SPEED_1000:
+ pll_val = pll_data->pll_1000;
+ break;
+ default:
+ BUG();
+ }
+
+ return pll_val;
+}
+
+static void ath79_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
+ val, AR71XX_ETH0_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
+}
+
+static void ath79_set_speed_ge1(int speed)
+{
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
+ val, AR71XX_ETH1_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
+}
+
+static void ar724x_set_speed_ge0(int speed)
+{
+ /* TODO */
+}
+
+static void ar724x_set_speed_ge1(int speed)
+{
+ /* TODO */
+}
+
+static void ar7242_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+ void __iomem *base;
+
+ base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
+ __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
+ iounmap(base);
+}
+
+static void ar91xx_set_speed_ge0(int speed)
+{
+ u32 val = ath79_get_eth_pll(0, speed);
+
+ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
+ val, AR913X_ETH0_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
+}
+
+static void ar91xx_set_speed_ge1(int speed)
+{
+ u32 val = ath79_get_eth_pll(1, speed);
+
+ ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
+ val, AR913X_ETH1_PLL_SHIFT);
+ ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
+}
+
+static void ar933x_set_speed_ge0(int speed)
+{
+ /* TODO */
+}
+
+static void ar933x_set_speed_ge1(int speed)
+{
+ /* TODO */
+}
+
+static void ar934x_set_speed_ge0(int speed)
+{
+ /* TODO */
+}
+
+static void ar934x_set_speed_ge1(int speed)
+{
+ /* TODO */
+}
+
+static void ath79_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE0);
+}
+
+static void ath79_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR71XX_DDR_REG_FLUSH_GE1);
+}
+
+static void ar724x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar724x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR724X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar91xx_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar91xx_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR913X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar933x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar933x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR933X_DDR_REG_FLUSH_GE1);
+}
+
+static void ar934x_ddr_flush_ge0(void)
+{
+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE0);
+}
+
+static void ar934x_ddr_flush_ge1(void)
+{
+ ath79_ddr_wb_flush(AR934X_DDR_REG_FLUSH_GE1);
+}
+
+static struct resource ath79_eth0_resources[] = {
+ {
+ .name = "mac_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE0_BASE,
+ .end = AR71XX_GE0_BASE + 0x200 - 1,
+ }, {
+ .name = "mac_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = ATH79_CPU_IRQ_GE0,
+ .end = ATH79_CPU_IRQ_GE0,
+ },
+};
+
+struct ag71xx_platform_data ath79_eth0_data = {
+ .reset_bit = AR71XX_RESET_GE0_MAC,
+};
+
+struct platform_device ath79_eth0_device = {
+ .name = "ag71xx",
+ .id = 0,
+ .resource = ath79_eth0_resources,
+ .num_resources = ARRAY_SIZE(ath79_eth0_resources),
+ .dev = {
+ .platform_data = &ath79_eth0_data,
+ },
+};
+
+static struct resource ath79_eth1_resources[] = {
+ {
+ .name = "mac_base",
+ .flags = IORESOURCE_MEM,
+ .start = AR71XX_GE1_BASE,
+ .end = AR71XX_GE1_BASE + 0x200 - 1,
+ }, {
+ .name = "mac_irq",
+ .flags = IORESOURCE_IRQ,
+ .start = ATH79_CPU_IRQ_GE1,
+ .end = ATH79_CPU_IRQ_GE1,
+ },
+};
+
+struct ag71xx_platform_data ath79_eth1_data = {
+ .reset_bit = AR71XX_RESET_GE1_MAC,
+};
+
+struct platform_device ath79_eth1_device = {
+ .name = "ag71xx",
+ .id = 1,
+ .resource = ath79_eth1_resources,
+ .num_resources = ARRAY_SIZE(ath79_eth1_resources),
+ .dev = {
+ .platform_data = &ath79_eth1_data,
+ },
+};
+
+struct ag71xx_switch_platform_data ath79_switch_data;
+
+#define AR71XX_PLL_VAL_1000 0x00110000
+#define AR71XX_PLL_VAL_100 0x00001099
+#define AR71XX_PLL_VAL_10 0x00991099
+
+#define AR724X_PLL_VAL_1000 0x00110000
+#define AR724X_PLL_VAL_100 0x00001099
+#define AR724X_PLL_VAL_10 0x00991099
+
+#define AR7242_PLL_VAL_1000 0x16000000
+#define AR7242_PLL_VAL_100 0x00000101
+#define AR7242_PLL_VAL_10 0x00001616
+
+#define AR913X_PLL_VAL_1000 0x1a000000
+#define AR913X_PLL_VAL_100 0x13000a44
+#define AR913X_PLL_VAL_10 0x00441099
+
+#define AR933X_PLL_VAL_1000 0x00110000
+#define AR933X_PLL_VAL_100 0x00001099
+#define AR933X_PLL_VAL_10 0x00991099
+
+#define AR934X_PLL_VAL_1000 0x00110000
+#define AR934X_PLL_VAL_100 0x00001099
+#define AR934X_PLL_VAL_10 0x00991099
+
+static void __init ath79_init_eth_pll_data(unsigned int id)
+{
+ struct ath79_eth_pll_data *pll_data;
+ u32 pll_10, pll_100, pll_1000;
+
+ switch (id) {
+ case 0:
+ pll_data = &ath79_eth0_pll_data;
+ break;
+ case 1:
+ pll_data = &ath79_eth1_pll_data;
+ break;
+ default:
+ BUG();
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ pll_10 = AR71XX_PLL_VAL_10;
+ pll_100 = AR71XX_PLL_VAL_100;
+ pll_1000 = AR71XX_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ pll_10 = AR724X_PLL_VAL_10;
+ pll_100 = AR724X_PLL_VAL_100;
+ pll_1000 = AR724X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR7242:
+ pll_10 = AR7242_PLL_VAL_10;
+ pll_100 = AR7242_PLL_VAL_100;
+ pll_1000 = AR7242_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ pll_10 = AR913X_PLL_VAL_10;
+ pll_100 = AR913X_PLL_VAL_100;
+ pll_1000 = AR913X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pll_10 = AR933X_PLL_VAL_10;
+ pll_100 = AR933X_PLL_VAL_100;
+ pll_1000 = AR933X_PLL_VAL_1000;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ pll_10 = AR934X_PLL_VAL_10;
+ pll_100 = AR934X_PLL_VAL_100;
+ pll_1000 = AR934X_PLL_VAL_1000;
+ break;
+
+ default:
+ BUG();
+ }
+
+ if (!pll_data->pll_10)
+ pll_data->pll_10 = pll_10;
+
+ if (!pll_data->pll_100)
+ pll_data->pll_100 = pll_100;
+
+ if (!pll_data->pll_1000)
+ pll_data->pll_1000 = pll_1000;
+}
+
+static int __init ath79_setup_phy_if_mode(unsigned int id,
+ struct ag71xx_platform_data *pdata)
+{
+ unsigned int mii_if;
+
+ switch (id) {
+ case 0:
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ mii_if = AR71XX_MII0_CTRL_IF_MII;
+ break;
+ case PHY_INTERFACE_MODE_GMII:
+ mii_if = AR71XX_MII0_CTRL_IF_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ mii_if = AR71XX_MII0_CTRL_IF_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ mii_if = AR71XX_MII0_CTRL_IF_RMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
+ break;
+
+ case ATH79_SOC_AR7242:
+ /* FIXME */
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ BUG();
+ }
+ break;
+ case 1:
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ case ATH79_SOC_AR9130:
+ case ATH79_SOC_AR9132:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_RMII:
+ mii_if = AR71XX_MII1_CTRL_IF_RMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ mii_if = AR71XX_MII1_CTRL_IF_RGMII;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
+ break;
+
+ case ATH79_SOC_AR7240:
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ break;
+
+ case ATH79_SOC_AR7242:
+ /* FIXME */
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+
+ default:
+ BUG();
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int ath79_eth_instance __initdata;
+void __init ath79_register_eth(unsigned int id)
+{
+ struct platform_device *pdev;
+ struct ag71xx_platform_data *pdata;
+ int err;
+
+ if (id > 1) {
+ printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
+ return;
+ }
+
+ ath79_init_eth_pll_data(id);
+
+ if (id == 0)
+ pdev = &ath79_eth0_device;
+ else
+ pdev = &ath79_eth1_device;
+
+ pdata = pdev->dev.platform_data;
+
+ err = ath79_setup_phy_if_mode(id, pdata);
+ if (err) {
+ printk(KERN_ERR
+ "ar71xx: invalid PHY interface mode for GE%u\n", id);
+ return;
+ }
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7130:
+ if (id == 0) {
+ pdata->ddr_flush = ath79_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ath79_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_ge1;
+ }
+ break;
+
+ case ATH79_SOC_AR7141:
+ case ATH79_SOC_AR7161:
+ if (id == 0) {
+ pdata->ddr_flush = ath79_ddr_flush_ge0;
+ pdata->set_speed = ath79_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ath79_ddr_flush_ge1;
+ pdata->set_speed = ath79_set_speed_ge1;
+ }
+ pdata->has_gbit = 1;
+ break;
+
+ case ATH79_SOC_AR7242:
+ if (id == 0) {
+ pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
+ AR71XX_RESET_GE0_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge0;
+ pdata->set_speed = ar7242_set_speed_ge0;
+ } else {
+ pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
+ AR71XX_RESET_GE1_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge1;
+ pdata->set_speed = ar724x_set_speed_ge1;
+ }
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR7241:
+ if (id == 0)
+ pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
+ else
+ pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
+ /* fall through */
+ case ATH79_SOC_AR7240:
+ if (id == 0) {
+ pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge0;
+ pdata->set_speed = ar724x_set_speed_ge0;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
+ pdata->ddr_flush = ar724x_ddr_flush_ge1;
+ pdata->set_speed = ar724x_set_speed_ge1;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+ }
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+ if (ath79_soc == ATH79_SOC_AR7240)
+ pdata->is_ar7240 = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR9130:
+ if (id == 0) {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
+ pdata->set_speed = ar91xx_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
+ pdata->set_speed = ar91xx_set_speed_ge1;
+ }
+ pdata->is_ar91xx = 1;
+ break;
+
+ case ATH79_SOC_AR9132:
+ if (id == 0) {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge0;
+ pdata->set_speed = ar91xx_set_speed_ge0;
+ } else {
+ pdata->ddr_flush = ar91xx_ddr_flush_ge1;
+ pdata->set_speed = ar91xx_set_speed_ge1;
+ }
+ pdata->is_ar91xx = 1;
+ pdata->has_gbit = 1;
+ break;
+
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ if (id == 0) {
+ pdata->reset_bit = AR933X_RESET_GE0_MAC |
+ AR933X_RESET_GE0_MDIO;
+ pdata->ddr_flush = ar933x_ddr_flush_ge0;
+ pdata->set_speed = ar933x_set_speed_ge0;
+
+ pdata->phy_mask = BIT(4);
+ } else {
+ pdata->reset_bit = AR933X_RESET_GE1_MAC |
+ AR933X_RESET_GE1_MDIO;
+ pdata->ddr_flush = ar933x_ddr_flush_ge1;
+ pdata->set_speed = ar933x_set_speed_ge1;
+
+ pdata->speed = SPEED_1000;
+ pdata->duplex = DUPLEX_FULL;
+ pdata->switch_data = &ath79_switch_data;
+ }
+
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 0) {
+ pdata->reset_bit = AR934X_RESET_GE0_MAC |
+ AR934X_RESET_GE0_MDIO;
+ pdata->ddr_flush =ar934x_ddr_flush_ge0;
+ pdata->set_speed = ar934x_set_speed_ge0;
+ } else {
+ pdata->reset_bit = AR934X_RESET_GE1_MAC |
+ AR934X_RESET_GE1_MDIO;
+ pdata->ddr_flush = ar934x_ddr_flush_ge1;
+ pdata->set_speed = ar934x_set_speed_ge1;
+
+ pdata->switch_data = &ath79_switch_data;
+ }
+
+ pdata->has_gbit = 1;
+ pdata->is_ar724x = 1;
+
+ if (!pdata->fifo_cfg1)
+ pdata->fifo_cfg1 = 0x0010ffff;
+ if (!pdata->fifo_cfg2)
+ pdata->fifo_cfg2 = 0x015500aa;
+ if (!pdata->fifo_cfg3)
+ pdata->fifo_cfg3 = 0x01f00140;
+ break;
+
+ default:
+ BUG();
+ }
+
+ switch (pdata->phy_if_mode) {
+ case PHY_INTERFACE_MODE_GMII:
+ case PHY_INTERFACE_MODE_RGMII:
+ if (!pdata->has_gbit) {
+ printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
+ id);
+ return;
+ }
+ /* fallthrough */
+ default:
+ break;
+ }
+
+ if (!is_valid_ether_addr(pdata->mac_addr)) {
+ random_ether_addr(pdata->mac_addr);
+ printk(KERN_DEBUG
+ "ar71xx: using random MAC address for eth%d\n",
+ ath79_eth_instance);
+ }
+
+ if (pdata->mii_bus_dev == NULL) {
+ switch (ath79_soc) {
+ case ATH79_SOC_AR9341:
+ case ATH79_SOC_AR9342:
+ case ATH79_SOC_AR9344:
+ if (id == 0)
+ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
+ else
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
+
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR9330:
+ case ATH79_SOC_AR9331:
+ pdata->mii_bus_dev = &ath79_mdio1_device.dev;
+ break;
+
+ default:
+ pdata->mii_bus_dev = &ath79_mdio0_device.dev;
+ break;
+ }
+ }
+
+ /* Reset the device */
+ ath79_device_reset_set(pdata->reset_bit);
+ mdelay(100);
+
+ ath79_device_reset_clear(pdata->reset_bit);
+ mdelay(100);
+
+ platform_device_register(pdev);
+ ath79_eth_instance++;
+}
+
+void __init ath79_set_mac_base(unsigned char *mac)
+{
+ memcpy(ath79_mac_base, mac, ETH_ALEN);
+}
+
+void __init ath79_parse_mac_addr(char *mac_str)
+{
+ u8 tmp[ETH_ALEN];
+ int t;
+
+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
+
+ if (t != ETH_ALEN)
+ t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
+ &tmp[0], &tmp[1], &tmp[2], &tmp[3], &tmp[4], &tmp[5]);
+
+ if (t == ETH_ALEN)
+ ath79_set_mac_base(tmp);
+ else
+ printk(KERN_DEBUG "ar71xx: failed to parse mac address "
+ "\"%s\"\n", mac_str);
+}
+
+static int __init ath79_ethaddr_setup(char *str)
+{
+ ath79_parse_mac_addr(str);
+ return 1;
+}
+__setup("ethaddr=", ath79_ethaddr_setup);
+
+static int __init ath79_kmac_setup(char *str)
+{
+ ath79_parse_mac_addr(str);
+ return 1;
+}
+__setup("kmac=", ath79_kmac_setup);
+
+void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
+ int offset)
+{
+ int t;
+
+ if (!is_valid_ether_addr(src)) {
+ memset(dst, '\0', ETH_ALEN);
+ return;
+ }
+
+ t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
+ t += offset;
+
+ dst[0] = src[0];
+ dst[1] = src[1];
+ dst[2] = src[2];
+ dst[3] = (t >> 16) & 0xff;
+ dst[4] = (t >> 8) & 0xff;
+ dst[5] = t & 0xff;
+}
+
+void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
+{
+ int i;
+
+ if (!is_valid_ether_addr(src)) {
+ memset(dst, '\0', ETH_ALEN);
+ return;
+ }
+
+ for (i = 0; i < ETH_ALEN; i++)
+ dst[i] = src[i];
+ dst[0] |= 0x02;
+}
--- /dev/null
+/*
+ * Atheros AR71xx SoC device definitions
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_ETH_H
+#define _ATH79_DEV_ETH_H
+
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+struct platform_device;
+
+extern unsigned char ath79_mac_base[] __initdata;
+void ath79_parse_mac_addr(char *mac_str);
+void ath79_init_mac(unsigned char *dst, const unsigned char *src,
+ int offset);
+void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
+
+struct ath79_eth_pll_data {
+ u32 pll_10;
+ u32 pll_100;
+ u32 pll_1000;
+};
+
+extern struct ath79_eth_pll_data ath79_eth0_pll_data;
+extern struct ath79_eth_pll_data ath79_eth1_pll_data;
+
+extern struct ag71xx_platform_data ath79_eth0_data;
+extern struct ag71xx_platform_data ath79_eth1_data;
+extern struct platform_device ath79_eth0_device;
+extern struct platform_device ath79_eth1_device;
+void ath79_register_eth(unsigned int id);
+
+extern struct ag71xx_switch_platform_data ath79_switch_data;
+
+extern struct platform_device ath79_mdio0_device;
+extern struct platform_device ath79_mdio1_device;
+void ath79_register_mdio(unsigned int id, u32 phy_mask);
+
+#endif /* _ATH79_DEV_ETH_H */
--- /dev/null
+/*
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/concat.h>
+
+#include "dev-spi.h"
+#include "dev-m25p80.h"
+
+static struct ath79_spi_controller_data ath79_spi0_cdata =
+{
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
+static struct ath79_spi_controller_data ath79_spi1_cdata =
+{
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 1,
+};
+
+static struct spi_board_info ath79_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ath79_spi0_cdata,
+ },
+ {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ath79_spi1_cdata,
+ }
+};
+
+static struct ath79_spi_platform_data ath79_spi_data;
+
+void __init ath79_register_m25p80(struct flash_platform_data *pdata)
+{
+ ath79_spi_data.bus_num = 0;
+ ath79_spi_data.num_chipselect = 1;
+ ath79_spi_info[0].platform_data = pdata;
+ ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
+}
+
+static struct flash_platform_data *multi_pdata;
+
+static struct mtd_info *concat_devs[2] = { NULL, NULL };
+static struct work_struct mtd_concat_work;
+
+static void mtd_concat_add_work(struct work_struct *work)
+{
+ struct mtd_info *mtd;
+
+ mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
+
+ mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
+}
+
+static void mtd_concat_add(struct mtd_info *mtd)
+{
+ static bool registered = false;
+
+ if (registered)
+ return;
+
+ if (!strcmp(mtd->name, "spi0.0"))
+ concat_devs[0] = mtd;
+ else if (!strcmp(mtd->name, "spi0.1"))
+ concat_devs[1] = mtd;
+ else
+ return;
+
+ if (!concat_devs[0] || !concat_devs[1])
+ return;
+
+ registered = true;
+ INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
+ schedule_work(&mtd_concat_work);
+}
+
+static void mtd_concat_remove(struct mtd_info *mtd)
+{
+}
+
+static void add_mtd_concat_notifier(void)
+{
+ static struct mtd_notifier not = {
+ .add = mtd_concat_add,
+ .remove = mtd_concat_remove,
+ };
+
+ register_mtd_user(¬);
+}
+
+
+void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
+{
+ multi_pdata = pdata;
+ add_mtd_concat_notifier();
+ ath79_spi_data.bus_num = 0;
+ ath79_spi_data.num_chipselect = 2;
+ ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
+}
--- /dev/null
+/*
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_DEV_M25P80_H
+#define _ATH79_DEV_M25P80_H
+
+#include <linux/spi/flash.h>
+
+void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
+void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
+
+#endif /* _ATH79_DEV_M25P80_H */
--- /dev/null
+/*
+ * ALFA Network AP96 board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define ALFA_AP96_GPIO_PCIE_RESET 2
+#define ALFA_AP96_GPIO_SIM_DETECT 3
+#define ALFA_AP96_GPIO_MICROSD_CD 4
+#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
+
+#define ALFA_AP96_GPIO_BUTTON_RESET 11
+
+#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ }
+};
+
+static int alfa_ap96_mmc_get_cd(struct device *dev)
+{
+ return !gpio_get_value(ALFA_AP96_GPIO_MICROSD_CD);
+}
+
+static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
+ .get_cd = alfa_ap96_mmc_get_cd,
+ .caps = MMC_CAP_NEEDS_POLL,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct ath79_spi_controller_data ap96_spi0_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 0,
+};
+
+static struct ath79_spi_controller_data ap96_spi1_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 1,
+};
+
+static struct ath79_spi_controller_data ap96_spi2_cdata = {
+ .cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
+ .cs_line = 2,
+};
+
+static struct spi_board_info alfa_ap96_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .controller_data = &ap96_spi0_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &alfa_ap96_mmc_data,
+ .controller_data = &ap96_spi1_cdata
+ }, {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 6250000,
+ .modalias = "rtc-pcf2123",
+ .controller_data = &ap96_spi2_cdata
+ },
+};
+
+static struct ath79_spi_platform_data alfa_ap96_spi_data = {
+ .bus_num = 0,
+ .num_chipselect = 3,
+};
+
+static void __init alfa_ap96_gpio_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
+ gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
+ gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
+ gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
+ gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
+ gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
+}
+
+#define ALFA_AP96_WAN_PHYMASK BIT(4)
+#define ALFA_AP96_LAN_PHYMASK BIT(5)
+#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
+
+static void __init alfa_ap96_init(void)
+{
+ alfa_ap96_gpio_setup();
+
+ ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
+ ath79_eth1_pll_data.pll_1000 = 0x110000;
+
+ ath79_register_eth(1);
+
+ ath79_register_pci();
+ ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
+ ARRAY_SIZE(alfa_ap96_spi_info));
+
+ ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(alfa_ap96_gpio_keys),
+ alfa_ap96_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
+ alfa_ap96_init);
--- /dev/null
+/*
+ * ALFA Network N2/N5 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define ALFA_NX_GPIO_LED_2 17
+#define ALFA_NX_GPIO_LED_3 16
+#define ALFA_NX_GPIO_LED_5 12
+#define ALFA_NX_GPIO_LED_6 8
+#define ALFA_NX_GPIO_LED_7 6
+#define ALFA_NX_GPIO_LED_8 7
+
+#define ALFA_NX_GPIO_BTN_RESET 11
+
+#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
+
+#define ALFA_NX_MAC0_OFFSET 0
+#define ALFA_NX_MAC1_OFFSET 6
+#define ALFA_NX_CALDATA_OFFSET 0x1000
+
+static struct mtd_partition alfa_nx_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x600000,
+ }, {
+ .name = "kernel",
+ .offset = 0x650000,
+ .size = 0x190000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x780000,
+ }
+};
+
+static struct flash_platform_data alfa_nx_flash_data = {
+ .parts = alfa_nx_partitions,
+ .nr_parts = ARRAY_SIZE(alfa_nx_partitions),
+};
+
+static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALFA_NX_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
+ {
+ .name = "alfa:green:led_2",
+ .gpio = ALFA_NX_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_3",
+ .gpio = ALFA_NX_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "alfa:red:led_5",
+ .gpio = ALFA_NX_GPIO_LED_5,
+ .active_low = 1,
+ }, {
+ .name = "alfa:amber:led_6",
+ .gpio = ALFA_NX_GPIO_LED_6,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_7",
+ .gpio = ALFA_NX_GPIO_LED_7,
+ .active_low = 1,
+ }, {
+ .name = "alfa:green:led_8",
+ .gpio = ALFA_NX_GPIO_LED_8,
+ .active_low = 1,
+ }
+};
+
+static void __init alfa_nx_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(&alfa_nx_flash_data);
+
+ ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
+ alfa_nx_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(alfa_nx_gpio_keys),
+ alfa_nx_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + ALFA_NX_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + ALFA_NX_MAC1_OFFSET, 0);
+
+ /* WAN port */
+ ath79_register_eth(0);
+ /* LAN port */
+ ath79_register_eth(1);
+
+ ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
+ alfa_nx_setup);
--- /dev/null
+/*
+ * Allnet ALL0258N support
+ *
+ * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+/* found via /sys/gpio/... try and error */
+#define ALL0258N_GPIO_BTN_RESET 1
+#define ALL0258N_GPIO_LED_RSSIHIGH 13
+#define ALL0258N_GPIO_LED_RSSIMEDIUM 15
+#define ALL0258N_GPIO_LED_RSSILOW 14
+
+/* defaults taken from others machs */
+#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
+
+/* showed up in the original firmware's bootlog */
+#define ALL0258N_SEC_PHYMASK BIT(3)
+
+/*
+ * from U-Boot bootargs of original firmware:
+ * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),320k(custom),1024k(kernel),4928k(rootfs),1536k(failsafe),64k(ART)
+ * we use a more OpenWrt-friendly layout now:
+ * mtdparts=ar7240-nor0:256k(u-boot),64k(u-boot-env),896k(kernel),5376k(rootfs),1536k(failsafe),64k(ART)
+ */
+static struct mtd_partition all0258n_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x050000,
+ .size = 0x0E0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x130000,
+ .size = 0x540000,
+ }, {
+ .name = "failsafe",
+ .offset = 0x670000,
+ .size = 0x180000,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x620000,
+ }, {
+ .name = "art",
+ .offset = 0x7F0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data all0258n_flash_data = {
+ .parts = all0258n_partitions,
+ .nr_parts = ARRAY_SIZE(all0258n_partitions),
+};
+
+static struct gpio_led all0258n_leds_gpio[] __initdata = {
+ {
+ .name = "all0258n:green:rssihigh",
+ .gpio = ALL0258N_GPIO_LED_RSSIHIGH,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:yellow:rssimedium",
+ .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "all0258n:red:rssilow",
+ .gpio = ALL0258N_GPIO_LED_RSSILOW,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ALL0258N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init all0258n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000);
+
+ ath79_register_m25p80(&all0258n_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
+ all0258n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(all0258n_gpio_keys),
+ all0258n_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
+ all0258n_setup);
--- /dev/null
+/*
+ * Atheros AP113 board support
+ *
+ * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/flash.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "pci.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP113_GPIO_LED_USB 0
+#define AP113_GPIO_LED_STATUS 1
+#define AP113_GPIO_LED_ST 11
+
+#define AP113_GPIO_BTN_JUMPSTART 12
+
+#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition ap113_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "rootfs",
+ .offset = 0x010000,
+ .size = 0x300000,
+ },
+ {
+ .name = "uImage",
+ .offset = 0x300000,
+ .size = 0x3e0000,
+ },
+ {
+ .name = "NVRAM",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ },
+ {
+ .name = "ART",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+#define ap113_nr_parts ARRAY_SIZE(ap113_parts)
+
+static struct flash_platform_data ap113_flash_data = {
+ .parts = ap113_parts,
+ .nr_parts = ap113_nr_parts,
+};
+
+static struct gpio_led ap113_leds_gpio[] __initdata = {
+ {
+ .name = "ap113:green:usb",
+ .gpio = AP113_GPIO_LED_USB,
+ .active_low = 1,
+ },
+ {
+ .name = "ap113:green:status",
+ .gpio = AP113_GPIO_LED_STATUS,
+ .active_low = 1,
+ },
+ {
+ .name = "ap113:green:st",
+ .gpio = AP113_GPIO_LED_ST,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
+ {
+ .desc = "jumpstart button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP113_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ },
+};
+
+static void __init ap113_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&ap113_flash_data);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap113_gpio_keys),
+ ap113_gpio_keys);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
+ ap113_leds_gpio);
+
+ ath79_register_pci();
+
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
+ ap113_setup);
--- /dev/null
+/*
+ * Atheros AP83 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/vsc7385.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define AP83_GPIO_LED_WLAN 6
+#define AP83_GPIO_LED_POWER 14
+#define AP83_GPIO_LED_JUMPSTART 15
+#define AP83_GPIO_BTN_JUMPSTART 12
+#define AP83_GPIO_BTN_RESET 21
+
+#define AP83_050_GPIO_VSC7385_CS 1
+#define AP83_050_GPIO_VSC7385_MISO 3
+#define AP83_050_GPIO_VSC7385_MOSI 16
+#define AP83_050_GPIO_VSC7385_SCK 17
+
+#define AP83_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP83_KEYS_DEBOUNCE_INTERVAL (3 * AP83_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition ap83_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x060000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x1a0000,
+ .size = 0x650000,
+ }, {
+ .name = "art",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x060000,
+ .size = 0x790000,
+ }
+};
+
+static struct physmap_flash_data ap83_flash_data = {
+ .width = 2,
+ .parts = ap83_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ap83_flash_partitions),
+};
+
+static struct resource ap83_flash_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_flash_device = {
+ .name = "ar91xx-flash",
+ .id = -1,
+ .resource = ap83_flash_resources,
+ .num_resources = ARRAY_SIZE(ap83_flash_resources),
+ .dev = {
+ .platform_data = &ap83_flash_data,
+ }
+};
+
+static struct gpio_led ap83_leds_gpio[] __initdata = {
+ {
+ .name = "ap83:green:jumpstart",
+ .gpio = AP83_GPIO_LED_JUMPSTART,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:power",
+ .gpio = AP83_GPIO_LED_POWER,
+ .active_low = 0,
+ }, {
+ .name = "ap83:green:wlan",
+ .gpio = AP83_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button ap83_gpio_keys[] __initdata = {
+ {
+ .desc = "soft_reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP83_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "jumpstart",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP83_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP83_GPIO_BTN_JUMPSTART,
+ .active_low = 1,
+ }
+};
+
+static struct resource ap83_040_spi_resources[] = {
+ [0] = {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device ap83_040_spi_device = {
+ .name = "ap83-spi",
+ .id = 0,
+ .resource = ap83_040_spi_resources,
+ .num_resources = ARRAY_SIZE(ap83_040_spi_resources),
+};
+
+static struct spi_gpio_platform_data ap83_050_spi_data = {
+ .miso = AP83_050_GPIO_VSC7385_MISO,
+ .mosi = AP83_050_GPIO_VSC7385_MOSI,
+ .sck = AP83_050_GPIO_VSC7385_SCK,
+ .num_chipselect = 1,
+};
+
+static struct platform_device ap83_050_spi_device = {
+ .name = "spi_gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ap83_050_spi_data,
+ }
+};
+
+static void ap83_vsc7385_reset(void)
+{
+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
+ udelay(10);
+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
+ mdelay(50);
+}
+
+static struct vsc7385_platform_data ap83_vsc7385_data = {
+ .reset = ap83_vsc7385_reset,
+ .ucode_name = "vsc7385_ucode_ap83.bin",
+ .mac_cfg = {
+ .tx_ipg = 6,
+ .bit2 = 0,
+ .clk_sel = 3,
+ },
+};
+
+static struct spi_board_info ap83_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-vsc7385",
+ .platform_data = &ap83_vsc7385_data,
+ .controller_data = (void *) AP83_050_GPIO_VSC7385_CS,
+ }
+};
+
+static void __init ap83_generic_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0xfffffffe);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = 0x1;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_eth1_pll_data.pll_1000 = 0x1f000000;
+
+ ath79_register_eth(1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap83_leds_gpio),
+ ap83_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP83_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap83_gpio_keys),
+ ap83_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_wmac(eeprom, NULL);
+
+ platform_device_register(&ap83_flash_device);
+
+ spi_register_board_info(ap83_spi_info, ARRAY_SIZE(ap83_spi_info));
+}
+
+static void ap83_040_flash_lock(struct platform_device *pdev)
+{
+ ath79_flash_acquire();
+}
+
+static void ap83_040_flash_unlock(struct platform_device *pdev)
+{
+ ath79_flash_release();
+}
+
+static void __init ap83_040_setup(void)
+{
+ ap83_flash_data.lock = ap83_040_flash_lock;
+ ap83_flash_data.unlock = ap83_040_flash_unlock;
+ ap83_generic_setup();
+ platform_device_register(&ap83_040_spi_device);
+}
+
+static void __init ap83_050_setup(void)
+{
+ ap83_generic_setup();
+ platform_device_register(&ap83_050_spi_device);
+}
+
+static void __init ap83_setup(void)
+{
+ u8 *board_id = (u8 *) KSEG1ADDR(0x1fff1244);
+ unsigned int board_version;
+
+ board_version = (unsigned int)(board_id[0] - '0');
+ board_version += ((unsigned int)(board_id[1] - '0')) * 10;
+
+ switch (board_version) {
+ case 40:
+ ap83_040_setup();
+ break;
+ case 50:
+ ap83_050_setup();
+ break;
+ default:
+ printk(KERN_WARNING "AP83-%03u board is not yet supported\n",
+ board_version);
+ }
+}
+
+MIPS_MACHINE(ATH79_MACH_AP83, "AP83", "Atheros AP83", ap83_setup);
--- /dev/null
+/*
+ * Atheros AP96 board support
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP96_GPIO_LED_12_GREEN 0
+#define AP96_GPIO_LED_3_GREEN 1
+#define AP96_GPIO_LED_2_GREEN 2
+#define AP96_GPIO_LED_WPS_GREEN 4
+#define AP96_GPIO_LED_5_GREEN 5
+#define AP96_GPIO_LED_4_ORANGE 6
+
+/* Reset button - next to the power connector */
+#define AP96_GPIO_BTN_RESET 3
+/* WPS button - next to a led on right */
+#define AP96_GPIO_BTN_WPS 8
+
+#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL)
+
+#define AP96_WMAC0_MAC_OFFSET 0x120c
+#define AP96_WMAC1_MAC_OFFSET 0x520c
+#define AP96_CALDATA0_OFFSET 0x1000
+#define AP96_CALDATA1_OFFSET 0x5000
+
+static struct mtd_partition ap96_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "env",
+ .offset = 0x030000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "rootfs",
+ .offset = 0x040000,
+ .size = 0x600000,
+ }, {
+ .name = "uImage",
+ .offset = 0x640000,
+ .size = 0x1b0000,
+ }, {
+ .name = "caldata",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data ap96_flash_data = {
+ .parts = ap96_partitions,
+ .nr_parts = ARRAY_SIZE(ap96_partitions),
+};
+
+/*
+ * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
+ * below (from left to right on the board). Led 1 seems to be on whenever the
+ * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
+ * others are green.
+ *
+ * In addition, there is one led next to a button on the right side for WPS.
+ */
+static struct gpio_led ap96_leds_gpio[] __initdata = {
+ {
+ .name = "ap96:green:led2",
+ .gpio = AP96_GPIO_LED_2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led3",
+ .gpio = AP96_GPIO_LED_3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:orange:led4",
+ .gpio = AP96_GPIO_LED_4_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led5",
+ .gpio = AP96_GPIO_LED_5_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "ap96:green:led12",
+ .gpio = AP96_GPIO_LED_12_GREEN,
+ .active_low = 1,
+ }, { /* next to a button on right */
+ .name = "ap96:green:wps",
+ .gpio = AP96_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP96_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AP96_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+#define AP96_WAN_PHYMASK 0x10
+#define AP96_LAN_PHYMASK 0x0f
+
+static void __init ap96_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
+
+ ath79_eth1_pll_data.pll_1000 = 0x1f000000;
+
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(&ap96_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
+ ap96_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ap96_gpio_keys),
+ ap96_gpio_keys);
+
+ ap94_pci_init(art + AP96_CALDATA0_OFFSET,
+ art + AP96_WMAC0_MAC_OFFSET,
+ art + AP96_CALDATA1_OFFSET,
+ art + AP96_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
--- /dev/null
+/*
+ * AzureWave AW-NR580 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define AW_NR580_GPIO_LED_READY_RED 0
+#define AW_NR580_GPIO_LED_WLAN 1
+#define AW_NR580_GPIO_LED_READY_GREEN 2
+#define AW_NR580_GPIO_LED_WPS_GREEN 4
+#define AW_NR580_GPIO_LED_WPS_AMBER 5
+
+#define AW_NR580_GPIO_BTN_WPS 3
+#define AW_NR580_GPIO_BTN_RESET 11
+
+#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */
+#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL)
+
+static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
+ {
+ .name = "aw-nr580:red:ready",
+ .gpio = AW_NR580_GPIO_LED_READY_RED,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:ready",
+ .gpio = AW_NR580_GPIO_LED_READY_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:wps",
+ .gpio = AW_NR580_GPIO_LED_WPS_GREEN,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:amber:wps",
+ .gpio = AW_NR580_GPIO_LED_WPS_AMBER,
+ .active_low = 0,
+ }, {
+ .name = "aw-nr580:green:wlan",
+ .gpio = AW_NR580_GPIO_LED_WLAN,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AW_NR580_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = AW_NR580_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static const char *aw_nr580_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data aw_nr580_flash_data = {
+ .part_probes = aw_nr580_part_probes,
+};
+
+static void __init aw_nr580_setup(void)
+{
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+
+ ath79_register_pci();
+
+ ath79_register_m25p80(&aw_nr580_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
+ aw_nr580_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(aw_nr580_gpio_keys),
+ aw_nr580_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
+ aw_nr580_setup);
--- /dev/null
+/*
+ * D-Link DIR-600 rev. A1 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_600_A1_GPIO_LED_WPS 0
+#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
+#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
+#define DIR_600_A1_GPIO_LED_LAN1 13
+#define DIR_600_A1_GPIO_LED_LAN2 14
+#define DIR_600_A1_GPIO_LED_LAN3 15
+#define DIR_600_A1_GPIO_LED_LAN4 16
+#define DIR_600_A1_GPIO_LED_WAN_AMBER 7
+#define DIR_600_A1_GPIO_LED_WAN_GREEN 17
+
+#define DIR_600_A1_GPIO_BTN_RESET 8
+#define DIR_600_A1_GPIO_BTN_WPS 12
+
+#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
+
+#define DIR_600_A1_NVRAM_ADDR 0x1f030000
+#define DIR_600_A1_NVRAM_SIZE 0x10000
+
+static struct mtd_partition dir_600_a1_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "nvram",
+ .offset = 0x030000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "mac",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+
+static struct flash_platform_data dir_600_a1_flash_data = {
+ .parts = dir_600_a1_partitions,
+ .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
+};
+
+static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:green:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
+ }, {
+ .name = "d-link:amber:power",
+ .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
+ }, {
+ .name = "d-link:amber:wan",
+ .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan1",
+ .gpio = DIR_600_A1_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan2",
+ .gpio = DIR_600_A1_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan3",
+ .gpio = DIR_600_A1_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:lan4",
+ .gpio = DIR_600_A1_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_600_A1_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_600_A1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_600_A1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init dir_600_a1_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac_buff[6];
+ u8 *mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
+ "lan_mac=", mac_buff) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
+ mac = mac_buff;
+ }
+
+ ath79_register_m25p80(&dir_600_a1_flash_data);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
+ dir_600_a1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_600_a1_gpio_keys),
+ dir_600_a1_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
+ dir_600_a1_setup);
+
+static void __init dir_615_e4_setup(void)
+{
+ dir_600_a1_setup();
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
+ dir_615_e4_setup);
--- /dev/null
+/*
+ * D-Link DIR-615 rev C1 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
+#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
+#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
+#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
+#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
+
+/* buttons may need refinement */
+
+#define DIR_615C1_GPIO_BTN_WPS 12
+#define DIR_615C1_GPIO_BTN_RESET 21
+
+#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
+
+#define DIR_615C1_CONFIG_ADDR 0x1f020000
+#define DIR_615C1_CONFIG_SIZE 0x10000
+
+static struct mtd_partition dir_615c1_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "config",
+ .offset = 0x020000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x030000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x110000,
+ .size = 0x2e0000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x030000,
+ .size = 0x3c0000,
+ }
+};
+
+static struct flash_platform_data dir_615c1_flash_data = {
+ .parts = dir_615c1_partitions,
+ .nr_parts = ARRAY_SIZE(dir_615c1_partitions),
+};
+
+static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:orange:status",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wancpu",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:wlan",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "d-link:green:status",
+ .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:wan",
+ .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
+ .active_low = 1,
+ }
+
+};
+
+static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615C1_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR_615C1_GPIO_BTN_WPS,
+ }
+};
+
+#define DIR_615C1_LAN_PHYMASK BIT(0)
+#define DIR_615C1_WAN_PHYMASK BIT(4)
+#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \
+ DIR_615C1_WAN_PHYMASK))
+
+static void __init dir_615c1_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+ u8 *wlan_mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
+ "lan_mac=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ wlan_mac = mac;
+ }
+
+ ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&dir_615c1_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
+ dir_615c1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir_615c1_gpio_keys),
+ dir_615c1_gpio_keys);
+
+ ath79_register_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
+ dir_615c1_setup);
--- /dev/null
+/*
+ * D-Link DIR-825 rev. B1 board support
+ *
+ * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
+ *
+ * based on mach-wndr3700.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define DIR825B1_GPIO_LED_BLUE_USB 0
+#define DIR825B1_GPIO_LED_ORANGE_POWER 1
+#define DIR825B1_GPIO_LED_BLUE_POWER 2
+#define DIR825B1_GPIO_LED_BLUE_WPS 4
+#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
+#define DIR825B1_GPIO_LED_BLUE_PLANET 11
+
+#define DIR825B1_GPIO_BTN_RESET 3
+#define DIR825B1_GPIO_BTN_WPS 8
+
+#define DIR825B1_GPIO_RTL8366_SDA 5
+#define DIR825B1_GPIO_RTL8366_SCK 7
+
+#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL)
+
+#define DIR825B1_CAL_LOCATION_0 0x1f661000
+#define DIR825B1_CAL_LOCATION_1 0x1f665000
+
+#define DIR825B1_MAC_LOCATION_0 0x1f66ffa0
+#define DIR825B1_MAC_LOCATION_1 0x1f66ffb4
+
+static struct mtd_partition dir825b1_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "config",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x610000,
+ }, {
+ .name = "caldata",
+ .offset = 0x660000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "unknown",
+ .offset = 0x670000,
+ .size = 0x190000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data dir825b1_flash_data = {
+ .parts = dir825b1_partitions,
+ .nr_parts = ARRAY_SIZE(dir825b1_partitions),
+};
+
+static struct gpio_led dir825b1_leds_gpio[] __initdata = {
+ {
+ .name = "d-link:blue:usb",
+ .gpio = DIR825B1_GPIO_LED_BLUE_USB,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:power",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:power",
+ .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:wps",
+ .gpio = DIR825B1_GPIO_LED_BLUE_WPS,
+ .active_low = 1,
+ }, {
+ .name = "d-link:orange:planet",
+ .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
+ .active_low = 1,
+ }, {
+ .name = "d-link:blue:planet",
+ .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825B1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = DIR825B1_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
+ { .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
+ .gpio_sda = DIR825B1_GPIO_RTL8366_SDA,
+ .gpio_sck = DIR825B1_GPIO_RTL8366_SCK,
+ .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
+ .initvals = dir825b1_rtl8366s_initvals,
+};
+
+static struct platform_device dir825b1_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &dir825b1_rtl8366s_data,
+ }
+};
+
+static void dir825b1_read_ascii_mac(u8 *dest, unsigned int src_addr)
+{
+ int ret;
+ u8 *src = (u8 *)KSEG1ADDR(src_addr);
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN)
+ memset(dest, 0, ETH_ALEN);
+}
+
+static void __init dir825b1_setup(void)
+{
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+
+ dir825b1_read_ascii_mac(mac1, DIR825B1_MAC_LOCATION_0);
+ dir825b1_read_ascii_mac(mac2, DIR825B1_MAC_LOCATION_1);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
+ ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
+ ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&dir825b1_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
+ dir825b1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(dir825b1_gpio_keys),
+ dir825b1_gpio_keys);
+
+ ath79_register_usb();
+
+ platform_device_register(&dir825b1_rtl8366s_device);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init((u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0), mac1,
+ (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_1), mac2);
+}
+
+MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
+ dir825b1_setup);
--- /dev/null
+/*
+ * Senao EAP7660D board support
+ *
+ * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/ath5k_platform.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/pci.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */
+#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL)
+
+#define EAP7660D_GPIO_DS4 7
+#define EAP7660D_GPIO_DS5 2
+#define EAP7660D_GPIO_DS7 0
+#define EAP7660D_GPIO_DS8 4
+#define EAP7660D_GPIO_SW1 3
+#define EAP7660D_GPIO_SW3 8
+#define EAP7660D_PHYMASK BIT(20)
+#define EAP7660D_BOARDCONFIG 0x1F7F0000
+#define EAP7660D_GBIC_MAC_OFFSET 0x1000
+#define EAP7660D_WMAC0_MAC_OFFSET 0x1010
+#define EAP7660D_WMAC1_MAC_OFFSET 0x1016
+#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000
+#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000
+
+#ifdef CONFIG_PCI
+static struct ath5k_platform_data eap7660d_wmac0_data;
+static struct ath5k_platform_data eap7660d_wmac1_data;
+static char eap7660d_wmac0_mac[6];
+static char eap7660d_wmac1_mac[6];
+static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
+static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
+
+static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
+{
+ switch (PCI_SLOT(dev->devfn)) {
+ case 17:
+ dev->dev.platform_data = &eap7660d_wmac0_data;
+ break;
+
+ case 18:
+ dev->dev.platform_data = &eap7660d_wmac1_data;
+ break;
+ }
+
+ return 0;
+}
+
+void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+ if (cal_data0 && *cal_data0 == 0xa55a) {
+ memcpy(eap7660d_wmac0_eeprom, cal_data0,
+ ATH5K_PLAT_EEP_MAX_WORDS);
+ eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
+ }
+
+ if (cal_data1 && *cal_data1 == 0xa55a) {
+ memcpy(eap7660d_wmac1_eeprom, cal_data1,
+ ATH5K_PLAT_EEP_MAX_WORDS);
+ eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
+ }
+
+ if (mac_addr0) {
+ memcpy(eap7660d_wmac0_mac, mac_addr0,
+ sizeof(eap7660d_wmac0_mac));
+ eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
+ }
+
+ if (mac_addr1) {
+ memcpy(eap7660d_wmac1_mac, mac_addr1,
+ sizeof(eap7660d_wmac1_mac));
+ eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
+ }
+
+ ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
+ ath79_register_pci();
+}
+#else
+static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
+ u8 *cal_data1, u8 *mac_addr1)
+{
+}
+#endif /* CONFIG_PCI */
+
+static struct gpio_led eap7660d_leds_gpio[] __initdata = {
+ {
+ .name = "eap7660d:green:ds8",
+ .gpio = EAP7660D_GPIO_DS8,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds5",
+ .gpio = EAP7660D_GPIO_DS5,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds7",
+ .gpio = EAP7660D_GPIO_DS7,
+ .active_low = 0,
+ },
+ {
+ .name = "eap7660d:green:ds4",
+ .gpio = EAP7660D_GPIO_DS4,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EAP7660D_GPIO_SW1,
+ .active_low = 1,
+ },
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = EAP7660D_GPIO_SW3,
+ .active_low = 1,
+ }
+};
+
+static const char *eap7660d_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data eap7660d_flash_data = {
+ .part_probes = eap7660d_part_probes,
+};
+
+static void __init eap7660d_setup(void)
+{
+ u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
+
+ ath79_register_mdio(0, ~EAP7660D_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
+ ath79_register_eth(0);
+ ath79_register_m25p80(&eap7660d_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
+ eap7660d_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(eap7660d_gpio_keys),
+ eap7660d_gpio_keys);
+ eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
+ boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
+ boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
+ boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
+};
+
+MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
+ eap7660d_setup);
--- /dev/null
+/*
+ * ALFA NETWORKS Hornet-UB board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define HORNET_UB_GPIO_LED_WLAN 0
+#define HORNET_UB_GPIO_LED_USB 1
+#define HORNET_UB_GPIO_LED_LAN 13
+#define HORNET_UB_GPIO_LED_WAN 17
+#define HORNET_UB_GPIO_LED_WPS 27
+
+#define HORNET_UB_GPIO_BTN_RESET 11
+#define HORNET_UB_GPIO_BTN_WPS 12
+
+#define HORNET_UB_GPIO_USB_POWER 26
+
+#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */
+#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL)
+
+#define HORNET_UB_MAC0_OFFSET 0x0000
+#define HORNET_UB_MAC1_OFFSET 0x0006
+#define HORNET_UB_CALDATA_OFFSET 0x1000
+
+static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
+ {
+ .name = "alfa:blue:lan",
+ .gpio = HORNET_UB_GPIO_LED_LAN,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:usb",
+ .gpio = HORNET_UB_GPIO_LED_USB,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:wan",
+ .gpio = HORNET_UB_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "alfa:blue:wlan",
+ .gpio = HORNET_UB_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "alfa:blue:wps",
+ .gpio = HORNET_UB_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HORNET_UB_GPIO_BTN_WPS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = HORNET_UB_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init hornet_ub_gpio_setup(void)
+{
+ u32 t;
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
+
+ gpio_request(HORNET_UB_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(HORNET_UB_GPIO_USB_POWER, 1);
+}
+
+static void __init hornet_ub_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ hornet_ub_gpio_setup();
+
+ ath79_register_m25p80(NULL);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
+ hornet_ub_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(hornet_ub_gpio_keys),
+ hornet_ub_gpio_keys);
+
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + HORNET_UB_MAC0_OFFSET, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr,
+ art + HORNET_UB_MAC1_OFFSET, 0);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORKS Hornet-UB",
+ hornet_ub_setup);
--- /dev/null
+/*
+ * jjPlus JA76PF board support
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */
+#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL)
+
+#define JA76PF_GPIO_I2C_SCL 0
+#define JA76PF_GPIO_I2C_SDA 1
+#define JA76PF_GPIO_LED_1 5
+#define JA76PF_GPIO_LED_2 4
+#define JA76PF_GPIO_LED_3 3
+#define JA76PF_GPIO_BTN_RESET 11
+
+static struct gpio_led ja76pf_leds_gpio[] __initdata = {
+ {
+ .name = "ja76pf:green:led1",
+ .gpio = JA76PF_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "ja76pf:green:led2",
+ .gpio = JA76PF_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "ja76pf:green:led3",
+ .gpio = JA76PF_GPIO_LED_3,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JA76PF_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
+ .sda_pin = JA76PF_GPIO_I2C_SDA,
+ .scl_pin = JA76PF_GPIO_I2C_SCL,
+};
+
+static struct platform_device ja76pf_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &ja76pf_i2c_gpio_data,
+ }
+};
+
+static const char *ja76pf_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data ja76pf_flash_data = {
+ .part_probes = ja76pf_part_probes,
+};
+
+#define JA76PF_WAN_PHYMASK (1 << 4)
+#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
+#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
+
+static void __init ja76pf_init(void)
+{
+ ath79_register_m25p80(&ja76pf_flash_data);
+
+ ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ platform_device_register(&ja76pf_i2c_gpio_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
+ ja76pf_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ja76pf_gpio_keys),
+ ja76pf_gpio_keys);
+
+ ath79_register_usb();
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
--- /dev/null
+/*
+ * jjPlus JWAP003 board support
+ *
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
+#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
+
+#define JWAP003_GPIO_WPS 11
+#define JWAP003_GPIO_I2C_SCL 0
+#define JWAP003_GPIO_I2C_SDA 1
+
+static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = JWAP003_GPIO_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
+ .sda_pin = JWAP003_GPIO_I2C_SDA,
+ .scl_pin = JWAP003_GPIO_I2C_SCL,
+};
+
+static struct platform_device jwap003_i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &jwap003_i2c_gpio_data,
+ }
+};
+
+static const char *jwap003_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data jwap003_flash_data = {
+ .part_probes = jwap003_part_probes,
+};
+
+#define JWAP003_WAN_PHYMASK BIT(0)
+#define JWAP003_LAN_PHYMASK BIT(4)
+
+static void __init jwap003_init(void)
+{
+ ath79_register_m25p80(&jwap003_flash_data);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ platform_device_register(&jwap003_i2c_gpio_device);
+
+ ath79_register_usb();
+
+ ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(jwap003_gpio_keys),
+ jwap003_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
--- /dev/null
+/*
+ * Planex MZK-W04NU board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MZK_W04NU_GPIO_LED_USB 0
+#define MZK_W04NU_GPIO_LED_STATUS 1
+#define MZK_W04NU_GPIO_LED_WPS 3
+#define MZK_W04NU_GPIO_LED_WLAN 6
+#define MZK_W04NU_GPIO_LED_AP 15
+#define MZK_W04NU_GPIO_LED_ROUTER 16
+
+#define MZK_W04NU_GPIO_BTN_APROUTER 5
+#define MZK_W04NU_GPIO_BTN_WPS 12
+#define MZK_W04NU_GPIO_BTN_RESET 21
+
+#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
+
+static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
+ {
+ .name = "planex:green:status",
+ .gpio = MZK_W04NU_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "planex:blue:wps",
+ .gpio = MZK_W04NU_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:wlan",
+ .gpio = MZK_W04NU_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:usb",
+ .gpio = MZK_W04NU_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:ap",
+ .gpio = MZK_W04NU_GPIO_LED_AP,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:router",
+ .gpio = MZK_W04NU_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "aprouter",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W04NU_GPIO_BTN_APROUTER,
+ .active_low = 0,
+ }
+};
+
+#define MZK_W04NU_WAN_PHYMASK BIT(4)
+#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK)
+
+static void __init mzk_w04nu_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
+ mzk_w04nu_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mzk_w04nu_gpio_keys),
+ mzk_w04nu_gpio_keys);
+ ath79_register_usb();
+
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
+ mzk_w04nu_setup);
--- /dev/null
+/*
+ * Planex MZK-W300NH board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define MZK_W300NH_GPIO_LED_STATUS 1
+#define MZK_W300NH_GPIO_LED_WPS 3
+#define MZK_W300NH_GPIO_LED_WLAN 6
+#define MZK_W300NH_GPIO_LED_AP_GREEN 15
+#define MZK_W300NH_GPIO_LED_AP_AMBER 16
+
+#define MZK_W300NH_GPIO_BTN_APROUTER 5
+#define MZK_W300NH_GPIO_BTN_WPS 12
+#define MZK_W300NH_GPIO_BTN_RESET 21
+
+#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
+
+static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
+ {
+ .name = "planex:green:status",
+ .gpio = MZK_W300NH_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "planex:blue:wps",
+ .gpio = MZK_W300NH_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:wlan",
+ .gpio = MZK_W300NH_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "planex:green:aprouter",
+ .gpio = MZK_W300NH_GPIO_LED_AP_GREEN,
+ }, {
+ .name = "planex:amber:aprouter",
+ .gpio = MZK_W300NH_GPIO_LED_AP_AMBER,
+ }
+};
+
+static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "aprouter",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
+ .active_low = 0,
+ }
+};
+
+#define MZK_W300NH_WAN_PHYMASK BIT(4)
+#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
+
+static void __init mzk_w300nh_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
+ mzk_w300nh_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(mzk_w300nh_gpio_keys),
+ mzk_w300nh_gpio_keys);
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
+ mzk_w300nh_setup);
--- /dev/null
+/*
+ * Zyxel NBG 460N/550N/550NH board support
+ *
+ * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
+ *
+ * based on mach-tl-wr1043nd.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+/* LEDs */
+#define NBG460N_GPIO_LED_WPS 3
+#define NBG460N_GPIO_LED_WAN 6
+#define NBG460N_GPIO_LED_POWER 14
+#define NBG460N_GPIO_LED_WLAN 15
+
+/* Buttons */
+#define NBG460N_GPIO_BTN_WPS 12
+#define NBG460N_GPIO_BTN_RESET 21
+
+#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL)
+
+/* RTC chip PCF8563 I2C interface */
+#define NBG460N_GPIO_PCF8563_SDA 8
+#define NBG460N_GPIO_PCF8563_SCK 7
+
+/* Switch configuration I2C interface */
+#define NBG460N_GPIO_RTL8366_SDA 16
+#define NBG460N_GPIO_RTL8366_SCK 18
+
+static struct mtd_partition nbg460n_partitions[] = {
+ {
+ .name = "Bootbase",
+ .offset = 0,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "U-Boot Config",
+ .offset = 0x010000,
+ .size = 0x030000,
+ }, {
+ .name = "U-Boot",
+ .offset = 0x040000,
+ .size = 0x030000,
+ }, {
+ .name = "linux",
+ .offset = 0x070000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x150000,
+ .size = 0x2a0000,
+ }, {
+ .name = "CalibData",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x070000,
+ .size = 0x380000,
+ }
+};
+
+static struct flash_platform_data nbg460n_flash_data = {
+ .parts = nbg460n_partitions,
+ .nr_parts = ARRAY_SIZE(nbg460n_partitions),
+};
+
+static struct gpio_led nbg460n_leds_gpio[] __initdata = {
+ {
+ .name = "nbg460n:green:power",
+ .gpio = NBG460N_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ }, {
+ .name = "nbg460n:green:wps",
+ .gpio = NBG460N_GPIO_LED_WPS,
+ .active_low = 0,
+ }, {
+ .name = "nbg460n:green:wlan",
+ .gpio = NBG460N_GPIO_LED_WLAN,
+ .active_low = 0,
+ }, {
+ /* Not really for controlling the LED,
+ when set low the LED blinks uncontrollable */
+ .name = "nbg460n:green:wan",
+ .gpio = NBG460N_GPIO_LED_WAN,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG460N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = NBG460N_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
+ .sda_pin = NBG460N_GPIO_PCF8563_SDA,
+ .scl_pin = NBG460N_GPIO_PCF8563_SCK,
+ .udelay = 10,
+};
+
+static struct platform_device nbg460n_i2c_device = {
+ .name = "i2c-gpio",
+ .id = -1,
+ .num_resources = 0,
+ .resource = NULL,
+ .dev = {
+ .platform_data = &nbg460n_i2c_device_platdata,
+ },
+};
+
+static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
+ {
+ I2C_BOARD_INFO("pcf8563", 0x51),
+ },
+};
+
+static void __devinit nbg460n_i2c_init(void)
+{
+ /* The gpio interface */
+ platform_device_register(&nbg460n_i2c_device);
+ /* I2C devices */
+ i2c_register_board_info(0, nbg460n_i2c_devs,
+ ARRAY_SIZE(nbg460n_i2c_devs));
+}
+
+
+static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
+ .gpio_sda = NBG460N_GPIO_RTL8366_SDA,
+ .gpio_sck = NBG460N_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device nbg460n_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &nbg460n_rtl8366s_data,
+ }
+};
+
+static void __init nbg460n_setup(void)
+{
+ /* end of bootloader sector contains mac address */
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
+ /* last sector contains wlan calib data */
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ /* LAN Port */
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ /* WAN Port */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ /* register the switch phy */
+ platform_device_register(&nbg460n_rtl8366s_device);
+
+ /* register flash */
+ ath79_register_m25p80(&nbg460n_flash_data);
+
+ ath79_register_wmac(eeprom, mac);
+
+ /* register RTC chip */
+ nbg460n_i2c_init();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
+ nbg460n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(nbg460n_gpio_keys),
+ nbg460n_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
+ nbg460n_setup);
--- /dev/null
+/*
+ * OpenMesh OM2P support
+ *
+ * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define OM2P_GPIO_LED_POWER 0
+#define OM2P_GPIO_LED_GREEN 13
+#define OM2P_GPIO_LED_RED 14
+#define OM2P_GPIO_LED_YELLOW 15
+#define OM2P_GPIO_LED_LAN 16
+#define OM2P_GPIO_LED_WAN 17
+#define OM2P_GPIO_BTN_RESET 11
+
+#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */
+#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL)
+
+#define OM2P_WAN_PHYMASK BIT(4)
+
+static struct flash_platform_data om2p_flash_data = {
+ .type = "s25sl12800",
+ .name = "ar7240-nor0",
+};
+
+static struct gpio_led om2p_leds_gpio[] __initdata = {
+ {
+ .name = "om2p:blue:power",
+ .gpio = OM2P_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "om2p:red:wifi",
+ .gpio = OM2P_GPIO_LED_RED,
+ .active_low = 1,
+ }, {
+ .name = "om2p:yellow:wifi",
+ .gpio = OM2P_GPIO_LED_YELLOW,
+ .active_low = 1,
+ }, {
+ .name = "om2p:green:wifi",
+ .gpio = OM2P_GPIO_LED_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "om2p:blue:lan",
+ .gpio = OM2P_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "om2p:blue:wan",
+ .gpio = OM2P_GPIO_LED_WAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = OM2P_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init om2p_setup(void)
+{
+ u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
+ u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
+ u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(&om2p_flash_data);
+
+ ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
+ om2p_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(om2p_gpio_keys),
+ om2p_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
--- /dev/null
+/*
+ * Atheros PB42 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL)
+
+#define PB42_GPIO_BTN_SW4 8
+#define PB42_GPIO_BTN_SW5 3
+
+static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB42_GPIO_BTN_SW4,
+ .active_low = 1,
+ }, {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB42_GPIO_BTN_SW5,
+ .active_low = 1,
+ }
+};
+
+static const char *pb42_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data pb42_flash_data = {
+ .part_probes = pb42_part_probes,
+};
+
+#define PB42_WAN_PHYMASK BIT(20)
+#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
+
+static void __init pb42_init(void)
+{
+ ath79_register_m25p80(&pb42_flash_data);
+
+ ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb42_gpio_keys),
+ pb42_gpio_keys);
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
--- /dev/null
+/*
+ * Atheros PB92 board support
+ *
+ * Copyright (C) 2010 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+static struct mtd_partition pb92_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x2b0000,
+ }, {
+ .name = "uImage",
+ .offset = 0x300000,
+ .size = 0x0e0000,
+ }, {
+ .name = "ART",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data pb92_flash_data = {
+ .parts = pb92_partitions,
+ .nr_parts = ARRAY_SIZE(pb92_partitions),
+};
+
+#define PB92_KEYS_POLL_INTERVAL 20 /* msecs */
+#define PB92_KEYS_DEBOUNCE_INTERVAL (3 * PB92_KEYS_POLL_INTERVAL)
+
+#define PB92_GPIO_BTN_SW4 8
+#define PB92_GPIO_BTN_SW5 3
+
+static struct gpio_keys_button pb92_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB92_GPIO_BTN_SW4,
+ .active_low = 1,
+ }, {
+ .desc = "sw5",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = PB92_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = PB92_GPIO_BTN_SW5,
+ .active_low = 1,
+ }
+};
+
+static void __init pb92_init(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(&pb92_flash_data);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(pb92_gpio_keys),
+ pb92_gpio_keys);
+
+ ath79_register_usb();
+
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_PB92, "PB92", "Atheros PB92", pb92_init);
--- /dev/null
+/*
+ * MikroTik RouterBOARD 4xx series support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mdio-gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/pci.h>
+#include <asm/mach-ath79/rb4xx_cpld.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define RB4XX_GPIO_USER_LED 4
+#define RB4XX_GPIO_RESET_SWITCH 7
+
+#define RB4XX_GPIO_CPLD_BASE 32
+#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
+#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
+#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
+#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
+#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
+
+#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
+
+static struct gpio_led rb4xx_leds_gpio[] __initdata = {
+ {
+ .name = "rb4xx:yellow:user",
+ .gpio = RB4XX_GPIO_USER_LED,
+ .active_low = 0,
+ }, {
+ .name = "rb4xx:green:led1",
+ .gpio = RB4XX_GPIO_CPLD_LED1,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led2",
+ .gpio = RB4XX_GPIO_CPLD_LED2,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led3",
+ .gpio = RB4XX_GPIO_CPLD_LED3,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led4",
+ .gpio = RB4XX_GPIO_CPLD_LED4,
+ .active_low = 1,
+ }, {
+ .name = "rb4xx:green:led5",
+ .gpio = RB4XX_GPIO_CPLD_LED5,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
+ {
+ .desc = "reset_switch",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RB4XX_GPIO_RESET_SWITCH,
+ .active_low = 1,
+ }
+};
+
+static struct platform_device rb4xx_nand_device = {
+ .name = "rb4xx-nand",
+ .id = -1,
+};
+
+static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
+ {
+ .slot = 17,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }, {
+ .slot = 18,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(0),
+ }, {
+ .slot = 18,
+ .pin = 2,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(1),
+ }, {
+ .slot = 19,
+ .pin = 1,
+ .irq = ATH79_PCI_IRQ(2),
+ }
+};
+
+static struct mtd_partition rb4xx_partitions[] = {
+ {
+ .name = "routerboot",
+ .offset = 0,
+ .size = 0x0b000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "hard_config",
+ .offset = 0x0b000,
+ .size = 0x01000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "bios",
+ .offset = 0x0d000,
+ .size = 0x02000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "soft_config",
+ .offset = 0x0f000,
+ .size = 0x01000,
+ }
+};
+
+static struct flash_platform_data rb4xx_flash_data = {
+ .type = "pm25lv512",
+ .parts = rb4xx_partitions,
+ .nr_parts = ARRAY_SIZE(rb4xx_partitions),
+};
+
+static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
+ .gpio_base = RB4XX_GPIO_CPLD_BASE,
+};
+
+static struct mmc_spi_platform_data rb4xx_mmc_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static struct spi_board_info rb4xx_spi_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 0,
+ .max_speed_hz = 25000000,
+ .modalias = "m25p80",
+ .platform_data = &rb4xx_flash_data,
+ }, {
+ .bus_num = 0,
+ .chip_select = 1,
+ .max_speed_hz = 25000000,
+ .modalias = "spi-rb4xx-cpld",
+ .platform_data = &rb4xx_cpld_data,
+ }
+};
+
+static struct spi_board_info rb4xx_microsd_info[] = {
+ {
+ .bus_num = 0,
+ .chip_select = 2,
+ .max_speed_hz = 25000000,
+ .modalias = "mmc_spi",
+ .platform_data = &rb4xx_mmc_data,
+ }
+};
+
+
+static struct resource rb4xx_spi_resources[] = {
+ {
+ .start = AR71XX_SPI_BASE,
+ .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device rb4xx_spi_device = {
+ .name = "rb4xx-spi",
+ .id = -1,
+ .resource = rb4xx_spi_resources,
+ .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
+};
+
+static void __init rb4xx_generic_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rb4xx_gpio_keys),
+ rb4xx_gpio_keys);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+}
+
+static void __init rb411_setup(void)
+{
+ rb4xx_generic_setup();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, 0xfffffffc);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x00000003;
+
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
+ rb411_setup);
+
+static void __init rb411u_setup(void)
+{
+ rb411_setup();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
+ rb411u_setup);
+
+#define RB433_LAN_PHYMASK BIT(0)
+#define RB433_WAN_PHYMASK BIT(4)
+#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
+
+static void __init rb433_setup(void)
+{
+ rb4xx_generic_setup();
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+
+ ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
+ rb433_setup);
+
+static void __init rb433u_setup(void)
+{
+ rb433_setup();
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
+ rb433u_setup);
+
+#define RB450_LAN_PHYMASK BIT(0)
+#define RB450_WAN_PHYMASK BIT(4)
+#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
+
+static void __init rb450_generic_setup(int gige)
+{
+ rb4xx_generic_setup();
+ ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth0_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth1_data.phy_if_mode = (gige) ?
+ PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+}
+
+static void __init rb450_setup(void)
+{
+ rb450_generic_setup(0);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
+ rb450_setup);
+
+static void __init rb450g_setup(void)
+{
+ rb450_generic_setup(1);
+ spi_register_board_info(rb4xx_microsd_info,
+ ARRAY_SIZE(rb4xx_microsd_info));
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
+ rb450g_setup);
+
+static void __init rb493_setup(void)
+{
+ rb4xx_generic_setup();
+
+ ath79_register_mdio(0, 0x3fffff00);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x00000001;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
+ rb493_setup);
+
+#define RB493G_GPIO_MDIO_MDC 7
+#define RB493G_GPIO_MDIO_DATA 8
+
+#define RB493G_MDIO_PHYMASK BIT(0)
+
+static struct mdio_gpio_platform_data rb493g_mdio_data = {
+ .mdc = RB493G_GPIO_MDIO_MDC,
+ .mdio = RB493G_GPIO_MDIO_DATA,
+
+ .phy_mask = ~RB493G_MDIO_PHYMASK,
+};
+
+static struct platform_device rb493g_mdio_device = {
+ .name = "mdio-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rb493g_mdio_data,
+ },
+};
+
+static void __init rb493g_setup(void)
+{
+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+ AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+ rb4xx_leds_gpio);
+
+ spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+ platform_device_register(&rb4xx_spi_device);
+ platform_device_register(&rb4xx_nand_device);
+
+ ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
+ ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ platform_device_register(&rb493g_mdio_device);
+
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+
+ ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
+ rb493g_setup);
--- /dev/null
+/*
+ * MikroTik RouterBOARD 750 support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/export.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/mach-rb750.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "machtypes.h"
+
+static struct rb750_led_data rb750_leds[] = {
+ {
+ .name = "rb750:green:act",
+ .mask = RB750_LED_ACT,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port1",
+ .mask = RB750_LED_PORT5,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port2",
+ .mask = RB750_LED_PORT4,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port3",
+ .mask = RB750_LED_PORT3,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port4",
+ .mask = RB750_LED_PORT2,
+ .active_low = 1,
+ }, {
+ .name = "rb750:green:port5",
+ .mask = RB750_LED_PORT1,
+ .active_low = 1,
+ }
+};
+
+static struct rb750_led_platform_data rb750_leds_data = {
+ .num_leds = ARRAY_SIZE(rb750_leds),
+ .leds = rb750_leds,
+};
+
+static struct platform_device rb750_leds_device = {
+ .name = "leds-rb750",
+ .dev = {
+ .platform_data = &rb750_leds_data,
+ }
+};
+
+static struct platform_device rb750_nand_device = {
+ .name = "rb750-nand",
+ .id = -1,
+};
+
+int rb750_latch_change(u32 mask_clr, u32 mask_set)
+{
+ static DEFINE_SPINLOCK(lock);
+ static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
+ static u32 latch_oe;
+ static u32 latch_clr;
+ unsigned long flags;
+ u32 t;
+ int ret = 0;
+
+ spin_lock_irqsave(&lock, flags);
+
+ if ((mask_clr & BIT(31)) != 0 &&
+ (latch_set & RB750_LVC573_LE) == 0) {
+ goto unlock;
+ }
+
+ latch_set = (latch_set | mask_set) & ~mask_clr;
+ latch_clr = (latch_clr | mask_clr) & ~mask_set;
+
+ if (latch_oe == 0)
+ latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
+
+ if (likely(latch_set & RB750_LVC573_LE)) {
+ void __iomem *base = ath79_gpio_base;
+
+ t = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ t |= mask_clr | latch_oe | mask_set;
+
+ __raw_writel(t, base + AR71XX_GPIO_REG_OE);
+ __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
+ __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
+ } else if (mask_clr & RB750_LVC573_LE) {
+ void __iomem *base = ath79_gpio_base;
+
+ latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
+ __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
+ /* flush write */
+ __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
+ }
+
+ ret = 1;
+
+unlock:
+ spin_unlock_irqrestore(&lock, flags);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(rb750_latch_change);
+
+void rb750_nand_pins_enable(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
+ AR724X_GPIO_FUNC_SPI_EN);
+}
+EXPORT_SYMBOL_GPL(rb750_nand_pins_enable);
+
+void rb750_nand_pins_disable(void)
+{
+ ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
+ AR724X_GPIO_FUNC_JTAG_DISABLE);
+}
+EXPORT_SYMBOL_GPL(rb750_nand_pins_disable);
+
+static void __init rb750_setup(void)
+{
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ platform_device_register(&rb750_leds_device);
+ platform_device_register(&rb750_nand_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
+ rb750_setup);
--- /dev/null
+/*
+ * Redwave RW2458N support
+ *
+ * Copyright (C) 2011-2012 Cezary Jackiewicz <cezary@eko.one.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define RW2458N_GPIO_LED_D3 1
+#define RW2458N_GPIO_LED_D4 0
+#define RW2458N_GPIO_LED_D5 11
+#define RW2458N_GPIO_LED_D6 7
+#define RW2458N_GPIO_BTN_RESET 12
+
+#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL)
+
+static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = RW2458N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+#define RW2458N_WAN_PHYMASK BIT(4)
+
+static struct gpio_led rw2458n_leds_gpio[] __initdata = {
+ {
+ .name = "rw2458n:green:d3",
+ .gpio = RW2458N_GPIO_LED_D3,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d4",
+ .gpio = RW2458N_GPIO_LED_D4,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d5",
+ .gpio = RW2458N_GPIO_LED_D5,
+ .active_low = 1,
+ }, {
+ .name = "rw2458n:green:d6",
+ .gpio = RW2458N_GPIO_LED_D6,
+ .active_low = 1,
+ }
+};
+
+static const char *rw2458n_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data rw2458n_flash_data = {
+ .part_probes = rw2458n_part_probes,
+};
+
+static void __init rw2458n_setup(void)
+{
+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&rw2458n_flash_data);
+
+ ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ap91_pci_init(ee, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
+ rw2458n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(rw2458n_gpio_keys),
+ rw2458n_gpio_keys);
+ ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
+ rw2458n_setup);
--- /dev/null
+/*
+ * TrendNET TEW-632BRP board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "nvram.h"
+
+#define TEW_632BRP_GPIO_LED_STATUS 1
+#define TEW_632BRP_GPIO_LED_WPS 3
+#define TEW_632BRP_GPIO_LED_WLAN 6
+#define TEW_632BRP_GPIO_BTN_WPS 12
+#define TEW_632BRP_GPIO_BTN_RESET 21
+
+#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
+
+#define TEW_632BRP_CONFIG_ADDR 0x1f020000
+#define TEW_632BRP_CONFIG_SIZE 0x10000
+
+static struct mtd_partition tew_632brp_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "config",
+ .offset = 0x020000,
+ .size = 0x010000,
+ }, {
+ .name = "kernel",
+ .offset = 0x030000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x110000,
+ .size = 0x2e0000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x030000,
+ .size = 0x3c0000,
+ }
+};
+
+static struct flash_platform_data tew_632brp_flash_data = {
+ .parts = tew_632brp_partitions,
+ .nr_parts = ARRAY_SIZE(tew_632brp_partitions),
+};
+
+static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
+ {
+ .name = "tew-632brp:green:status",
+ .gpio = TEW_632BRP_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "tew-632brp:blue:wps",
+ .gpio = TEW_632BRP_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "tew-632brp:green:wlan",
+ .gpio = TEW_632BRP_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_632BRP_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW_632BRP_GPIO_BTN_WPS,
+ }
+};
+
+#define TEW_632BRP_LAN_PHYMASK BIT(0)
+#define TEW_632BRP_WAN_PHYMASK BIT(4)
+#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \
+ TEW_632BRP_WAN_PHYMASK))
+
+static void __init tew_632brp_setup(void)
+{
+ const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+ u8 *wlan_mac = NULL;
+
+ if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
+ "lan_mac=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ wlan_mac = mac;
+ }
+
+ ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&tew_632brp_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
+ tew_632brp_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew_632brp_gpio_keys),
+ tew_632brp_gpio_keys);
+
+ ath79_register_wmac(eeprom, wlan_mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
+ tew_632brp_setup);
--- /dev/null
+/*
+ * TRENDnet TEW-673GRU board support
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TEW673GRU_GPIO_LCD_SCK 0
+#define TEW673GRU_GPIO_LCD_MOSI 1
+#define TEW673GRU_GPIO_LCD_MISO 2
+#define TEW673GRU_GPIO_LCD_CS 6
+
+#define TEW673GRU_GPIO_LED_WPS 9
+
+#define TEW673GRU_GPIO_BTN_RESET 3
+#define TEW673GRU_GPIO_BTN_WPS 8
+
+#define TEW673GRU_GPIO_RTL8366_SDA 5
+#define TEW673GRU_GPIO_RTL8366_SCK 7
+
+#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
+
+#define TEW673GRU_CAL_LOCATION_0 0x1f661000
+#define TEW673GRU_CAL_LOCATION_1 0x1f665000
+
+#define TEW673GRU_MAC_LOCATION_0 0x1f66ffa0
+#define TEW673GRU_MAC_LOCATION_1 0x1f66ffb4
+
+static struct mtd_partition tew673gru_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "config",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x610000,
+ }, {
+ .name = "caldata",
+ .offset = 0x660000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "unknown",
+ .offset = 0x670000,
+ .size = 0x190000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data tew673gru_flash_data = {
+ .parts = tew673gru_partitions,
+ .nr_parts = ARRAY_SIZE(tew673gru_partitions),
+};
+
+static struct gpio_led tew673gru_leds_gpio[] __initdata = {
+ {
+ .name = "trendnet:blue:wps",
+ .gpio = TEW673GRU_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW673GRU_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TEW673GRU_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
+ { .reg = 0x06, .val = 0x0108 },
+};
+
+static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
+ .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA,
+ .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK,
+ .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals),
+ .initvals = tew673gru_rtl8366s_initvals,
+};
+
+static struct platform_device tew673gru_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tew673gru_rtl8366s_data,
+ }
+};
+
+static struct spi_board_info tew673gru_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 400000,
+ .modalias = "spidev",
+ .mode = SPI_MODE_2,
+ .controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
+ },
+};
+
+static struct spi_gpio_platform_data tew673gru_spi_data = {
+ .sck = TEW673GRU_GPIO_LCD_SCK,
+ .miso = TEW673GRU_GPIO_LCD_MISO,
+ .mosi = TEW673GRU_GPIO_LCD_MOSI,
+ .num_chipselect = 1,
+};
+
+static struct platform_device tew673gru_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &tew673gru_spi_data,
+ },
+};
+
+static void tew673gru_read_ascii_mac(u8 *dest, unsigned int src_addr)
+{
+ int ret;
+ u8 *src = (u8 *)KSEG1ADDR(src_addr);
+
+ ret = sscanf(src, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &dest[0], &dest[1], &dest[2],
+ &dest[3], &dest[4], &dest[5]);
+
+ if (ret != ETH_ALEN) memset(dest, 0, ETH_ALEN);
+}
+
+static void __init tew673gru_setup(void)
+{
+ u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
+
+ tew673gru_read_ascii_mac(mac1, TEW673GRU_MAC_LOCATION_0);
+ tew673gru_read_ascii_mac(mac2, TEW673GRU_MAC_LOCATION_1);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
+ ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
+ ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&tew673gru_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
+ tew673gru_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tew673gru_gpio_keys),
+ tew673gru_gpio_keys);
+
+ ath79_register_usb();
+
+ platform_device_register(&tew673gru_rtl8366s_device);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ ap94_pci_init((u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0), mac1,
+ (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_1), mac2);
+
+ spi_register_board_info(tew673gru_spi_info,
+ ARRAY_SIZE(tew673gru_spi_info));
+ platform_device_register(&tew673gru_spi_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
+ tew673gru_setup);
--- /dev/null
+/*
+ * TP-LINK TL-MR11U board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR11U_GPIO_LED_3G 27
+#define TL_MR11U_GPIO_LED_WLAN 26
+#define TL_MR11U_GPIO_LED_LAN 17
+
+#define TL_MR11U_GPIO_BTN_WPS 20
+#define TL_MR11U_GPIO_BTN_RESET 11
+
+#define TL_MR11U_GPIO_USB_POWER 8
+
+#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr11u_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr11u_flash_data = {
+ .part_probes = tl_mr11u_part_probes,
+};
+
+static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR11U_GPIO_LED_3G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_MR11U_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_MR11U_GPIO_LED_LAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR11U_GPIO_BTN_RESET,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_mr11u_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_mr11u_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
+ tl_mr11u_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr11u_gpio_keys),
+ tl_mr11u_gpio_keys);
+
+ gpio_request(TL_MR11U_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_MR11U_GPIO_USB_POWER, 1);
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
+ tl_mr11u_setup);
--- /dev/null
+/*
+ * TP-LINK TL-MR3020 board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_MR3020_GPIO_LED_3G 27
+#define TL_MR3020_GPIO_LED_WLAN 0
+#define TL_MR3020_GPIO_LED_LAN 17
+#define TL_MR3020_GPIO_LED_WPS 26
+
+#define TL_MR3020_GPIO_BTN_WPS 11
+#define TL_MR3020_GPIO_BTN_SW1 18
+#define TL_MR3020_GPIO_BTN_SW2 20
+
+#define TL_MR3020_GPIO_USB_POWER 8
+
+#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3020_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr3020_flash_data = {
+ .part_probes = tl_mr3020_part_probes,
+};
+
+static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3020_GPIO_LED_3G,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_MR3020_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_MR3020_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "tp-link:green:wps",
+ .gpio = TL_MR3020_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw1",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_SW1,
+ .active_low = 0,
+ },
+ {
+ .desc = "sw2",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3020_GPIO_BTN_SW2,
+ .active_low = 0,
+ }
+};
+
+static void __init tl_mr3020_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_mr3020_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
+ tl_mr3020_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3020_gpio_keys),
+ tl_mr3020_gpio_keys);
+
+ gpio_request(TL_MR3020_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_MR3020_GPIO_USB_POWER, 1);
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
+ tl_mr3020_setup);
--- /dev/null
+/*
+ * TP-LINK TL-MR3220/3420 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TL_MR3X20_GPIO_LED_QSS 0
+#define TL_MR3X20_GPIO_LED_SYSTEM 1
+#define TL_MR3X20_GPIO_LED_3G 8
+
+#define TL_MR3X20_GPIO_BTN_RESET 11
+#define TL_MR3X20_GPIO_BTN_QSS 12
+
+#define TL_MR3X20_GPIO_USB_POWER 6
+
+#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
+
+static const char *tl_mr3x20_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_mr3x20_flash_data = {
+ .part_probes = tl_mr3x20_part_probes,
+};
+
+static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_MR3X20_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_MR3X20_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:3g",
+ .gpio = TL_MR3X20_GPIO_LED_3G,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3X20_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_MR3X20_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_ap99_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_mr3x20_flash_data);
+
+ ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_mr3x20_gpio_keys),
+ tl_mr3x20_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap91_pci_init(ee, mac);
+}
+
+static void __init tl_mr3x20_usb_setup(void)
+{
+ /* enable power for the USB port */
+ gpio_request(TL_MR3X20_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_MR3X20_GPIO_USB_POWER, 1);
+
+ ath79_register_usb();
+}
+
+static void __init tl_mr3220_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ tl_mr3x20_usb_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
+ tl_mr3220_setup);
+
+static void __init tl_mr3420_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+ tl_mr3x20_usb_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
+ tl_mr3420_setup);
+
+static void __init tl_wr841n_v7_setup(void)
+{
+ tl_ap99_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
+ tl_mr3x20_leds_gpio);
+ ap9x_pci_setup_wmac_led_pin(0, 0);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
+ "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WA901N/ND v2 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
+ * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WA901ND_V2_GPIO_LED_QSS 4
+#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2
+#define TL_WA901ND_V2_GPIO_LED_WLAN 9
+
+#define TL_WA901ND_V2_GPIO_BTN_RESET 3
+#define TL_WA901ND_V2_GPIO_BTN_QSS 7
+
+#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa901nd_v2_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa901nd_v2_flash_data = {
+ .part_probes = tl_wa901nd_v2_part_probes,
+};
+
+static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA901ND_V2_GPIO_LED_QSS,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WA901ND_V2_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_V2_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wa901nd_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x00001000;
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
+ AR71XX_RESET_GE0_PHY;
+ ath79_register_eth(0);
+
+ ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
+ tl_wa901nd_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
+ tl_wa901nd_v2_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
+ "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WA901N/ND v1 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define TL_WA901ND_GPIO_LED_QSS 0
+#define TL_WA901ND_GPIO_LED_SYSTEM 1
+#define TL_WA901ND_GPIO_LED_LAN 13
+
+#define TL_WA901ND_GPIO_BTN_RESET 11
+#define TL_WA901ND_GPIO_BTN_QSS 12
+
+#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wa901nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wa901nd_flash_data = {
+ .part_probes = tl_wa901nd_part_probes,
+};
+
+static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan",
+ .gpio = TL_WA901ND_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WA901ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WA901ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wa901nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ /*
+ * ath79_eth0 would be the WAN port, but is not connected on
+ * the TL-WA901ND. ath79_eth1 connects to the internal switch chip,
+ * however we have a single LAN port only.
+ */
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&tl_wa901nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
+ tl_wa901nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wa901nd_gpio_keys),
+ tl_wa901nd_gpio_keys);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
+ tl_wa901nd_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR1043N/ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtl8366.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR1043ND_GPIO_LED_USB 1
+#define TL_WR1043ND_GPIO_LED_SYSTEM 2
+#define TL_WR1043ND_GPIO_LED_QSS 5
+#define TL_WR1043ND_GPIO_LED_WLAN 9
+
+#define TL_WR1043ND_GPIO_BTN_RESET 3
+#define TL_WR1043ND_GPIO_BTN_QSS 7
+
+#define TL_WR1043ND_GPIO_RTL8366_SDA 18
+#define TL_WR1043ND_GPIO_RTL8366_SCK 19
+
+#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr1043nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr1043nd_flash_data = {
+ .part_probes = tl_wr1043nd_part_probes,
+};
+
+static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR1043ND_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR1043ND_GPIO_LED_QSS,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR1043ND_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR1043ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
+ .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
+ .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr1043nd_rtl8366rb_data,
+ }
+};
+
+static void __init tl_wr1043nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(&tl_wr1043nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
+ tl_wr1043nd_leds_gpio);
+
+ platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr1043nd_gpio_keys),
+ tl_wr1043nd_gpio_keys);
+
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
+ tl_wr1043nd_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR2543N/ND board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/rtl8367.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define TL_WR2543N_GPIO_LED_WPS 0
+#define TL_WR2543N_GPIO_LED_USB 8
+
+#define TL_WR2543N_GPIO_BTN_RESET 11
+#define TL_WR2543N_GPIO_BTN_WPS 12
+
+#define TL_WR2543N_GPIO_RTL8367_SDA 1
+#define TL_WR2543N_GPIO_RTL8367_SCK 6
+
+#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr2543n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr2543n_flash_data = {
+ .part_probes = tl_wr2543n_part_probes,
+ .max_read_len = 64,
+};
+
+static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:usb",
+ .gpio = TL_WR2543N_GPIO_LED_USB,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wps",
+ .gpio = TL_WR2543N_GPIO_LED_WPS,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR2543N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR2543N_GPIO_BTN_WPS,
+ }
+};
+
+static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
+ .mode = RTL8367_EXTIF_MODE_RGMII,
+ .txdelay = 1,
+ .rxdelay = 0,
+ .ability = {
+ .force_mode = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ .link = 1,
+ .duplex = 1,
+ .speed = RTL8367_PORT_SPEED_1000,
+ },
+};
+
+static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
+ .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
+ .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
+ .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
+};
+
+static struct platform_device tl_wr2543n_rtl8367_device = {
+ .name = RTL8367_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr2543n_rtl8367_data,
+ }
+};
+
+static void __init tl_wr2543n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr2543n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
+ tl_wr2543n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr2543n_gpio_keys),
+ tl_wr2543n_gpio_keys);
+ ath79_register_usb();
+ ap91_pci_init(eeprom, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
+ ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_pll_data.pll_1000 = 0x1a000000;
+
+ ath79_register_eth(0);
+
+ platform_device_register(&tl_wr2543n_rtl8367_device);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
+ tl_wr2543n_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR703N board support
+ *
+ * Copyright (C) 2011 dongyuqi <729650915@qq.com>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR703N_GPIO_LED_SYSTEM 27
+#define TL_WR703N_GPIO_BTN_RESET 11
+
+#define TL_WR703N_GPIO_USB_POWER 8
+
+#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr703n_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr703n_flash_data = {
+ .part_probes = tl_wr703n_part_probes,
+};
+
+static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:blue:system",
+ .gpio = TL_WR703N_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR703N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr703n_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr703n_flash_data);
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
+ tl_wr703n_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr703n_gpio_keys),
+ tl_wr703n_gpio_keys);
+
+ gpio_request(TL_WR703N_GPIO_USB_POWER, "USB power");
+ gpio_direction_output(TL_WR703N_GPIO_USB_POWER, 1);
+ ath79_register_usb();
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
+ tl_wr703n_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR741ND v4 board support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR741NDV4_GPIO_BTN_RESET 11
+#define TL_WR741NDV4_GPIO_BTN_WPS 26
+
+#define TL_WR741NDV4_GPIO_LED_WLAN 0
+#define TL_WR741NDV4_GPIO_LED_QSS 1
+#define TL_WR741NDV4_GPIO_LED_WAN 13
+#define TL_WR741NDV4_GPIO_LED_LAN1 14
+#define TL_WR741NDV4_GPIO_LED_LAN2 15
+#define TL_WR741NDV4_GPIO_LED_LAN3 16
+#define TL_WR741NDV4_GPIO_LED_LAN4 17
+
+#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
+
+#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr741ndv4_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr741ndv4_flash_data = {
+ .part_probes = tl_wr741ndv4_part_probes,
+};
+
+static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN1,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN2,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN3,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR741NDV4_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR741NDV4_GPIO_LED_QSS,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR741NDV4_GPIO_LED_WAN,
+ .active_low = 0,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR741NDV4_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741NDV4_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "WPS",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741NDV4_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr741ndv4_gmac_setup(void)
+{
+ void __iomem *base;
+ u32 t;
+
+ base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
+
+ t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
+ t |= (AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
+
+ iounmap(base);
+}
+
+static void __init tl_wr741ndv4_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ tl_wr741ndv4_gmac_setup();
+
+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
+ tl_wr741ndv4_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
+ tl_wr741ndv4_gpio_keys);
+
+ ath79_register_m25p80(&tl_wr741ndv4_flash_data);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_eth(1);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
+ "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR741ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define TL_WR741ND_GPIO_LED_QSS 0
+#define TL_WR741ND_GPIO_LED_SYSTEM 1
+#define TL_WR741ND_GPIO_LED_LAN1 13
+#define TL_WR741ND_GPIO_LED_LAN2 14
+#define TL_WR741ND_GPIO_LED_LAN3 15
+#define TL_WR741ND_GPIO_LED_LAN4 16
+#define TL_WR741ND_GPIO_LED_WAN 17
+
+#define TL_WR741ND_GPIO_BTN_RESET 11
+#define TL_WR741ND_GPIO_BTN_QSS 12
+
+#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr741nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr741nd_flash_data = {
+ .part_probes = tl_wr741nd_part_probes,
+};
+
+static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WR741ND_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WR741ND_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WR741ND_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WR741ND_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR741ND_GPIO_LED_QSS,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WR741ND_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR741ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static void __init tl_wr741nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_m25p80(&tl_wr741nd_flash_data);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
+ tl_wr741nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr741nd_gpio_keys),
+ tl_wr741nd_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+ ap91_pci_init(ee, mac);
+}
+MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
+ tl_wr741nd_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR841N/ND v1 board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
+#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4
+#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5
+
+#define TL_WR841ND_V1_GPIO_BTN_RESET 3
+#define TL_WR841ND_V1_GPIO_BTN_QSS 7
+
+#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition tl_wr841n_v1_partitions[] = {
+ {
+ .name = "redboot",
+ .offset = 0,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x020000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x160000,
+ .size = 0x280000,
+ }, {
+ .name = "config",
+ .offset = 0x3e0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x020000,
+ .size = 0x3c0000,
+ }
+};
+
+static struct flash_platform_data tl_wr841n_v1_flash_data = {
+ .parts = tl_wr841n_v1_partitions,
+ .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
+};
+
+static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
+ }
+};
+
+static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr841n_v1_dsa_chip,
+};
+
+static void __init tl_wr841n_v1_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
+ &tl_wr841n_v1_dsa_data);
+
+ ath79_register_m25p80(&tl_wr841n_v1_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
+ tl_wr841n_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
+ tl_wr841n_v1_gpio_keys);
+ ath79_register_pci();
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
+ tl_wr841n_v1_setup);
--- /dev/null
+/*
+ * TP-LINK TL-WR941ND board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-dsa.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define TL_WR941ND_GPIO_LED_SYSTEM 2
+#define TL_WR941ND_GPIO_LED_QSS_RED 4
+#define TL_WR941ND_GPIO_LED_QSS_GREEN 5
+#define TL_WR941ND_GPIO_LED_WLAN 9
+
+#define TL_WR941ND_GPIO_BTN_RESET 3
+#define TL_WR941ND_GPIO_BTN_QSS 7
+
+#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
+
+static const char *tl_wr941nd_part_probes[] = {
+ "tp-link",
+ NULL,
+};
+
+static struct flash_platform_data tl_wr941nd_flash_data = {
+ .part_probes = tl_wr941nd_part_probes,
+};
+
+static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:system",
+ .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:red:qss",
+ .gpio = TL_WR941ND_GPIO_LED_QSS_RED,
+ }, {
+ .name = "tp-link:green:qss",
+ .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN,
+ }, {
+ .name = "tp-link:green:wlan",
+ .gpio = TL_WR941ND_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "qss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR941ND_GPIO_BTN_QSS,
+ .active_low = 1,
+ }
+};
+
+static struct dsa_chip_data tl_wr941nd_dsa_chip = {
+ .port_names[0] = "wan",
+ .port_names[1] = "lan1",
+ .port_names[2] = "lan2",
+ .port_names[3] = "lan3",
+ .port_names[4] = "lan4",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data tl_wr941nd_dsa_data = {
+ .nr_chips = 1,
+ .chip = &tl_wr941nd_dsa_chip,
+};
+
+static void __init tl_wr941nd_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
+ &tl_wr941nd_dsa_data);
+
+ ath79_register_m25p80(&tl_wr941nd_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
+ tl_wr941nd_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr941nd_gpio_keys),
+ tl_wr941nd_gpio_keys);
+ ath79_register_wmac(eeprom, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
+ tl_wr941nd_setup);
--- /dev/null
+/*
+ * Ubiquiti RouterStation support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define UBNT_RS_GPIO_LED_RF 2
+#define UBNT_RS_GPIO_SW4 8
+
+#define UBNT_LS_SR71_GPIO_LED_D25 0
+#define UBNT_LS_SR71_GPIO_LED_D26 1
+#define UBNT_LS_SR71_GPIO_LED_D24 2
+#define UBNT_LS_SR71_GPIO_LED_D23 4
+#define UBNT_LS_SR71_GPIO_LED_D22 5
+#define UBNT_LS_SR71_GPIO_LED_D27 6
+#define UBNT_LS_SR71_GPIO_LED_D28 7
+
+#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */
+#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL)
+
+static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:rf",
+ .gpio = UBNT_RS_GPIO_LED_RF,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
+ {
+ .name = "ubnt:green:d22",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D22,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d23",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D23,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d24",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D24,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:red:d25",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D25,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:red:d26",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D26,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d27",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D27,
+ .active_low = 0,
+ }, {
+ .name = "ubnt:green:d28",
+ .gpio = UBNT_LS_SR71_GPIO_LED_D28,
+ .active_low = 0,
+ }
+};
+
+static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
+ {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = UBNT_RS_GPIO_SW4,
+ .active_low = 1,
+ }
+};
+
+static const char *ubnt_part_probes[] = {
+ "RedBoot",
+ NULL,
+};
+
+static struct flash_platform_data ubnt_flash_data = {
+ .part_probes = ubnt_part_probes,
+};
+
+static void __init ubnt_generic_setup(void)
+{
+ ath79_register_m25p80(&ubnt_flash_data);
+
+ ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(ubnt_gpio_keys),
+ ubnt_gpio_keys);
+ ath79_register_pci();
+}
+
+#define UBNT_RS_WAN_PHYMASK BIT(20)
+#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
+
+static void __init ubnt_rs_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
+
+ /*
+ * There is Secondary MAC address duplicate problem with some
+ * UBNT HW batches. Do not increase Secondary MAC address by 1
+ * but do workaround with 'Locally Administrated' bit.
+ */
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.speed = SPEED_100;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
+ ubnt_rs_setup);
+
+#define UBNT_RSPRO_WAN_PHYMASK BIT(4)
+#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+static void __init ubnt_rspro_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
+ UBNT_RSPRO_LAN_PHYMASK));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
+
+ /*
+ * There is Secondary MAC address duplicate problem with some
+ * UBNT HW batches. Do not increase Secondary MAC address by 1
+ * but do workaround with 'Locally Administrated' bit.
+ */
+ ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
+ ubnt_rs_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
+ ubnt_rspro_setup);
+
+static void __init ubnt_lsx_setup(void)
+{
+ ubnt_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
+
+#define UBNT_LSSR71_PHY_MASK BIT(1)
+
+static void __init ubnt_lssr71_setup(void)
+{
+ ubnt_generic_setup();
+
+ ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
+
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
+ ubnt_ls_sr71_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
+ ubnt_lssr71_setup);
--- /dev/null
+/*
+ * Buffalo WHR-HP-G300N board support
+ *
+ * based on ...
+ *
+ * TP-LINK TL-WR741ND board support
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WHRHPG300N_GPIO_LED_SECURITY 0
+#define WHRHPG300N_GPIO_LED_DIAG 1
+#define WHRHPG300N_GPIO_LED_ROUTER 6
+
+#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
+#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
+#define WHRHPG300N_GPIO_BTN_RESET 11
+#define WHRHPG300N_GPIO_BTN_AOSS 12
+#define WHRHPG300N_GPIO_LED_LAN1 13
+#define WHRHPG300N_GPIO_LED_LAN2 14
+#define WHRHPG300N_GPIO_LED_LAN3 15
+#define WHRHPG300N_GPIO_LED_LAN4 16
+#define WHRHPG300N_GPIO_LED_WAN 17
+
+#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
+
+#define WHRHPG300N_MAC_OFFSET 0x20c
+
+static struct mtd_partition whrhpg300n_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x03e000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x03e000,
+ .size = 0x002000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x040000,
+ .size = 0x0e0000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2c0000,
+ }, {
+ .name = "user_property",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ }, {
+ .name = "ART",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x3a0000,
+ }
+};
+
+static struct flash_platform_data whrhpg300n_flash_data = {
+ .parts = whrhpg300n_partitions,
+ .nr_parts = ARRAY_SIZE(whrhpg300n_partitions),
+};
+
+static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:orange:security",
+ .gpio = WHRHPG300N_GPIO_LED_SECURITY,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:diag",
+ .gpio = WHRHPG300N_GPIO_LED_DIAG,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:router",
+ .gpio = WHRHPG300N_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:wan",
+ .gpio = WHRHPG300N_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan1",
+ .gpio = WHRHPG300N_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan2",
+ .gpio = WHRHPG300N_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan3",
+ .gpio = WHRHPG300N_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:lan4",
+ .gpio = WHRHPG300N_GPIO_LED_LAN4,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WHRHPG300N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "aoss/wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .gpio = WHRHPG300N_GPIO_BTN_AOSS,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
+ .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ }
+};
+
+static void __init whrhpg300n_setup(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
+
+ ath79_register_m25p80(&whrhpg300n_flash_data);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
+ whrhpg300n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(whrhpg300n_gpio_keys),
+ whrhpg300n_gpio_keys);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+ /* WAN port */
+ ath79_register_eth(0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 1);
+
+ ap91_pci_init(ee, mac);
+}
+
+MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
+ whrhpg300n_setup);
+
+MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
+ whrhpg300n_setup);
+
+MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
+ whrhpg300n_setup);
--- /dev/null
+/*
+ * Netgear WNDR3700 board support
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WNDR3700_GPIO_LED_WPS_ORANGE 0
+#define WNDR3700_GPIO_LED_POWER_ORANGE 1
+#define WNDR3700_GPIO_LED_POWER_GREEN 2
+#define WNDR3700_GPIO_LED_WPS_GREEN 4
+#define WNDR3700_GPIO_LED_WAN_GREEN 6
+
+#define WNDR3700_GPIO_BTN_WPS 3
+#define WNDR3700_GPIO_BTN_RESET 8
+#define WNDR3700_GPIO_BTN_WIFI 11
+
+#define WNDR3700_GPIO_RTL8366_SDA 5
+#define WNDR3700_GPIO_RTL8366_SCK 7
+
+#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
+
+#define WNDR3700_ETH0_MAC_OFFSET 0
+#define WNDR3700_ETH1_MAC_OFFSET 0x6
+
+#define WNDR3700_WMAC0_MAC_OFFSET 0
+#define WNDR3700_WMAC1_MAC_OFFSET 0xc
+#define WNDR3700_CALDATA0_OFFSET 0x1000
+#define WNDR3700_CALDATA1_OFFSET 0x5000
+
+static struct gpio_led wndr3700_leds_gpio[] __initdata = {
+ {
+ .name = "wndr3700:green:power",
+ .gpio = WNDR3700_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:orange:power",
+ .gpio = WNDR3700_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:green:wps",
+ .gpio = WNDR3700_GPIO_LED_WPS_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:orange:wps",
+ .gpio = WNDR3700_GPIO_LED_WPS_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "wndr3700:green:wan",
+ .gpio = WNDR3700_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_WPS,
+ .active_low = 1,
+ }, {
+ .desc = "wifi",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNDR3700_GPIO_BTN_WIFI,
+ .active_low = 1,
+ }
+};
+
+static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
+ .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
+ .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wndr3700_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wndr3700_rtl8366s_data,
+ }
+};
+
+static void __init wndr3700_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ /*
+ * The eth0 and wmac0 interfaces share the same MAC address which
+ * can lead to problems if operated unbridged. Set the locally
+ * administered bit on the eth0 MAC to make it unique.
+ */
+ ath79_init_local_mac(ath79_eth0_data.mac_addr,
+ art + WNDR3700_ETH0_MAC_OFFSET);
+ ath79_eth0_pll_data.pll_1000 = 0x11110000;
+ ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr,
+ art + WNDR3700_ETH1_MAC_OFFSET, 0);
+ ath79_eth1_pll_data.pll_1000 = 0x11110000;
+ ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
+ wndr3700_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wndr3700_gpio_keys),
+ wndr3700_gpio_keys);
+
+ platform_device_register(&wndr3700_rtl8366s_device);
+ platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
+
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_led_pin(1, 5);
+
+ /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
+ ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
+
+ /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
+ ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
+
+ ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
+ art + WNDR3700_WMAC0_MAC_OFFSET,
+ art + WNDR3700_CALDATA1_OFFSET,
+ art + WNDR3700_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
+ "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
+ wndr3700_setup);
--- /dev/null
+/*
+ * NETGEAR WNR2000 board support
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WNR2000_GPIO_LED_PWR_GREEN 14
+#define WNR2000_GPIO_LED_PWR_AMBER 7
+#define WNR2000_GPIO_LED_WPS 4
+#define WNR2000_GPIO_LED_WLAN 6
+#define WNR2000_GPIO_BTN_RESET 21
+#define WNR2000_GPIO_BTN_WPS 8
+
+#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wnr2000_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x240000,
+ }, {
+ .name = "user-config",
+ .offset = 0x290000,
+ .size = 0x010000,
+ }, {
+ .name = "uImage",
+ .offset = 0x2a0000,
+ .size = 0x120000,
+ }, {
+ .name = "language_table",
+ .offset = 0x3c0000,
+ .size = 0x020000,
+ }, {
+ .name = "rootfs_checksum",
+ .offset = 0x3e0000,
+ .size = 0x010000,
+ }, {
+ .name = "art",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data wnr2000_flash_data = {
+ .parts = wnr2000_partitions,
+ .nr_parts = ARRAY_SIZE(wnr2000_partitions),
+};
+
+static struct gpio_led wnr2000_leds_gpio[] __initdata = {
+ {
+ .name = "wnr2000:green:power",
+ .gpio = WNR2000_GPIO_LED_PWR_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000:amber:power",
+ .gpio = WNR2000_GPIO_LED_PWR_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000:green:wps",
+ .gpio = WNR2000_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "wnr2000:blue:wlan",
+ .gpio = WNR2000_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000_GPIO_BTN_RESET,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WNR2000_GPIO_BTN_WPS,
+ }
+};
+
+static void __init wnr2000_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.has_ar8216 = 1;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wnr2000_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
+ wnr2000_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wnr2000_gpio_keys),
+ wnr2000_gpio_keys);
+
+ ath79_register_wmac(eeprom, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
--- /dev/null
+/*
+ * Compex WP543/WPJ543 board support
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WP543_GPIO_SW6 2
+#define WP543_GPIO_LED_1 3
+#define WP543_GPIO_LED_2 4
+#define WP543_GPIO_LED_WLAN 5
+#define WP543_GPIO_LED_CONN 6
+#define WP543_GPIO_LED_DIAG 7
+#define WP543_GPIO_SW4 8
+
+#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wp543_leds_gpio[] __initdata = {
+ {
+ .name = "wp543:green:led1",
+ .gpio = WP543_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:led2",
+ .gpio = WP543_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:wlan",
+ .gpio = WP543_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:conn",
+ .gpio = WP543_GPIO_LED_CONN,
+ .active_low = 1,
+ }, {
+ .name = "wp543:green:diag",
+ .gpio = WP543_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
+ {
+ .desc = "sw6",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WP543_GPIO_SW6,
+ }, {
+ .desc = "sw4",
+ .type = EV_KEY,
+ .code = BTN_1,
+ .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WP543_GPIO_SW4,
+ }
+};
+
+static const char *wp543_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wp543_flash_data = {
+ .part_probes = wp543_part_probes,
+};
+
+static void __init wp543_setup(void)
+{
+ ath79_register_m25p80(&wp543_flash_data);
+
+ ath79_register_mdio(0, 0xfffffff0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = 0x0f;
+ ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
+ AR71XX_RESET_GE0_PHY;
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
+ wp543_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wp543_gpio_keys),
+ wp543_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
--- /dev/null
+/*
+ * Compex WPE72 board support
+ *
+ * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include<asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define WPE72_GPIO_RESET 12
+#define WPE72_GPIO_LED_DIAG 13
+#define WPE72_GPIO_LED_1 14
+#define WPE72_GPIO_LED_2 15
+#define WPE72_GPIO_LED_3 16
+#define WPE72_GPIO_LED_4 17
+
+#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
+
+static struct gpio_led wpe72_leds_gpio[] __initdata = {
+ {
+ .name = "wpe72:green:led1",
+ .gpio = WPE72_GPIO_LED_1,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led2",
+ .gpio = WPE72_GPIO_LED_2,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led3",
+ .gpio = WPE72_GPIO_LED_3,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:led4",
+ .gpio = WPE72_GPIO_LED_4,
+ .active_low = 1,
+ }, {
+ .name = "wpe72:green:diag",
+ .gpio = WPE72_GPIO_LED_DIAG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WPE72_GPIO_RESET,
+ }
+};
+
+static const char *wpe72_part_probes[] = {
+ "MyLoader",
+ NULL,
+};
+
+static struct flash_platform_data wpe72_flash_data = {
+ .part_probes = wpe72_part_probes,
+};
+
+static void __init wpe72_setup(void)
+{
+ ath79_register_m25p80(&wpe72_flash_data);
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_pci();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
+ wpe72_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wpe72_gpio_keys),
+ wpe72_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
--- /dev/null
+/*
+ * Linksys WRT160NL board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "nvram.h"
+#include "machtypes.h"
+
+#define WRT160NL_GPIO_LED_POWER 14
+#define WRT160NL_GPIO_LED_WPS_AMBER 9
+#define WRT160NL_GPIO_LED_WPS_BLUE 8
+#define WRT160NL_GPIO_LED_WLAN 6
+
+#define WRT160NL_GPIO_BTN_WPS 7
+#define WRT160NL_GPIO_BTN_RESET 21
+
+#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL)
+
+#define WRT160NL_NVRAM_ADDR 0x1f7e0000
+#define WRT160NL_NVRAM_SIZE 0x10000
+
+static const char *wrt160nl_part_probes[] = {
+ "wrt160nl",
+ NULL,
+};
+
+static struct flash_platform_data wrt160nl_flash_data = {
+ .part_probes = wrt160nl_part_probes,
+};
+
+static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
+ {
+ .name = "wrt160nl:blue:power",
+ .gpio = WRT160NL_GPIO_LED_POWER,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ }, {
+ .name = "wrt160nl:amber:wps",
+ .gpio = WRT160NL_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wrt160nl:blue:wps",
+ .gpio = WRT160NL_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "wrt160nl:blue:wlan",
+ .gpio = WRT160NL_GPIO_LED_WLAN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRT160NL_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WRT160NL_GPIO_BTN_WPS,
+ .active_low = 1,
+ }
+};
+
+static void __init wrt160nl_setup(void)
+{
+ const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 mac[6];
+
+ if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+ "lan_hwaddr=", mac) == 0) {
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ }
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.phy_mask = 0x01;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wrt160nl_flash_data);
+
+ ath79_register_usb();
+
+ if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
+ "wl0_hwaddr=", mac) == 0)
+ ath79_register_wmac(eeprom, mac);
+ else
+ ath79_register_wmac(eeprom, NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
+ wrt160nl_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrt160nl_gpio_keys),
+ wrt160nl_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
+ wrt160nl_setup);
--- /dev/null
+/*
+ * Linksys WRT400N board support
+ *
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define WRT400N_GPIO_LED_POWER 1
+#define WRT400N_GPIO_LED_WPS_BLUE 4
+#define WRT400N_GPIO_LED_WPS_AMBER 5
+#define WRT400N_GPIO_LED_WLAN 6
+
+#define WRT400N_GPIO_BTN_RESET 8
+#define WRT400N_GPIO_BTN_WLSEC 3
+
+#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL)
+
+#define WRT400N_MAC_ADDR_OFFSET 0x120c
+#define WRT400N_CALDATA0_OFFSET 0x1000
+#define WRT400N_CALDATA1_OFFSET 0x5000
+
+static struct mtd_partition wrt400n_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "env",
+ .offset = 0x030000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "linux",
+ .offset = 0x040000,
+ .size = 0x140000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x180000,
+ .size = 0x630000,
+ }, {
+ .name = "nvram",
+ .offset = 0x7b0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "factory",
+ .offset = 0x7c0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "language",
+ .offset = 0x7d0000,
+ .size = 0x020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "caldata",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x040000,
+ .size = 0x770000,
+ }
+};
+
+static struct flash_platform_data wrt400n_flash_data = {
+ .parts = wrt400n_partitions,
+ .nr_parts = ARRAY_SIZE(wrt400n_partitions),
+};
+
+static struct gpio_led wrt400n_leds_gpio[] __initdata = {
+ {
+ .name = "wrt400n:blue:wps",
+ .gpio = WRT400N_GPIO_LED_WPS_BLUE,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:amber:wps",
+ .gpio = WRT400N_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:blue:wlan",
+ .gpio = WRT400N_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "wrt400n:blue:power",
+ .gpio = WRT400N_GPIO_LED_POWER,
+ .active_low = 0,
+ .default_trigger = "default-on",
+ }
+};
+
+static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
+ .gpio = WRT400N_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "wlsec",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
+ .gpio = WRT400N_GPIO_BTN_WLSEC,
+ .active_low = 1,
+ }
+};
+
+static void __init wrt400n_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
+
+ ath79_register_mdio(0, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_m25p80(&wrt400n_flash_data);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
+ wrt400n_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wrt400n_gpio_keys),
+ wrt400n_gpio_keys);
+
+ ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
+ art + WRT400N_CALDATA1_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
--- /dev/null
+/*
+ * Buffalo WZR-HP-AG300H board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPAG300H_MAC_OFFSET 0x20c
+#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpag300h_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e90000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1ff0000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f90000,
+ }
+};
+
+static struct flash_platform_data wzrhpag300h_flash_data = {
+ .parts = wzrhpag300h_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
+};
+
+static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 1,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 3,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 5,
+ .active_low = 1,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .desc = "router_off",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 1,
+ }
+};
+
+static void __init wzrhpag300h_setup(void)
+{
+ u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
+ u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
+ u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
+
+ ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = BIT(4);
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ gpio_request(2, "usb");
+ gpio_direction_output(2, 1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
+ wzrhpag300h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpag300h_gpio_keys),
+ wzrhpag300h_gpio_keys);
+
+ ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
+
+ ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
+ "Buffalo WZR-HP-AG300H", wzrhpag300h_setup);
+
--- /dev/null
+/*
+ * Buffalo WZR-HP-G300NH board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/nxp_74hc153.h>
+#include <linux/rtl8366.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define WZRHPG300NH_GPIO_LED_USB 0
+#define WZRHPG300NH_GPIO_LED_DIAG 1
+#define WZRHPG300NH_GPIO_LED_WIRELESS 6
+#define WZRHPG300NH_GPIO_LED_SECURITY 17
+#define WZRHPG300NH_GPIO_LED_ROUTER 18
+
+#define WZRHPG300NH_GPIO_RTL8366_SDA 19
+#define WZRHPG300NH_GPIO_RTL8366_SCK 20
+
+#define WZRHPG300NH_GPIO_74HC153_S0 9
+#define WZRHPG300NH_GPIO_74HC153_S1 11
+#define WZRHPG300NH_GPIO_74HC153_1Y 12
+#define WZRHPG300NH_GPIO_74HC153_2Y 14
+
+#define WZRHPG300NH_GPIO_EXP_BASE 32
+#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0)
+#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2)
+#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3)
+#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5)
+#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
+#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7)
+
+#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
+
+#define WZRHPG300NH_MAC_OFFSET 0x20c
+
+static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e60000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1fc0000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x1fe0000,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f60000,
+ }
+};
+
+static struct physmap_flash_data wzrhpg300nh_flash_data = {
+ .width = 2,
+ .parts = wzrhpg300nh_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
+};
+
+#define WZRHPG300NH_FLASH_BASE 0x1e000000
+#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024)
+
+static struct resource wzrhpg300nh_flash_resources[] = {
+ [0] = {
+ .start = WZRHPG300NH_FLASH_BASE,
+ .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device wzrhpg300nh_flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = wzrhpg300nh_flash_resources,
+ .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources),
+ .dev = {
+ .platform_data = &wzrhpg300nh_flash_data,
+ }
+};
+
+static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:orange:security",
+ .gpio = WZRHPG300NH_GPIO_LED_SECURITY,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:wireless",
+ .gpio = WZRHPG300NH_GPIO_LED_WIRELESS,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:green:router",
+ .gpio = WZRHPG300NH_GPIO_LED_ROUTER,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:red:diag",
+ .gpio = WZRHPG300NH_GPIO_LED_DIAG,
+ .active_low = 1,
+ }, {
+ .name = "buffalo:blue:usb",
+ .gpio = WZRHPG300NH_GPIO_LED_USB,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_AOSS,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_USB,
+ .active_low = 1,
+ }, {
+ .desc = "qos_on",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON,
+ .active_low = 0,
+ }, {
+ .desc = "qos_off",
+ .type = EV_KEY,
+ .code = BTN_4,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF,
+ .active_low = 0,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON,
+ .active_low = 0,
+ }, {
+ .desc = "router_auto",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
+ .active_low = 0,
+ }
+};
+
+static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
+ .gpio_base = WZRHPG300NH_GPIO_EXP_BASE,
+ .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0,
+ .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1,
+ .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y,
+ .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y,
+};
+
+static struct platform_device wzrhpg300nh_74hc153_device = {
+ .name = NXP_74HC153_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_74hc153_data,
+ }
+};
+
+static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
+ .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
+ .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device wzrhpg300nh_rtl8366s_device = {
+ .name = RTL8366S_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_rtl8366_data,
+ }
+};
+
+static struct platform_device wzrhpg300nh_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &wzrhpg300nh_rtl8366_data,
+ }
+};
+
+static void __init wzrhpg300nh_setup(void)
+{
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
+ bool hasrtl8366rb = false;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
+ hasrtl8366rb = true;
+
+ if (hasrtl8366rb) {
+ ath79_eth0_pll_data.pll_1000 = 0x1f000000;
+ ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x100;
+ ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
+ } else {
+ ath79_eth0_pll_data.pll_1000 = 0x1e000100;
+ ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ ath79_eth1_pll_data.pll_1000 = 0x1e000100;
+ ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
+ }
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth1_data.phy_mask = 0x10;
+
+ ath79_register_eth(0);
+ ath79_register_eth(1);
+
+ ath79_register_usb();
+ ath79_register_wmac(eeprom, NULL);
+
+ platform_device_register(&wzrhpg300nh_74hc153_device);
+ platform_device_register(&wzrhpg300nh_flash_device);
+
+ if (hasrtl8366rb)
+ platform_device_register(&wzrhpg300nh_rtl8366rb_device);
+ else
+ platform_device_register(&wzrhpg300nh_rtl8366s_device);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
+ wzrhpg300nh_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg300nh_gpio_keys),
+ wzrhpg300nh_gpio_keys);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
+ "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
--- /dev/null
+/*
+ * Buffalo WZR-HP-G300NH2 board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPG300NH2_MAC_OFFSET 0x20c
+#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "art",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "kernel",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e90000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1ff0000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f90000,
+ }
+};
+
+static struct flash_platform_data wzrhpg300nh2_flash_data = {
+ .parts = wzrhpg300nh2_flash_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
+};
+
+static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 16,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
+ {
+ .name = "buffalo:blue:usb",
+ .gpio = 4,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:orange:security",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine_on",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:movie_engine_off",
+ .gpio = 9,
+ .active_low = 1,
+ },
+};
+
+/* The AOSS button is wmac gpio 12 */
+static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 1,
+ }, {
+ .desc = "qos",
+ .type = EV_KEY,
+ .code = BTN_3,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 11,
+ .active_low = 0,
+ }, {
+ .desc = "router_on",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 0,
+ },
+};
+
+static void __init wzrhpg300nh2_setup(void)
+{
+
+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
+ /* There is an eth1 but it is not connected to the switch */
+
+ ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_register_mdio(0, ~(BIT(0)));
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+ ath79_register_usb();
+ /* gpio13 is usb power. Turn it on. */
+ gpio_request(13, "usb");
+ gpio_direction_output(13, 1);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
+ wzrhpg300nh2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
+ wzrhpg300nh2_gpio_keys);
+ ap9x_pci_setup_wmac_led_pin(0, 5);
+ ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
+ ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
+
+ ap91_pci_init(eeprom, mac0);
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
+ "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
--- /dev/null
+/*
+ * Buffalo WZR-HP-G450G board support
+ *
+ * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/mach-ath79/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition wzrhpg450h_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x0040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x0040000,
+ .size = 0x0010000,
+ }, {
+ .name = "ART",
+ .offset = 0x0050000,
+ .size = 0x0010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "uImage",
+ .offset = 0x0060000,
+ .size = 0x0100000,
+ }, {
+ .name = "rootfs",
+ .offset = 0x0160000,
+ .size = 0x1e80000,
+ }, {
+ .name = "user_property",
+ .offset = 0x1fe0000,
+ .size = 0x0020000,
+ }, {
+ .name = "firmware",
+ .offset = 0x0060000,
+ .size = 0x1f80000,
+ }
+};
+
+static struct flash_platform_data wzrhpg450h_flash_data = {
+ .parts = wzrhpg450h_partitions,
+ .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
+};
+
+static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:diag",
+ .gpio = 14,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:orange:security",
+ .gpio = 13,
+ .active_low = 1,
+ },
+};
+
+
+static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
+ {
+ .name = "buffalo:blue:movie_engine",
+ .gpio = 13,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:router",
+ .gpio = 14,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .desc = "usb",
+ .type = EV_KEY,
+ .code = BTN_2,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 1,
+ .active_low = 1,
+ }, {
+ .desc = "aoss",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 8,
+ .active_low = 1,
+ }, {
+ .desc = "movie_engine",
+ .type = EV_KEY,
+ .code = BTN_6,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 7,
+ .active_low = 0,
+ }, {
+ .desc = "router_off",
+ .type = EV_KEY,
+ .code = BTN_5,
+ .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 0,
+ }
+};
+
+
+static void __init wzrhpg450h_init(void)
+{
+ u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
+ u8 *mac = (u8 *) ee + 2;
+
+ ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
+
+ ath79_register_mdio(0, ~BIT(0));
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
+ wzrhpg450h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(wzrhpg450h_gpio_keys),
+ wzrhpg450h_gpio_keys);
+
+ ath79_register_eth(0);
+
+ ath79_register_usb();
+ gpio_request(16, "usb");
+ gpio_direction_output(16, 1);
+
+ ap91_pci_init(ee, NULL);
+ ap9x_pci_setup_wmac_led_pin(0, 15);
+ ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
+ ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
+}
+
+MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
+ wzrhpg450h_init);
--- /dev/null
+/*
+ * Zcomax ZCN-1523H-2-8/5-16 board support
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-m25p80.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "machtypes.h"
+
+#define ZCN_1523H_GPIO_BTN_RESET 0
+#define ZCN_1523H_GPIO_LED_INIT 11
+#define ZCN_1523H_GPIO_LED_LAN1 17
+
+#define ZCN_1523H_2_GPIO_LED_WEAK 13
+#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
+#define ZCN_1523H_2_GPIO_LED_STRONG 15
+
+#define ZCN_1523H_5_GPIO_LED_UNKNOWN 1
+#define ZCN_1523H_5_GPIO_LED_LAN2 13
+#define ZCN_1523H_5_GPIO_LED_WEAK 14
+#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
+#define ZCN_1523H_5_GPIO_LED_STRONG 16
+
+#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */
+#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition zcn_1523h_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "u-boot-env",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "rootfs",
+ .offset = 0x050000,
+ .size = 0x610000,
+ }, {
+ .name = "kernel",
+ .offset = 0x660000,
+ .size = 0x170000,
+ }, {
+ .name = "configure",
+ .offset = 0x7d0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "mfg",
+ .offset = 0x7e0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "eeprom",
+ .offset = 0x7f0000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x780000,
+ }
+};
+
+static struct flash_platform_data zcn_1523h_flash_data = {
+ .parts = zcn_1523h_partitions,
+ .nr_parts = ARRAY_SIZE(zcn_1523h_partitions),
+};
+
+static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = ZCN_1523H_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:amber:init",
+ .gpio = ZCN_1523H_GPIO_LED_INIT,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan1",
+ .gpio = ZCN_1523H_GPIO_LED_LAN1,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_2_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_2_GPIO_LED_STRONG,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
+ {
+ .name = "zcn-1523h:red:weak",
+ .gpio = ZCN_1523H_5_GPIO_LED_WEAK,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:medium",
+ .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:strong",
+ .gpio = ZCN_1523H_5_GPIO_LED_STRONG,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:green:lan2",
+ .gpio = ZCN_1523H_5_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "zcn-1523h:amber:unknown",
+ .gpio = ZCN_1523H_5_GPIO_LED_UNKNOWN,
+ }
+};
+
+static void __init zcn_1523h_generic_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
+
+ ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
+ AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
+
+ ath79_register_m25p80(&zcn_1523h_flash_data);
+
+ ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
+ zcn_1523h_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(zcn_1523h_gpio_keys),
+ zcn_1523h_gpio_keys);
+
+ ap91_pci_init(ee, mac);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN1 port */
+ ath79_register_eth(0);
+}
+
+static void __init zcn_1523h_2_setup(void)
+{
+ zcn_1523h_generic_setup();
+ ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
+
+ ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
+ zcn_1523h_2_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
+ zcn_1523h_2_setup);
+
+static void __init zcn_1523h_5_setup(void)
+{
+ zcn_1523h_generic_setup();
+ ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
+
+ ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
+ zcn_1523h_5_leds_gpio);
+
+ /* LAN2 port */
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
+ zcn_1523h_5_setup);
--- /dev/null
+/*
+ * Atheros AR71xx minimal nvram support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include "nvram.h"
+
+char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
+{
+ unsigned len = strlen(name);
+ char *cur, *last;
+
+ if (buf_len == 0 || len == 0)
+ return NULL;
+
+ if (buf_len < len)
+ return NULL;
+
+ if (len == 1)
+ return memchr(buf, (int) *name, buf_len);
+
+ last = (char *) buf + buf_len - len;
+ for (cur = (char *) buf; cur <= last; cur++)
+ if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
+ return cur + len;
+
+ return NULL;
+}
+
+int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+ const char *name, char *mac)
+{
+ char *buf;
+ char *mac_str;
+ int ret;
+ int t;
+
+ buf = vmalloc(nvram_len);
+ if (!buf)
+ return -ENOMEM;
+
+ memcpy(buf, nvram, nvram_len);
+ buf[nvram_len - 1] = '\0';
+
+ mac_str = ath79_nvram_find_var(name, buf, nvram_len);
+ if (!mac_str) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+ if (t != 6) {
+ ret = -EINVAL;
+ goto free;
+ }
+
+ ret = 0;
+
+free:
+ vfree(buf);
+ return ret;
+}
--- /dev/null
+/*
+ * Atheros AR71xx minimal nvram support
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _ATH79_NVRAM_H
+#define _ATH79_NVRAM_H
+
+char *ath79_nvram_find_var(const char *name, const char *buf,
+ unsigned buf_len);
+int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
+ const char *name, char *mac);
+
+#endif /* _ATH79_NVRAM_H */
--- /dev/null
+/*
+ * Atheros AP94 reference board PCI initialization
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/pci.h>
+
+struct ath9k_fixup {
+ u16 *cal_data;
+ unsigned slot;
+};
+
+static int ath9k_num_fixups;
+static struct ath9k_fixup ath9k_fixups[2];
+
+static void ath9k_pci_fixup(struct pci_dev *dev)
+{
+ void __iomem *mem;
+ u16 *cal_data = NULL;
+ u16 cmd;
+ u32 bar0;
+ u32 val;
+ unsigned i;
+
+ for (i = 0; i < ath9k_num_fixups; i++) {
+ if (ath9k_fixups[i].cal_data == NULL)
+ continue;
+
+ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
+ continue;
+
+ cal_data = ath9k_fixups[i].cal_data;
+ break;
+ }
+
+ if (cal_data == NULL)
+ return;
+
+ if (*cal_data != 0xa55a) {
+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
+ return;
+ }
+
+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
+
+ mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
+ if (!mem) {
+ pr_err("pci %s: ioremap error\n", pci_name(dev));
+ return;
+ }
+
+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
+
+ switch (ath79_soc) {
+ case ATH79_SOC_AR7161:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
+ AR71XX_PCI_MEM_BASE);
+ break;
+ case ATH79_SOC_AR7240:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
+ break;
+
+ case ATH79_SOC_AR7241:
+ case ATH79_SOC_AR7242:
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
+ break;
+
+ default:
+ BUG();
+ }
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ /* set pointer to first reg address */
+ cal_data += 3;
+ while (*cal_data != 0xffff) {
+ u32 reg;
+ reg = *cal_data++;
+ val = *cal_data++;
+ val |= (*cal_data++) << 16;
+
+ __raw_writel(val, mem + reg);
+ udelay(100);
+ }
+
+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
+ dev->vendor = val & 0xffff;
+ dev->device = (val >> 16) & 0xffff;
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
+ dev->revision = val & 0xff;
+ dev->class = val >> 8; /* upper 3 bytes */
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
+
+ iounmap(mem);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+
+void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
+{
+ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+ return;
+
+ ath9k_fixups[ath9k_num_fixups].slot = slot;
+ ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
+ ath9k_num_fixups++;
+}
--- /dev/null
+#ifndef _PCI_ATH9K_FIXUP
+#define _PCI_ATH9K_FIXUP
+
+void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
+
+#endif /* _PCI_ATH9K_FIXUP */
--- /dev/null
+/*
+ * Atheros AR71xx SoC specific platform data definitions
+ *
+ * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __ASM_MACH_ATH79_PLATFORM_H
+#define __ASM_MACH_ATH79_PLATFORM_H
+
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/phy.h>
+#include <linux/spi/spi.h>
+
+struct ag71xx_switch_platform_data {
+ u8 phy4_mii_en:1;
+};
+
+struct ag71xx_platform_data {
+ phy_interface_t phy_if_mode;
+ u32 phy_mask;
+ int speed;
+ int duplex;
+ u32 reset_bit;
+ u8 mac_addr[ETH_ALEN];
+ struct device *mii_bus_dev;
+
+ u8 has_gbit:1;
+ u8 is_ar91xx:1;
+ u8 is_ar7240:1;
+ u8 is_ar724x:1;
+ u8 has_ar8216:1;
+
+ struct ag71xx_switch_platform_data *switch_data;
+
+ void (*ddr_flush)(void);
+ void (*set_speed)(int speed);
+
+ u32 fifo_cfg1;
+ u32 fifo_cfg2;
+ u32 fifo_cfg3;
+};
+
+struct ag71xx_mdio_platform_data {
+ u32 phy_mask;
+ int is_ar7240;
+};
+
+#endif /* __ASM_MACH_ATH79_PLATFORM_H */
--- /dev/null
+/*
+ * MikroTik RouterBOARD 750 definitions
+ *
+ * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+#ifndef _MACH_RB750_H
+#define _MACH_RB750_H
+
+#include <linux/bitops.h>
+
+#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */
+#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */
+#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */
+#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */
+#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */
+#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */
+#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */
+#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */
+#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */
+#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */
+#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */
+#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */
+#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */
+#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */
+#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */
+
+#define RB750_GPIO_BTN_RESET 1
+#define RB750_GPIO_SPI_CS0 2
+#define RB750_GPIO_LED_ACT 12
+#define RB750_GPIO_LED_PORT1 13
+#define RB750_GPIO_LED_PORT2 14
+#define RB750_GPIO_LED_PORT3 15
+#define RB750_GPIO_LED_PORT4 16
+#define RB750_GPIO_LED_PORT5 17
+
+#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT)
+#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1)
+#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2)
+#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3)
+#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4)
+#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5)
+
+#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE)
+
+#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
+ RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
+
+struct rb750_led_data {
+ char *name;
+ char *default_trigger;
+ u32 mask;
+ int active_low;
+};
+
+struct rb750_led_platform_data {
+ int num_leds;
+ struct rb750_led_data *leds;
+};
+
+int rb750_latch_change(u32 mask_clr, u32 mask_set);
+void rb750_nand_pins_enable(void);
+void rb750_nand_pins_disable(void);
+
+#endif /* _MACH_RB750_H */
\ No newline at end of file
--- /dev/null
+/*
+ * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was based on the patches for Linux 2.6.27.39 published by
+ * MikroTik for their RouterBoard 4xx series devices.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#define CPLD_GPIO_nLED1 0
+#define CPLD_GPIO_nLED2 1
+#define CPLD_GPIO_nLED3 2
+#define CPLD_GPIO_nLED4 3
+#define CPLD_GPIO_FAN 4
+#define CPLD_GPIO_ALE 5
+#define CPLD_GPIO_CLE 6
+#define CPLD_GPIO_nCE 7
+#define CPLD_GPIO_nLED5 8
+
+#define CPLD_NUM_GPIOS 9
+
+#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
+#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
+#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
+#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
+#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
+#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
+#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
+#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
+#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
+
+struct rb4xx_cpld_platform_data {
+ unsigned gpio_base;
+};
+
+extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
+extern int rb4xx_cpld_read(unsigned char *rx_buf,
+ const unsigned char *verify_buf,
+ unsigned cnt);
+extern int rb4xx_cpld_read_from(unsigned addr,
+ unsigned char *rx_buf,
+ const unsigned char *verify_buf,
+ unsigned cnt);
+extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
--- /dev/null
+config AG71XX
+ tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
+ depends on ATH79
+ select PHYLIB
+ help
+ If you wish to compile a kernel for AR7XXX/91XXX and enable
+ ethernet support, then you should always answer Y to this.
+
+if AG71XX
+
+config AG71XX_DEBUG
+ bool "Atheros AR71xx built-in ethernet driver debugging"
+ default n
+ help
+ Atheros AR71xx built-in ethernet driver debugging messages.
+
+config AG71XX_DEBUG_FS
+ bool "Atheros AR71xx built-in ethernet driver debugfs support"
+ depends on DEBUG_FS
+ default n
+ help
+ Say Y, if you need access to various statistics provided by
+ the ag71xx driver.
+
+config AG71XX_AR8216_SUPPORT
+ bool "special support for the Atheros AR8216 switch"
+ default n
+ default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU
+ help
+ Say 'y' here if you want to enable special support for the
+ Atheros AR8216 switch found on some boards.
+
+endif
--- /dev/null
+#
+# Makefile for the Atheros AR71xx built-in ethernet macs
+#
+
+ag71xx-y += ag71xx_main.o
+ag71xx-y += ag71xx_ethtool.o
+ag71xx-y += ag71xx_phy.o
+ag71xx-y += ag71xx_mdio.o
+ag71xx-y += ag71xx_ar7240.o
+
+ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o
+ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o
+
+obj-$(CONFIG_AG71XX) += ag71xx.o
+
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __AG71XX_H
+#define __AG71XX_H
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/random.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/phy.h>
+#include <linux/skbuff.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/bitops.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ag71xx_platform.h>
+
+#define AG71XX_DRV_NAME "ag71xx"
+#define AG71XX_DRV_VERSION "0.5.35"
+
+#define AG71XX_NAPI_WEIGHT 64
+#define AG71XX_OOM_REFILL (1 + HZ/10)
+
+#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
+#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
+#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
+
+#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
+#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
+
+#define AG71XX_TX_MTU_LEN 1540
+#define AG71XX_RX_PKT_RESERVE 64
+#define AG71XX_RX_PKT_SIZE \
+ (AG71XX_RX_PKT_RESERVE + ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
+
+#define AG71XX_TX_RING_SIZE_DEFAULT 64
+#define AG71XX_RX_RING_SIZE_DEFAULT 128
+
+#define AG71XX_TX_RING_SIZE_MAX 256
+#define AG71XX_RX_RING_SIZE_MAX 256
+
+#ifdef CONFIG_AG71XX_DEBUG
+#define DBG(fmt, args...) pr_debug(fmt, ## args)
+#else
+#define DBG(fmt, args...) do {} while (0)
+#endif
+
+#define ag71xx_assert(_cond) \
+do { \
+ if (_cond) \
+ break; \
+ printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
+ BUG(); \
+} while (0)
+
+struct ag71xx_desc {
+ u32 data;
+ u32 ctrl;
+#define DESC_EMPTY BIT(31)
+#define DESC_MORE BIT(24)
+#define DESC_PKTLEN_M 0xfff
+ u32 next;
+ u32 pad;
+} __attribute__((aligned(4)));
+
+struct ag71xx_buf {
+ struct sk_buff *skb;
+ struct ag71xx_desc *desc;
+ dma_addr_t dma_addr;
+ unsigned long timestamp;
+};
+
+struct ag71xx_ring {
+ struct ag71xx_buf *buf;
+ u8 *descs_cpu;
+ dma_addr_t descs_dma;
+ unsigned int desc_size;
+ unsigned int curr;
+ unsigned int dirty;
+ unsigned int size;
+};
+
+struct ag71xx_mdio {
+ struct mii_bus *mii_bus;
+ int mii_irq[PHY_MAX_ADDR];
+ void __iomem *mdio_base;
+ struct ag71xx_mdio_platform_data *pdata;
+};
+
+struct ag71xx_int_stats {
+ unsigned long rx_pr;
+ unsigned long rx_be;
+ unsigned long rx_of;
+ unsigned long tx_ps;
+ unsigned long tx_be;
+ unsigned long tx_ur;
+ unsigned long total;
+};
+
+struct ag71xx_napi_stats {
+ unsigned long napi_calls;
+ unsigned long rx_count;
+ unsigned long rx_packets;
+ unsigned long rx_packets_max;
+ unsigned long tx_count;
+ unsigned long tx_packets;
+ unsigned long tx_packets_max;
+
+ unsigned long rx[AG71XX_NAPI_WEIGHT + 1];
+ unsigned long tx[AG71XX_NAPI_WEIGHT + 1];
+};
+
+struct ag71xx_debug {
+ struct dentry *debugfs_dir;
+
+ struct ag71xx_int_stats int_stats;
+ struct ag71xx_napi_stats napi_stats;
+};
+
+struct ag71xx {
+ void __iomem *mac_base;
+
+ spinlock_t lock;
+ struct platform_device *pdev;
+ struct net_device *dev;
+ struct napi_struct napi;
+ u32 msg_enable;
+
+ struct ag71xx_desc *stop_desc;
+ dma_addr_t stop_desc_dma;
+
+ struct ag71xx_ring rx_ring;
+ struct ag71xx_ring tx_ring;
+
+ struct mii_bus *mii_bus;
+ struct phy_device *phy_dev;
+ void *phy_priv;
+
+ unsigned int link;
+ unsigned int speed;
+ int duplex;
+
+ struct work_struct restart_work;
+ struct delayed_work link_work;
+ struct timer_list oom_timer;
+
+#ifdef CONFIG_AG71XX_DEBUG_FS
+ struct ag71xx_debug debug;
+#endif
+};
+
+extern struct ethtool_ops ag71xx_ethtool_ops;
+void ag71xx_link_adjust(struct ag71xx *ag);
+
+int ag71xx_mdio_driver_init(void) __init;
+void ag71xx_mdio_driver_exit(void);
+
+int ag71xx_phy_connect(struct ag71xx *ag);
+void ag71xx_phy_disconnect(struct ag71xx *ag);
+void ag71xx_phy_start(struct ag71xx *ag);
+void ag71xx_phy_stop(struct ag71xx *ag);
+
+static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
+{
+ return ag->pdev->dev.platform_data;
+}
+
+static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
+{
+ return (desc->ctrl & DESC_EMPTY) != 0;
+}
+
+static inline int ag71xx_desc_pktlen(struct ag71xx_desc *desc)
+{
+ return desc->ctrl & DESC_PKTLEN_M;
+}
+
+/* Register offsets */
+#define AG71XX_REG_MAC_CFG1 0x0000
+#define AG71XX_REG_MAC_CFG2 0x0004
+#define AG71XX_REG_MAC_IPG 0x0008
+#define AG71XX_REG_MAC_HDX 0x000c
+#define AG71XX_REG_MAC_MFL 0x0010
+#define AG71XX_REG_MII_CFG 0x0020
+#define AG71XX_REG_MII_CMD 0x0024
+#define AG71XX_REG_MII_ADDR 0x0028
+#define AG71XX_REG_MII_CTRL 0x002c
+#define AG71XX_REG_MII_STATUS 0x0030
+#define AG71XX_REG_MII_IND 0x0034
+#define AG71XX_REG_MAC_IFCTL 0x0038
+#define AG71XX_REG_MAC_ADDR1 0x0040
+#define AG71XX_REG_MAC_ADDR2 0x0044
+#define AG71XX_REG_FIFO_CFG0 0x0048
+#define AG71XX_REG_FIFO_CFG1 0x004c
+#define AG71XX_REG_FIFO_CFG2 0x0050
+#define AG71XX_REG_FIFO_CFG3 0x0054
+#define AG71XX_REG_FIFO_CFG4 0x0058
+#define AG71XX_REG_FIFO_CFG5 0x005c
+#define AG71XX_REG_FIFO_RAM0 0x0060
+#define AG71XX_REG_FIFO_RAM1 0x0064
+#define AG71XX_REG_FIFO_RAM2 0x0068
+#define AG71XX_REG_FIFO_RAM3 0x006c
+#define AG71XX_REG_FIFO_RAM4 0x0070
+#define AG71XX_REG_FIFO_RAM5 0x0074
+#define AG71XX_REG_FIFO_RAM6 0x0078
+#define AG71XX_REG_FIFO_RAM7 0x007c
+
+#define AG71XX_REG_TX_CTRL 0x0180
+#define AG71XX_REG_TX_DESC 0x0184
+#define AG71XX_REG_TX_STATUS 0x0188
+#define AG71XX_REG_RX_CTRL 0x018c
+#define AG71XX_REG_RX_DESC 0x0190
+#define AG71XX_REG_RX_STATUS 0x0194
+#define AG71XX_REG_INT_ENABLE 0x0198
+#define AG71XX_REG_INT_STATUS 0x019c
+
+#define AG71XX_REG_FIFO_DEPTH 0x01a8
+#define AG71XX_REG_RX_SM 0x01b0
+#define AG71XX_REG_TX_SM 0x01b4
+
+#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
+#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
+#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
+#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
+#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
+#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
+#define MAC_CFG1_LB BIT(8) /* Loopback mode */
+#define MAC_CFG1_SR BIT(31) /* Soft Reset */
+
+#define MAC_CFG2_FDX BIT(0)
+#define MAC_CFG2_CRC_EN BIT(1)
+#define MAC_CFG2_PAD_CRC_EN BIT(2)
+#define MAC_CFG2_LEN_CHECK BIT(4)
+#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
+#define MAC_CFG2_IF_1000 BIT(9)
+#define MAC_CFG2_IF_10_100 BIT(8)
+
+#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
+#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
+#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
+#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
+#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
+#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
+ | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
+
+#define FIFO_CFG0_ENABLE_SHIFT 8
+
+#define FIFO_CFG4_DE BIT(0) /* Drop Event */
+#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
+#define FIFO_CFG4_FC BIT(2) /* False Carrier */
+#define FIFO_CFG4_CE BIT(3) /* Code Error */
+#define FIFO_CFG4_CR BIT(4) /* CRC error */
+#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
+#define FIFO_CFG4_LO BIT(6) /* Length out of range */
+#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
+#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
+#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
+#define FIFO_CFG4_DR BIT(10) /* Dribble */
+#define FIFO_CFG4_LE BIT(11) /* Long Event */
+#define FIFO_CFG4_CF BIT(12) /* Control Frame */
+#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
+#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
+#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
+#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
+#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
+
+#define FIFO_CFG5_DE BIT(0) /* Drop Event */
+#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
+#define FIFO_CFG5_FC BIT(2) /* False Carrier */
+#define FIFO_CFG5_CE BIT(3) /* Code Error */
+#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
+#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
+#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
+#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
+#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
+#define FIFO_CFG5_DR BIT(9) /* Dribble */
+#define FIFO_CFG5_CF BIT(10) /* Control Frame */
+#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
+#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
+#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
+#define FIFO_CFG5_LE BIT(14) /* Long Event */
+#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
+#define FIFO_CFG5_16 BIT(16) /* unknown */
+#define FIFO_CFG5_17 BIT(17) /* unknown */
+#define FIFO_CFG5_SF BIT(18) /* Short Frame */
+#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
+
+#define AG71XX_INT_TX_PS BIT(0)
+#define AG71XX_INT_TX_UR BIT(1)
+#define AG71XX_INT_TX_BE BIT(3)
+#define AG71XX_INT_RX_PR BIT(4)
+#define AG71XX_INT_RX_OF BIT(6)
+#define AG71XX_INT_RX_BE BIT(7)
+
+#define MAC_IFCTL_SPEED BIT(16)
+
+#define MII_CFG_CLK_DIV_4 0
+#define MII_CFG_CLK_DIV_6 2
+#define MII_CFG_CLK_DIV_8 3
+#define MII_CFG_CLK_DIV_10 4
+#define MII_CFG_CLK_DIV_14 5
+#define MII_CFG_CLK_DIV_20 6
+#define MII_CFG_CLK_DIV_28 7
+#define MII_CFG_RESET BIT(31)
+
+#define MII_CMD_WRITE 0x0
+#define MII_CMD_READ 0x1
+#define MII_ADDR_SHIFT 8
+#define MII_IND_BUSY BIT(0)
+#define MII_IND_INVALID BIT(2)
+
+#define TX_CTRL_TXE BIT(0) /* Tx Enable */
+
+#define TX_STATUS_PS BIT(0) /* Packet Sent */
+#define TX_STATUS_UR BIT(1) /* Tx Underrun */
+#define TX_STATUS_BE BIT(3) /* Bus Error */
+
+#define RX_CTRL_RXE BIT(0) /* Rx Enable */
+
+#define RX_STATUS_PR BIT(0) /* Packet Received */
+#define RX_STATUS_OF BIT(2) /* Rx Overflow */
+#define RX_STATUS_BE BIT(3) /* Bus Error */
+
+static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
+{
+ switch (reg) {
+ case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
+ case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
+ case AG71XX_REG_MII_CFG:
+ break;
+
+ default:
+ BUG();
+ }
+}
+
+static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
+{
+ ag71xx_check_reg_offset(ag, reg);
+
+ __raw_writel(value, ag->mac_base + reg);
+ /* flush write */
+ (void) __raw_readl(ag->mac_base + reg);
+}
+
+static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
+{
+ ag71xx_check_reg_offset(ag, reg);
+
+ return __raw_readl(ag->mac_base + reg);
+}
+
+static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
+{
+ void __iomem *r;
+
+ ag71xx_check_reg_offset(ag, reg);
+
+ r = ag->mac_base + reg;
+ __raw_writel(__raw_readl(r) | mask, r);
+ /* flush write */
+ (void)__raw_readl(r);
+}
+
+static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
+{
+ void __iomem *r;
+
+ ag71xx_check_reg_offset(ag, reg);
+
+ r = ag->mac_base + reg;
+ __raw_writel(__raw_readl(r) & ~mask, r);
+ /* flush write */
+ (void) __raw_readl(r);
+}
+
+static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
+{
+ ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
+}
+
+static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
+{
+ ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
+}
+
+#ifdef CONFIG_AG71XX_AR8216_SUPPORT
+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
+ int pktlen);
+static inline int ag71xx_has_ar8216(struct ag71xx *ag)
+{
+ return ag71xx_get_pdata(ag)->has_ar8216;
+}
+#else
+static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
+ struct sk_buff *skb)
+{
+}
+
+static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
+ struct sk_buff *skb,
+ int pktlen)
+{
+ return 0;
+}
+static inline int ag71xx_has_ar8216(struct ag71xx *ag)
+{
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_AG71XX_DEBUG_FS
+int ag71xx_debugfs_root_init(void);
+void ag71xx_debugfs_root_exit(void);
+int ag71xx_debugfs_init(struct ag71xx *ag);
+void ag71xx_debugfs_exit(struct ag71xx *ag);
+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
+#else
+static inline int ag71xx_debugfs_root_init(void) { return 0; }
+static inline void ag71xx_debugfs_root_exit(void) {}
+static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
+static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
+static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
+ u32 status) {}
+static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
+ int rx, int tx) {}
+#endif /* CONFIG_AG71XX_DEBUG_FS */
+
+void ag71xx_ar7240_start(struct ag71xx *ag);
+void ag71xx_ar7240_stop(struct ag71xx *ag);
+int ag71xx_ar7240_init(struct ag71xx *ag);
+void ag71xx_ar7240_cleanup(struct ag71xx *ag);
+
+int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg);
+void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val);
+
+u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr);
+int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr, u16 reg_val);
+
+#endif /* _AG71XX_H */
--- /dev/null
+/*
+ * Driver for the built-in ethernet switch of the Atheros AR7240 SoC
+ * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2010 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/mii.h>
+#include <linux/bitops.h>
+#include <linux/switch.h>
+#include "ag71xx.h"
+
+#define BITM(_count) (BIT(_count) - 1)
+#define BITS(_shift, _count) (BITM(_count) << _shift)
+
+#define AR7240_REG_MASK_CTRL 0x00
+#define AR7240_MASK_CTRL_REVISION_M BITM(8)
+#define AR7240_MASK_CTRL_VERSION_M BITM(8)
+#define AR7240_MASK_CTRL_VERSION_S 8
+#define AR7240_MASK_CTRL_VERSION_AR7240 0x01
+#define AR7240_MASK_CTRL_VERSION_AR934X 0x02
+#define AR7240_MASK_CTRL_SOFT_RESET BIT(31)
+
+#define AR7240_REG_MAC_ADDR0 0x20
+#define AR7240_REG_MAC_ADDR1 0x24
+
+#define AR7240_REG_FLOOD_MASK 0x2c
+#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26)
+
+#define AR7240_REG_GLOBAL_CTRL 0x30
+#define AR7240_GLOBAL_CTRL_MTU_M BITM(12)
+
+#define AR7240_REG_VTU 0x0040
+#define AR7240_VTU_OP BITM(3)
+#define AR7240_VTU_OP_NOOP 0x0
+#define AR7240_VTU_OP_FLUSH 0x1
+#define AR7240_VTU_OP_LOAD 0x2
+#define AR7240_VTU_OP_PURGE 0x3
+#define AR7240_VTU_OP_REMOVE_PORT 0x4
+#define AR7240_VTU_ACTIVE BIT(3)
+#define AR7240_VTU_FULL BIT(4)
+#define AR7240_VTU_PORT BITS(8, 4)
+#define AR7240_VTU_PORT_S 8
+#define AR7240_VTU_VID BITS(16, 12)
+#define AR7240_VTU_VID_S 16
+#define AR7240_VTU_PRIO BITS(28, 3)
+#define AR7240_VTU_PRIO_S 28
+#define AR7240_VTU_PRIO_EN BIT(31)
+
+#define AR7240_REG_VTU_DATA 0x0044
+#define AR7240_VTUDATA_MEMBER BITS(0, 10)
+#define AR7240_VTUDATA_VALID BIT(11)
+
+#define AR7240_REG_ATU 0x50
+#define AR7240_ATU_FLUSH_ALL 0x1
+
+#define AR7240_REG_AT_CTRL 0x5c
+#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15)
+#define AR7240_AT_CTRL_AGE_EN BIT(17)
+#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18)
+#define AR7240_AT_CTRL_RESERVED BIT(19)
+#define AR7240_AT_CTRL_ARP_EN BIT(20)
+
+#define AR7240_REG_TAG_PRIORITY 0x70
+
+#define AR7240_REG_SERVICE_TAG 0x74
+#define AR7240_SERVICE_TAG_M BITM(16)
+
+#define AR7240_REG_CPU_PORT 0x78
+#define AR7240_MIRROR_PORT_S 4
+#define AR7240_CPU_PORT_EN BIT(8)
+
+#define AR7240_REG_MIB_FUNCTION0 0x80
+#define AR7240_MIB_TIMER_M BITM(16)
+#define AR7240_MIB_AT_HALF_EN BIT(16)
+#define AR7240_MIB_BUSY BIT(17)
+#define AR7240_MIB_FUNC_S 24
+#define AR7240_MIB_FUNC_NO_OP 0x0
+#define AR7240_MIB_FUNC_FLUSH 0x1
+#define AR7240_MIB_FUNC_CAPTURE 0x3
+
+#define AR7240_REG_MDIO_CTRL 0x98
+#define AR7240_MDIO_CTRL_DATA_M BITM(16)
+#define AR7240_MDIO_CTRL_REG_ADDR_S 16
+#define AR7240_MDIO_CTRL_PHY_ADDR_S 21
+#define AR7240_MDIO_CTRL_CMD_WRITE 0
+#define AR7240_MDIO_CTRL_CMD_READ BIT(27)
+#define AR7240_MDIO_CTRL_MASTER_EN BIT(30)
+#define AR7240_MDIO_CTRL_BUSY BIT(31)
+
+#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
+
+#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00)
+#define AR7240_PORT_STATUS_SPEED_S 0
+#define AR7240_PORT_STATUS_SPEED_M BITM(2)
+#define AR7240_PORT_STATUS_SPEED_10 0
+#define AR7240_PORT_STATUS_SPEED_100 1
+#define AR7240_PORT_STATUS_SPEED_1000 2
+#define AR7240_PORT_STATUS_TXMAC BIT(2)
+#define AR7240_PORT_STATUS_RXMAC BIT(3)
+#define AR7240_PORT_STATUS_TXFLOW BIT(4)
+#define AR7240_PORT_STATUS_RXFLOW BIT(5)
+#define AR7240_PORT_STATUS_DUPLEX BIT(6)
+#define AR7240_PORT_STATUS_LINK_UP BIT(8)
+#define AR7240_PORT_STATUS_LINK_AUTO BIT(9)
+#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10)
+
+#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04)
+#define AR7240_PORT_CTRL_STATE_M BITM(3)
+#define AR7240_PORT_CTRL_STATE_DISABLED 0
+#define AR7240_PORT_CTRL_STATE_BLOCK 1
+#define AR7240_PORT_CTRL_STATE_LISTEN 2
+#define AR7240_PORT_CTRL_STATE_LEARN 3
+#define AR7240_PORT_CTRL_STATE_FORWARD 4
+#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7)
+#define AR7240_PORT_CTRL_VLAN_MODE_S 8
+#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0
+#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
+#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2
+#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
+#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10)
+#define AR7240_PORT_CTRL_HEADER BIT(11)
+#define AR7240_PORT_CTRL_MAC_LOOP BIT(12)
+#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13)
+#define AR7240_PORT_CTRL_LEARN BIT(14)
+#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15)
+#define AR7240_PORT_CTRL_MIRROR_TX BIT(16)
+#define AR7240_PORT_CTRL_MIRROR_RX BIT(17)
+
+#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08)
+
+#define AR7240_PORT_VLAN_DEFAULT_ID_S 0
+#define AR7240_PORT_VLAN_DEST_PORTS_S 16
+#define AR7240_PORT_VLAN_MODE_S 30
+#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0
+#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1
+#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2
+#define AR7240_PORT_VLAN_MODE_SECURE 3
+
+
+#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100)
+
+#define AR7240_STATS_RXBROAD 0x00
+#define AR7240_STATS_RXPAUSE 0x04
+#define AR7240_STATS_RXMULTI 0x08
+#define AR7240_STATS_RXFCSERR 0x0c
+#define AR7240_STATS_RXALIGNERR 0x10
+#define AR7240_STATS_RXRUNT 0x14
+#define AR7240_STATS_RXFRAGMENT 0x18
+#define AR7240_STATS_RX64BYTE 0x1c
+#define AR7240_STATS_RX128BYTE 0x20
+#define AR7240_STATS_RX256BYTE 0x24
+#define AR7240_STATS_RX512BYTE 0x28
+#define AR7240_STATS_RX1024BYTE 0x2c
+#define AR7240_STATS_RX1518BYTE 0x30
+#define AR7240_STATS_RXMAXBYTE 0x34
+#define AR7240_STATS_RXTOOLONG 0x38
+#define AR7240_STATS_RXGOODBYTE 0x3c
+#define AR7240_STATS_RXBADBYTE 0x44
+#define AR7240_STATS_RXOVERFLOW 0x4c
+#define AR7240_STATS_FILTERED 0x50
+#define AR7240_STATS_TXBROAD 0x54
+#define AR7240_STATS_TXPAUSE 0x58
+#define AR7240_STATS_TXMULTI 0x5c
+#define AR7240_STATS_TXUNDERRUN 0x60
+#define AR7240_STATS_TX64BYTE 0x64
+#define AR7240_STATS_TX128BYTE 0x68
+#define AR7240_STATS_TX256BYTE 0x6c
+#define AR7240_STATS_TX512BYTE 0x70
+#define AR7240_STATS_TX1024BYTE 0x74
+#define AR7240_STATS_TX1518BYTE 0x78
+#define AR7240_STATS_TXMAXBYTE 0x7c
+#define AR7240_STATS_TXOVERSIZE 0x80
+#define AR7240_STATS_TXBYTE 0x84
+#define AR7240_STATS_TXCOLLISION 0x8c
+#define AR7240_STATS_TXABORTCOL 0x90
+#define AR7240_STATS_TXMULTICOL 0x94
+#define AR7240_STATS_TXSINGLECOL 0x98
+#define AR7240_STATS_TXEXCDEFER 0x9c
+#define AR7240_STATS_TXDEFER 0xa0
+#define AR7240_STATS_TXLATECOL 0xa4
+
+#define AR7240_PORT_CPU 0
+#define AR7240_NUM_PORTS 6
+#define AR7240_NUM_PHYS 5
+
+#define AR7240_PHY_ID1 0x004d
+#define AR7240_PHY_ID2 0xd041
+
+#define AR934X_PHY_ID1 0x004d
+#define AR934X_PHY_ID2 0xd042
+
+#define AR7240_MAX_VLANS 16
+
+#define AR934X_REG_OPER_MODE0 0x04
+#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6)
+#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10)
+
+#define AR934X_REG_OPER_MODE1 0x08
+#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28)
+
+#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
+
+#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08)
+#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0
+#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12)
+#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13)
+#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14)
+#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15)
+#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16
+#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28)
+#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29
+
+#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c)
+#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16
+#define AR934X_PORT_VLAN2_8021Q_MODE_S 30
+#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0
+#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1
+#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2
+#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3
+
+#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
+
+struct ar7240sw_port_stat {
+ unsigned long rx_broadcast;
+ unsigned long rx_pause;
+ unsigned long rx_multicast;
+ unsigned long rx_fcs_error;
+ unsigned long rx_align_error;
+ unsigned long rx_runt;
+ unsigned long rx_fragments;
+ unsigned long rx_64byte;
+ unsigned long rx_128byte;
+ unsigned long rx_256byte;
+ unsigned long rx_512byte;
+ unsigned long rx_1024byte;
+ unsigned long rx_1518byte;
+ unsigned long rx_maxbyte;
+ unsigned long rx_toolong;
+ unsigned long rx_good_byte;
+ unsigned long rx_bad_byte;
+ unsigned long rx_overflow;
+ unsigned long filtered;
+
+ unsigned long tx_broadcast;
+ unsigned long tx_pause;
+ unsigned long tx_multicast;
+ unsigned long tx_underrun;
+ unsigned long tx_64byte;
+ unsigned long tx_128byte;
+ unsigned long tx_256byte;
+ unsigned long tx_512byte;
+ unsigned long tx_1024byte;
+ unsigned long tx_1518byte;
+ unsigned long tx_maxbyte;
+ unsigned long tx_oversize;
+ unsigned long tx_byte;
+ unsigned long tx_collision;
+ unsigned long tx_abortcol;
+ unsigned long tx_multicol;
+ unsigned long tx_singlecol;
+ unsigned long tx_excdefer;
+ unsigned long tx_defer;
+ unsigned long tx_xlatecol;
+};
+
+struct ar7240sw {
+ struct mii_bus *mii_bus;
+ struct ag71xx_switch_platform_data *swdata;
+ struct switch_dev swdev;
+ int num_ports;
+ u8 ver;
+ bool vlan;
+ u16 vlan_id[AR7240_MAX_VLANS];
+ u8 vlan_table[AR7240_MAX_VLANS];
+ u8 vlan_tagged;
+ u16 pvid[AR7240_NUM_PORTS];
+ char buf[80];
+
+ rwlock_t stats_lock;
+ struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
+};
+
+struct ar7240sw_hw_stat {
+ char string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int reg;
+};
+
+static DEFINE_MUTEX(reg_mutex);
+
+static inline int sw_is_ar7240(struct ar7240sw *as)
+{
+ return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
+}
+
+static inline int sw_is_ar934x(struct ar7240sw *as)
+{
+ return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
+}
+
+static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
+{
+ return BIT(port);
+}
+
+static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
+{
+ return BIT(as->swdev.ports) - 1;
+}
+
+static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
+{
+ return ar7240sw_port_mask_all(as) & ~BIT(port);
+}
+
+static inline u16 mk_phy_addr(u32 reg)
+{
+ return 0x17 & ((reg >> 4) | 0x10);
+}
+
+static inline u16 mk_phy_reg(u32 reg)
+{
+ return (reg << 1) & 0x1e;
+}
+
+static inline u16 mk_high_addr(u32 reg)
+{
+ return (reg >> 7) & 0x1ff;
+}
+
+static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
+{
+ unsigned long flags;
+ u16 phy_addr;
+ u16 phy_reg;
+ u32 hi, lo;
+
+ reg = (reg & 0xfffffffc) >> 2;
+ phy_addr = mk_phy_addr(reg);
+ phy_reg = mk_phy_reg(reg);
+
+ local_irq_save(flags);
+ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
+ lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg);
+ hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1);
+ local_irq_restore(flags);
+
+ return (hi << 16) | lo;
+}
+
+static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
+{
+ unsigned long flags;
+ u16 phy_addr;
+ u16 phy_reg;
+
+ reg = (reg & 0xfffffffc) >> 2;
+ phy_addr = mk_phy_addr(reg);
+ phy_reg = mk_phy_reg(reg);
+
+ local_irq_save(flags);
+ ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
+ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16));
+ ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff));
+ local_irq_restore(flags);
+}
+
+static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
+{
+ u32 ret;
+
+ mutex_lock(®_mutex);
+ ret = __ar7240sw_reg_read(mii, reg_addr);
+ mutex_unlock(®_mutex);
+
+ return ret;
+}
+
+static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
+{
+ mutex_lock(®_mutex);
+ __ar7240sw_reg_write(mii, reg_addr, reg_val);
+ mutex_unlock(®_mutex);
+}
+
+static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
+{
+ u32 t;
+
+ mutex_lock(®_mutex);
+ t = __ar7240sw_reg_read(mii, reg);
+ t &= ~mask;
+ t |= val;
+ __ar7240sw_reg_write(mii, reg, t);
+ mutex_unlock(®_mutex);
+
+ return t;
+}
+
+static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
+{
+ u32 t;
+
+ mutex_lock(®_mutex);
+ t = __ar7240sw_reg_read(mii, reg);
+ t |= val;
+ __ar7240sw_reg_write(mii, reg, t);
+ mutex_unlock(®_mutex);
+}
+
+static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
+ unsigned timeout)
+{
+ int i;
+
+ for (i = 0; i < timeout; i++) {
+ u32 t;
+
+ t = __ar7240sw_reg_read(mii, reg);
+ if ((t & mask) == val)
+ return 0;
+
+ msleep(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
+ unsigned timeout)
+{
+ int ret;
+
+ mutex_lock(®_mutex);
+ ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
+ mutex_unlock(®_mutex);
+ return ret;
+}
+
+u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr)
+{
+ u32 t, val = 0xffff;
+ int err;
+
+ if (phy_addr >= AR7240_NUM_PHYS)
+ return 0xffff;
+
+ mutex_lock(®_mutex);
+ t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
+ (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
+ AR7240_MDIO_CTRL_MASTER_EN |
+ AR7240_MDIO_CTRL_BUSY |
+ AR7240_MDIO_CTRL_CMD_READ;
+
+ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
+ err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
+ AR7240_MDIO_CTRL_BUSY, 0, 5);
+ if (!err)
+ val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
+ mutex_unlock(®_mutex);
+
+ return val & AR7240_MDIO_CTRL_DATA_M;
+}
+
+int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
+ unsigned reg_addr, u16 reg_val)
+{
+ u32 t;
+ int ret;
+
+ if (phy_addr >= AR7240_NUM_PHYS)
+ return -EINVAL;
+
+ mutex_lock(®_mutex);
+ t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
+ (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
+ AR7240_MDIO_CTRL_MASTER_EN |
+ AR7240_MDIO_CTRL_BUSY |
+ AR7240_MDIO_CTRL_CMD_WRITE |
+ reg_val;
+
+ __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
+ ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
+ AR7240_MDIO_CTRL_BUSY, 0, 5);
+ mutex_unlock(®_mutex);
+
+ return ret;
+}
+
+static int ar7240sw_capture_stats(struct ar7240sw *as)
+{
+ struct mii_bus *mii = as->mii_bus;
+ int port;
+ int ret;
+
+ write_lock(&as->stats_lock);
+
+ /* Capture the hardware statistics for all ports */
+ ar7240sw_reg_write(mii, AR7240_REG_MIB_FUNCTION0,
+ (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
+
+ /* Wait for the capturing to complete. */
+ ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
+ AR7240_MIB_BUSY, 0, 10);
+
+ if (ret)
+ goto unlock;
+
+ for (port = 0; port < AR7240_NUM_PORTS; port++) {
+ unsigned int base;
+ struct ar7240sw_port_stat *stats;
+
+ base = AR7240_REG_STATS_BASE(port);
+ stats = &as->port_stats[port];
+
+#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
+
+ stats->rx_good_byte += READ_STAT(RXGOODBYTE);
+ stats->tx_byte += READ_STAT(TXBYTE);
+
+#undef READ_STAT
+ }
+
+ ret = 0;
+
+unlock:
+ write_unlock(&as->stats_lock);
+ return ret;
+}
+
+static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
+{
+ ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
+ AR7240_PORT_CTRL_STATE_DISABLED);
+}
+
+static void ar7240sw_setup(struct ar7240sw *as)
+{
+ struct mii_bus *mii = as->mii_bus;
+
+ /* Enable CPU port, and disable mirror port */
+ ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
+ AR7240_CPU_PORT_EN |
+ (15 << AR7240_MIRROR_PORT_S));
+
+ /* Setup TAG priority mapping */
+ ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
+
+ /* Enable ARP frame acknowledge, aging, MAC replacing */
+ ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
+ AR7240_AT_CTRL_RESERVED |
+ 0x2b /* 5 min age time */ |
+ AR7240_AT_CTRL_AGE_EN |
+ AR7240_AT_CTRL_ARP_EN |
+ AR7240_AT_CTRL_LEARN_CHANGE);
+
+ /* Enable Broadcast frames transmitted to the CPU */
+ ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
+ AR7240_FLOOD_MASK_BROAD_TO_CPU);
+
+ /* setup MTU */
+ ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL, AR7240_GLOBAL_CTRL_MTU_M,
+ 1536);
+
+ /* setup Service TAG */
+ ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
+}
+
+static int ar7240sw_reset(struct ar7240sw *as)
+{
+ struct mii_bus *mii = as->mii_bus;
+ int ret;
+ int i;
+
+ /* Set all ports to disabled state. */
+ for (i = 0; i < AR7240_NUM_PORTS; i++)
+ ar7240sw_disable_port(as, i);
+
+ /* Wait for transmit queues to drain. */
+ msleep(2);
+
+ /* Reset the switch. */
+ ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
+ AR7240_MASK_CTRL_SOFT_RESET);
+
+ ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
+ AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
+
+ ar7240sw_setup(as);
+ return ret;
+}
+
+static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
+{
+ struct mii_bus *mii = as->mii_bus;
+ u32 ctrl;
+ u32 vid, mode;
+
+ ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
+ AR7240_PORT_CTRL_SINGLE_VLAN;
+
+ if (port == AR7240_PORT_CPU) {
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
+ AR7240_PORT_STATUS_SPEED_1000 |
+ AR7240_PORT_STATUS_TXFLOW |
+ AR7240_PORT_STATUS_RXFLOW |
+ AR7240_PORT_STATUS_TXMAC |
+ AR7240_PORT_STATUS_RXMAC |
+ AR7240_PORT_STATUS_DUPLEX);
+ } else {
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
+ AR7240_PORT_STATUS_LINK_AUTO);
+ }
+
+ /* Set the default VID for this port */
+ if (as->vlan) {
+ vid = as->vlan_id[as->pvid[port]];
+ mode = AR7240_PORT_VLAN_MODE_SECURE;
+ } else {
+ vid = port;
+ mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
+ }
+
+ if (as->vlan && (as->vlan_tagged & BIT(port))) {
+ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
+ AR7240_PORT_CTRL_VLAN_MODE_S;
+ } else {
+ ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
+ AR7240_PORT_CTRL_VLAN_MODE_S;
+ }
+
+ if (!portmask) {
+ if (port == AR7240_PORT_CPU)
+ portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
+ else
+ portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
+ }
+
+ /* allow the port to talk to all other ports, but exclude its
+ * own ID to prevent frames from being reflected back to the
+ * port that they came from */
+ portmask &= ar7240sw_port_mask_but(as, port);
+
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
+ if (sw_is_ar934x(as)) {
+ u32 vlan1, vlan2;
+
+ vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
+ vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
+ (mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
+ ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
+ ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
+ } else {
+ u32 vlan;
+
+ vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
+ (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
+
+ ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
+ }
+}
+
+static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
+{
+ struct mii_bus *mii = as->mii_bus;
+ u32 t;
+
+ t = (addr[4] << 8) | addr[5];
+ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
+
+ t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
+ ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
+
+ return 0;
+}
+
+static int
+ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ as->vlan_id[val->port_vlan] = val->value.i;
+ return 0;
+}
+
+static int
+ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ val->value.i = as->vlan_id[val->port_vlan];
+ return 0;
+}
+
+static int
+ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+
+ /* make sure no invalid PVIDs get set */
+
+ if (vlan >= dev->vlans)
+ return -EINVAL;
+
+ as->pvid[port] = vlan;
+ return 0;
+}
+
+static int
+ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ *vlan = as->pvid[port];
+ return 0;
+}
+
+static int
+ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u8 ports = as->vlan_table[val->port_vlan];
+ int i;
+
+ val->len = 0;
+ for (i = 0; i < as->swdev.ports; i++) {
+ struct switch_port *p;
+
+ if (!(ports & (1 << i)))
+ continue;
+
+ p = &val->value.ports[val->len++];
+ p->id = i;
+ if (as->vlan_tagged & (1 << i))
+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
+ else
+ p->flags = 0;
+ }
+ return 0;
+}
+
+static int
+ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u8 *vt = &as->vlan_table[val->port_vlan];
+ int i, j;
+
+ *vt = 0;
+ for (i = 0; i < val->len; i++) {
+ struct switch_port *p = &val->value.ports[i];
+
+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+ as->vlan_tagged |= (1 << p->id);
+ else {
+ as->vlan_tagged &= ~(1 << p->id);
+ as->pvid[p->id] = val->port_vlan;
+
+ /* make sure that an untagged port does not
+ * appear in other vlans */
+ for (j = 0; j < AR7240_MAX_VLANS; j++) {
+ if (j == val->port_vlan)
+ continue;
+ as->vlan_table[j] &= ~(1 << p->id);
+ }
+ }
+
+ *vt |= 1 << p->id;
+ }
+ return 0;
+}
+
+static int
+ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ as->vlan = !!val->value.i;
+ return 0;
+}
+
+static int
+ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ val->value.i = as->vlan;
+ return 0;
+}
+
+static const char *
+ar7240_speed_str(u32 status)
+{
+ u32 speed;
+
+ speed = (status >> AR7240_PORT_STATUS_SPEED_S) &
+ AR7240_PORT_STATUS_SPEED_M;
+ switch (speed) {
+ case AR7240_PORT_STATUS_SPEED_10:
+ return "10baseT";
+ case AR7240_PORT_STATUS_SPEED_100:
+ return "100baseT";
+ case AR7240_PORT_STATUS_SPEED_1000:
+ return "1000baseT";
+ }
+
+ return "unknown";
+}
+
+static int
+ar7240_port_get_link(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ struct mii_bus *mii = as->mii_bus;
+ u32 len;
+ u32 status;
+ int port;
+
+ port = val->port_vlan;
+
+ memset(as->buf, '\0', sizeof(as->buf));
+ status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
+
+ if (status & AR7240_PORT_STATUS_LINK_UP) {
+ len = snprintf(as->buf, sizeof(as->buf),
+ "port:%d link:up speed:%s %s-duplex %s%s%s",
+ port,
+ ar7240_speed_str(status),
+ (status & AR7240_PORT_STATUS_DUPLEX) ?
+ "full" : "half",
+ (status & AR7240_PORT_STATUS_TXFLOW) ?
+ "txflow ": "",
+ (status & AR7240_PORT_STATUS_RXFLOW) ?
+ "rxflow " : "",
+ (status & AR7240_PORT_STATUS_LINK_AUTO) ?
+ "auto ": "");
+ } else {
+ len = snprintf(as->buf, sizeof(as->buf),
+ "port:%d link:down", port);
+ }
+
+ val->value.s = as->buf;
+ val->len = len;
+
+ return 0;
+}
+
+static void
+ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
+{
+ struct mii_bus *mii = as->mii_bus;
+
+ if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
+ return;
+
+ if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
+ val &= AR7240_VTUDATA_MEMBER;
+ val |= AR7240_VTUDATA_VALID;
+ ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
+ }
+ op |= AR7240_VTU_ACTIVE;
+ ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
+}
+
+static int
+ar7240_hw_apply(struct switch_dev *dev)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ u8 portmask[AR7240_NUM_PORTS];
+ int i, j;
+
+ /* flush all vlan translation unit entries */
+ ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
+
+ memset(portmask, 0, sizeof(portmask));
+ if (as->vlan) {
+ /* calculate the port destination masks and load vlans
+ * into the vlan translation unit */
+ for (j = 0; j < AR7240_MAX_VLANS; j++) {
+ u8 vp = as->vlan_table[j];
+
+ if (!vp)
+ continue;
+
+ for (i = 0; i < as->swdev.ports; i++) {
+ u8 mask = (1 << i);
+ if (vp & mask)
+ portmask[i] |= vp & ~mask;
+ }
+
+ ar7240_vtu_op(as,
+ AR7240_VTU_OP_LOAD |
+ (as->vlan_id[j] << AR7240_VTU_VID_S),
+ as->vlan_table[j]);
+ }
+ } else {
+ /* vlan disabled:
+ * isolate all ports, but connect them to the cpu port */
+ for (i = 0; i < as->swdev.ports; i++) {
+ if (i == AR7240_PORT_CPU)
+ continue;
+
+ portmask[i] = 1 << AR7240_PORT_CPU;
+ portmask[AR7240_PORT_CPU] |= (1 << i);
+ }
+ }
+
+ /* update the port destination mask registers and tag settings */
+ for (i = 0; i < as->swdev.ports; i++)
+ ar7240sw_setup_port(as, i, portmask[i]);
+
+ return 0;
+}
+
+static int
+ar7240_reset_switch(struct switch_dev *dev)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ ar7240sw_reset(as);
+ return 0;
+}
+
+static int
+ar7240_get_port_link(struct switch_dev *dev, int port,
+ struct switch_port_link *link)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+ struct mii_bus *mii = as->mii_bus;
+ u32 status;
+
+ if (port > AR7240_NUM_PORTS)
+ return -EINVAL;
+
+ status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
+
+ link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
+ link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
+ link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
+ link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
+ link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
+ switch (status & AR7240_PORT_STATUS_SPEED_M) {
+ case AR7240_PORT_STATUS_SPEED_10:
+ link->speed = SWITCH_PORT_SPEED_10;
+ break;
+ case AR7240_PORT_STATUS_SPEED_100:
+ link->speed = SWITCH_PORT_SPEED_100;
+ break;
+ case AR7240_PORT_STATUS_SPEED_1000:
+ link->speed = SWITCH_PORT_SPEED_1000;
+ break;
+ }
+
+ return 0;
+}
+
+static int
+ar7240_get_port_stats(struct switch_dev *dev, int port,
+ struct switch_port_stats *stats)
+{
+ struct ar7240sw *as = sw_to_ar7240(dev);
+
+ if (port > AR7240_NUM_PORTS)
+ return -EINVAL;
+
+ ar7240sw_capture_stats(as);
+
+ read_lock(&as->stats_lock);
+ stats->rx_bytes = as->port_stats[port].rx_good_byte;
+ stats->tx_bytes = as->port_stats[port].tx_byte;
+ read_unlock(&as->stats_lock);
+
+ return 0;
+}
+
+static struct switch_attr ar7240_globals[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "enable_vlan",
+ .description = "Enable VLAN mode",
+ .set = ar7240_set_vlan,
+ .get = ar7240_get_vlan,
+ .max = 1
+ },
+};
+
+static struct switch_attr ar7240_port[] = {
+ {
+ .type = SWITCH_TYPE_STRING,
+ .name = "link",
+ .description = "Get port link information",
+ .max = 1,
+ .set = NULL,
+ .get = ar7240_port_get_link,
+ },
+};
+
+static struct switch_attr ar7240_vlan[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vid",
+ .description = "VLAN ID",
+ .set = ar7240_set_vid,
+ .get = ar7240_get_vid,
+ .max = 4094,
+ },
+};
+
+static const struct switch_dev_ops ar7240_ops = {
+ .attr_global = {
+ .attr = ar7240_globals,
+ .n_attr = ARRAY_SIZE(ar7240_globals),
+ },
+ .attr_port = {
+ .attr = ar7240_port,
+ .n_attr = ARRAY_SIZE(ar7240_port),
+ },
+ .attr_vlan = {
+ .attr = ar7240_vlan,
+ .n_attr = ARRAY_SIZE(ar7240_vlan),
+ },
+ .get_port_pvid = ar7240_get_pvid,
+ .set_port_pvid = ar7240_set_pvid,
+ .get_vlan_ports = ar7240_get_ports,
+ .set_vlan_ports = ar7240_set_ports,
+ .apply_config = ar7240_hw_apply,
+ .reset_switch = ar7240_reset_switch,
+ .get_port_link = ar7240_get_port_link,
+ .get_port_stats = ar7240_get_port_stats,
+};
+
+static struct ar7240sw *ar7240_probe(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct mii_bus *mii = ag->mii_bus;
+ struct ar7240sw *as;
+ struct switch_dev *swdev;
+ u32 ctrl;
+ u16 phy_id1;
+ u16 phy_id2;
+ int i;
+
+ phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
+ phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
+ if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
+ (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
+ pr_err("%s: unknown phy id '%04x:%04x'\n",
+ ag->dev->name, phy_id1, phy_id2);
+ return NULL;
+ }
+
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (!as)
+ return NULL;
+
+ as->mii_bus = mii;
+ as->swdata = pdata->switch_data;
+
+ swdev = &as->swdev;
+
+ ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
+ as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
+ AR7240_MASK_CTRL_VERSION_M;
+
+ if (sw_is_ar7240(as)) {
+ swdev->name = "AR7240/AR9330 built-in switch";
+ } else if (sw_is_ar934x(as)) {
+ swdev->name = "AR934X built-in switch";
+
+ if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
+ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
+ AR934X_OPER_MODE0_MAC_GMII_EN);
+ } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) {
+ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
+ AR934X_OPER_MODE0_PHY_MII_EN);
+ } else {
+ pr_err("%s: invalid PHY interface mode\n",
+ ag->dev->name);
+ goto err_free;
+ }
+
+ if (as->swdata->phy4_mii_en)
+ ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
+ AR934X_REG_OPER_MODE1_PHY4_MII_EN);
+ } else {
+ pr_err("%s: unsupported chip, ctrl=%08x\n",
+ ag->dev->name, ctrl);
+ goto err_free;
+ }
+
+ swdev->ports = AR7240_NUM_PORTS - 1;
+ swdev->cpu_port = AR7240_PORT_CPU;
+ swdev->vlans = AR7240_MAX_VLANS;
+ swdev->ops = &ar7240_ops;
+
+ if (register_switch(&as->swdev, ag->dev) < 0)
+ goto err_free;
+
+ pr_info("%s: Found an %s\n", ag->dev->name, swdev->name);
+
+ /* initialize defaults */
+ for (i = 0; i < AR7240_MAX_VLANS; i++)
+ as->vlan_id[i] = i;
+
+ as->vlan_table[0] = ar7240sw_port_mask_all(as);
+
+ return as;
+
+err_free:
+ kfree(as);
+ return NULL;
+}
+
+static void link_function(struct work_struct *work) {
+ struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work);
+ unsigned long flags;
+ int i;
+ int status = 0;
+
+ for (i = 0; i < 4; i++) {
+ int link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR);
+ if(link & BMSR_LSTATUS) {
+ status = 1;
+ break;
+ }
+ }
+
+ spin_lock_irqsave(&ag->lock, flags);
+ if(status != ag->link) {
+ ag->link = status;
+ ag71xx_link_adjust(ag);
+ }
+ spin_unlock_irqrestore(&ag->lock, flags);
+
+ schedule_delayed_work(&ag->link_work, HZ / 2);
+}
+
+void ag71xx_ar7240_start(struct ag71xx *ag)
+{
+ struct ar7240sw *as = ag->phy_priv;
+
+ ar7240sw_reset(as);
+
+ ag->speed = SPEED_1000;
+ ag->duplex = 1;
+
+ ar7240_set_addr(as, ag->dev->dev_addr);
+ ar7240_hw_apply(&as->swdev);
+
+ schedule_delayed_work(&ag->link_work, HZ / 10);
+}
+
+void ag71xx_ar7240_stop(struct ag71xx *ag)
+{
+ cancel_delayed_work_sync(&ag->link_work);
+}
+
+int __devinit ag71xx_ar7240_init(struct ag71xx *ag)
+{
+ struct ar7240sw *as;
+
+ as = ar7240_probe(ag);
+ if (!as)
+ return -ENODEV;
+
+ ag->phy_priv = as;
+ ar7240sw_reset(as);
+
+ rwlock_init(&as->stats_lock);
+ INIT_DELAYED_WORK(&ag->link_work, link_function);
+
+ return 0;
+}
+
+void ag71xx_ar7240_cleanup(struct ag71xx *ag)
+{
+ struct ar7240sw *as = ag->phy_priv;
+
+ if (!as)
+ return;
+
+ unregister_switch(&as->swdev);
+ kfree(as);
+ ag->phy_priv = NULL;
+}
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ * Special support for the Atheros ar8216 switch chip
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AR8216_PACKET_TYPE_MASK 0xf
+#define AR8216_PACKET_TYPE_NORMAL 0
+
+#define AR8216_HEADER_LEN 2
+
+void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
+{
+ skb_push(skb, AR8216_HEADER_LEN);
+ skb->data[0] = 0x10;
+ skb->data[1] = 0x80;
+}
+
+int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
+ int pktlen)
+{
+ u8 type;
+
+ type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
+ switch (type) {
+ case AR8216_PACKET_TYPE_NORMAL:
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ skb_pull(skb, AR8216_HEADER_LEN);
+ return 0;
+}
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/debugfs.h>
+
+#include "ag71xx.h"
+
+static struct dentry *ag71xx_debugfs_root;
+
+static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
+{
+ file->private_data = inode->i_private;
+ return 0;
+}
+
+void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
+{
+ if (status)
+ ag->debug.int_stats.total++;
+ if (status & AG71XX_INT_TX_PS)
+ ag->debug.int_stats.tx_ps++;
+ if (status & AG71XX_INT_TX_UR)
+ ag->debug.int_stats.tx_ur++;
+ if (status & AG71XX_INT_TX_BE)
+ ag->debug.int_stats.tx_be++;
+ if (status & AG71XX_INT_RX_PR)
+ ag->debug.int_stats.rx_pr++;
+ if (status & AG71XX_INT_RX_OF)
+ ag->debug.int_stats.rx_of++;
+ if (status & AG71XX_INT_RX_BE)
+ ag->debug.int_stats.rx_be++;
+}
+
+static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+#define PR_INT_STAT(_label, _field) \
+ len += snprintf(buf + len, sizeof(buf) - len, \
+ "%20s: %10lu\n", _label, ag->debug.int_stats._field);
+
+ struct ag71xx *ag = file->private_data;
+ char buf[256];
+ unsigned int len = 0;
+
+ PR_INT_STAT("TX Packet Sent", tx_ps);
+ PR_INT_STAT("TX Underrun", tx_ur);
+ PR_INT_STAT("TX Bus Error", tx_be);
+ PR_INT_STAT("RX Packet Received", rx_pr);
+ PR_INT_STAT("RX Overflow", rx_of);
+ PR_INT_STAT("RX Bus Error", rx_be);
+ len += snprintf(buf + len, sizeof(buf) - len, "\n");
+ PR_INT_STAT("Total", total);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+#undef PR_INT_STAT
+}
+
+static const struct file_operations ag71xx_fops_int_stats = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_int_stats,
+ .owner = THIS_MODULE
+};
+
+void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
+{
+ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
+
+ if (rx) {
+ stats->rx_count++;
+ stats->rx_packets += rx;
+ if (rx <= AG71XX_NAPI_WEIGHT)
+ stats->rx[rx]++;
+ if (rx > stats->rx_packets_max)
+ stats->rx_packets_max = rx;
+ }
+
+ if (tx) {
+ stats->tx_count++;
+ stats->tx_packets += tx;
+ if (tx <= AG71XX_NAPI_WEIGHT)
+ stats->tx[tx]++;
+ if (tx > stats->tx_packets_max)
+ stats->tx_packets_max = tx;
+ }
+}
+
+static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ag71xx *ag = file->private_data;
+ struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
+ char *buf;
+ unsigned int buflen;
+ unsigned int len = 0;
+ unsigned long rx_avg = 0;
+ unsigned long tx_avg = 0;
+ int ret;
+ int i;
+
+ buflen = 2048;
+ buf = kmalloc(buflen, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ if (stats->rx_count)
+ rx_avg = stats->rx_packets / stats->rx_count;
+
+ if (stats->tx_count)
+ tx_avg = stats->tx_packets / stats->tx_count;
+
+ len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n",
+ "len", "rx", "tx");
+
+ for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
+ len += snprintf(buf + len, buflen - len,
+ "%3d: %10lu %10lu\n",
+ i, stats->rx[i], stats->tx[i]);
+
+ len += snprintf(buf + len, buflen - len, "\n");
+
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "sum", stats->rx_count, stats->tx_count);
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "avg", rx_avg, tx_avg);
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "max", stats->rx_packets_max, stats->tx_packets_max);
+ len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
+ "pkt", stats->rx_packets, stats->tx_packets);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return ret;
+}
+
+static const struct file_operations ag71xx_fops_napi_stats = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_napi_stats,
+ .owner = THIS_MODULE
+};
+
+#define DESC_PRINT_LEN 64
+
+static ssize_t read_file_ring(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos,
+ struct ag71xx *ag,
+ struct ag71xx_ring *ring,
+ unsigned desc_reg)
+{
+ char *buf;
+ unsigned int buflen;
+ unsigned int len = 0;
+ unsigned long flags;
+ ssize_t ret;
+ int curr;
+ int dirty;
+ u32 desc_hw;
+ int i;
+
+ buflen = (ring->size * DESC_PRINT_LEN);
+ buf = kmalloc(buflen, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ len += snprintf(buf + len, buflen - len,
+ "Idx ... %-8s %-8s %-8s %-8s . %-10s\n",
+ "desc", "next", "data", "ctrl", "timestamp");
+
+ spin_lock_irqsave(&ag->lock, flags);
+
+ curr = (ring->curr % ring->size);
+ dirty = (ring->dirty % ring->size);
+ desc_hw = ag71xx_rr(ag, desc_reg);
+ for (i = 0; i < ring->size; i++) {
+ struct ag71xx_buf *ab = &ring->buf[i];
+ u32 desc_dma = ((u32) ring->descs_dma) + i * ring->desc_size;
+
+ len += snprintf(buf + len, buflen - len,
+ "%3d %c%c%c %08x %08x %08x %08x %c %10lu\n",
+ i,
+ (i == curr) ? 'C' : ' ',
+ (i == dirty) ? 'D' : ' ',
+ (desc_hw == desc_dma) ? 'H' : ' ',
+ desc_dma,
+ ab->desc->next,
+ ab->desc->data,
+ ab->desc->ctrl,
+ (ab->desc->ctrl & DESC_EMPTY) ? 'E' : '*',
+ ab->timestamp);
+ }
+
+ spin_unlock_irqrestore(&ag->lock, flags);
+
+ ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
+ kfree(buf);
+
+ return ret;
+}
+
+static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ag71xx *ag = file->private_data;
+
+ return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
+ AG71XX_REG_TX_DESC);
+}
+
+static const struct file_operations ag71xx_fops_tx_ring = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_tx_ring,
+ .owner = THIS_MODULE
+};
+
+static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ag71xx *ag = file->private_data;
+
+ return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
+ AG71XX_REG_RX_DESC);
+}
+
+static const struct file_operations ag71xx_fops_rx_ring = {
+ .open = ag71xx_debugfs_generic_open,
+ .read = read_file_rx_ring,
+ .owner = THIS_MODULE
+};
+
+void ag71xx_debugfs_exit(struct ag71xx *ag)
+{
+ debugfs_remove_recursive(ag->debug.debugfs_dir);
+}
+
+int ag71xx_debugfs_init(struct ag71xx *ag)
+{
+ ag->debug.debugfs_dir = debugfs_create_dir(ag->dev->name,
+ ag71xx_debugfs_root);
+ if (!ag->debug.debugfs_dir)
+ return -ENOMEM;
+
+ debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_int_stats);
+ debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_napi_stats);
+ debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_tx_ring);
+ debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
+ ag, &ag71xx_fops_rx_ring);
+
+ return 0;
+}
+
+int ag71xx_debugfs_root_init(void)
+{
+ if (ag71xx_debugfs_root)
+ return -EBUSY;
+
+ ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
+ if (!ag71xx_debugfs_root)
+ return -ENOENT;
+
+ return 0;
+}
+
+void ag71xx_debugfs_root_exit(void)
+{
+ debugfs_remove(ag71xx_debugfs_root);
+ ag71xx_debugfs_root = NULL;
+}
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+static int ag71xx_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct phy_device *phydev = ag->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static int ag71xx_ethtool_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct phy_device *phydev = ag->phy_dev;
+
+ if (!phydev)
+ return -ENODEV;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ strcpy(info->driver, ag->pdev->dev.driver->name);
+ strcpy(info->version, AG71XX_DRV_VERSION);
+ strcpy(info->bus_info, dev_name(&ag->pdev->dev));
+}
+
+static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ return ag->msg_enable;
+}
+
+static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ ag->msg_enable = msg_level;
+}
+
+static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *er)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
+ er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
+ er->rx_mini_max_pending = 0;
+ er->rx_jumbo_max_pending = 0;
+
+ er->tx_pending = ag->tx_ring.size;
+ er->rx_pending = ag->rx_ring.size;
+ er->rx_mini_pending = 0;
+ er->rx_jumbo_pending = 0;
+}
+
+static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *er)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ unsigned tx_size;
+ unsigned rx_size;
+ int err;
+
+ if (er->rx_mini_pending != 0||
+ er->rx_jumbo_pending != 0 ||
+ er->rx_pending == 0 ||
+ er->tx_pending == 0)
+ return -EINVAL;
+
+ tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
+ er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
+
+ rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
+ er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
+
+ if (netif_running(dev)) {
+ err = dev->netdev_ops->ndo_stop(dev);
+ if (err)
+ return err;
+ }
+
+ ag->tx_ring.size = tx_size;
+ ag->rx_ring.size = rx_size;
+
+ if (netif_running(dev))
+ err = dev->netdev_ops->ndo_open(dev);
+
+ return err;
+}
+
+struct ethtool_ops ag71xx_ethtool_ops = {
+ .set_settings = ag71xx_ethtool_set_settings,
+ .get_settings = ag71xx_ethtool_get_settings,
+ .get_drvinfo = ag71xx_ethtool_get_drvinfo,
+ .get_msglevel = ag71xx_ethtool_get_msglevel,
+ .set_msglevel = ag71xx_ethtool_set_msglevel,
+ .get_ringparam = ag71xx_ethtool_get_ringparam,
+ .set_ringparam = ag71xx_ethtool_set_ringparam,
+ .get_link = ethtool_op_get_link,
+};
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AG71XX_DEFAULT_MSG_ENABLE \
+ (NETIF_MSG_DRV \
+ | NETIF_MSG_PROBE \
+ | NETIF_MSG_LINK \
+ | NETIF_MSG_TIMER \
+ | NETIF_MSG_IFDOWN \
+ | NETIF_MSG_IFUP \
+ | NETIF_MSG_RX_ERR \
+ | NETIF_MSG_TX_ERR)
+
+static int ag71xx_msg_level = -1;
+
+module_param_named(msg_level, ag71xx_msg_level, int, 0);
+MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
+
+static void ag71xx_dump_dma_regs(struct ag71xx *ag)
+{
+ DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
+ ag71xx_rr(ag, AG71XX_REG_TX_DESC),
+ ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
+
+ DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
+ ag71xx_rr(ag, AG71XX_REG_RX_DESC),
+ ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
+}
+
+static void ag71xx_dump_regs(struct ag71xx *ag)
+{
+ DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
+ ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
+ ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
+ ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
+ DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
+ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
+ ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
+ DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+ DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
+}
+
+static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
+{
+ DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
+ ag->dev->name, label, intr,
+ (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
+ (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
+ (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
+ (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
+ (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
+ (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
+}
+
+static void ag71xx_ring_free(struct ag71xx_ring *ring)
+{
+ kfree(ring->buf);
+
+ if (ring->descs_cpu)
+ dma_free_coherent(NULL, ring->size * ring->desc_size,
+ ring->descs_cpu, ring->descs_dma);
+}
+
+static int ag71xx_ring_alloc(struct ag71xx_ring *ring)
+{
+ int err;
+ int i;
+
+ ring->desc_size = sizeof(struct ag71xx_desc);
+ if (ring->desc_size % cache_line_size()) {
+ DBG("ag71xx: ring %p, desc size %u rounded to %u\n",
+ ring, ring->desc_size,
+ roundup(ring->desc_size, cache_line_size()));
+ ring->desc_size = roundup(ring->desc_size, cache_line_size());
+ }
+
+ ring->descs_cpu = dma_alloc_coherent(NULL, ring->size * ring->desc_size,
+ &ring->descs_dma, GFP_ATOMIC);
+ if (!ring->descs_cpu) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+
+ ring->buf = kzalloc(ring->size * sizeof(*ring->buf), GFP_KERNEL);
+ if (!ring->buf) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < ring->size; i++) {
+ int idx = i * ring->desc_size;
+ ring->buf[i].desc = (struct ag71xx_desc *)&ring->descs_cpu[idx];
+ DBG("ag71xx: ring %p, desc %d at %p\n",
+ ring, i, ring->buf[i].desc);
+ }
+
+ return 0;
+
+err:
+ return err;
+}
+
+static void ag71xx_ring_tx_clean(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ struct net_device *dev = ag->dev;
+
+ while (ring->curr != ring->dirty) {
+ u32 i = ring->dirty % ring->size;
+
+ if (!ag71xx_desc_empty(ring->buf[i].desc)) {
+ ring->buf[i].desc->ctrl = 0;
+ dev->stats.tx_errors++;
+ }
+
+ if (ring->buf[i].skb)
+ dev_kfree_skb_any(ring->buf[i].skb);
+
+ ring->buf[i].skb = NULL;
+
+ ring->dirty++;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+}
+
+static void ag71xx_ring_tx_init(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ int i;
+
+ for (i = 0; i < ring->size; i++) {
+ ring->buf[i].desc->next = (u32) (ring->descs_dma +
+ ring->desc_size * ((i + 1) % ring->size));
+
+ ring->buf[i].desc->ctrl = DESC_EMPTY;
+ ring->buf[i].skb = NULL;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ ring->curr = 0;
+ ring->dirty = 0;
+}
+
+static void ag71xx_ring_rx_clean(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ int i;
+
+ if (!ring->buf)
+ return;
+
+ for (i = 0; i < ring->size; i++)
+ if (ring->buf[i].skb) {
+ dma_unmap_single(&ag->dev->dev, ring->buf[i].dma_addr,
+ AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE);
+ kfree_skb(ring->buf[i].skb);
+ }
+}
+
+static int ag71xx_rx_reserve(struct ag71xx *ag)
+{
+ int reserve = 0;
+
+ if (ag71xx_get_pdata(ag)->is_ar724x) {
+ if (!ag71xx_has_ar8216(ag))
+ reserve = 2;
+
+ if (ag->phy_dev)
+ reserve += 4 - (ag->phy_dev->pkt_align % 4);
+
+ reserve %= 4;
+ }
+
+ return reserve + AG71XX_RX_PKT_RESERVE;
+}
+
+
+static int ag71xx_ring_rx_init(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ unsigned int reserve = ag71xx_rx_reserve(ag);
+ unsigned int i;
+ int ret;
+
+ ret = 0;
+ for (i = 0; i < ring->size; i++) {
+ ring->buf[i].desc->next = (u32) (ring->descs_dma +
+ ring->desc_size * ((i + 1) % ring->size));
+
+ DBG("ag71xx: RX desc at %p, next is %08x\n",
+ ring->buf[i].desc,
+ ring->buf[i].desc->next);
+ }
+
+ for (i = 0; i < ring->size; i++) {
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+
+ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve);
+ if (!skb) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ skb->dev = ag->dev;
+ skb_reserve(skb, reserve);
+
+ dma_addr = dma_map_single(&ag->dev->dev, skb->data,
+ AG71XX_RX_PKT_SIZE,
+ DMA_FROM_DEVICE);
+ ring->buf[i].skb = skb;
+ ring->buf[i].dma_addr = dma_addr;
+ ring->buf[i].desc->data = (u32) dma_addr;
+ ring->buf[i].desc->ctrl = DESC_EMPTY;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ ring->curr = 0;
+ ring->dirty = 0;
+
+ return ret;
+}
+
+static int ag71xx_ring_rx_refill(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ unsigned int reserve = ag71xx_rx_reserve(ag);
+ unsigned int count;
+
+ count = 0;
+ for (; ring->curr - ring->dirty > 0; ring->dirty++) {
+ unsigned int i;
+
+ i = ring->dirty % ring->size;
+
+ if (ring->buf[i].skb == NULL) {
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(AG71XX_RX_PKT_SIZE + reserve);
+ if (skb == NULL)
+ break;
+
+ skb_reserve(skb, reserve);
+ skb->dev = ag->dev;
+
+ dma_addr = dma_map_single(&ag->dev->dev, skb->data,
+ AG71XX_RX_PKT_SIZE,
+ DMA_FROM_DEVICE);
+
+ ring->buf[i].skb = skb;
+ ring->buf[i].dma_addr = dma_addr;
+ ring->buf[i].desc->data = (u32) dma_addr;
+ }
+
+ ring->buf[i].desc->ctrl = DESC_EMPTY;
+ count++;
+ }
+
+ /* flush descriptors */
+ wmb();
+
+ DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
+
+ return count;
+}
+
+static int ag71xx_rings_init(struct ag71xx *ag)
+{
+ int ret;
+
+ ret = ag71xx_ring_alloc(&ag->tx_ring);
+ if (ret)
+ return ret;
+
+ ag71xx_ring_tx_init(ag);
+
+ ret = ag71xx_ring_alloc(&ag->rx_ring);
+ if (ret)
+ return ret;
+
+ ret = ag71xx_ring_rx_init(ag);
+ return ret;
+}
+
+static void ag71xx_rings_cleanup(struct ag71xx *ag)
+{
+ ag71xx_ring_rx_clean(ag);
+ ag71xx_ring_free(&ag->rx_ring);
+
+ ag71xx_ring_tx_clean(ag);
+ ag71xx_ring_free(&ag->tx_ring);
+}
+
+static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
+{
+ switch (ag->speed) {
+ case SPEED_1000:
+ return "1000";
+ case SPEED_100:
+ return "100";
+ case SPEED_10:
+ return "10";
+ }
+
+ return "?";
+}
+
+static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
+{
+ u32 t;
+
+ t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
+ | (((u32) mac[3]) << 8) | ((u32) mac[2]);
+
+ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
+
+ t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
+ ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
+}
+
+static void ag71xx_dma_reset(struct ag71xx *ag)
+{
+ u32 val;
+ int i;
+
+ ag71xx_dump_dma_regs(ag);
+
+ /* stop RX and TX */
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
+
+ /*
+ * give the hardware some time to really stop all rx/tx activity
+ * clearing the descriptors too early causes random memory corruption
+ */
+ mdelay(1);
+
+ /* clear descriptor addresses */
+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
+
+ /* clear pending RX/TX interrupts */
+ for (i = 0; i < 256; i++) {
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
+ }
+
+ /* clear pending errors */
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
+
+ val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
+ if (val)
+ pr_alert("%s: unable to clear DMA Rx status: %08x\n",
+ ag->dev->name, val);
+
+ val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
+
+ /* mask out reserved bits */
+ val &= ~0xff000000;
+
+ if (val)
+ pr_alert("%s: unable to clear DMA Tx status: %08x\n",
+ ag->dev->name, val);
+
+ ag71xx_dump_dma_regs(ag);
+}
+
+#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
+ MAC_CFG1_SRX | MAC_CFG1_STX)
+
+#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
+
+#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
+ FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
+ FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
+ FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
+ FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
+ FIFO_CFG4_VT)
+
+#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
+ FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
+ FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
+ FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
+ FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
+ FIFO_CFG5_17 | FIFO_CFG5_SF)
+
+static void ag71xx_hw_stop(struct ag71xx *ag)
+{
+ /* disable all interrupts and stop the rx/tx engine */
+ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
+}
+
+static void ag71xx_hw_setup(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ /* setup MAC configuration registers */
+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT);
+
+ ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
+ MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
+
+ /* setup max frame length */
+ ag71xx_wr(ag, AG71XX_REG_MAC_MFL, AG71XX_TX_MTU_LEN);
+
+ /* setup FIFO configuration registers */
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
+ if (pdata->is_ar724x) {
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, pdata->fifo_cfg1);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, pdata->fifo_cfg2);
+ } else {
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
+ }
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
+}
+
+static void ag71xx_hw_init(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ u32 reset_mask = pdata->reset_bit;
+
+ ag71xx_hw_stop(ag);
+
+ if (pdata->is_ar724x) {
+ u32 reset_phy = reset_mask;
+
+ reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY;
+ reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY);
+
+ ath79_device_reset_set(reset_phy);
+ mdelay(50);
+ ath79_device_reset_clear(reset_phy);
+ mdelay(200);
+ }
+
+ ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
+ udelay(20);
+
+ ath79_device_reset_set(reset_mask);
+ mdelay(100);
+ ath79_device_reset_clear(reset_mask);
+ mdelay(200);
+
+ ag71xx_hw_setup(ag);
+
+ ag71xx_dma_reset(ag);
+}
+
+static void ag71xx_fast_reset(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct net_device *dev = ag->dev;
+ u32 reset_mask = pdata->reset_bit;
+ u32 rx_ds, tx_ds;
+ u32 mii_reg;
+
+ reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC;
+
+ mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
+ rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
+ tx_ds = ag71xx_rr(ag, AG71XX_REG_TX_DESC);
+
+ ath79_device_reset_set(reset_mask);
+ udelay(10);
+ ath79_device_reset_clear(reset_mask);
+ udelay(10);
+
+ ag71xx_dma_reset(ag);
+ ag71xx_hw_setup(ag);
+
+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, tx_ds);
+ ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
+
+ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
+}
+
+static void ag71xx_hw_start(struct ag71xx *ag)
+{
+ /* start RX engine */
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+
+ /* enable interrupts */
+ ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
+}
+
+void ag71xx_link_adjust(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ u32 cfg2;
+ u32 ifctl;
+ u32 fifo5;
+
+ if (!ag->link) {
+ ag71xx_hw_stop(ag);
+ netif_carrier_off(ag->dev);
+ if (netif_msg_link(ag))
+ pr_info("%s: link down\n", ag->dev->name);
+ return;
+ }
+
+ if (pdata->is_ar724x)
+ ag71xx_fast_reset(ag);
+
+ cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
+ cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
+ cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
+
+ ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
+ ifctl &= ~(MAC_IFCTL_SPEED);
+
+ fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
+ fifo5 &= ~FIFO_CFG5_BM;
+
+ switch (ag->speed) {
+ case SPEED_1000:
+ cfg2 |= MAC_CFG2_IF_1000;
+ fifo5 |= FIFO_CFG5_BM;
+ break;
+ case SPEED_100:
+ cfg2 |= MAC_CFG2_IF_10_100;
+ ifctl |= MAC_IFCTL_SPEED;
+ break;
+ case SPEED_10:
+ cfg2 |= MAC_CFG2_IF_10_100;
+ break;
+ default:
+ BUG();
+ return;
+ }
+
+ if (pdata->is_ar91xx)
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x00780fff);
+ else if (pdata->is_ar724x)
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, pdata->fifo_cfg3);
+ else
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, 0x008001ff);
+
+ if (pdata->set_speed)
+ pdata->set_speed(ag->speed);
+
+ ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
+ ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
+ ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
+ ag71xx_hw_start(ag);
+
+ netif_carrier_on(ag->dev);
+ if (netif_msg_link(ag))
+ pr_info("%s: link up (%sMbps/%s duplex)\n",
+ ag->dev->name,
+ ag71xx_speed_str(ag),
+ (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
+
+ DBG("%s: fifo_cfg0=%#x, fifo_cfg1=%#x, fifo_cfg2=%#x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
+
+ DBG("%s: fifo_cfg3=%#x, fifo_cfg4=%#x, fifo_cfg5=%#x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
+ ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
+
+ DBG("%s: mac_cfg2=%#x, mac_ifctl=%#x\n",
+ ag->dev->name,
+ ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
+ ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL));
+}
+
+static int ag71xx_open(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ int ret;
+
+ ret = ag71xx_rings_init(ag);
+ if (ret)
+ goto err;
+
+ napi_enable(&ag->napi);
+
+ netif_carrier_off(dev);
+ ag71xx_phy_start(ag);
+
+ ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
+ ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
+
+ ag71xx_hw_set_macaddr(ag, dev->dev_addr);
+
+ netif_start_queue(dev);
+
+ return 0;
+
+err:
+ ag71xx_rings_cleanup(ag);
+ return ret;
+}
+
+static int ag71xx_stop(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ unsigned long flags;
+
+ netif_carrier_off(dev);
+ ag71xx_phy_stop(ag);
+
+ spin_lock_irqsave(&ag->lock, flags);
+
+ netif_stop_queue(dev);
+
+ ag71xx_hw_stop(ag);
+ ag71xx_dma_reset(ag);
+
+ napi_disable(&ag->napi);
+ del_timer_sync(&ag->oom_timer);
+
+ spin_unlock_irqrestore(&ag->lock, flags);
+
+ ag71xx_rings_cleanup(ag);
+
+ return 0;
+}
+
+static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ struct ag71xx_desc *desc;
+ dma_addr_t dma_addr;
+ int i;
+
+ i = ring->curr % ring->size;
+ desc = ring->buf[i].desc;
+
+ if (!ag71xx_desc_empty(desc))
+ goto err_drop;
+
+ if (ag71xx_has_ar8216(ag))
+ ag71xx_add_ar8216_header(ag, skb);
+
+ if (skb->len <= 0) {
+ DBG("%s: packet len is too small\n", ag->dev->name);
+ goto err_drop;
+ }
+
+ dma_addr = dma_map_single(&dev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+
+ ring->buf[i].skb = skb;
+ ring->buf[i].timestamp = jiffies;
+
+ /* setup descriptor fields */
+ desc->data = (u32) dma_addr;
+ desc->ctrl = (skb->len & DESC_PKTLEN_M);
+
+ /* flush descriptor */
+ wmb();
+
+ ring->curr++;
+ if (ring->curr == (ring->dirty + ring->size)) {
+ DBG("%s: tx queue full\n", ag->dev->name);
+ netif_stop_queue(dev);
+ }
+
+ DBG("%s: packet injected into TX queue\n", ag->dev->name);
+
+ /* enable TX engine */
+ ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
+
+ return NETDEV_TX_OK;
+
+err_drop:
+ dev->stats.tx_dropped++;
+
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ int ret;
+
+ switch (cmd) {
+ case SIOCETHTOOL:
+ if (ag->phy_dev == NULL)
+ break;
+
+ spin_lock_irq(&ag->lock);
+ ret = phy_ethtool_ioctl(ag->phy_dev, (void *) ifr->ifr_data);
+ spin_unlock_irq(&ag->lock);
+ return ret;
+
+ case SIOCSIFHWADDR:
+ if (copy_from_user
+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGIFHWADDR:
+ if (copy_to_user
+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
+ return -EFAULT;
+ return 0;
+
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (ag->phy_dev == NULL)
+ break;
+
+ return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
+
+ default:
+ break;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static void ag71xx_oom_timer_handler(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct ag71xx *ag = netdev_priv(dev);
+
+ napi_schedule(&ag->napi);
+}
+
+static void ag71xx_tx_timeout(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+
+ if (netif_msg_tx_err(ag))
+ pr_info("%s: tx timeout\n", ag->dev->name);
+
+ schedule_work(&ag->restart_work);
+}
+
+static void ag71xx_restart_work_func(struct work_struct *work)
+{
+ struct ag71xx *ag = container_of(work, struct ag71xx, restart_work);
+
+ if (ag71xx_get_pdata(ag)->is_ar724x) {
+ ag->link = 0;
+ ag71xx_link_adjust(ag);
+ return;
+ }
+
+ ag71xx_stop(ag->dev);
+ ag71xx_open(ag->dev);
+}
+
+static bool ag71xx_check_dma_stuck(struct ag71xx *ag, unsigned long timestamp)
+{
+ u32 rx_sm, tx_sm, rx_fd;
+
+ if (likely(time_before(jiffies, timestamp + HZ/10)))
+ return false;
+
+ if (!netif_carrier_ok(ag->dev))
+ return false;
+
+ rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
+ if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
+ return true;
+
+ tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
+ rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
+ if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
+ ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
+ return true;
+
+ return false;
+}
+
+static int ag71xx_tx_packets(struct ag71xx *ag)
+{
+ struct ag71xx_ring *ring = &ag->tx_ring;
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ int sent;
+
+ DBG("%s: processing TX ring\n", ag->dev->name);
+
+ sent = 0;
+ while (ring->dirty != ring->curr) {
+ unsigned int i = ring->dirty % ring->size;
+ struct ag71xx_desc *desc = ring->buf[i].desc;
+ struct sk_buff *skb = ring->buf[i].skb;
+
+ if (!ag71xx_desc_empty(desc)) {
+ if (pdata->is_ar7240 &&
+ ag71xx_check_dma_stuck(ag, ring->buf[i].timestamp))
+ schedule_work(&ag->restart_work);
+ break;
+ }
+
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
+
+ ag->dev->stats.tx_bytes += skb->len;
+ ag->dev->stats.tx_packets++;
+
+ dev_kfree_skb_any(skb);
+ ring->buf[i].skb = NULL;
+
+ ring->dirty++;
+ sent++;
+ }
+
+ DBG("%s: %d packets sent out\n", ag->dev->name, sent);
+
+ if ((ring->curr - ring->dirty) < (ring->size * 3) / 4)
+ netif_wake_queue(ag->dev);
+
+ return sent;
+}
+
+static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
+{
+ struct net_device *dev = ag->dev;
+ struct ag71xx_ring *ring = &ag->rx_ring;
+ int done = 0;
+
+ DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
+ dev->name, limit, ring->curr, ring->dirty);
+
+ while (done < limit) {
+ unsigned int i = ring->curr % ring->size;
+ struct ag71xx_desc *desc = ring->buf[i].desc;
+ struct sk_buff *skb;
+ int pktlen;
+ int err = 0;
+
+ if (ag71xx_desc_empty(desc))
+ break;
+
+ if ((ring->dirty + ring->size) == ring->curr) {
+ ag71xx_assert(0);
+ break;
+ }
+
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
+
+ skb = ring->buf[i].skb;
+ pktlen = ag71xx_desc_pktlen(desc);
+ pktlen -= ETH_FCS_LEN;
+
+ dma_unmap_single(&dev->dev, ring->buf[i].dma_addr,
+ AG71XX_RX_PKT_SIZE, DMA_FROM_DEVICE);
+
+ dev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pktlen;
+
+ skb_put(skb, pktlen);
+ if (ag71xx_has_ar8216(ag))
+ err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
+
+ if (err) {
+ dev->stats.rx_dropped++;
+ kfree_skb(skb);
+ } else {
+ skb->dev = dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ if (ag->phy_dev) {
+ ag->phy_dev->netif_receive_skb(skb);
+ } else {
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_receive_skb(skb);
+ }
+ }
+
+ ring->buf[i].skb = NULL;
+ done++;
+
+ ring->curr++;
+ }
+
+ ag71xx_ring_rx_refill(ag);
+
+ DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
+ dev->name, ring->curr, ring->dirty, done);
+
+ return done;
+}
+
+static int ag71xx_poll(struct napi_struct *napi, int limit)
+{
+ struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct net_device *dev = ag->dev;
+ struct ag71xx_ring *rx_ring;
+ unsigned long flags;
+ u32 status;
+ int tx_done;
+ int rx_done;
+
+ pdata->ddr_flush();
+ tx_done = ag71xx_tx_packets(ag);
+
+ DBG("%s: processing RX ring\n", dev->name);
+ rx_done = ag71xx_rx_packets(ag, limit);
+
+ ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
+
+ rx_ring = &ag->rx_ring;
+ if (rx_ring->buf[rx_ring->dirty % rx_ring->size].skb == NULL)
+ goto oom;
+
+ status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
+ if (unlikely(status & RX_STATUS_OF)) {
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
+ dev->stats.rx_fifo_errors++;
+
+ /* restart RX */
+ ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
+ }
+
+ if (rx_done < limit) {
+ if (status & RX_STATUS_PR)
+ goto more;
+
+ status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
+ if (status & TX_STATUS_PS)
+ goto more;
+
+ DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
+ dev->name, rx_done, tx_done, limit);
+
+ napi_complete(napi);
+
+ /* enable interrupts */
+ spin_lock_irqsave(&ag->lock, flags);
+ ag71xx_int_enable(ag, AG71XX_INT_POLL);
+ spin_unlock_irqrestore(&ag->lock, flags);
+ return rx_done;
+ }
+
+more:
+ DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
+ dev->name, rx_done, tx_done, limit);
+ return rx_done;
+
+oom:
+ if (netif_msg_rx_err(ag))
+ pr_info("%s: out of memory\n", dev->name);
+
+ mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
+ napi_complete(napi);
+ return 0;
+}
+
+static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct ag71xx *ag = netdev_priv(dev);
+ u32 status;
+
+ status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
+ ag71xx_dump_intr(ag, "raw", status);
+
+ if (unlikely(!status))
+ return IRQ_NONE;
+
+ if (unlikely(status & AG71XX_INT_ERR)) {
+ if (status & AG71XX_INT_TX_BE) {
+ ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
+ dev_err(&dev->dev, "TX BUS error\n");
+ }
+ if (status & AG71XX_INT_RX_BE) {
+ ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
+ dev_err(&dev->dev, "RX BUS error\n");
+ }
+ }
+
+ if (likely(status & AG71XX_INT_POLL)) {
+ ag71xx_int_disable(ag, AG71XX_INT_POLL);
+ DBG("%s: enable polling mode\n", dev->name);
+ napi_schedule(&ag->napi);
+ }
+
+ ag71xx_debugfs_update_int_stats(ag, status);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void ag71xx_netpoll(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ ag71xx_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static const struct net_device_ops ag71xx_netdev_ops = {
+ .ndo_open = ag71xx_open,
+ .ndo_stop = ag71xx_stop,
+ .ndo_start_xmit = ag71xx_hard_start_xmit,
+ .ndo_do_ioctl = ag71xx_do_ioctl,
+ .ndo_tx_timeout = ag71xx_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ag71xx_netpoll,
+#endif
+};
+
+static int __devinit ag71xx_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct resource *res;
+ struct ag71xx *ag;
+ struct ag71xx_platform_data *pdata;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ if (pdata->mii_bus_dev == NULL) {
+ dev_err(&pdev->dev, "no MII bus device specified\n");
+ err = -EINVAL;
+ goto err_out;
+ }
+
+ dev = alloc_etherdev(sizeof(*ag));
+ if (!dev) {
+ dev_err(&pdev->dev, "alloc_etherdev failed\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ ag = netdev_priv(dev);
+ ag->pdev = pdev;
+ ag->dev = dev;
+ ag->msg_enable = netif_msg_init(ag71xx_msg_level,
+ AG71XX_DEFAULT_MSG_ENABLE);
+ spin_lock_init(&ag->lock);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
+ if (!res) {
+ dev_err(&pdev->dev, "no mac_base resource found\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ ag->mac_base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (!ag->mac_base) {
+ dev_err(&pdev->dev, "unable to ioremap mac_base\n");
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+
+ dev->irq = platform_get_irq(pdev, 0);
+ err = request_irq(dev->irq, ag71xx_interrupt,
+ IRQF_DISABLED,
+ dev->name, dev);
+ if (err) {
+ dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
+ goto err_unmap_base;
+ }
+
+ dev->base_addr = (unsigned long)ag->mac_base;
+ dev->netdev_ops = &ag71xx_netdev_ops;
+ dev->ethtool_ops = &ag71xx_ethtool_ops;
+
+ INIT_WORK(&ag->restart_work, ag71xx_restart_work_func);
+
+ init_timer(&ag->oom_timer);
+ ag->oom_timer.data = (unsigned long) dev;
+ ag->oom_timer.function = ag71xx_oom_timer_handler;
+
+ ag->tx_ring.size = AG71XX_TX_RING_SIZE_DEFAULT;
+ ag->rx_ring.size = AG71XX_RX_RING_SIZE_DEFAULT;
+
+ ag->stop_desc = dma_alloc_coherent(NULL,
+ sizeof(struct ag71xx_desc), &ag->stop_desc_dma, GFP_KERNEL);
+
+ if (!ag->stop_desc)
+ goto err_free_irq;
+
+ ag->stop_desc->data = 0;
+ ag->stop_desc->ctrl = 0;
+ ag->stop_desc->next = (u32) ag->stop_desc_dma;
+
+ memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
+
+ netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
+
+ err = register_netdev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "unable to register net device\n");
+ goto err_free_desc;
+ }
+
+ pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d\n",
+ dev->name, dev->base_addr, dev->irq);
+
+ ag71xx_dump_regs(ag);
+
+ ag71xx_hw_init(ag);
+
+ ag71xx_dump_regs(ag);
+
+ err = ag71xx_phy_connect(ag);
+ if (err)
+ goto err_unregister_netdev;
+
+ err = ag71xx_debugfs_init(ag);
+ if (err)
+ goto err_phy_disconnect;
+
+ platform_set_drvdata(pdev, dev);
+
+ return 0;
+
+err_phy_disconnect:
+ ag71xx_phy_disconnect(ag);
+err_unregister_netdev:
+ unregister_netdev(dev);
+err_free_desc:
+ dma_free_coherent(NULL, sizeof(struct ag71xx_desc), ag->stop_desc,
+ ag->stop_desc_dma);
+err_free_irq:
+ free_irq(dev->irq, dev);
+err_unmap_base:
+ iounmap(ag->mac_base);
+err_free_dev:
+ kfree(dev);
+err_out:
+ platform_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static int __devexit ag71xx_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+
+ if (dev) {
+ struct ag71xx *ag = netdev_priv(dev);
+
+ ag71xx_debugfs_exit(ag);
+ ag71xx_phy_disconnect(ag);
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ iounmap(ag->mac_base);
+ kfree(dev);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ag71xx_driver = {
+ .probe = ag71xx_probe,
+ .remove = __exit_p(ag71xx_remove),
+ .driver = {
+ .name = AG71XX_DRV_NAME,
+ }
+};
+
+static int __init ag71xx_module_init(void)
+{
+ int ret;
+
+ ret = ag71xx_debugfs_root_init();
+ if (ret)
+ goto err_out;
+
+ ret = ag71xx_mdio_driver_init();
+ if (ret)
+ goto err_debugfs_exit;
+
+ ret = platform_driver_register(&ag71xx_driver);
+ if (ret)
+ goto err_mdio_exit;
+
+ return 0;
+
+err_mdio_exit:
+ ag71xx_mdio_driver_exit();
+err_debugfs_exit:
+ ag71xx_debugfs_root_exit();
+err_out:
+ return ret;
+}
+
+static void __exit ag71xx_module_exit(void)
+{
+ platform_driver_unregister(&ag71xx_driver);
+ ag71xx_mdio_driver_exit();
+ ag71xx_debugfs_root_exit();
+}
+
+module_init(ag71xx_module_init);
+module_exit(ag71xx_module_exit);
+
+MODULE_VERSION(AG71XX_DRV_VERSION);
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+#define AG71XX_MDIO_RETRY 1000
+#define AG71XX_MDIO_DELAY 5
+
+static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
+ u32 value)
+{
+ void __iomem *r;
+
+ r = am->mdio_base + reg;
+ __raw_writel(value, r);
+
+ /* flush write */
+ (void) __raw_readl(r);
+}
+
+static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
+{
+ return __raw_readl(am->mdio_base + reg);
+}
+
+static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
+{
+ DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
+ am->mii_bus->name,
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
+ DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
+ am->mii_bus->name,
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
+ ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
+}
+
+int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
+{
+ int ret;
+ int i;
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
+ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
+
+ i = AG71XX_MDIO_RETRY;
+ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
+ if (i-- == 0) {
+ pr_err("%s: mii_read timed out\n", am->mii_bus->name);
+ ret = 0xffff;
+ goto out;
+ }
+ udelay(AG71XX_MDIO_DELAY);
+ }
+
+ ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
+
+ DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
+
+out:
+ return ret;
+}
+
+void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val)
+{
+ int i;
+
+ DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
+ ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
+
+ i = AG71XX_MDIO_RETRY;
+ while (ag71xx_mdio_rr(am, AG71XX_REG_MII_IND) & MII_IND_BUSY) {
+ if (i-- == 0) {
+ pr_err("%s: mii_write timed out\n", am->mii_bus->name);
+ break;
+ }
+ udelay(AG71XX_MDIO_DELAY);
+ }
+}
+
+static int ag71xx_mdio_reset(struct mii_bus *bus)
+{
+ struct ag71xx_mdio *am = bus->priv;
+ u32 t;
+
+ if (am->pdata->is_ar7240)
+ t = MII_CFG_CLK_DIV_6;
+ else
+ t = MII_CFG_CLK_DIV_28;
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
+ udelay(100);
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
+ udelay(100);
+
+ return 0;
+}
+
+static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
+{
+ struct ag71xx_mdio *am = bus->priv;
+
+ if (am->pdata->is_ar7240)
+ return ar7240sw_phy_read(bus, addr, reg);
+ else
+ return ag71xx_mdio_mii_read(am, addr, reg);
+}
+
+static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ struct ag71xx_mdio *am = bus->priv;
+
+ if (am->pdata->is_ar7240)
+ ar7240sw_phy_write(bus, addr, reg, val);
+ else
+ ag71xx_mdio_mii_write(am, addr, reg, val);
+ return 0;
+}
+
+static int __devinit ag71xx_mdio_probe(struct platform_device *pdev)
+{
+ struct ag71xx_mdio_platform_data *pdata;
+ struct ag71xx_mdio *am;
+ struct resource *res;
+ int i;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data specified\n");
+ return -EINVAL;
+ }
+
+ am = kzalloc(sizeof(*am), GFP_KERNEL);
+ if (!am) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ am->pdata = pdata;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no iomem resource found\n");
+ err = -ENXIO;
+ goto err_out;
+ }
+
+ am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (!am->mdio_base) {
+ dev_err(&pdev->dev, "unable to ioremap registers\n");
+ err = -ENOMEM;
+ goto err_free_mdio;
+ }
+
+ am->mii_bus = mdiobus_alloc();
+ if (am->mii_bus == NULL) {
+ err = -ENOMEM;
+ goto err_iounmap;
+ }
+
+ am->mii_bus->name = "ag71xx_mdio";
+ am->mii_bus->read = ag71xx_mdio_read;
+ am->mii_bus->write = ag71xx_mdio_write;
+ am->mii_bus->reset = ag71xx_mdio_reset;
+ am->mii_bus->irq = am->mii_irq;
+ am->mii_bus->priv = am;
+ am->mii_bus->parent = &pdev->dev;
+ snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
+ am->mii_bus->phy_mask = pdata->phy_mask;
+
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ am->mii_irq[i] = PHY_POLL;
+
+ ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
+
+ err = mdiobus_register(am->mii_bus);
+ if (err)
+ goto err_free_bus;
+
+ ag71xx_mdio_dump_regs(am);
+
+ platform_set_drvdata(pdev, am);
+ return 0;
+
+err_free_bus:
+ mdiobus_free(am->mii_bus);
+err_iounmap:
+ iounmap(am->mdio_base);
+err_free_mdio:
+ kfree(am);
+err_out:
+ return err;
+}
+
+static int __devexit ag71xx_mdio_remove(struct platform_device *pdev)
+{
+ struct ag71xx_mdio *am = platform_get_drvdata(pdev);
+
+ if (am) {
+ mdiobus_unregister(am->mii_bus);
+ mdiobus_free(am->mii_bus);
+ iounmap(am->mdio_base);
+ kfree(am);
+ platform_set_drvdata(pdev, NULL);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ag71xx_mdio_driver = {
+ .probe = ag71xx_mdio_probe,
+ .remove = __exit_p(ag71xx_mdio_remove),
+ .driver = {
+ .name = "ag71xx-mdio",
+ }
+};
+
+int __init ag71xx_mdio_driver_init(void)
+{
+ return platform_driver_register(&ag71xx_mdio_driver);
+}
+
+void ag71xx_mdio_driver_exit(void)
+{
+ platform_driver_unregister(&ag71xx_mdio_driver);
+}
--- /dev/null
+/*
+ * Atheros AR71xx built-in ethernet mac driver
+ *
+ * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Based on Atheros' AG7100 driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ag71xx.h"
+
+static void ag71xx_phy_link_adjust(struct net_device *dev)
+{
+ struct ag71xx *ag = netdev_priv(dev);
+ struct phy_device *phydev = ag->phy_dev;
+ unsigned long flags;
+ int status_change = 0;
+
+ spin_lock_irqsave(&ag->lock, flags);
+
+ if (phydev->link) {
+ if (ag->duplex != phydev->duplex
+ || ag->speed != phydev->speed) {
+ status_change = 1;
+ }
+ }
+
+ if (phydev->link != ag->link)
+ status_change = 1;
+
+ ag->link = phydev->link;
+ ag->duplex = phydev->duplex;
+ ag->speed = phydev->speed;
+
+ if (status_change)
+ ag71xx_link_adjust(ag);
+
+ spin_unlock_irqrestore(&ag->lock, flags);
+}
+
+void ag71xx_phy_start(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ if (ag->phy_dev) {
+ phy_start(ag->phy_dev);
+ } else if (pdata->switch_data) {
+ ag71xx_ar7240_start(ag);
+ } else {
+ ag->link = 1;
+ ag71xx_link_adjust(ag);
+ }
+}
+
+void ag71xx_phy_stop(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ unsigned long flags;
+
+ if (ag->phy_dev)
+ phy_stop(ag->phy_dev);
+ else if (pdata->switch_data)
+ ag71xx_ar7240_stop(ag);
+
+ spin_lock_irqsave(&ag->lock, flags);
+ if (ag->link) {
+ ag->link = 0;
+ ag71xx_link_adjust(ag);
+ }
+ spin_unlock_irqrestore(&ag->lock, flags);
+}
+
+static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
+{
+ struct net_device *dev = ag->dev;
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ int ret = 0;
+
+ /* use fixed settings */
+ switch (pdata->speed) {
+ case SPEED_10:
+ case SPEED_100:
+ case SPEED_1000:
+ break;
+ default:
+ netdev_err(dev, "invalid speed specified\n");
+ ret = -EINVAL;
+ break;
+ }
+
+ netdev_dbg(dev, "using fixed link parameters\n");
+
+ ag->duplex = pdata->duplex;
+ ag->speed = pdata->speed;
+
+ return ret;
+}
+
+static int ag71xx_phy_connect_multi(struct ag71xx *ag)
+{
+ struct net_device *dev = ag->dev;
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+ struct phy_device *phydev = NULL;
+ int phy_addr;
+ int ret = 0;
+
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ if (!(pdata->phy_mask & (1 << phy_addr)))
+ continue;
+
+ if (ag->mii_bus->phy_map[phy_addr] == NULL)
+ continue;
+
+ DBG("%s: PHY found at %s, uid=%08x\n",
+ dev->name,
+ dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
+ ag->mii_bus->phy_map[phy_addr]->phy_id);
+
+ if (phydev == NULL)
+ phydev = ag->mii_bus->phy_map[phy_addr];
+ }
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found with phy_mask=%08x\n",
+ pdata->phy_mask);
+ return -ENODEV;
+ }
+
+ ag->phy_dev = phy_connect(dev, dev_name(&phydev->dev),
+ &ag71xx_phy_link_adjust, 0,
+ pdata->phy_if_mode);
+
+ if (IS_ERR(ag->phy_dev)) {
+ netdev_err(dev, "could not connect to PHY at %s\n",
+ dev_name(&phydev->dev));
+ return PTR_ERR(ag->phy_dev);
+ }
+
+ /* mask with MAC supported features */
+ if (pdata->has_gbit)
+ phydev->supported &= PHY_GBIT_FEATURES;
+ else
+ phydev->supported &= PHY_BASIC_FEATURES;
+
+ phydev->advertising = phydev->supported;
+
+ netdev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
+ dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
+
+ ag->link = 0;
+ ag->speed = 0;
+ ag->duplex = -1;
+
+ return ret;
+}
+
+static int dev_is_class(struct device *dev, void *class)
+{
+ if (dev->class != NULL && !strcmp(dev->class->name, class))
+ return 1;
+
+ return 0;
+}
+
+static struct device *dev_find_class(struct device *parent, char *class)
+{
+ if (dev_is_class(parent, class)) {
+ get_device(parent);
+ return parent;
+ }
+
+ return device_find_child(parent, class, dev_is_class);
+}
+
+static struct mii_bus *dev_to_mii_bus(struct device *dev)
+{
+ struct device *d;
+
+ d = dev_find_class(dev, "mdio_bus");
+ if (d != NULL) {
+ struct mii_bus *bus;
+
+ bus = to_mii_bus(d);
+ put_device(d);
+
+ return bus;
+ }
+
+ return NULL;
+}
+
+int __devinit ag71xx_phy_connect(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ if (pdata->mii_bus_dev == NULL ||
+ pdata->mii_bus_dev->bus == NULL )
+ return ag71xx_phy_connect_fixed(ag);
+
+ ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
+ if (ag->mii_bus == NULL) {
+ netdev_err(ag->dev, "unable to find MII bus on device '%s'\n",
+ dev_name(pdata->mii_bus_dev));
+ return -ENODEV;
+ }
+
+ /* Reset the mdio bus explicitly */
+ if (ag->mii_bus->reset) {
+ mutex_lock(&ag->mii_bus->mdio_lock);
+ ag->mii_bus->reset(ag->mii_bus);
+ mutex_unlock(&ag->mii_bus->mdio_lock);
+ }
+
+ if (pdata->switch_data)
+ return ag71xx_ar7240_init(ag);
+
+ if (pdata->phy_mask)
+ return ag71xx_phy_connect_multi(ag);
+
+ return ag71xx_phy_connect_fixed(ag);
+}
+
+void ag71xx_phy_disconnect(struct ag71xx *ag)
+{
+ struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
+
+ if (pdata->switch_data)
+ ag71xx_ar7240_cleanup(ag);
+ else if (ag->phy_dev)
+ phy_disconnect(ag->phy_dev);
+}
projects / openwrt / staging / blocktrron.git / commitdiff