;;
archer-c59-v1|\
archer-c60-v1)
- ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x3C"
- ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
+ ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
;;
archer-c59-v1|\
+ rb-450g)
+ ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+ ;;
archer-c60-v1)
+ ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
+ "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
;;
arduino-yun|\
dir-505-a1|\
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1"
;;
- rb-450g)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
- ;;
routerstation-pro)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
ARRAY_SIZE(archer_c59_v1_gpio_keys),
archer_c59_v1_gpio_keys);
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+
+ ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_mask = BIT(4);
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
-
ath79_register_usb();
gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
ARRAY_SIZE(archer_c60_v1_gpio_keys),
archer_c60_v1_gpio_keys);
- ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
- QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+ ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);
ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);