[ARM] pxa/sharpsl_pm: cleanup of gpio-related code.

Replace calls to pxa_gpio_mode with respective gpio_request() /
gpio_direction_input(). In principle these calls can be dropped as
the only use of those GPIO are IRQs and IRQ code does setup GPIO
correctly.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index a8facf476fa4ee749086d59c05810405c61038c7..dfac7b9a73528870940891c1c22611457cc6cb80 100644 (file)
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/suspend.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <mach/pm.h>
@@ -918,9 +919,12 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
 
        sharpsl_pm.machinfo->init();
 
-       pxa_gpio_mode(sharpsl_pm.machinfo->gpio_acin | GPIO_IN);
-       pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batfull | GPIO_IN);
-       pxa_gpio_mode(sharpsl_pm.machinfo->gpio_batlock | GPIO_IN);
+       gpio_request(sharpsl_pm.machinfo->gpio_acin, "AC IN");
+       gpio_direction_input(sharpsl_pm.machinfo->gpio_acin);
+       gpio_request(sharpsl_pm.machinfo->gpio_batfull, "Battery Full");
+       gpio_direction_input(sharpsl_pm.machinfo->gpio_batfull);
+       gpio_request(sharpsl_pm.machinfo->gpio_batlock, "Battery Lock");
+       gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
 
        /* Register interrupt handlers */
        if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
@@ -979,6 +983,10 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
        if (sharpsl_pm.machinfo->batfull_irq)
                free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
 
+       gpio_free(sharpsl_pm.machinfo->gpio_batlock);
+       gpio_free(sharpsl_pm.machinfo->gpio_batfull);
+       gpio_free(sharpsl_pm.machinfo->gpio_acin);
+
        if (sharpsl_pm.machinfo->exit)
                sharpsl_pm.machinfo->exit();