help
Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)
-config BR2_LINUX_2_4_SOEKRIS
- bool "Support for Soekris boards [2.4]"
+config BR2_LINUX_2_4_X86
+ bool "Support for x86 boards [2.4]"
default n
depends BR2_i386
help
- Build firmware images for Soekris based boards
- (e.g. net4521, net4801)
+ Build firmware images for x86 based boards
+ (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
config BR2_LINUX_2_6_BRCM
bool "Support for Broadcom based routers [2.6]"
config BR2_PACKAGE_KMOD_NATSEMI
tristate "Soekris net4801 ethernet driver"
default y
- depends BR2_LINUX_2_4_SOEKRIS
+ depends BR2_LINUX_2_4_X86
help
Driver for the National Semiconductor DP8381x series PCI Ethernet
found on Soekris net4801 boards
config BR2_PACKAGE_KMOD_WD1100
tristate "Soekris net4801 watchdog"
default y
- depends BR2_LINUX_2_4_SOEKRIS
+ depends BR2_LINUX_2_4_X86
help
Driver for the NatSemi SC1x00 series Watchdog
found on Soekris net4801 boards
$(eval $(call kernel_template,2.4,brcm,2_4_BRCM))
$(eval $(call kernel_template,2.4,ar7,2_4_AR7))
-$(eval $(call kernel_template,2.4,soekris,2_4_SOEKRIS))
+$(eval $(call kernel_template,2.4,x86,2_4_X86))
$(eval $(call kernel_template,2.6,brcm,2_6_BRCM))
+++ /dev/null
-include $(TOPDIR)/rules.mk
-
-KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
-
-
-ifeq ($(FS),jffs2-8MB)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img: $(KDIR)/root.$(FS)
- cp $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
-
-endif
-
-
-ifeq ($(FS),tgz)
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/root.tar.gz
- cp $^ $@
-
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
-
-endif
-
-
-$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz: $(KDIR)/bzImage
- cp $^ $@
-
-
-clean:
-prepare:
-compile:
-install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz
-install-ib:
- mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
- cp -fpR $(KDIR)/bzImage $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
$(KDIR)/root.tar.gz:
tar -zcf $@ --owner=root --group=root -C $(KDIR)/root/ .
-ifeq ($(BOARD),soekris)
+ifeq ($(BOARD),x86)
install: tgz-install
tgz-install: $(KDIR)/root.tar.gz
--- /dev/null
+include $(TOPDIR)/rules.mk
+
+KDIR:=$(BUILD_DIR)/linux-$(KERNEL)-$(BOARD)
+
+
+ifeq ($(FS),jffs2-8MB)
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img: $(KDIR)/root.$(FS)
+ cp $^ $@
+
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(FS).img
+
+endif
+
+
+ifeq ($(FS),tgz)
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz: $(KDIR)/root.tar.gz
+ cp $^ $@
+
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-rootfs.tar.gz
+
+endif
+
+
+$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz: $(KDIR)/bzImage
+ cp $^ $@
+
+
+clean:
+prepare:
+compile:
+install: $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinuz
+install-ib:
+ mkdir -p $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)
+ cp -fpR $(KDIR)/bzImage $(IB_DIR)/build_$(ARCH)/linux-$(KERNEL)-$(BOARD)/
+++ /dev/null
-base-files
-base-files-soekris-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-kmod-natsemi
-kmod-ppp
-kmod-pppoe
-libgcc
-mtd
-ppp
-ppp-mod-pppoe
-uclibc
-wireless-tools
-zlib
--- /dev/null
+base-files
+base-files-x86-2.4
+bridge
+busybox
+dnsmasq
+dropbear
+iptables
+kmod-natsemi
+kmod-ppp
+kmod-pppoe
+libgcc
+mtd
+ppp
+ppp-mod-pppoe
+uclibc
+wireless-tools
+zlib
+++ /dev/null
-base-files
-base-files-soekris-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-hotplug
-kmod-natsemi
-libgcc
-mtd
-uclibc
-wireless-tools
-zlib
--- /dev/null
+base-files
+base-files-x86-2.4
+bridge
+busybox
+dnsmasq
+dropbear
+iptables
+hotplug
+kmod-natsemi
+libgcc
+mtd
+uclibc
+wireless-tools
+zlib
+++ /dev/null
-base-files
-base-files-soekris-2.4
-bridge
-busybox
-dnsmasq
-dropbear
-iptables
-hotplug
-kmod-natsemi
-kmod-ppp
-kmod-gre
-libgcc
-mtd
-ppp
-pptp
-uclibc
-wireless-tools
-zlib
--- /dev/null
+base-files
+base-files-x86-2.4
+bridge
+busybox
+dnsmasq
+dropbear
+iptables
+hotplug
+kmod-natsemi
+kmod-ppp
+kmod-gre
+libgcc
+mtd
+ppp
+pptp
+uclibc
+wireless-tools
+zlib
include ./broadcom.mk
endif
-ifeq ($(BOARD),soekris)
-include ./soekris.mk
+ifeq ($(BOARD),x86)
+include ./x86.mk
endif
ifeq ($(BOARD),ar7)
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_X86=y
-# CONFIG_SBUS is not set
-CONFIG_UID16=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_KMOD is not set
-
-#
-# Processor type and features
-#
-# CONFIG_M386 is not set
-CONFIG_M486=y
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MELAN is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MGEODE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_X86_L1_CACHE_SHIFT=4
-CONFIG_X86_USE_STRING_486=y
-CONFIG_X86_ALIGNMENT_16=y
-CONFIG_X86_PPRO_FENCE=y
-# CONFIG_X86_F00F_WORKS_OK is not set
-CONFIG_X86_MCE=y
-# CONFIG_TOSHIBA is not set
-# CONFIG_I8K is not set
-# CONFIG_MICROCODE is not set
-# CONFIG_X86_MSR is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-# CONFIG_HIGHMEM64G is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_MTRR is not set
-# CONFIG_SMP is not set
-# CONFIG_X86_UP_APIC is not set
-# CONFIG_X86_UP_IOAPIC is not set
-# CONFIG_X86_TSC_DISABLE is not set
-
-#
-# General setup
-#
-CONFIG_NET=y
-CONFIG_PCI=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_ISA=y
-# CONFIG_PCI_NAMES is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_HOTPLUG=y
-
-#
-# PCMCIA/CardBus support
-#
-CONFIG_PCMCIA=m
-CONFIG_CARDBUS=y
-# CONFIG_TCIC is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
-# CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_KCORE_ELF=y
-# CONFIG_KCORE_AOUT is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_OOM_KILLER is not set
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# ACPI Support
-#
-# CONFIG_ACPI is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_GEN_PROBE is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_CFI_SSTSTD is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_AMDSTD is not set
-# CONFIG_MTD_SHARP is not set
-# CONFIG_MTD_JEDEC is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PNC2000 is not set
-# CONFIG_MTD_SC520CDP is not set
-# CONFIG_MTD_NETSC520 is not set
-# CONFIG_MTD_SBC_GXX is not set
-# CONFIG_MTD_ELAN_104NC is not set
-# CONFIG_MTD_DILNETPC is not set
-# CONFIG_MTD_MIXMEM is not set
-# CONFIG_MTD_OCTAGON is not set
-# CONFIG_MTD_VMAX is not set
-# CONFIG_MTD_SCx200_DOCFLASH is not set
-# CONFIG_MTD_L440GX is not set
-# CONFIG_MTD_AMD76XROM is not set
-# CONFIG_MTD_ICH2ROM is not set
-# CONFIG_MTD_NETtel is not set
-# CONFIG_MTD_SCB2_FLASH is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_BLKMTD=y
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC1000 is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOCPROBE is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play configuration
-#
-CONFIG_PNP=m
-CONFIG_ISAPNP=m
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_CISS_SCSI_TAPE is not set
-# CONFIG_CISS_MONITOR_THREAD is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_BLK_STATS is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-# CONFIG_BLK_DEV_MD is not set
-# CONFIG_MD_LINEAR is not set
-# CONFIG_MD_RAID0 is not set
-# CONFIG_MD_RAID1 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_BLK_DEV_LVM is not set
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_FILTER is not set
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_NAT=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_TOS=y
-# CONFIG_IP_ROUTE_VERBOSE is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_FTP=y
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_IRC=y
-CONFIG_IP_NF_CT_PROTO_GRE=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=y
-CONFIG_IP_NF_MATCH_MULTIPORT=y
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_IPP2P=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=y
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=y
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_UNCLEAN=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_LAYER7=m
-# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
-CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_IP_NF_TARGET_MIRROR=m
-CONFIG_IP_NF_NAT=y
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_PROTO_GRE=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=y
-CONFIG_IP_NF_NAT_FTP=y
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_MANGLE=y
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=y
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_LOG=y
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=y
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_SET=m
-CONFIG_IP_NF_SET_MAX=256
-CONFIG_IP_NF_SET_HASHSIZE=1024
-CONFIG_IP_NF_MATCH_SET=m
-CONFIG_IP_NF_TARGET_SET=m
-CONFIG_IP_NF_SET_IPMAP=m
-CONFIG_IP_NF_SET_PORTMAP=m
-CONFIG_IP_NF_SET_MACIPMAP=m
-CONFIG_IP_NF_SET_IPHASH=m
-CONFIG_IP_NF_SET_NETHASH=m
-CONFIG_IP_NF_SET_IPTREE=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_AHESP is not set
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-# CONFIG_KHTTPD is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_VLAN_8021Q=y
-
-#
-#
-#
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_DECNET is not set
-CONFIG_BRIDGE=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_LLC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
-# CONFIG_NET_FASTROUTE is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_CSZ=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-# CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-# CONFIG_PHONE_IXJ is not set
-# CONFIG_PHONE_IXJ_PCMCIA is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
-# CONFIG_BLK_DEV_ISAPNP is not set
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_BLK_DEV_GENERIC is not set
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_BLK_DEV_OFFBOARD=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_PCI_WIP is not set
-# CONFIG_BLK_DEV_ADMA100 is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_WDC_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_HPT34X_AUTODMA is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_PDC202XX_BURST is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-CONFIG_BLK_DEV_SC1200=y
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_IDEDMA_AUTO=y
-CONFIG_IDEDMA_IVB=y
-# CONFIG_DMA_NONPCI is not set
-# CONFIG_BLK_DEV_ATARAID is not set
-# CONFIG_BLK_DEV_ATARAID_PDC is not set
-# CONFIG_BLK_DEV_ATARAID_HPT is not set
-# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
-# CONFIG_BLK_DEV_ATARAID_SII is not set
-
-#
-# SCSI support
-#
-CONFIG_SCSI=m
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_SD_EXTRA_DEVS=5
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_DEBUG_QUEUES is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_MEGARAID2 is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_SATA_AHCI is not set
-# CONFIG_SCSI_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
-# CONFIG_SCSI_SATA_NV is not set
-# CONFIG_SCSI_SATA_QSTOR is not set
-# CONFIG_SCSI_SATA_PROMISE is not set
-# CONFIG_SCSI_SATA_SX4 is not set
-# CONFIG_SCSI_SATA_SIL is not set
-# CONFIG_SCSI_SATA_SIS is not set
-# CONFIG_SCSI_SATA_ULI is not set
-# CONFIG_SCSI_SATA_VIA is not set
-# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_DMA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-# CONFIG_SCSI_SYM53C8XX is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_SEAGATE is not set
-# CONFIG_SCSI_SIM710 is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_SCSI_PCMCIA is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_BOOT is not set
-# CONFIG_FUSION_ISENSE is not set
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LAN is not set
-
-#
-# IEEE 1394 (FireWire) support (EXPERIMENTAL)
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-# CONFIG_I2O_PCI is not set
-# CONFIG_I2O_BLOCK is not set
-# CONFIG_I2O_LAN is not set
-# CONFIG_I2O_SCSI is not set
-# CONFIG_I2O_PROC is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-CONFIG_NET_RANDOM=y
-# CONFIG_ETHERTAP is not set
-# CONFIG_NET_SB1000 is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNBMAC is not set
-# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_LNE390 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
-# CONFIG_NE2K_PCI is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_NE3210 is not set
-# CONFIG_ES3210 is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNDANCE_MMIO is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_MYRI_SBUS is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE_MPPC=m
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_STRIP is not set
-# CONFIG_WAVELAN is not set
-# CONFIG_ARLAN is not set
-# CONFIG_AIRONET4500 is not set
-# CONFIG_AIRONET4500_NONCS is not set
-# CONFIG_AIRONET4500_PROC is not set
-# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-
-#
-# Wireless Pcmcia cards support
-#
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_PCMCIA_ATMEL is not set
-
-#
-# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
-#
-# CONFIG_PRISM54 is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-CONFIG_SHAPER=m
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# PCMCIA network device support
-#
-CONFIG_NET_PCMCIA=y
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_ARCNET_COM20020_CS is not set
-# CONFIG_PCMCIA_IBMTR is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
-# CONFIG_NET_PCMCIA_RADIO is not set
-
-#
-# Amateur Radio support
-#
-CONFIG_HAMRADIO=y
-CONFIG_AX25=m
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_NETROM is not set
-# CONFIG_ROSE is not set
-
-#
-# AX.25 network device drivers
-#
-CONFIG_MKISS=m
-# CONFIG_6PACK is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_DMASCC is not set
-# CONFIG_SCC is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_SOUNDMODEM is not set
-# CONFIG_YAM is not set
-
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=128
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_INPUT_GAMEPORT is not set
-
-#
-# Input core support is needed for gameports
-#
-
-#
-# Input core support is needed for joysticks
-#
-# CONFIG_QIC02_TAPE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPMI_PANIC_EVENT is not set
-# CONFIG_IPMI_DEVICE_INTERFACE is not set
-# CONFIG_IPMI_KCS is not set
-# CONFIG_IPMI_WATCHDOG is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_SC520_WDT is not set
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_EUROTECH_WDT is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_WAFER_WDT is not set
-# CONFIG_I810_TCO is not set
-# CONFIG_MIXCOMWD is not set
-# CONFIG_60XX_WDT is not set
-CONFIG_SC1200_WDT=m
-CONFIG_SCx200_WDT=m
-CONFIG_SOFT_WATCHDOG=y
-# CONFIG_W83877F_WDT is not set
-# CONFIG_WDT is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_MACHZ_WDT is not set
-CONFIG_WD1100=m
-CONFIG_SCx200=m
-CONFIG_SCx200_GPIO=m
-# CONFIG_AMD_RNG is not set
-# CONFIG_INTEL_RNG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_AMD_PM768 is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-
-#
-# Direct Rendering Manager (XFree86 DRI support)
-#
-# CONFIG_DRM is not set
-# CONFIG_MWAVE is not set
-
-#
-# PCMCIA character devices
-#
-# CONFIG_PCMCIA_SERIAL_CS is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_MWAVE is not set
-# CONFIG_OBMOUSE is not set
-
-#
-# File systems
-#
-# CONFIG_QUOTA is not set
-# CONFIG_QFMT_V2 is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADFS_FS_RW is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BEFS_DEBUG is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EXT3_FS=m
-CONFIG_JBD=m
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FAT_FS=m
-# CONFIG_MSDOS_FS is not set
-# CONFIG_UMSDOS_FS is not set
-CONFIG_VFAT_FS=m
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_BBC_ARMLIB is not set
-# CONFIG_JFFS2_BBC_LZO is not set
-CONFIG_JFFS2_BBC_LZARI=y
-# CONFIG_JFFS2_BBC_LZHD is not set
-# CONFIG_JFFS2_BBC_LZSS is not set
-# CONFIG_CRAMFS is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_HPFS_FS is not set
-CONFIG_PROC_FS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX4FS_RW is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_EXT2_FS=m
-# CONFIG_SYSV_FS is not set
-# CONFIG_UDF_FS is not set
-# CONFIG_UDF_RW is not set
-# CONFIG_UFS_FS is not set
-# CONFIG_UFS_FS_WRITE is not set
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_TRACE is not set
-# CONFIG_XFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_ROOT_NFS is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_SUNRPC=m
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_SMB_FS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-# CONFIG_NCPFS_NLS is not set
-# CONFIG_NCPFS_EXTRAS is not set
-# CONFIG_ZISOFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SMB_NLS is not set
-CONFIG_NLS=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Multimedia devices
-#
-CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-CONFIG_VIDEO_PROC_FS=y
-# CONFIG_I2C_PARPORT is not set
-
-#
-# Video Adapters
-#
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIDEO_ZORAN_BUZ is not set
-# CONFIG_VIDEO_ZORAN_DC10 is not set
-# CONFIG_VIDEO_ZORAN_LML33 is not set
-# CONFIG_VIDEO_ZR36120 is not set
-# CONFIG_VIDEO_MEYE is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MIROPCM20 is not set
-# CONFIG_RADIO_MIROPCM20_RDS is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-# CONFIG_SOUND_ALI5455 is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_CMPCI is not set
-# CONFIG_SOUND_EMU10K1 is not set
-# CONFIG_MIDI_EMU10K1 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_ES1370 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ESSSOLO1 is not set
-# CONFIG_SOUND_MAESTRO is not set
-# CONFIG_SOUND_MAESTRO3 is not set
-# CONFIG_SOUND_FORTE is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_RME96XX is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-# CONFIG_MIDI_VIA82CXXX is not set
-# CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
-# CONFIG_SOUND_AD1980 is not set
-# CONFIG_SOUND_WM97XX is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_UHCI is not set
-CONFIG_USB_UHCI_ALT=m
-CONFIG_USB_OHCI=m
-# CONFIG_USB_SL811HS_ALT is not set
-# CONFIG_USB_SL811HS is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_AUDIO=m
-# CONFIG_USB_EMI26 is not set
-
-#
-# USB Bluetooth can only be used with disabled Bluetooth subsystem
-#
-# CONFIG_USB_MIDI is not set
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# USB Human Interface Devices (HID)
-#
-# CONFIG_USB_HID is not set
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-# CONFIG_USB_HIDINPUT is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_DC2XX is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_OV511 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDCETHER is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-CONFIG_USB_SERIAL_FTDI_SIO=m
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_MCT_U232=m
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-CONFIG_USB_SERIAL_PL2303=m
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_BRLVGER is not set
-# CONFIG_USB_LCD is not set
-
-#
-# Support for USB gadgets
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-CONFIG_BLUEZ=m
-CONFIG_BLUEZ_L2CAP=m
-CONFIG_BLUEZ_SCO=m
-CONFIG_BLUEZ_RFCOMM=m
-CONFIG_BLUEZ_RFCOMM_TTY=y
-CONFIG_BLUEZ_BNEP=m
-CONFIG_BLUEZ_BNEP_MC_FILTER=y
-CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BLUEZ_HCIUSB=m
-CONFIG_BLUEZ_HCIUSB_SCO=y
-CONFIG_BLUEZ_HCIUART=m
-CONFIG_BLUEZ_HCIUART_H4=y
-CONFIG_BLUEZ_HCIUART_BCSP=y
-CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
-# CONFIG_BLUEZ_HCIBFUSB is not set
-# CONFIG_BLUEZ_HCIDTL1 is not set
-# CONFIG_BLUEZ_HCIBT3C is not set
-# CONFIG_BLUEZ_HCIBLUECARD is not set
-# CONFIG_BLUEZ_HCIBTUART is not set
-# CONFIG_BLUEZ_HCIVHCI is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=0
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-# CONFIG_FW_LOADER is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+#
+CONFIG_X86=y
+# CONFIG_SBUS is not set
+CONFIG_UID16=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_KMOD is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M686 is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+# CONFIG_MELAN is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MGEODE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MVIAC3_2 is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_INVLPG=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_XADD=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_POPAD_OK=y
+# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_X86_L1_CACHE_SHIFT=4
+CONFIG_X86_USE_STRING_486=y
+CONFIG_X86_ALIGNMENT_16=y
+CONFIG_X86_PPRO_FENCE=y
+# CONFIG_X86_F00F_WORKS_OK is not set
+CONFIG_X86_MCE=y
+# CONFIG_TOSHIBA is not set
+# CONFIG_I8K is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_X86_MSR is not set
+# CONFIG_X86_CPUID is not set
+# CONFIG_EDD is not set
+CONFIG_NOHIGHMEM=y
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGHMEM is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_MTRR is not set
+# CONFIG_SMP is not set
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_UP_IOAPIC is not set
+# CONFIG_X86_TSC_DISABLE is not set
+
+#
+# General setup
+#
+CONFIG_NET=y
+CONFIG_PCI=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+CONFIG_PCI_GOANY=y
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_ISA=y
+# CONFIG_PCI_NAMES is not set
+# CONFIG_EISA is not set
+# CONFIG_MCA is not set
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
+CONFIG_PCMCIA=m
+CONFIG_CARDBUS=y
+# CONFIG_TCIC is not set
+# CONFIG_I82092 is not set
+# CONFIG_I82365 is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ is not set
+# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
+# CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+CONFIG_KCORE_ELF=y
+# CONFIG_KCORE_AOUT is not set
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_ELF_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_OOM_KILLER is not set
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# ACPI Support
+#
+# CONFIG_ACPI is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_GEN_PROBE is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_CFI_SSTSTD is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_AMDSTD is not set
+# CONFIG_MTD_SHARP is not set
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PNC2000 is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_NETSC520 is not set
+# CONFIG_MTD_SBC_GXX is not set
+# CONFIG_MTD_ELAN_104NC is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_MIXMEM is not set
+# CONFIG_MTD_OCTAGON is not set
+# CONFIG_MTD_VMAX is not set
+# CONFIG_MTD_SCx200_DOCFLASH is not set
+# CONFIG_MTD_L440GX is not set
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICH2ROM is not set
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_SCB2_FLASH is not set
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PCMCIA is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLKMTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC1000 is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOCPROBE is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play configuration
+#
+CONFIG_PNP=m
+CONFIG_ISAPNP=m
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
+# CONFIG_CISS_MONITOR_THREAD is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_STATS is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_MD_LINEAR is not set
+# CONFIG_MD_RAID0 is not set
+# CONFIG_MD_RAID1 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_BLK_DEV_LVM is not set
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_NETLINK_DEV=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_FILTER is not set
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_FWMARK=y
+CONFIG_IP_ROUTE_NAT=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_TOS=y
+# CONFIG_IP_ROUTE_VERBOSE is not set
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_FTP=y
+CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_IRC=y
+CONFIG_IP_NF_CT_PROTO_GRE=m
+CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=y
+CONFIG_IP_NF_MATCH_MULTIPORT=y
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_IPP2P=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=y
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=y
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_UNCLEAN=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_LAYER7=m
+# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set
+CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+CONFIG_IP_NF_TARGET_MIRROR=m
+CONFIG_IP_NF_NAT=y
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_PROTO_GRE=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=y
+CONFIG_IP_NF_NAT_FTP=y
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_MANGLE=y
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=y
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_LOG=y
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=y
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_IP_NF_SET=m
+CONFIG_IP_NF_SET_MAX=256
+CONFIG_IP_NF_SET_HASHSIZE=1024
+CONFIG_IP_NF_MATCH_SET=m
+CONFIG_IP_NF_TARGET_SET=m
+CONFIG_IP_NF_SET_IPMAP=m
+CONFIG_IP_NF_SET_PORTMAP=m
+CONFIG_IP_NF_SET_MACIPMAP=m
+CONFIG_IP_NF_SET_IPHASH=m
+CONFIG_IP_NF_SET_NETHASH=m
+CONFIG_IP_NF_SET_IPTREE=m
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_LIMIT=m
+CONFIG_IP6_NF_MATCH_MAC=m
+# CONFIG_IP6_NF_MATCH_RT is not set
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+CONFIG_IP6_NF_MATCH_MULTIPORT=m
+CONFIG_IP6_NF_MATCH_OWNER=m
+CONFIG_IP6_NF_MATCH_MARK=m
+# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_MARK=m
+# CONFIG_KHTTPD is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_VLAN_8021Q=y
+
+#
+#
+#
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_DECNET is not set
+CONFIG_BRIDGE=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_LLC is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_CSZ=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+# CONFIG_NET_SCH_NETEM is not set
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_IPSEC_NAT_TRAVERSAL=y
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+# CONFIG_PHONE_IXJ is not set
+# CONFIG_PHONE_IXJ_PCMCIA is not set
+
+#
+# ATA/IDE/MFM/RLL support
+#
+CONFIG_IDE=y
+
+#
+# IDE, ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_BLK_DEV_GENERIC is not set
+CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_BLK_DEV_OFFBOARD=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_PCI_WIP is not set
+# CONFIG_BLK_DEV_ADMA100 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_WDC_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_AMD74XX_OVERRIDE is not set
+# CONFIG_BLK_DEV_ATIIXP is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_HPT34X_AUTODMA is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_PDC202XX_BURST is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+CONFIG_BLK_DEV_SC1200=y
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_IDE_CHIPSETS is not set
+CONFIG_IDEDMA_AUTO=y
+CONFIG_IDEDMA_IVB=y
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
+# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
+# CONFIG_BLK_DEV_ATARAID_SII is not set
+
+#
+# SCSI support
+#
+CONFIG_SCSI=m
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_SD_EXTRA_DEVS=5
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_DEBUG_QUEUES is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AHA1740 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_AM53C974 is not set
+# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_MEGARAID2 is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_SATA_AHCI is not set
+# CONFIG_SCSI_SATA_SVW is not set
+# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_NV is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
+# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_SX4 is not set
+# CONFIG_SCSI_SATA_SIL is not set
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_ULI is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_DMA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_NCR53C7xx is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_NCR53C8XX is not set
+# CONFIG_SCSI_SYM53C8XX is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_PSI240I is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_SEAGATE is not set
+# CONFIG_SCSI_SIM710 is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_ULTRASTOR is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_SCSI_PCMCIA is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
+#
+# IEEE 1394 (FireWire) support (EXPERIMENTAL)
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+CONFIG_NET_RANDOM=y
+# CONFIG_ETHERTAP is not set
+# CONFIG_NET_SB1000 is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_SUNLANCE is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNBMAC is not set
+# CONFIG_SUNQE is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_LANCE is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_TULIP is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_DGRS is not set
+# CONFIG_DM9102 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_EEPRO100_PIO is not set
+# CONFIG_E100 is not set
+# CONFIG_LNE390 is not set
+# CONFIG_FEALNX is not set
+CONFIG_NATSEMI=m
+# CONFIG_NE2K_PCI is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_NE3210 is not set
+# CONFIG_ES3210 is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+# CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_SUNDANCE_MMIO is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_NET_POCKET is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE_MPPC=m
+CONFIG_PPPOE=m
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_STRIP is not set
+# CONFIG_WAVELAN is not set
+# CONFIG_ARLAN is not set
+# CONFIG_AIRONET4500 is not set
+# CONFIG_AIRONET4500_NONCS is not set
+# CONFIG_AIRONET4500_PROC is not set
+# CONFIG_AIRO is not set
+# CONFIG_HERMES is not set
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_PCI_HERMES is not set
+
+#
+# Wireless Pcmcia cards support
+#
+# CONFIG_PCMCIA_HERMES is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_ATMEL is not set
+
+#
+# Prism54 PCI/PCMCIA GT/Duette Driver - 802.11(a/b/g)
+#
+# CONFIG_PRISM54 is not set
+CONFIG_NET_WIRELESS=y
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_RCPCI is not set
+CONFIG_SHAPER=m
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# PCMCIA network device support
+#
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_ARCNET_COM20020_CS is not set
+# CONFIG_PCMCIA_IBMTR is not set
+# CONFIG_PCMCIA_XIRCOM is not set
+# CONFIG_PCMCIA_XIRTULIP is not set
+# CONFIG_NET_PCMCIA_RADIO is not set
+
+#
+# Amateur Radio support
+#
+CONFIG_HAMRADIO=y
+CONFIG_AX25=m
+# CONFIG_AX25_DAMA_SLAVE is not set
+# CONFIG_NETROM is not set
+# CONFIG_ROSE is not set
+
+#
+# AX.25 network device drivers
+#
+CONFIG_MKISS=m
+# CONFIG_6PACK is not set
+# CONFIG_BPQETHER is not set
+# CONFIG_DMASCC is not set
+# CONFIG_SCC is not set
+# CONFIG_BAYCOM_SER_FDX is not set
+# CONFIG_BAYCOM_SER_HDX is not set
+# CONFIG_BAYCOM_PAR is not set
+# CONFIG_BAYCOM_EPP is not set
+# CONFIG_SOUNDMODEM is not set
+# CONFIG_YAM is not set
+
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Input core support
+#
+# CONFIG_INPUT is not set
+# CONFIG_INPUT_KEYBDEV is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+# CONFIG_SERIAL_EXTENDED is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=128
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_MOUSE is not set
+
+#
+# Joysticks
+#
+# CONFIG_INPUT_GAMEPORT is not set
+
+#
+# Input core support is needed for gameports
+#
+
+#
+# Input core support is needed for joysticks
+#
+# CONFIG_QIC02_TAPE is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_IPMI_PANIC_EVENT is not set
+# CONFIG_IPMI_DEVICE_INTERFACE is not set
+# CONFIG_IPMI_KCS is not set
+# CONFIG_IPMI_WATCHDOG is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_WAFER_WDT is not set
+# CONFIG_I810_TCO is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_60XX_WDT is not set
+CONFIG_SC1200_WDT=m
+CONFIG_SCx200_WDT=m
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_W83877F_WDT is not set
+# CONFIG_WDT is not set
+# CONFIG_WDTPCI is not set
+# CONFIG_MACHZ_WDT is not set
+CONFIG_WD1100=m
+CONFIG_SCx200=m
+CONFIG_SCx200_GPIO=m
+# CONFIG_AMD_RNG is not set
+# CONFIG_INTEL_RNG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_AMD_PM768 is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_SONYPI is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+# CONFIG_AGP is not set
+
+#
+# Direct Rendering Manager (XFree86 DRI support)
+#
+# CONFIG_DRM is not set
+# CONFIG_MWAVE is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_PCMCIA_SERIAL_CS is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_MWAVE is not set
+# CONFIG_OBMOUSE is not set
+
+#
+# File systems
+#
+# CONFIG_QUOTA is not set
+# CONFIG_QFMT_V2 is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_ADFS_FS is not set
+# CONFIG_ADFS_FS_RW is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BEFS_DEBUG is not set
+# CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+# CONFIG_UMSDOS_FS is not set
+CONFIG_VFAT_FS=m
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+# CONFIG_JFFS2_BBC_ARMLIB is not set
+# CONFIG_JFFS2_BBC_LZO is not set
+CONFIG_JFFS2_BBC_LZARI=y
+# CONFIG_JFFS2_BBC_LZHD is not set
+# CONFIG_JFFS2_BBC_LZSS is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_TMPFS=y
+CONFIG_RAMFS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_NTFS_FS is not set
+# CONFIG_NTFS_RW is not set
+# CONFIG_HPFS_FS is not set
+CONFIG_PROC_FS=y
+CONFIG_DEVFS_FS=y
+CONFIG_DEVFS_MOUNT=y
+# CONFIG_DEVFS_DEBUG is not set
+CONFIG_DEVPTS_FS=y
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_QNX4FS_RW is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_EXT2_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UDF_FS is not set
+# CONFIG_UDF_RW is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_UFS_FS_WRITE is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_TRACE is not set
+# CONFIG_XFS_DEBUG is not set
+
+#
+# Network File Systems
+#
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_ROOT_NFS is not set
+# CONFIG_NFSD is not set
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_SUNRPC=m
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_POSIX=y
+# CONFIG_SMB_FS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_NCPFS_PACKET_SIGNING is not set
+# CONFIG_NCPFS_IOCTL_LOCKING is not set
+# CONFIG_NCPFS_STRONG is not set
+# CONFIG_NCPFS_NFS_NS is not set
+# CONFIG_NCPFS_OS2_NS is not set
+# CONFIG_NCPFS_SMALLDOS is not set
+# CONFIG_NCPFS_NLS is not set
+# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SMB_NLS is not set
+CONFIG_NLS=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+CONFIG_VIDEO_PROC_FS=y
+# CONFIG_I2C_PARPORT is not set
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_BT848 is not set
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_ZORAN_BUZ is not set
+# CONFIG_VIDEO_ZORAN_DC10 is not set
+# CONFIG_VIDEO_ZORAN_LML33 is not set
+# CONFIG_VIDEO_ZR36120 is not set
+# CONFIG_VIDEO_MEYE is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_MIROPCM20 is not set
+# CONFIG_RADIO_MIROPCM20_RDS is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+# CONFIG_SOUND_ALI5455 is not set
+# CONFIG_SOUND_BT878 is not set
+# CONFIG_SOUND_CMPCI is not set
+# CONFIG_SOUND_EMU10K1 is not set
+# CONFIG_MIDI_EMU10K1 is not set
+# CONFIG_SOUND_FUSION is not set
+# CONFIG_SOUND_CS4281 is not set
+# CONFIG_SOUND_ES1370 is not set
+# CONFIG_SOUND_ES1371 is not set
+# CONFIG_SOUND_ESSSOLO1 is not set
+# CONFIG_SOUND_MAESTRO is not set
+# CONFIG_SOUND_MAESTRO3 is not set
+# CONFIG_SOUND_FORTE is not set
+# CONFIG_SOUND_ICH is not set
+# CONFIG_SOUND_RME96XX is not set
+# CONFIG_SOUND_SONICVIBES is not set
+# CONFIG_SOUND_TRIDENT is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+# CONFIG_SOUND_VIA82CXXX is not set
+# CONFIG_MIDI_VIA82CXXX is not set
+# CONFIG_SOUND_OSS is not set
+# CONFIG_SOUND_TVMIXER is not set
+# CONFIG_SOUND_AD1980 is not set
+# CONFIG_SOUND_WM97XX is not set
+
+#
+# USB support
+#
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_UHCI is not set
+CONFIG_USB_UHCI_ALT=m
+CONFIG_USB_OHCI=m
+# CONFIG_USB_SL811HS_ALT is not set
+# CONFIG_USB_SL811HS is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_AUDIO=m
+# CONFIG_USB_EMI26 is not set
+
+#
+# USB Bluetooth can only be used with disabled Bluetooth subsystem
+#
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# USB Human Interface Devices (HID)
+#
+# CONFIG_USB_HID is not set
+
+#
+# Input core support is needed for USB HID input layer or HIDBP support
+#
+# CONFIG_USB_HIDINPUT is not set
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_DC2XX is not set
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_SCANNER is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+CONFIG_USB_PWC=m
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_W9968CF is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# USB Network adaptors
+#
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_USS720 is not set
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_BRLVGER is not set
+# CONFIG_USB_LCD is not set
+
+#
+# Support for USB gadgets
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Bluetooth support
+#
+CONFIG_BLUEZ=m
+CONFIG_BLUEZ_L2CAP=m
+CONFIG_BLUEZ_SCO=m
+CONFIG_BLUEZ_RFCOMM=m
+CONFIG_BLUEZ_RFCOMM_TTY=y
+CONFIG_BLUEZ_BNEP=m
+CONFIG_BLUEZ_BNEP_MC_FILTER=y
+CONFIG_BLUEZ_BNEP_PROTO_FILTER=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BLUEZ_HCIUSB=m
+CONFIG_BLUEZ_HCIUSB_SCO=y
+CONFIG_BLUEZ_HCIUART=m
+CONFIG_BLUEZ_HCIUART_H4=y
+CONFIG_BLUEZ_HCIUART_BCSP=y
+CONFIG_BLUEZ_HCIUART_BCSP_TXCRC=y
+# CONFIG_BLUEZ_HCIBFUSB is not set
+# CONFIG_BLUEZ_HCIDTL1 is not set
+# CONFIG_BLUEZ_HCIBT3C is not set
+# CONFIG_BLUEZ_HCIBLUECARD is not set
+# CONFIG_BLUEZ_HCIBTUART is not set
+# CONFIG_BLUEZ_HCIVHCI is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=0
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+# CONFIG_FW_LOADER is not set
+++ /dev/null
-diff -Nur linux-2.4.29/arch/i386/Makefile linux-2.4.29_geode/arch/i386/Makefile
---- linux-2.4.29/arch/i386/Makefile Wed Nov 17 12:54:21 2004
-+++ linux-2.4.29_geode/arch/i386/Makefile Tue Feb 15 23:41:54 2005
-@@ -94,6 +94,10 @@
- CFLAGS += $(call check_gcc,-march=c3-2,-march=i686)
- endif
-
-+ifdef CONFIG_MGEODE
-+CFLAGS += -march=i586
-+endif
-+
- # Disable unit-at-a-time mode, it makes gcc use a lot more stack
- # due to the lack of sharing of stacklots.
- CFLAGS += $(call check_gcc,-fno-unit-at-a-time,)
-diff -Nur linux-2.4.29/arch/i386/config.in linux-2.4.29_geode/arch/i386/config.in
---- linux-2.4.29/arch/i386/config.in Wed Nov 17 12:54:21 2004
-+++ linux-2.4.29_geode/arch/i386/config.in Tue Feb 15 23:41:54 2005
-@@ -42,6 +42,7 @@
- Winchip-C6 CONFIG_MWINCHIPC6 \
- Winchip-2 CONFIG_MWINCHIP2 \
- Winchip-2A/Winchip-3 CONFIG_MWINCHIP3D \
-+ MediaGX/Geode CONFIG_MGEODE \
- CyrixIII/VIA-C3 CONFIG_MCYRIXIII \
- VIA-C3-2 CONFIG_MVIAC3_2" Pentium-Pro
- #
-@@ -162,6 +163,14 @@
- define_bool CONFIG_X86_ALIGNMENT_16 y
- define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
- define_bool CONFIG_X86_F00F_WORKS_OK y
-+fi
-+if [ "$CONFIG_MGEODE" = "y" ]; then
-+ define_int CONFIG_X86_L1_CACHE_SHIFT 5
-+ define_bool CONFIG_X86_USE_STRING_486 y
-+ define_bool CONFIG_X86_ALIGNMENT_16 y
-+ define_bool CONFIG_X86_TSC y
-+ define_bool CONFIG_X86_PPRO_FENCE y
-+ define_bool CONFIG_X86_OOSTORE y
- fi
- if [ "$CONFIG_MCRUSOE" = "y" ]; then
- define_int CONFIG_X86_L1_CACHE_SHIFT 5
+++ /dev/null
-diff -Nur linux-2.4.29/drivers/char/Config.in linux-2.4.29_geode/drivers/char/Config.in
---- linux-2.4.29/drivers/char/Config.in Sun Aug 8 01:26:04 2004
-+++ linux-2.4.29_geode/drivers/char/Config.in Tue Feb 15 23:41:54 2005
-@@ -270,6 +270,7 @@
- fi
- fi
- tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT
-+ tristate ' Embedded NatSemi SC1x00 Watchdog' CONFIG_WD1100
- if [ "$CONFIG_SGI_IP22" = "y" ]; then
- dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
- fi
-diff -Nur linux-2.4.29/drivers/char/Makefile linux-2.4.29_geode/drivers/char/Makefile
---- linux-2.4.29/drivers/char/Makefile Sun Aug 8 01:26:04 2004
-+++ linux-2.4.29_geode/drivers/char/Makefile Tue Feb 15 23:41:54 2005
-@@ -302,6 +302,7 @@
- obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
- obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
- obj-$(CONFIG_IB700_WDT) += ib700wdt.o
-+obj-$(CONFIG_WD1100) += wd1100.o
- obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
- obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
- obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
-diff -Nur linux-2.4.29/drivers/char/wd1100.c linux-2.4.29_geode/drivers/char/wd1100.c
---- linux-2.4.29/drivers/char/wd1100.c Thu Jan 1 01:00:00 1970
-+++ linux-2.4.29_geode/drivers/char/wd1100.c Tue Feb 15 23:41:54 2005
-@@ -0,0 +1,391 @@
-+/*
-+ * National Semiconductor SC1x00 CPU watchdog driver
-+ * Copyright (c) Inprimis Technologies 2002
-+ *
-+ * by Mark Grosberg <markg@inprimis.com>
-+ * and Rolando Goldman <rolandog@inprimis.com>
-+ *
-+ * Minor changes by Kianusch Sayah Karadji <kianusch@sk-tech.net>
-+ * ( Soekris net4801 Support, module-parameter )
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <linux/fs.h>
-+#include <linux/mm.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+#include <linux/spinlock.h>
-+#include <linux/sysctl.h>
-+#include <linux/pci.h>
-+
-+/*
-+ * Since the SC1100 is an x86 clone, we don't even bother with
-+ * allowing other architectures to compile us.
-+ */
-+#ifndef CONFIG_X86
-+# error Sorry this driver is only for x86.
-+#endif
-+
-+#include <asm/system.h>
-+#include <asm/io.h>
-+#include <asm/uaccess.h>
-+#include <asm/processor.h>
-+
-+/* #define DEBUG_WD1100 */
-+
-+static int proc_wd_timeout(ctl_table *ctl,
-+ int write,
-+ struct file *file,
-+ void *buffer,
-+ size_t *lenp);
-+static int proc_wd_graceful(ctl_table *ctl,
-+ int write,
-+ struct file *file,
-+ void *buffer,
-+ size_t *lenp);
-+
-+/* Register definitions */
-+
-+#define SC1100_F5_VENDOR_ID 0x100B
-+#define SC1100_F5_DEVICE_ID 0x0515
-+
-+#define CPU_WDTO_REG 0x00 /* watchdog time out, 16 bit register */
-+#define CPU_WDCNFG_REG 0x02 /* watchdog config , 16 bit register */
-+#define CPU_WDSTS_REG 0x04 /* watchdog status , 8 bit register */
-+
-+/* Default timeout: 4 seconds (changeable via sysctl) */
-+static unsigned int sysctl_wd_timeout = 0;
-+static unsigned int sysctl_wd_graceful = 0;
-+
-+static unsigned int timeout = 4;
-+static unsigned int graceful = 1;
-+
-+MODULE_PARM (timeout, "i");
-+MODULE_PARM (graceful, "i");
-+
-+static int in_use = 0;
-+static unsigned short cpu_base;
-+static spinlock_t wd_lock;
-+
-+/**************************************************************************/
-+
-+/* XXX To-do: DEV_WATCHDOG must be in include/linux/sysctl.h */
-+enum
-+{ DEV_WATCHDOG = 6 };
-+
-+enum
-+{
-+ DEV_WD_TIMEOUT = 1,
-+ DEV_WD_GRACEFUL = 2
-+};
-+
-+static struct ctl_table_header *wd_table_header;
-+
-+static ctl_table wd_table[] = {
-+ {
-+ DEV_WD_TIMEOUT, "timeout",
-+ &sysctl_wd_timeout, sizeof(int), 0644, NULL, &proc_wd_timeout
-+ },
-+
-+ {
-+ DEV_WD_GRACEFUL, "graceful",
-+ &sysctl_wd_graceful, sizeof(int), 0644, NULL, &proc_wd_graceful
-+ },
-+
-+ {0}
-+};
-+
-+static ctl_table wd_dir_table[] = {
-+ {DEV_WATCHDOG, "wd", NULL, 0, 0555, wd_table},
-+ {0}
-+};
-+
-+static ctl_table wd_root_table[] = {
-+ {CTL_DEV, "dev", NULL, 0, 0555, wd_dir_table},
-+ {0}
-+};
-+
-+static int proc_wd_timeout(ctl_table *ctl,
-+ int write,
-+ struct file *file,
-+ void *buffer,
-+ size_t *lenp)
-+{
-+ int rc;
-+
-+ rc = proc_dointvec(ctl, write, file, buffer, lenp);
-+ if (write && (rc == 0))
-+ {
-+ /* Clamp to limits. */
-+ if (sysctl_wd_timeout < 1)
-+ sysctl_wd_timeout = 1;
-+ else if (sysctl_wd_timeout > 65535)
-+ sysctl_wd_timeout = 65535;
-+ }
-+
-+ return (rc);
-+}
-+
-+static int proc_wd_graceful(ctl_table *ctl,
-+ int write,
-+ struct file *file,
-+ void *buffer,
-+ size_t *lenp)
-+{
-+ int rc;
-+
-+ rc = proc_dointvec(ctl, write, file, buffer, lenp);
-+ if (write && (rc == 0))
-+ {
-+ /* Clamp to true/false. */
-+ if (sysctl_wd_graceful)
-+ sysctl_wd_graceful = 1;
-+ }
-+
-+ return (rc);
-+}
-+
-+/**************************************************************************/
-+
-+static __inline__ void reset_wd(void)
-+{
-+ outw(sysctl_wd_timeout * 8, cpu_base + CPU_WDTO_REG);
-+}
-+
-+static int reboot_reason(void)
-+{
-+ static int result;
-+ static int fetched = 0;
-+
-+ if (!fetched)
-+ {
-+ unsigned char sr;
-+
-+ sr = inb(cpu_base + CPU_WDSTS_REG);
-+ outb(sr | 1, cpu_base + CPU_WDSTS_REG);
-+
-+ fetched = 1;
-+ }
-+
-+ return (result);
-+}
-+
-+static struct watchdog_info wd_info =
-+{
-+ 0, /* Options */
-+ 0, /* Firmware version */
-+ "NSC SC1x00 WD"
-+};
-+
-+static int wd_ioctl(struct inode *inode,
-+ struct file *file,
-+ unsigned int cmd,
-+ unsigned long arg)
-+{
-+ int i;
-+
-+ switch (cmd)
-+ {
-+ default:
-+ return (-ENOTTY);
-+
-+ case WDIOC_GETSUPPORT:
-+ i = verify_area(VERIFY_WRITE, (void *)arg, sizeof(struct watchdog_info));
-+ if (i)
-+ return (i);
-+ else
-+ return copy_to_user((struct watchdog_info *)arg,
-+ &wd_info,
-+ sizeof(wd_info));
-+ break;
-+
-+ case WDIOC_KEEPALIVE:
-+ reset_wd();
-+ return (0);
-+
-+ case WDIOC_GETBOOTSTATUS:
-+ i = reboot_reason();
-+ return (put_user(i, (int *)arg));
-+
-+ case WDIOC_GETSTATUS:
-+ i = inw(cpu_base + CPU_WDTO_REG) / 8;
-+ return (put_user(i, (int *)arg));
-+ }
-+}
-+
-+static int wd_open(struct inode *inode,
-+ struct file *file)
-+{
-+ spin_lock(&wd_lock);
-+ if (in_use)
-+ {
-+ spin_unlock(&wd_lock);
-+ return (-EBUSY);
-+ }
-+ else
-+ in_use++;
-+
-+ spin_unlock(&wd_lock);
-+
-+ MOD_INC_USE_COUNT;
-+
-+ /*
-+ * Configure the chip to do a reset if the timer goes to 0.
-+ * Set the clock divisor to 4096.
-+ */
-+
-+ outw(0xfc, cpu_base + CPU_WDCNFG_REG);
-+
-+ /* Start the watchdog: It won't run until we write the TO reg. */
-+ reset_wd();
-+
-+ return (0);
-+}
-+
-+static int wd_release(struct inode *inode,
-+ struct file *file)
-+{
-+ spin_lock(&wd_lock);
-+
-+ in_use = 0;
-+
-+ /*
-+ * If graceful shutdown is not set, then don't bother to stop the
-+ * watchdog timer. This handles the scenario where the user process
-+ * that is poking the watchdog gets terminated due to some error
-+ * (say a SEGV or some VM condition).
-+ *
-+ * In that case, the kernel would happily close the descriptor for
-+ * us and leave us in a state where we aren't watching the dog...
-+ *
-+ * To work around this, the "graceful" sysctl prevents reset of the
-+ * watchdog on close.
-+ */
-+ if (sysctl_wd_graceful)
-+ outw(0, cpu_base + CPU_WDCNFG_REG);
-+
-+ spin_unlock(&wd_lock);
-+ MOD_DEC_USE_COUNT;
-+
-+ return (0);
-+}
-+
-+static ssize_t wd_write(struct file *file,
-+ const char *data,
-+ size_t len,
-+ loff_t *ppos)
-+{
-+ /* Device is non-seekable. */
-+ if (ppos != &file->f_pos)
-+ return (-ESPIPE);
-+
-+ if (len > 0)
-+ reset_wd();
-+
-+ return (len);
-+}
-+
-+static struct file_operations wd_fops=
-+{
-+ owner: THIS_MODULE,
-+ write: wd_write,
-+ ioctl: wd_ioctl,
-+ open: wd_open,
-+ release: wd_release,
-+};
-+
-+static struct miscdevice sc1x00wd_miscdev=
-+{
-+ WATCHDOG_MINOR,
-+ "watchdog",
-+ &wd_fops
-+};
-+
-+static int __init wd_init(void)
-+{
-+ int ret;
-+ struct pci_dev *dev;
-+ unsigned int cw;
-+
-+ if (timeout < 1)
-+ timeout = 1;
-+ else if (timeout > 65535)
-+ timeout = 65535;
-+
-+ if (graceful != 0)
-+ graceful = 1;
-+
-+ sysctl_wd_timeout=timeout;
-+ sysctl_wd_graceful=graceful;
-+
-+ if ((strcmp(boot_cpu_data.x86_vendor_id, "Geode by NSC") != 0)
-+ || ((boot_cpu_data.x86_model != 4) && boot_cpu_data.x86_model != 9))
-+ {
-+ printk(KERN_WARNING "wd1100.c: This is not an SC1100 processor!\n");
-+ return (0);
-+ }
-+
-+ /* get the CONFIG BLOCK ADDRESS from scratch pad register */
-+ dev = pci_find_device(SC1100_F5_VENDOR_ID,SC1100_F5_DEVICE_ID,0);
-+ if (dev == NULL)
-+ {
-+ printk(KERN_ERR "wd1100.c: Can not find bridge device.\n");
-+ return (0);
-+ }
-+
-+ pci_read_config_dword(dev, 0x64, &cw);
-+ cpu_base = (unsigned short )cw;
-+
-+#ifdef DEBUG_WD1100
-+ printk("wd1100.c: CPU base = 0x%X\n", (unsigned int )cpu_base);
-+#endif
-+
-+ printk(KERN_INFO "SC1x00 Watchdog driver by Inprimis Technolgies.\n");
-+ /*
-+ * We must call reboot_reason() to reset the flag in the WD.
-+ *
-+ * Even though it is available as an ioctl(), we call it during
-+ * module initialization to perform the clear. You can take out
-+ * the printk(), but don't take out the call to reboot_reason().
-+ */
-+ if (reboot_reason())
-+ printk(KERN_INFO "Last reboot was by watchdog!\n");
-+
-+ spin_lock_init(&wd_lock);
-+
-+ ret = misc_register(&sc1x00wd_miscdev);
-+ if (ret)
-+ printk(KERN_ERR "wd1100.c: Can't register device.\n");
-+ else
-+ {
-+ wd_table_header = register_sysctl_table(wd_root_table, 1);
-+ if (wd_table_header == NULL)
-+ printk(KERN_ERR "wd1100.c: Can't register sysctl.\n");
-+ }
-+
-+ return 0;
-+}
-+
-+static void __exit wd_exit(void)
-+{
-+ if (wd_table_header != NULL)
-+ unregister_sysctl_table(wd_table_header);
-+
-+ misc_deregister(&sc1x00wd_miscdev);
-+}
-+
-+EXPORT_NO_SYMBOLS;
-+
-+module_init(wd_init);
-+module_exit(wd_exit);
-+
-+MODULE_LICENSE("GPL");
-+
+++ /dev/null
-diff -Nur linux-2.4.29/drivers/pci/pci.c linux-2.4.29_geode/drivers/pci/pci.c
---- linux-2.4.29/drivers/pci/pci.c Wed Nov 17 12:54:21 2004
-+++ linux-2.4.29_geode/drivers/pci/pci.c Tue Feb 15 23:41:54 2005
-@@ -1486,6 +1486,10 @@
- for (func = 0; func < 8; func++, temp->devfn++) {
- if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type))
- continue;
-+#ifdef CONFIG_MGEODE
-+ if (hdr_type & 0x7f > PCI_HEADER_TYPE_CARDBUS)
-+ continue;
-+#endif
- temp->hdr_type = hdr_type & 0x7f;
-
- dev = pci_scan_device(temp);
--- /dev/null
+diff -Nur linux-2.4.29/arch/i386/Makefile linux-2.4.29_geode/arch/i386/Makefile
+--- linux-2.4.29/arch/i386/Makefile Wed Nov 17 12:54:21 2004
++++ linux-2.4.29_geode/arch/i386/Makefile Tue Feb 15 23:41:54 2005
+@@ -94,6 +94,10 @@
+ CFLAGS += $(call check_gcc,-march=c3-2,-march=i686)
+ endif
+
++ifdef CONFIG_MGEODE
++CFLAGS += -march=i586
++endif
++
+ # Disable unit-at-a-time mode, it makes gcc use a lot more stack
+ # due to the lack of sharing of stacklots.
+ CFLAGS += $(call check_gcc,-fno-unit-at-a-time,)
+diff -Nur linux-2.4.29/arch/i386/config.in linux-2.4.29_geode/arch/i386/config.in
+--- linux-2.4.29/arch/i386/config.in Wed Nov 17 12:54:21 2004
++++ linux-2.4.29_geode/arch/i386/config.in Tue Feb 15 23:41:54 2005
+@@ -42,6 +42,7 @@
+ Winchip-C6 CONFIG_MWINCHIPC6 \
+ Winchip-2 CONFIG_MWINCHIP2 \
+ Winchip-2A/Winchip-3 CONFIG_MWINCHIP3D \
++ MediaGX/Geode CONFIG_MGEODE \
+ CyrixIII/VIA-C3 CONFIG_MCYRIXIII \
+ VIA-C3-2 CONFIG_MVIAC3_2" Pentium-Pro
+ #
+@@ -162,6 +163,14 @@
+ define_bool CONFIG_X86_ALIGNMENT_16 y
+ define_bool CONFIG_X86_USE_PPRO_CHECKSUM y
+ define_bool CONFIG_X86_F00F_WORKS_OK y
++fi
++if [ "$CONFIG_MGEODE" = "y" ]; then
++ define_int CONFIG_X86_L1_CACHE_SHIFT 5
++ define_bool CONFIG_X86_USE_STRING_486 y
++ define_bool CONFIG_X86_ALIGNMENT_16 y
++ define_bool CONFIG_X86_TSC y
++ define_bool CONFIG_X86_PPRO_FENCE y
++ define_bool CONFIG_X86_OOSTORE y
+ fi
+ if [ "$CONFIG_MCRUSOE" = "y" ]; then
+ define_int CONFIG_X86_L1_CACHE_SHIFT 5
--- /dev/null
+diff -Nur linux-2.4.29/drivers/char/Config.in linux-2.4.29_geode/drivers/char/Config.in
+--- linux-2.4.29/drivers/char/Config.in Sun Aug 8 01:26:04 2004
++++ linux-2.4.29_geode/drivers/char/Config.in Tue Feb 15 23:41:54 2005
+@@ -270,6 +270,7 @@
+ fi
+ fi
+ tristate ' ZF MachZ Watchdog' CONFIG_MACHZ_WDT
++ tristate ' Embedded NatSemi SC1x00 Watchdog' CONFIG_WD1100
+ if [ "$CONFIG_SGI_IP22" = "y" ]; then
+ dep_tristate ' Indy/I2 Hardware Watchdog' CONFIG_INDYDOG $CONFIG_SGI_IP22
+ fi
+diff -Nur linux-2.4.29/drivers/char/Makefile linux-2.4.29_geode/drivers/char/Makefile
+--- linux-2.4.29/drivers/char/Makefile Sun Aug 8 01:26:04 2004
++++ linux-2.4.29_geode/drivers/char/Makefile Tue Feb 15 23:41:54 2005
+@@ -302,6 +302,7 @@
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+ obj-$(CONFIG_IB700_WDT) += ib700wdt.o
++obj-$(CONFIG_WD1100) += wd1100.o
+ obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
+ obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
+ obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
+diff -Nur linux-2.4.29/drivers/char/wd1100.c linux-2.4.29_geode/drivers/char/wd1100.c
+--- linux-2.4.29/drivers/char/wd1100.c Thu Jan 1 01:00:00 1970
++++ linux-2.4.29_geode/drivers/char/wd1100.c Tue Feb 15 23:41:54 2005
+@@ -0,0 +1,391 @@
++/*
++ * National Semiconductor SC1x00 CPU watchdog driver
++ * Copyright (c) Inprimis Technologies 2002
++ *
++ * by Mark Grosberg <markg@inprimis.com>
++ * and Rolando Goldman <rolandog@inprimis.com>
++ *
++ * Minor changes by Kianusch Sayah Karadji <kianusch@sk-tech.net>
++ * ( Soekris net4801 Support, module-parameter )
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ */
++
++#include <linux/module.h>
++#include <linux/types.h>
++#include <linux/kernel.h>
++#include <linux/fs.h>
++#include <linux/mm.h>
++#include <linux/miscdevice.h>
++#include <linux/watchdog.h>
++#include <linux/spinlock.h>
++#include <linux/sysctl.h>
++#include <linux/pci.h>
++
++/*
++ * Since the SC1100 is an x86 clone, we don't even bother with
++ * allowing other architectures to compile us.
++ */
++#ifndef CONFIG_X86
++# error Sorry this driver is only for x86.
++#endif
++
++#include <asm/system.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++#include <asm/processor.h>
++
++/* #define DEBUG_WD1100 */
++
++static int proc_wd_timeout(ctl_table *ctl,
++ int write,
++ struct file *file,
++ void *buffer,
++ size_t *lenp);
++static int proc_wd_graceful(ctl_table *ctl,
++ int write,
++ struct file *file,
++ void *buffer,
++ size_t *lenp);
++
++/* Register definitions */
++
++#define SC1100_F5_VENDOR_ID 0x100B
++#define SC1100_F5_DEVICE_ID 0x0515
++
++#define CPU_WDTO_REG 0x00 /* watchdog time out, 16 bit register */
++#define CPU_WDCNFG_REG 0x02 /* watchdog config , 16 bit register */
++#define CPU_WDSTS_REG 0x04 /* watchdog status , 8 bit register */
++
++/* Default timeout: 4 seconds (changeable via sysctl) */
++static unsigned int sysctl_wd_timeout = 0;
++static unsigned int sysctl_wd_graceful = 0;
++
++static unsigned int timeout = 4;
++static unsigned int graceful = 1;
++
++MODULE_PARM (timeout, "i");
++MODULE_PARM (graceful, "i");
++
++static int in_use = 0;
++static unsigned short cpu_base;
++static spinlock_t wd_lock;
++
++/**************************************************************************/
++
++/* XXX To-do: DEV_WATCHDOG must be in include/linux/sysctl.h */
++enum
++{ DEV_WATCHDOG = 6 };
++
++enum
++{
++ DEV_WD_TIMEOUT = 1,
++ DEV_WD_GRACEFUL = 2
++};
++
++static struct ctl_table_header *wd_table_header;
++
++static ctl_table wd_table[] = {
++ {
++ DEV_WD_TIMEOUT, "timeout",
++ &sysctl_wd_timeout, sizeof(int), 0644, NULL, &proc_wd_timeout
++ },
++
++ {
++ DEV_WD_GRACEFUL, "graceful",
++ &sysctl_wd_graceful, sizeof(int), 0644, NULL, &proc_wd_graceful
++ },
++
++ {0}
++};
++
++static ctl_table wd_dir_table[] = {
++ {DEV_WATCHDOG, "wd", NULL, 0, 0555, wd_table},
++ {0}
++};
++
++static ctl_table wd_root_table[] = {
++ {CTL_DEV, "dev", NULL, 0, 0555, wd_dir_table},
++ {0}
++};
++
++static int proc_wd_timeout(ctl_table *ctl,
++ int write,
++ struct file *file,
++ void *buffer,
++ size_t *lenp)
++{
++ int rc;
++
++ rc = proc_dointvec(ctl, write, file, buffer, lenp);
++ if (write && (rc == 0))
++ {
++ /* Clamp to limits. */
++ if (sysctl_wd_timeout < 1)
++ sysctl_wd_timeout = 1;
++ else if (sysctl_wd_timeout > 65535)
++ sysctl_wd_timeout = 65535;
++ }
++
++ return (rc);
++}
++
++static int proc_wd_graceful(ctl_table *ctl,
++ int write,
++ struct file *file,
++ void *buffer,
++ size_t *lenp)
++{
++ int rc;
++
++ rc = proc_dointvec(ctl, write, file, buffer, lenp);
++ if (write && (rc == 0))
++ {
++ /* Clamp to true/false. */
++ if (sysctl_wd_graceful)
++ sysctl_wd_graceful = 1;
++ }
++
++ return (rc);
++}
++
++/**************************************************************************/
++
++static __inline__ void reset_wd(void)
++{
++ outw(sysctl_wd_timeout * 8, cpu_base + CPU_WDTO_REG);
++}
++
++static int reboot_reason(void)
++{
++ static int result;
++ static int fetched = 0;
++
++ if (!fetched)
++ {
++ unsigned char sr;
++
++ sr = inb(cpu_base + CPU_WDSTS_REG);
++ outb(sr | 1, cpu_base + CPU_WDSTS_REG);
++
++ fetched = 1;
++ }
++
++ return (result);
++}
++
++static struct watchdog_info wd_info =
++{
++ 0, /* Options */
++ 0, /* Firmware version */
++ "NSC SC1x00 WD"
++};
++
++static int wd_ioctl(struct inode *inode,
++ struct file *file,
++ unsigned int cmd,
++ unsigned long arg)
++{
++ int i;
++
++ switch (cmd)
++ {
++ default:
++ return (-ENOTTY);
++
++ case WDIOC_GETSUPPORT:
++ i = verify_area(VERIFY_WRITE, (void *)arg, sizeof(struct watchdog_info));
++ if (i)
++ return (i);
++ else
++ return copy_to_user((struct watchdog_info *)arg,
++ &wd_info,
++ sizeof(wd_info));
++ break;
++
++ case WDIOC_KEEPALIVE:
++ reset_wd();
++ return (0);
++
++ case WDIOC_GETBOOTSTATUS:
++ i = reboot_reason();
++ return (put_user(i, (int *)arg));
++
++ case WDIOC_GETSTATUS:
++ i = inw(cpu_base + CPU_WDTO_REG) / 8;
++ return (put_user(i, (int *)arg));
++ }
++}
++
++static int wd_open(struct inode *inode,
++ struct file *file)
++{
++ spin_lock(&wd_lock);
++ if (in_use)
++ {
++ spin_unlock(&wd_lock);
++ return (-EBUSY);
++ }
++ else
++ in_use++;
++
++ spin_unlock(&wd_lock);
++
++ MOD_INC_USE_COUNT;
++
++ /*
++ * Configure the chip to do a reset if the timer goes to 0.
++ * Set the clock divisor to 4096.
++ */
++
++ outw(0xfc, cpu_base + CPU_WDCNFG_REG);
++
++ /* Start the watchdog: It won't run until we write the TO reg. */
++ reset_wd();
++
++ return (0);
++}
++
++static int wd_release(struct inode *inode,
++ struct file *file)
++{
++ spin_lock(&wd_lock);
++
++ in_use = 0;
++
++ /*
++ * If graceful shutdown is not set, then don't bother to stop the
++ * watchdog timer. This handles the scenario where the user process
++ * that is poking the watchdog gets terminated due to some error
++ * (say a SEGV or some VM condition).
++ *
++ * In that case, the kernel would happily close the descriptor for
++ * us and leave us in a state where we aren't watching the dog...
++ *
++ * To work around this, the "graceful" sysctl prevents reset of the
++ * watchdog on close.
++ */
++ if (sysctl_wd_graceful)
++ outw(0, cpu_base + CPU_WDCNFG_REG);
++
++ spin_unlock(&wd_lock);
++ MOD_DEC_USE_COUNT;
++
++ return (0);
++}
++
++static ssize_t wd_write(struct file *file,
++ const char *data,
++ size_t len,
++ loff_t *ppos)
++{
++ /* Device is non-seekable. */
++ if (ppos != &file->f_pos)
++ return (-ESPIPE);
++
++ if (len > 0)
++ reset_wd();
++
++ return (len);
++}
++
++static struct file_operations wd_fops=
++{
++ owner: THIS_MODULE,
++ write: wd_write,
++ ioctl: wd_ioctl,
++ open: wd_open,
++ release: wd_release,
++};
++
++static struct miscdevice sc1x00wd_miscdev=
++{
++ WATCHDOG_MINOR,
++ "watchdog",
++ &wd_fops
++};
++
++static int __init wd_init(void)
++{
++ int ret;
++ struct pci_dev *dev;
++ unsigned int cw;
++
++ if (timeout < 1)
++ timeout = 1;
++ else if (timeout > 65535)
++ timeout = 65535;
++
++ if (graceful != 0)
++ graceful = 1;
++
++ sysctl_wd_timeout=timeout;
++ sysctl_wd_graceful=graceful;
++
++ if ((strcmp(boot_cpu_data.x86_vendor_id, "Geode by NSC") != 0)
++ || ((boot_cpu_data.x86_model != 4) && boot_cpu_data.x86_model != 9))
++ {
++ printk(KERN_WARNING "wd1100.c: This is not an SC1100 processor!\n");
++ return (0);
++ }
++
++ /* get the CONFIG BLOCK ADDRESS from scratch pad register */
++ dev = pci_find_device(SC1100_F5_VENDOR_ID,SC1100_F5_DEVICE_ID,0);
++ if (dev == NULL)
++ {
++ printk(KERN_ERR "wd1100.c: Can not find bridge device.\n");
++ return (0);
++ }
++
++ pci_read_config_dword(dev, 0x64, &cw);
++ cpu_base = (unsigned short )cw;
++
++#ifdef DEBUG_WD1100
++ printk("wd1100.c: CPU base = 0x%X\n", (unsigned int )cpu_base);
++#endif
++
++ printk(KERN_INFO "SC1x00 Watchdog driver by Inprimis Technolgies.\n");
++ /*
++ * We must call reboot_reason() to reset the flag in the WD.
++ *
++ * Even though it is available as an ioctl(), we call it during
++ * module initialization to perform the clear. You can take out
++ * the printk(), but don't take out the call to reboot_reason().
++ */
++ if (reboot_reason())
++ printk(KERN_INFO "Last reboot was by watchdog!\n");
++
++ spin_lock_init(&wd_lock);
++
++ ret = misc_register(&sc1x00wd_miscdev);
++ if (ret)
++ printk(KERN_ERR "wd1100.c: Can't register device.\n");
++ else
++ {
++ wd_table_header = register_sysctl_table(wd_root_table, 1);
++ if (wd_table_header == NULL)
++ printk(KERN_ERR "wd1100.c: Can't register sysctl.\n");
++ }
++
++ return 0;
++}
++
++static void __exit wd_exit(void)
++{
++ if (wd_table_header != NULL)
++ unregister_sysctl_table(wd_table_header);
++
++ misc_deregister(&sc1x00wd_miscdev);
++}
++
++EXPORT_NO_SYMBOLS;
++
++module_init(wd_init);
++module_exit(wd_exit);
++
++MODULE_LICENSE("GPL");
++
--- /dev/null
+diff -Nur linux-2.4.29/drivers/pci/pci.c linux-2.4.29_geode/drivers/pci/pci.c
+--- linux-2.4.29/drivers/pci/pci.c Wed Nov 17 12:54:21 2004
++++ linux-2.4.29_geode/drivers/pci/pci.c Tue Feb 15 23:41:54 2005
+@@ -1486,6 +1486,10 @@
+ for (func = 0; func < 8; func++, temp->devfn++) {
+ if (pci_read_config_byte(temp, PCI_HEADER_TYPE, &hdr_type))
+ continue;
++#ifdef CONFIG_MGEODE
++ if (hdr_type & 0x7f > PCI_HEADER_TYPE_CARDBUS)
++ continue;
++#endif
+ temp->hdr_type = hdr_type & 0x7f;
+
+ dev = pci_scan_device(temp);
+++ /dev/null
-# $Id$
-
-# soekris specific kmod packages
-
-$(eval $(call KMOD_template,NATSEMI,natsemi,\
- $(MODULES_DIR)/kernel/drivers/net/natsemi.o \
-,CONFIG_NATSEMI))
-$(eval $(call KMOD_template,WD1100,wd1100,\
- $(MODULES_DIR)/kernel/drivers/char/wd1100.o \
-,CONFIG_WD1100))
-
-
-$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux
- $(MAKE) -C $(LINUX_DIR) TOPDIR=$(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE)
- cp -f $(LINUX_DIR)/arch/i386/boot/bzImage $@
- touch $@
-
-compile: $(LINUX_BUILD_DIR)/bzImage
--- /dev/null
+# $Id$
+
+# soekris specific kmod packages
+
+$(eval $(call KMOD_template,NATSEMI,natsemi,\
+ $(MODULES_DIR)/kernel/drivers/net/natsemi.o \
+,CONFIG_NATSEMI))
+$(eval $(call KMOD_template,WD1100,wd1100,\
+ $(MODULES_DIR)/kernel/drivers/char/wd1100.o \
+,CONFIG_WD1100))
+
+
+$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux
+ $(MAKE) -C $(LINUX_DIR) TOPDIR=$(LINUX_DIR) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE)
+ cp -f $(LINUX_DIR)/arch/i386/boot/bzImage $@
+ touch $@
+
+compile: $(LINUX_BUILD_DIR)/bzImage
+++ /dev/null
-# Network configuration file
-
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth1 eth2"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname="eth0"
-wan_proto="dhcp"
+++ /dev/null
-# NVRAM overrides
-#
-# This file handles the NVRAM quirks of various hardware.
-# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
-
-# Load sysconf defaults
-[ -f /etc/sysconf ] && . /etc/sysconf
-
-DEFAULT_lan_proto="static"
-DEFAULT_lan_ifname="br0"
-DEFAULT_lan_ifnames="eth0"
-DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
-DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
-DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
-
-# failsafe if reset is held
-[ "$FAILSAFE" = "true" ] && {
- echo "### YOU ARE IN FAILSAFE MODE ####"
- lan_ifname=${DEFAULT_lan_proto}
- lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}}
- lan_ipaddr=$DEFAULT_lan_ipaddr
- lan_netmask=$DEFAULT_lan_netmask
- lan_hwaddr=$DEFAULT_lan_hwaddr
- wan_ifname="none"
- wifi_ifname="none"
-}
--- /dev/null
+# Network configuration file
+
+## LAN configuration
+lan_ifname="br0"
+lan_ifnames="eth1 eth2"
+lan_proto="static"
+lan_ipaddr="192.168.1.1"
+lan_netmask="255.255.255.0"
+
+## WAN configuration
+wan_ifname="eth0"
+wan_proto="dhcp"
--- /dev/null
+# NVRAM overrides
+#
+# This file handles the NVRAM quirks of various hardware.
+# THIS FILE IS NOT A REPLACEMENT FOR NVRAM
+
+# Load sysconf defaults
+[ -f /etc/sysconf ] && . /etc/sysconf
+
+DEFAULT_lan_proto="static"
+DEFAULT_lan_ifname="br0"
+DEFAULT_lan_ifnames="eth0"
+DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"}
+DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"}
+DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"}
+
+# failsafe if reset is held
+[ "$FAILSAFE" = "true" ] && {
+ echo "### YOU ARE IN FAILSAFE MODE ####"
+ lan_ifname=${DEFAULT_lan_proto}
+ lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}}
+ lan_ipaddr=$DEFAULT_lan_ipaddr
+ lan_netmask=$DEFAULT_lan_netmask
+ lan_hwaddr=$DEFAULT_lan_hwaddr
+ wan_ifname="none"
+ wifi_ifname="none"
+}
projects / openwrt / openwrt.git / commitdiff