#include <asm/config_mpc86xx.h>
#endif
-#ifdef CONFIG_MPC83xx
-#endif
-
#ifndef HWCONFIG_BUFFER_SIZE
#define HWCONFIG_BUFFER_SIZE 256
#endif
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CONFIG_ULI526X
-#ifdef CONFIG_ULI526X
-#endif
/************************************************************
* USB support
#undef CONFIG_SYS_FLASH_EMPTY_INFO
#endif
-#ifndef CONFIG_FSL_DIU_FB
-#endif
-
#ifdef CONFIG_ATI
#define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT
#define CONFIG_BIOSEMU
/*
* eSPI - Enhanced SPI
*/
-#ifndef CONFIG_SPL_BUILD
-#endif
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_SF_DEFAULT_MODE 0
* eSPI - Enhanced SPI
*/
#ifdef CONFIG_SPI_FLASH
-#ifndef CONFIG_SPL_BUILD
-#endif
#define CONFIG_SPI_FLASH_BAR
#define CONFIG_SF_DEFAULT_SPEED 10000000
#define CONFIG_NETMASK 255.255.252.0
#define CONFIG_ETHPRIME "eTSEC3"
-#ifndef CONFIG_SPI_FLASH
-#endif
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_SYS_L2_SIZE (256 << 10)
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-#ifndef CONFIG_SYS_DCACHE_OFF
-#endif
-
#define CONFIG_SYS_FSL_USDHC_NUM 3
/* Framebuffer */
#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100
-#ifndef CONFIG_TRAILBLAZER
-#endif
-
#define CONFIG_PCA9698 /* NXP PCA9698 */
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
#include <asm/fsl_secure_boot.h>
-#ifdef CONFIG_SECURE_BOOT
-#endif
-
#endif /* __CONFIG_H */
#define CONFIG_CLOCKS
#endif
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
/* NAND Setup */
#ifdef CONFIG_SYS_USE_NAND
#define CONFIG_MTD_DEVICE
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#endif
-/* SPI Flash */
-#ifdef CONFIG_USE_SPIFLASH
-#endif
-
#if !defined(CONFIG_SYS_USE_NAND) && \
!defined(CONFIG_USE_NOR) && \
!defined(CONFIG_USE_SPIFLASH)
#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
#define CONFIG_ENV_SPI_MAX_HZ 15000000
-#ifndef MINIMAL_LOADER
-#endif
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
-#ifndef CONFIG_SYS_DCACHE_OFF
-#endif
-
#define CONFIG_SYS_FSL_USDHC_NUM 3
/* Framebuffer */
#define CONFIG_CLOCKS
#endif
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#endif
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
-/*
- * Commands configuration
- */
-#ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
-#endif
-
/*
* Core clock definition
*/
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-#ifndef CONFIG_SYS_DCACHE_OFF
-#endif
-
#ifdef CONFIG_FSL_QSPI
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_CLOCKS
#endif
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
#ifdef CONFIG_USE_NAND
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
#endif
-#ifdef CONFIG_USB_FUNCTION_MASS_STORAGE
-#endif
-
#ifdef CONFIG_USB_KEYBOARD
#define CONFIG_PREBOOT
#endif
#ifdef CONFIG_SYS_I2C_TEGRA
#undef CONFIG_SYS_I2C_TEGRA
#endif
-#ifdef CONFIG_CMD_I2C
-#endif
/* remove USB */
#ifdef CONFIG_USB_EHCI_TEGRA
#undef CONFIG_USB_EHCI_TEGRA
#endif
-#ifdef CONFIG_CMD_USB
-#endif
#endif /* CONFIG_SPL_BUILD */
# define CONFIG_BOOTP_MAY_FAIL
#endif
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-#endif
-
/* QSPI */
#ifdef CONFIG_ZYNQ_QSPI
# define CONFIG_SF_DEFAULT_SPEED 30000000