mobipromo,cm520-79f)
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
;;
- mikrotik,wap-ac)
+ mikrotik,wap-ac|\
+ mikrotik,wap-ac-lte|\
+ mikrotik,wap-r-ac)
ucidef_set_interface_lan "sw-eth1 sw-eth2"
;;
netgear,rbr50|\
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,sxtsq-5-ac |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
mikrotik,hap-ac2 |\
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
mikrotik,hap-ac3 |\
mikrotik,hap-ac3-lte6-kit |\
mikrotik,sxtsq-5-ac |\
- mikrotik,wap-ac)
+ mikrotik,wap-ac |\
+ mikrotik,wap-ac-lte |\
+ mikrotik,wap-r-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
;;
- mikrotik,wap-ac)
+ mikrotik,wap-ac|\
+ mikrotik,wap-ac-lte|\
+ mikrotik,wap-r-ac)
base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
ip link set dev sw-eth1 address "$base_mac"
ip link set dev sw-eth2 address $(macaddr_add "$base_mac" 1)
mikrotik,hap-ac3-lte6-kit|\
mikrotik,lhgg-60ad|\
mikrotik,sxtsq-5-ac|\
- mikrotik,wap-ac)
+ mikrotik,wap-ac|\
+ mikrotik,wap-ac-lte|\
+ mikrotik,wap-r-ac)
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2022, Alexander Couzens <lynxis@fe80.eu> */
+
+#include "qcom-ipq4018-wap-ac.dtsi"
+
+/ {
+ model = "MikroTik wAP ac LTE";
+ compatible = "mikrotik,wap-ac-lte";
+
+ soc {
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+ };
+ };
+};
+
+&tlmm {
+ enable-usb-power {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enable USB power";
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
+#include "qcom-ipq4018-wap-ac.dtsi"
/ {
model = "MikroTik wAP ac";
compatible = "mikrotik,wap-ac";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x08000000>;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- aliases {
- led-boot = &led_user;
- led-failsafe = &led_user;
- led-running = &led_user;
- led-upgrade = &led_user;
- };
-
- soc {
- counter@4a1000 {
- compatible = "qcom,qca-gcnt";
- reg = <0x4a1000 0x4>;
- };
-
- tcsr@1949000 {
- compatible = "qcom,tcsr";
- reg = <0x1949000 0x100>;
- qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
- };
-
- ess_tcsr@1953000 {
- compatible = "qcom,tcsr";
- reg = <0x1953000 0x1000>;
- qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
- };
-
- tcsr@1957000 {
- compatible = "qcom,tcsr";
- reg = <0x1957000 0x100>;
- qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- power {
- label = "blue:power";
- gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- led_user: user {
- label = "green:user";
- gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
- panic-indicator;
- };
- };
-};
-
-&prng {
- status = "okay";
-};
-
-&tlmm {
- serial_pins: serial_pinmux {
- mux {
- pins = "gpio60", "gpio61";
- function = "blsp_uart0";
- bias-disable;
- };
- };
-
- spi_0_pins: spi_0_pinmux {
- pin {
- function = "blsp_spi0";
- pins = "gpio55", "gpio56", "gpio57";
- drive-strength = <2>;
- bias-disable;
- };
- pin_cs {
- function = "gpio";
- pins = "gpio54";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-};
-
-&blsp_dma {
- status = "okay";
-};
-
-&blsp1_spi1 {
- status = "okay";
-
- pinctrl-0 = <&spi_0_pins>;
- pinctrl-names = "default";
- cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- reg = <0>;
- compatible = "jedec,spi-nor";
- spi-max-frequency = <40000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "Qualcomm";
- reg = <0x0 0x80000>;
- read-only;
- };
-
- partition@80000 {
- compatible = "mikrotik,routerboot-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- label = "RouterBoot";
- reg = <0x80000 0x80000>;
-
- hard_config {
- read-only;
- size = <0x2000>;
- };
-
- dtb_config {
- read-only;
- };
-
- soft_config {
- };
- };
-
- partition@100000 {
- compatible = "mikrotik,minor";
- label = "firmware";
- reg = <0x100000 0xf00000>;
- };
- };
- };
-};
-
-&blsp1_uart1 {
- status = "okay";
-
- pinctrl-0 = <&serial_pins>;
- pinctrl-names = "default";
-};
-
-&cryptobam {
- status = "okay";
-};
-
-&crypto {
- status = "okay";
-};
-
-&watchdog {
- status = "okay";
-};
-
-&mdio {
- status = "okay";
-};
-
-&gmac {
- status = "okay";
-};
-
-&switch {
- status = "okay";
-};
-
-&swport4 {
- status = "okay";
- label = "sw-eth2";
-};
-
-&swport5 {
- status = "okay";
- label = "sw-eth1";
-};
-
-&wifi0 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
-};
-
-&wifi1 {
- status = "okay";
-
- qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2020, Robert Marko <robimarko@gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x08000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ led-boot = &led_user;
+ led-failsafe = &led_user;
+ led-running = &led_user;
+ led-upgrade = &led_user;
+ };
+
+ soc {
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "blue:power";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ led_user: user {
+ label = "green:user";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+ };
+};
+
+&prng {
+ status = "okay";
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ pin_cs {
+ function = "gpio";
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Qualcomm";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "RouterBoot";
+ reg = <0x80000 0x80000>;
+
+ hard_config {
+ read-only;
+ size = <0x2000>;
+ };
+
+ dtb_config {
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+
+ partition@100000 {
+ compatible = "mikrotik,minor";
+ label = "firmware";
+ reg = <0x100000 0xf00000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&watchdog {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+};
+
+&gmac {
+ status = "okay";
+};
+
+&switch {
+ status = "okay";
+};
+
+&swport4 {
+ status = "okay";
+ label = "sw-eth2";
+};
+
+&swport5 {
+ status = "okay";
+ label = "sw-eth1";
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-wAP-ac";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2022, Alexander Couzens <lynxis@fe80.eu> */
+
+#include "qcom-ipq4018-wap-ac.dtsi"
+
+/ {
+ model = "MikroTik wAP R ac";
+ compatible = "mikrotik,wap-r-ac";
+
+ soc {
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ usb3@8af8800 {
+ status = "okay";
+
+ dwc3@8a00000 {
+ phys = <&usb3_hs_phy>;
+ phy-names = "usb2-phy";
+ };
+ };
+ };
+};
+
+&tlmm {
+ enable-usb-power {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enable USB power";
+ };
+};
+
+&usb3_hs_phy {
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += mikrotik_wap-ac
+
+define Device/mikrotik_wap-r-ac
+ $(call Device/mikrotik_wap-ac)
+ DEVICE_MODEL := wAP R ac
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
+ kmod-usb-acm kmod-usb-net-rndis
+ DEVICE_DTS := qcom-ipq4018-wap-r-ac
+endef
+TARGET_DEVICES += mikrotik_wap-r-ac
+
+define Device/mikrotik_wap-ac-lte
+ $(call Device/mikrotik_wap-ac)
+ DEVICE_MODEL := wAP ac LTE
+ DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi \
+ kmod-usb-acm kmod-usb-net-rndis
+ DEVICE_DTS := qcom-ipq4018-wap-ac-lte
+ DEVICE_ALT0_VENDOR = Mikrotik
+ DEVICE_ALT0_MODEL := wAP ac LTE6
+endef
+TARGET_DEVICES += mikrotik_wap-ac-lte
projects / openwrt / staging / thess.git / commitdiff