mediatek: filogic: migrate Zyxel NWA50AX Pro to upstream PHY LED control

This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. There should be no functional changes.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>

diff --git a/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts b/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts
index 95247eba9d7d6a46369bb51399a922448e8a5dc6..ef72ca4ba37b79c9b9712f32b86e5477818095a9 100644 (file)
--- a/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts
+++ b/target/linux/mediatek/dts/mt7981b-zyxel-nwa50ax-pro.dts
@@ -85,8 +85,22 @@
                reg = <5>;
                compatible = "ethernet-phy-ieee802.3-c45";
 
-               /* LED0: Amber ; LED1: nc ; LED2: nc ; LED3: Green */
-               mxl,led-config = <0x3b0 0x0 0x0 0x3c0>;
+               leds {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       led-0 {
+                               reg = <0>;
+                               color = <LED_COLOR_ID_AMBER>;
+                               function = LED_FUNCTION_WAN;
+                       };
+
+                       led-3 {
+                               reg = <3>;
+                               color = <LED_COLOR_ID_GREEN>;
+                               function = LED_FUNCTION_WAN;
+                       };
+               };
        };
 };
 

diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
index 4e1d10a4dcc196ceffe98ef324a1b5f930cc0f31..3287cfe29b70bb605488355ebe8e6db2f69db036 100644 (file)
--- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
+++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -150,6 +150,10 @@ zyxel,ex5601-t0-ubootmod)
        ucidef_set_led_netdev "wifi-24g" "WIFI-2.4G" "green:wifi24g" "phy0-ap0" "link tx rx"
        ucidef_set_led_netdev "wifi-5g" "WIFI-5G" "green:wifi5g" "phy1-ap0" "link tx rx"
        ;;
+zyxel,nwa50ax-pro)
+       ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:amber:wan" "eth0" "link_10 link_100 link_2500 tx rx"
+       ucidef_set_led_netdev "uplink" "UPLINK" "mdio-bus:05:green:wan" "eth0" "link_1000 link_2500 tx rx"
+       ;;
 esac
 
 board_config_flush